Thank you! my Keurig overheated last year, so I bought a new one. This year, the same thing happened, but this time I found your video. It worked like a charm, but taking the appliance apart is tricky. Resetting the thermal switch itself is easy. I also figured out, because I left the empty water tank with the filter in it while away, the filter dried out and wouldn’t allow water to flow from my tank to the machine causing it to overheat on my first attempt to make coffee again…Lesson learned! Thanks for salvaging an otherwise good coffeemaker!
Thank you for the video, watching you struggle with the cover gave me the patients to work it off. Thanks to you I spent less time removing the cover than hunting down a paper clip. The reset worked like a charm.
I called the company to ask for help, but I didn't get a satisfactory answer, so I was just frustrated and was about to throw it away. Before doing that, I watched your video and followed it, and now I feel like I've got a brand new machine that works perfectly! Thank you so much!
I have this exact Keurig and it was hardly used, but stopped turning on after having been stored for a year. I tried this and it fixed the problem. I almost threw it away. Had no problem doing this as your video was so easy to follow. Thank you so much for sharing.
I'm praying it works for me. I've had mine on a shelf in storage since last winter. Just got it out to get it ready for Fall and it won't power on at all. Had this happen before, threw the old one away and bought a new one last year so this is fairly new. Praying. I'm about to try this now.
After brewing 4 cups it no longer turned on. It was given to me and I found your video and the fix you posted 100% worked. Thank you for posting this fix. Love it when people share to make life easier for everyone!
That’s exactly what my Keurig did right after I descaled it. Keurig sent me one to replace it bc it was only 3 months old. It was quite a process to go through. Keurig also stated that I would only have 1 replacement. I think that is reasonable but when my replacement ceases to work I will definitely buy from a different manufacturer. My first Keurig lasted 10 years. The new Keurigs are cheaply built and not reliable.
🎉🎉🎉 I really appreciate this video because it saves me so much money. I did not have to replace my Keurig due to this video. I stood up to 3 AM in the morning to get this done and it’s working yay thank you.
Yo! I don’t have a supreme, the bottom says K26. Took it apart, found a white disk, paper clipped it, put it back together and it worked! I only have 5 little pieces of plastic from broken clips. LOL Considering it was 5 minutes away from the trash can, I’ll take it. Thank you so much for making this video!!!!
Thank you for posting this video! I had started a cup, went outside for a minute and came back to an empty cup and a machine that wouldn’t turn back on. After watching your video a couple of times, I was able to disassemble the outer cover and used a dental scaler to push inside the hole in the thermalcouple… it didn’t work the first time, then I just pushed harder inside that hole and i turned it on. Thanks again!
my name is Francisco, i was looking for a video like this one, my keurig broke, and costing over 100, i want to to try this before giving my money away, so, if works or not after, thanks so much, for sharing your knowledge.! have a blessed day.!
So I have the same one as you and it’s just stopped working when I was going to make some coffee and I thought it actually broke so I did the steps that you just did and I fixed mines and it turns on and works now. Thank you so much.
No problem, it may last much longer without any further issues or it might be a early sign of a failing pump. I’m so happy to hear that you were able to get the coffee flowing once again.
I don't understand why they couldn't have made it user resettable with an LED or other indicator that tells you something is wrong. Maybe they could have even listed in the instruction manual why this happens. You shouldn't have to open up the whole thing or assume that it's completely broken. Great video.
I just tried this out, and it seemed to have got it working again it turned on but seconds later it smelt like burnt fuze, I dont want to tamper with it any more dont want to start a fire but for sure thankful for your help i know it must work only mine is probably just due for replacement.
great video, thank you! unfortunately this is not what's wrong with my Keurig 920 supreme. when brewing , water doesn't come out just in center, but splashes five drips, not one down center. i have purchased silicone washers that fit on the multi pore needles. waiting to see it this helps. Good you tell me what could be wrong?
As I mentioned, same problem here. I called customer service. They asked a couple questions, let me through basic steps, said it couldn't be fixed, checked warranty (expired less than a year ago. They offered a discount on a replacement. I declined that as we already have a substitute. They send me a coupon to order a box of up to 24 Keurig K-cups, including shipping. Total value: ca. $18.
I tried this 3xs (resetting the thermostat) and it will work as in that it turns on once I plug it in but then it dies on me again! I just think that my keurig is defective 😞. I’ve already cleaned out the needles and rinsed the filter and all.
I did everything in the video but when when I press the center of thermocoupler, nothing. There's no click, no nothing. What am I doing wrong? WAIT A MINUTE! I did it!!! Thanks Outside with Jeff.
Who’s doing all this?! I was so happy when I 1st started the video bc you explained it as if it would be so easy to get the bottom off. Then you proceeded to do literal brain surgery 😢 I guess I’ll be buying another one bc doing all this if you’re not very very skilled is doing more harm than good.
It’s not really all that complicated. It can be fixed in less than 30 minutes and to me that’s better than spending another $90. If it does seem way too complex try to contact Keurig to see if they will send you a new one or sell one to you at a discount. Best wishes Outside With Jeff
@@outsidewithjeff thanks Jeff! I actually called Keurig today and they are sending me a new one at no cost. Apparently they are aware of this issue with their machines turning off. I’ve seen tons of other threads about the same issue as well, which prompted me to come to YT. I was happy it was a seamless process to get a new one tho!
About 3 years ago I had the descale light go on my Keurig, so I bought the chemicals made by Keurig and followed the exact instructions on the bottle, but when I went back after 30 min to rinse the machine it would not turn on. So I called Keurig to trouble shoot and they told me the machine would never restart but they could offer me 50% off on a new machine from their site. I bought one and a year and a half later, descale light comes on.....I pull the solution out of the cabinet and follow the instructions and what do you know, the machine doesn't turn back on after you follow the directions to run through multiple cycles it overheats the machine and trips the thermal sensor button. So I call Keurig again, well Mam you are past your one year warranty so we can offer you 50% off a new machine. GRRRR they couldn't put the damn button somewhere accessible on the outside of the machine if they know this happens regularly because they would never make any damn money.....much less care about all the additional waste in the landfill because people buy a new machine and throw out the old one for something that can be fixed with the push of a button!!!! THANK YOU Jeff , I am so glad I found this video, my machine is now working again and I will never buy any more Keurig descale solution and follow their stupid, misleading directions.....instead I plan on using cleaning vinegar and water once a week to maintain the machine and if this happens again I know how to fix it without paying Keurig more money. You are a lifesaver and I am now a subscriber!
I reset mine, and now when I try to power it on the 12oz light stays on and the power light blinks 2-3 times then turns off instantly within seconds. I tried to hold the 12 oz and pour button and the machine starts to manually pour but only pours cold water, this leads me to believe that my heating element could have died. and this was only after less than 6 months of daily use . what lead to me having to reset it in the first place, was after I finished the descaling process.
I had mine for 2 years before mine finally broke today. Actually surprised as I gone through two of them and one before lasted 4 years. Guess the quality has gone down for Compact version.
I have Keurig Slim & I haven’t used it in a year bcuz it was in Storage. I plugged it up last wk & it powered on but I just turned it off bcuz I wasn’t ready to use it. My son went to use it several days later & didn’t add water to reservoir. He did just that, then it wouldn’t power on? I unplugged it & im gonna let it sit for an hour. If it still doesn’t power on I will take these steps to reset it. I’ve had it for just a couple of yrs & it already needs a reset!🤷🏽♀️🤦🏽♀️
Thank you! my Keurig overheated last year, so I bought a new one. This year, the same thing happened, but this time I found your video. It worked like a charm, but taking the appliance apart is tricky. Resetting the thermal switch itself is easy. I also figured out, because I left the empty water tank with the filter in it while away, the filter dried out and wouldn’t allow water to flow from my tank to the machine causing it to overheat on my first attempt to make coffee again…Lesson learned! Thanks for salvaging an otherwise good coffeemaker!
Happy to help, please subscribe to help my channel continue to grow.
Thank you for the video, watching you struggle with the cover gave me the patients to work it off. Thanks to you I spent less time removing the cover than hunting down a paper clip. The reset worked like a charm.
I’m happy to help
I called the company to ask for help, but I didn't get a satisfactory answer, so I was just frustrated and was about to throw it away. Before doing that, I watched your video and followed it, and now I feel like I've got a brand new machine that works perfectly! Thank you so much!
I’m so happy to hear that.
I have this exact Keurig and it was hardly used, but stopped turning on after having been stored for a year. I tried this and it fixed the problem. I almost threw it away. Had no problem doing this as your video was so easy to follow. Thank you so much for sharing.
Thank you for the kind words
I'm praying it works for me. I've had mine on a shelf in storage since last winter. Just got it out to get it ready for Fall and it won't power on at all. Had this happen before, threw the old one away and bought a new one last year so this is fairly new. Praying. I'm about to try this now.
After brewing 4 cups it no longer turned on. It was given to me and I found your video and the fix you posted 100% worked. Thank you for posting this fix. Love it when people share to make life easier for everyone!
Glad it helped
This worked perfectly for me (after I wrestled the cover off!), Thank you for an excellent video and saving the cost of a new Keurig
Glad it helped!
That’s exactly what my Keurig did right after I descaled it. Keurig sent me one to replace it bc it was only 3 months old. It was quite a process to go through. Keurig also stated that I would only have 1 replacement. I think that is reasonable but when my replacement ceases to work I will definitely buy from a different manufacturer. My first Keurig lasted 10 years. The new Keurigs are cheaply built and not reliable.
That’s a perfect description of todays Keurig quality.
Mine was from Christmas. Cleaned it then it wouldnt turn back on. So i took it apart and reset it.
Mine was 3 months old. It didn’t need cleaning. It needed a new a circuit
Oh dang.
🎉🎉🎉 I really appreciate this video because it saves me so much money. I did not have to replace my Keurig due to this video. I stood up to 3 AM in the morning to get this done and it’s working yay thank you.
I’m so happy to have been able to help you.
Did it and it worked. Thank you! You totally saved me some money today.
❤️
Yo! I don’t have a supreme, the bottom says K26. Took it apart, found a white disk, paper clipped it, put it back together and it worked! I only have 5 little pieces of plastic from broken clips. LOL Considering it was 5 minutes away from the trash can, I’ll take it. Thank you so much for making this video!!!!
That’s awesome I’m so glad you were successful as well.
Thank you for posting this video! I had started a cup, went outside for a minute and came back to an empty cup and a machine that wouldn’t turn back on. After watching your video a couple of times, I was able to disassemble the outer cover and used a dental scaler to push inside the hole in the thermalcouple… it didn’t work the first time, then I just pushed harder inside that hole and i turned it on. Thanks again!
Awesome!! It’s always a bad day when coffee is delayed 😂
Thank you for your video! Saved me having to buy a new machine. Well done.
I’m so happy it helped, please consider subscribing to help me grow my channel
my name is Francisco, i was looking for a video like this one, my keurig broke, and costing over 100, i want to to try this before giving my money away,
so, if works or not after, thanks so much, for sharing your knowledge.!
have a blessed day.!
Happy to have been helpful, I hope it all works out for you.
8:18 is where the show begins.
You're welcome folks...
😂 spoiler alert 🚨 😂
Thank you for your post I was able to open up my Keurig and find the reset. Works like a charm.
I’m so happy to hear that you’re back to making coffee. Please subscribe to help me grow my channel. Thank you 😊
Thank you. Followed your steps and it's alive and perking again. All the best.
Awesome coffee is life
So I have the same one as you and it’s just stopped working when I was going to make some coffee and I thought it actually broke so I did the steps that you just did and I fixed mines and it turns on and works now. Thank you so much.
No problem, it may last much longer without any further issues or it might be a early sign of a failing pump. I’m so happy to hear that you were able to get the coffee flowing once again.
amazing.i just fixed my kids coffee machine!!!!the hardest part was dismantling.but it works
Yes the pain in the butt part is taking it apart without breaking the plastic after that ez peasy!
Thank you so much you saved my dad a hundred bucks
Awesome
just had ours not turn on; I figure this is the fix. Thanks for the video!
Excellent 👍🏻👍🏻
Thanks man, you just saved me buying another one! Liked and subscribed!!
Thanks for the sub!
I don't understand why they couldn't have made it user resettable with an LED or other indicator that tells you something is wrong. Maybe they could have even listed in the instruction manual why this happens. You shouldn't have to open up the whole thing or assume that it's completely broken. Great video.
I agree 100% about it should be easier to access. Like at most a cover that easily opens to access the button.
Wow did work sir!! I have a different model but has that white switch!! Thank you so so much!!
Awesome
Worked like a charm!! Thanks
Glad it helped!
Thank you so much. You just saved me $130
I’m very happy it was helpful for you. Please consider subscribing to help me grow my channel. Thank you so much.
Thanks, I fixed one before I saw yours, and I told her to keep water level at half or better.
Nice work!
I have an issue where the handle wont stay down after adding the pod. Wife had dropped an broke reservoir which we replaced any thoughts? Thanks Ron
Any chance the pod isn’t lines up or the handle is crooked so gets in a bind.
I’m subbing because you saved me $100.00+. This worked like a charm!
I appreciate that!
I just tried this out, and it seemed to have got it working again it turned on but seconds later it smelt like burnt fuze, I dont want to tamper with it any more dont want to start a fire but for sure thankful for your help i know it must work only mine is probably just due for replacement.
Your pump is bad and the heater is running without water in it because of that.
Thank you. We just fixed ours this morning. 😊
Awesome
Excellent Job Good sir Thank you! Coffee = Happy Wife
Same here- coffee is great!!!
Is it same procedure for the k-supreme plus (same innards).
Yes should be
great video, thank you! unfortunately this is not what's wrong with my Keurig 920 supreme. when brewing , water doesn't come out just in center, but splashes five drips, not one down center. i have purchased silicone washers that fit on the multi pore needles. waiting to see it this helps. Good you tell me what could be wrong?
Sorry to hear that
This fixed my keurig!!
Heck Yeah!!
Works again thank yiu
Awesome, I’m happy to be able to help.
Thank you so much for making this video! I was able to get my Keurig working again!
Heck yes!!
Thanks buddy i was about tops my Kerrigan and get a coffee pot
Heck yeah
Exactly what I was looking for! Thank you so much!!
Glad I could help! Consider Subscribing please
Good video. FYI when you loosen up the bottom the back piece on hooks and makes it easier for the case to come apart.
Appreciate the feedback
Thanks , it worked for me too. I wonder how long it will continue to work ?
Mine worked for quite. While before I had to do anything else to it.
Wait a minute so I have to do all of this when I buy it from the store just so I can get it working?
You have to do this when it messes up usually 1 day after the warranty expires
Very helpful.. that did the trick
Heck yea
Awesome Video! Once I reset my Keurig tries to pump water it overheats and trips again.
I’ll keep trying, think I let it sit for too long.
It either needs another attempt or your pump is out or ran dry and needs primed to pull water correctly.
Does this work with the mini keurig?
Yes
Please increase your sound, it was hard to hear you. The information was very useful.
Thank you
My Keurig stopped working. The power on light works but the K and other buttons don't turn on. Do you know what could be done to fix this? Thank you.
Not real sure without looking at it. Sorry
Same problem here.
Same problem
Only light working is the power light, nothing else works. Won’t brew 😢
As I mentioned, same problem here. I called customer service. They asked a couple questions, let me through basic steps, said it couldn't be fixed, checked warranty (expired less than a year ago. They offered a discount on a replacement. I declined that as we already have a substitute. They send me a coupon to order a box of up to 24 Keurig K-cups, including shipping. Total value: ca. $18.
My keurig is brand new right out of the box. It lights up but won't do anything... I tried to see it was an altitude issue but it still won't work.
Definitely take it back
Thanks !!!!
I’m happy to help.
Couldn’t get pass the disassembly mine is a little different didn’t wanna break it more
If it’s already broke and out of warranty then I’d just take it apart anyway and see if you can fix it.
I tried this 3xs (resetting the thermostat) and it will work as in that it turns on once I plug it in but then it dies on me again! I just think that my keurig is defective 😞. I’ve already cleaned out the needles and rinsed the filter and all.
Your pump is bad
I have try this but it won't turn on it only blinks and then shuts off it was working yesterday
Not sure
Probably water pump, need to open mine up again, and get the serial number for the water pump, they go from 20 to 30$
I did everything in the video but when when I press the center of thermocoupler, nothing. There's no click, no nothing. What am I doing wrong?
WAIT A MINUTE! I did it!!! Thanks Outside with Jeff.
It means that you have a different issue because your thermocouple doesn’t need reset. Sorry this did not fix your machine.
@@outsidewithjeff I did it Jeff, you're right, man, thanks a lot!
Heck yes
thank youuu
Happy to help
Thanks fixed the wifes morning java machine.
Heck yeah!
i’ve done all this but every time i heat up water the thermo blows
Your pump is failing.
@@outsidewithjeff thank you
@Fin3sse no problem
We can't get it reassembled!
Just look closely flat what it’s getting hung up or caught on and move it out of the way. It will go back together
I did all this and it worked for half a cup then the thermocoupler tripped again. Then the thermocoupler would not reset.
Wow, Keurig is definitely not making quality right now.
Who’s doing all this?! I was so happy when I 1st started the video bc you explained it as if it would be so easy to get the bottom off. Then you proceeded to do literal brain surgery 😢 I guess I’ll be buying another one bc doing all this if you’re not very very skilled is doing more harm than good.
It’s not really all that complicated. It can be fixed in less than 30 minutes and to me that’s better than spending another $90. If it does seem way too complex try to contact Keurig to see if they will send you a new one or sell one to you at a discount. Best wishes Outside With Jeff
@@outsidewithjeff thanks Jeff! I actually called Keurig today and they are sending me a new one at no cost. Apparently they are aware of this issue with their machines turning off. I’ve seen tons of other threads about the same issue as well, which prompted me to come to YT. I was happy it was a seamless process to get a new one tho!
That’s Awesome!!
That was so hard to take apart…no wonder landfills are so filled with junk.
You’re 100% right about that.
About 3 years ago I had the descale light go on my Keurig, so I bought the chemicals made by Keurig and followed the exact instructions on the bottle, but when I went back after 30 min to rinse the machine it would not turn on. So I called Keurig to trouble shoot and they told me the machine would never restart but they could offer me 50% off on a new machine from their site. I bought one and a year and a half later, descale light comes on.....I pull the solution out of the cabinet and follow the instructions and what do you know, the machine doesn't turn back on after you follow the directions to run through multiple cycles it overheats the machine and trips the thermal sensor button. So I call Keurig again, well Mam you are past your one year warranty so we can offer you 50% off a new machine. GRRRR they couldn't put the damn button somewhere accessible on the outside of the machine if they know this happens regularly because they would never make any damn money.....much less care about all the additional waste in the landfill because people buy a new machine and throw out the old one for something that can be fixed with the push of a button!!!! THANK YOU Jeff , I am so glad I found this video, my machine is now working again and I will never buy any more Keurig descale solution and follow their stupid, misleading directions.....instead I plan on using cleaning vinegar and water once a week to maintain the machine and if this happens again I know how to fix it without paying Keurig more money. You are a lifesaver and I am now a subscriber!
I’m so happy to hear that I was able to turn around your nightmare coffee situation into a good situation.
We have become so gullible that manufacturers don’t even give a damn any more
Yep they make crap products and we have to learn how to fix them.
Did this and it still didnt turn on 😢
Possibly a bad control board. Call Keurig and see if it’s still under warranty.
I reset mine, and now when I try to power it on the 12oz light stays on and the power light blinks 2-3 times then turns off instantly within seconds. I tried to hold the 12 oz and pour button and the machine starts to manually pour but only pours cold water, this leads me to believe that my heating element could have died. and this was only after less than 6 months of daily use . what lead to me having to reset it in the first place, was after I finished the descaling process.
They definitely do not make a quality machine.
I had mine for 2 years before mine finally broke today. Actually surprised as I gone through two of them and one before lasted 4 years. Guess the quality has gone down for Compact version.
Oh heck no I'm to
Huh
It didn’t turn on
You must have a bad control board. Contact keurig and see if you are still covered under the warranty time period.
I have Keurig Slim & I haven’t used it in a year bcuz it was in Storage. I plugged it up last wk & it powered on but I just turned it off bcuz I wasn’t ready to use it. My son went to use it several days later & didn’t add water to reservoir. He did just that, then it wouldn’t power on? I unplugged it & im gonna let it sit for an hour. If it still doesn’t power on I will take these steps to reset it.
I’ve had it for just a couple of yrs & it already needs a reset!🤷🏽♀️🤦🏽♀️
If it runs without water the safety reset will trip so most likely you will need to do the repair in this video. Have a good day.
Wound not buy another until it is repair friendly. Seems it is designed to prevent repair.
agreed
This coffee makers are a piece of shit I will never buy another.
I agree 💯
He goes to fast taking it apart. Couldn't see what or how he was doing it
Rewind and play parts that you need to see again.
Didn’t work
Your control board must be shot. Contact keurig and see what they can do as far as sending you a new unit. It’s a known issue.
Too much work, just bought another one and returned the old one..will NOT buy again
Yeah, it only takes like 15 minutes but I get it.
I can't get the cover off. Oh well, buy a new one it is!
😢
Who else after hearing the water had to go pee?
😂