AG01 MINI CNC Hall Gimbals - bit.ly/3KG1BFs Sticky360 Gimbal Stick Ends - bit.ly/3wi5MDJ Sticky360 Mini Gimbal Stick Ends - bit.ly/3Ll8lJc Zorro Carry Case - bit.ly/3MpOBpq 🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks! 💲 If you enjoy my content, please support my channel through these links Patreon - www.patreon.com/albertkim Amazon - amzn.to/3zq84zp RaceDayQuads - bit.ly/RDQ-BF Pyrodrone - bit.ly/3Bfo3BP Banggood - bit.ly/3imXlie Airblade - bit.ly/3ilYVRr NewBeeDrone - bit.ly/3BhFdPu Makerfire - bit.ly/2VGI3Kg Aliexpress - bit.ly/3im17IF XT-XINTE - bit.ly/3inl7KQ Insta360 - bit.ly/2VRDNe5 PayPal - paypal.me/marblekit 👉 Old gear for sale here - bit.ly/AlbertGearFS 👉 Follow me on social 🐤 twitter.com/albertkim 📸 instagram.com/marblekit/
I switched to AG01 on my boxer. I am a daily flyer and I was curious. More importantly, AG01 stick ends are plain uncomfortable meat tube grinders. I ended up putting the original Boxer sticks back on the AG01 gimbals. Feel is good now but I am pretty sure it was more a want than a need!
While I’m not in the market for a radio, the fact that they make cool upgrade like this available would definitely steer me in their direction. I hope that they send Albert a replacement Zorro soon!
I had to take mine apart shortly after getting it to deal with a bad two position switch and it turned out the internal JSTs don't fit snugly. You might have a loose connection because the connectors are a hair too loose for the pins they used.
I got just a little sand on my TX12. Now the gimbals grinds and sticks a little. I was like, mini gimbals the same cost as the radio, no way. Now I can't wait to order them for replacement.
The eyelet that holds the lanyard on the Zorro came off on mine last night while I was changing batteries on a drone. The radio was hanging from my neck and hit the ground right on the arm switch. It still works but this morning I tried to get the screw out that was flopping around inside out. Dude what a nightmare. That radio is seriously crammed full of stuff. I ended up just shaking it out so I didn’t have to take it apart. Be aware of this problem everyone. I’ve only had mine less then a couple months. Great reviews as always Albert. Sorry about your Zorro. 😟
@@saharmesri1810 absolutely, but getting inside the radio deep enough to reach the screw is basically taking it completely apart. After I looked inside, I was like, Hell No! So I emailed Radiomaster and let them know about this issue. My arm switch is super bent but it works. I’m all in on ELRS but this sucked and getting another radio right after I just bought this one was not on my list of priorities. If I ever decide to upgrade the gimbals, I’ll replace the screw and add locktite, and probably the bent up switch as well. I’m bummed though. It’s brand new and I like to keep my things nice.
@@PoodlehawkFPV Yeah, it's sad when a shiny new purchase gets messed up through no fault of your own. Did the eyelet feel loose at all before it fell off? Mine feels pretty tight, it's actually slightly off-center but I haven't attempted to realign because it's on tight and I didn't want to mess with it. Thanks for letting everyone here know about the issue, sounds like for now people shouldn't 100% rely on that screw to hold up and address the issue if they ever need to open up the radio for something else.
@@saharmesri1810 yeah, I hope it doesn’t happen to anyone else. Hopefully Radiomaster will start putting locktite on the next batch. Honestly I didn’t feel anything when it went. It felt snug and my NewBeeDrone lanyard fit perfectly. I really like the performance of the radio so far, but this sucked for sure.
Great review. I'd be interested in swapping them our for when my DJI FPV radio gives out, but I suspect it won't work. Thanks for the review. Much appreciated. Respect Albert Respect !!!! Still keeping it real!!!!!!
@@Adam_Carbone A open question. Does anybody know if DJI FPV Radio GYMBALS can be replaced? Does anyone have any links to any video of someone who has replaced their DJI FPV gimbals (STICKS)?
Nice review thanks On a side note: I dont know how people fly accurate by using thumbs?????? To me I see it is like writing, tape a pen to you thumb and try to draw a straight line between two parallel lines or even just try to neatly write and then try and use two fingers to draw with a pen, you will be 100 times more accurate and precise. Maybe I am too old school and all you younger lot learnt to use thumbs for everything???
I find thumbs easier to fly because I feel like you have better references. I find pinching uncomfortable while also holding the radio, and if I'm not holding it then my hand doesn't have as good of a reference for where the stick is. With thumbing the way the stick end rolls on the tip of my thumb also helps keep track of what angle the stick is at, hence what position it is in. On top of that I can move the sticks faster with thumbs, though that may be due to a lack of practice with pinching.
With the Frsky grand lotus stick ends thumbing is perfect for me. I never pinch probably because I grew up playing games with analog sticks that are too wide to pinch. I never have issues with slipping off or being inaccurate ripping tight corners in my dense backyard. Kids these days are thumbin'!!
Yeah I understand you guys can, but I guess it's like hand guns too, I use two hands to shoot accurately, it's a push pull scenario that makes it accurate, same with sticks on a remote controller pinching makes for push pull thats not to say people cant shoot with one hand, I know they can, its just that it is more accurate and repeatable using 2. Like a needle pulling a splinter out of your skin, sure you could do it with your thumb, but its just more precise when using thumb and index finger.
Bummer about your radio. Is there an option to get it repaired, is it worth paying to repair? I'm very happy with the full size ag01 gimbals in my Tx16s. Anyone on a budget, they're a luxury not a necessity. I'm waiting on my preferred stick ends. The Frsky Vatac Lotus in black. I'm a hybrid pincher. Happy flying everyone 🤓
This is why I love your videos so detailed thanks for the review I wanna try those gimbals but I ended up getting mambo tbs radio lol so let’s seeee how that goes wit all the mandalooooo
What a bummer, sorry to hear AK. ouch since it was your daily driver. It was probably because you are not a "Gimbal snob" lol, great comment. Love the honesty, never thought AK would make a user error.
Agreed that the standard gimbals are already very good on the Zorro, that radio is such a steal for the money they want for it ! I'd rather spend the price of these metal gimbals on other FPV stuff. Bummer what happened to your zorro, lucky it so affordable to replace though ! ;-)
Anyone using the Jumper AION nano module on their Zorro along with the carrying case? Everything seems to fit, just like the module Albert is using here, but it seems that if I leave the antenna attached it bends the antenna in a way that makes me think it might damage it in the long run. So far I've been just taking the antenna off before storage but that's rather annoying. So I guess which is worse, bent antenna, or using a 45 degree adapter to angle it up a bit?
@@Adam_Carbone yes, it would be great if Albert is able to weigh in since I believe he has this module and its stock antenna, plus a Zorro and the carrying case. If I could I would post a picture to show the issue. Its probably okay, but over the years I have seen many cables fail due to repeated strain on one spot, hence my concerns. Though I guess replacement antennas are cheap enough.
Most likely it won't. I've seen people put these into other radios with a lot of modifications to get it to mount. FYI, like anything, it might be possible with a lot of work.
What a bummer. You have had the worst luck with radios lately. I’ve seen the upgrade videos and I wouldn’t want to do it. Just a little too involved. Can loan you my Zorro til you get it sorted!
8:03 I'm a little confused here. You said that the stock gimbals were "potentiometer", but the specs on the manufacturer's site and all the other reviews and sellers are saying said they were Hall Sensor gimbals. Was this an accidental mis-phrasing or am I missing something? I haven't heard of mostly plastic-made hall sensor gimbals having such poor life expectancy before.
@@Adam_Carbone Guess I missed how the conversation bounced between the different radios and say both looking "complete" and was confused as to which was being referred to.
![☀ Компактная аппаратура под серьезные задачи. [Jumper T20S]](/img/1.gif)
AG01 MINI CNC Hall Gimbals - bit.ly/3KG1BFs
Sticky360 Gimbal Stick Ends - bit.ly/3wi5MDJ
Sticky360 Mini Gimbal Stick Ends - bit.ly/3Ll8lJc
Zorro Carry Case - bit.ly/3MpOBpq
🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks!
💲 If you enjoy my content, please support my channel through these links
Patreon - www.patreon.com/albertkim
Amazon - amzn.to/3zq84zp
RaceDayQuads - bit.ly/RDQ-BF
Pyrodrone - bit.ly/3Bfo3BP
Banggood - bit.ly/3imXlie
Airblade - bit.ly/3ilYVRr
NewBeeDrone - bit.ly/3BhFdPu
Makerfire - bit.ly/2VGI3Kg
Aliexpress - bit.ly/3im17IF
XT-XINTE - bit.ly/3inl7KQ
Insta360 - bit.ly/2VRDNe5
PayPal - paypal.me/marblekit
👉 Old gear for sale here - bit.ly/AlbertGearFS
👉 Follow me on social
🐤 twitter.com/albertkim
📸 instagram.com/marblekit/
I switched to AG01 on my boxer. I am a daily flyer and I was curious. More importantly, AG01 stick ends are plain uncomfortable meat tube grinders. I ended up putting the original Boxer sticks back on the AG01 gimbals. Feel is good now but I am pretty sure it was more a want than a need!
While I’m not in the market for a radio, the fact that they make cool upgrade like this available would definitely steer me in their direction. I hope that they send Albert a replacement Zorro soon!
I had to take mine apart shortly after getting it to deal with a bad two position switch and it turned out the internal JSTs don't fit snugly. You might have a loose connection because the connectors are a hair too loose for the pins they used.
Just ordered these and will come back for install follow along ha
They will fit in the T12/T12 Pro and the T8SG with light modification to the module bay's sides to clear the tensioners.
Will it fit jumper t pro?
I got just a little sand on my TX12. Now the gimbals grinds and sticks a little. I was like, mini gimbals the same cost as the radio, no way. Now I can't wait to order them for replacement.
Even the very experienced can have Uh-Oh moments. Hope you get it sorted out. As always thanks for the honesty in your review.
Hope they send you a new Zorro!
hello, by completion (cutting the loops ar01 mini) is installed on the jumper t-pro, t-pro v2. Installed on jumper light without modifications
Is it failing on stick movement, or switch movement? Radio position? Is a nylon bushing missing and a screw is grounding a PCB?
That’s sucks Albert.
Totally random. Could be anything.
Really hoping the problem is an easy one and turns out to be a simple fix… keep us updated. Thank you for the content!
Yeah. If you find the cause or it happens to others, keep us posted. It's little things like this that can drive someone mad.
Damm bud you got me stressing about changing my AG01 mini gimbals I should be getting them any day now
Just go slowly.
The eyelet that holds the lanyard on the Zorro came off on mine last night while I was changing batteries on a drone. The radio was hanging from my neck and hit the ground right on the arm switch. It still works but this morning I tried to get the screw out that was flopping around inside out. Dude what a nightmare. That radio is seriously crammed full of stuff. I ended up just shaking it out so I didn’t have to take it apart.
Be aware of this problem everyone. I’ve only had mine less then a couple months.
Great reviews as always Albert. Sorry about your Zorro. 😟
Do you think adding some loctite to the eyelet screw would prevent this?
@@saharmesri1810 absolutely, but getting inside the radio deep enough to reach the screw is basically taking it completely apart. After I looked inside, I was like, Hell No! So I emailed Radiomaster and let them know about this issue. My arm switch is super bent but it works. I’m all in on ELRS but this sucked and getting another radio right after I just bought this one was not on my list of priorities. If I ever decide to upgrade the gimbals, I’ll replace the screw and add locktite, and probably the bent up switch as well. I’m bummed though. It’s brand new and I like to keep my things nice.
@@PoodlehawkFPV Yeah, it's sad when a shiny new purchase gets messed up through no fault of your own. Did the eyelet feel loose at all before it fell off? Mine feels pretty tight, it's actually slightly off-center but I haven't attempted to realign because it's on tight and I didn't want to mess with it. Thanks for letting everyone here know about the issue, sounds like for now people shouldn't 100% rely on that screw to hold up and address the issue if they ever need to open up the radio for something else.
@@saharmesri1810 yeah, I hope it doesn’t happen to anyone else. Hopefully Radiomaster will start putting locktite on the next batch. Honestly I didn’t feel anything when it went. It felt snug and my NewBeeDrone lanyard fit perfectly.
I really like the performance of the radio so far, but this sucked for sure.
Great review. I'd be interested in swapping them our for when my DJI FPV radio gives out, but I suspect it won't work. Thanks for the review. Much appreciated. Respect Albert Respect !!!! Still keeping it real!!!!!!
@@Adam_Carbone A open question. Does anybody know if DJI FPV Radio GYMBALS can be replaced? Does anyone have any links to any video of someone who has replaced their DJI FPV gimbals (STICKS)?
Sucks that your Zorro is down, but know you have another video coming on how to troubleshoot a Zorro! 🤣
Nice review thanks
On a side note: I dont know how people fly accurate by using thumbs?????? To me I see it is like writing, tape a pen to you thumb and try to draw a straight line between two parallel lines or even just try to neatly write and then try and use two fingers to draw with a pen, you will be 100 times more accurate and precise. Maybe I am too old school and all you younger lot learnt to use thumbs for everything???
I find thumbs easier to fly because I feel like you have better references. I find pinching uncomfortable while also holding the radio, and if I'm not holding it then my hand doesn't have as good of a reference for where the stick is. With thumbing the way the stick end rolls on the tip of my thumb also helps keep track of what angle the stick is at, hence what position it is in.
On top of that I can move the sticks faster with thumbs, though that may be due to a lack of practice with pinching.
With the Frsky grand lotus stick ends thumbing is perfect for me. I never pinch probably because I grew up playing games with analog sticks that are too wide to pinch. I never have issues with slipping off or being inaccurate ripping tight corners in my dense backyard. Kids these days are thumbin'!!
Yeah I understand you guys can, but I guess it's like hand guns too, I use two hands to shoot accurately, it's a push pull scenario that makes it accurate, same with sticks on a remote controller pinching makes for push pull thats not to say people cant shoot with one hand, I know they can, its just that it is more accurate and repeatable using 2. Like a needle pulling a splinter out of your skin, sure you could do it with your thumb, but its just more precise when using thumb and index finger.
Does this gimbal also work on the jumper t-pro? it is similar to the jumper.
I'm not sure but I don't think it will fit.
@@AlbertKimTV ok thanks
I am a pincher on my TX16S so those stick ends are a must try for me thanks. I'm not a gimbal snob yet lol but I bet the all metal ones feel nice
Bummer about your radio. Is there an option to get it repaired, is it worth paying to repair?
I'm very happy with the full size ag01 gimbals in my Tx16s. Anyone on a budget, they're a luxury not a necessity. I'm waiting on my preferred stick ends. The Frsky Vatac Lotus in black. I'm a hybrid pincher. Happy flying everyone 🤓
They will send me a replacement board. I probably broke something on it.
This is why I love your videos so detailed thanks for the review I wanna try those gimbals but I ended up getting mambo tbs radio lol so let’s seeee how that goes wit all the mandalooooo
Those are sweet! Any idea if the ones for radiomaster T12 will fit in to Jumper T12?
I've heard they don't but I didn't test it myself.
@@AlbertKimTV thank you 🙏
Witch hall gimbals fits to Flysky Nirvana?Thanks
@@Adam_Carbone Great,thanks alot :)
The Flysky Nirvana comes with digital hall gimbals as standard! 🤣
What a bummer, sorry to hear AK. ouch since it was your daily driver. It was probably because you are not a "Gimbal snob" lol, great comment. Love the honesty, never thought AK would make a user error.
I make plenty of user errors. I just don't jump on social media to blame XYZ company for my mistakes like I see all the time from others. LOL.
@@AlbertKimTV It is because you are, The Albert Kim!!! Stay awesome and honest you are the MAN!!!!
Damn, Albert... I'm really sorry. 😕
But I hope you're right and they make a Max version!
Anyway, stay safe there with your family! 🖖😊
Agreed that the standard gimbals are already very good on the Zorro, that radio is such a steal for the money they want for it ! I'd rather spend the price of these metal gimbals on other FPV stuff.
Bummer what happened to your zorro, lucky it so affordable to replace though ! ;-)
If radio master came out with a 18650 version with a smaller screen and upgraded gimbals, I would get one
😎
I want those for my jumper T pro, reckon I could fit them
😁
Did you ever find out what went wrong with the Zorro?
I damaged the mainboard when I opened it up but I don't know where it got damaged. I replaced the mainboard with a new one and all is good now.
Anyone using the Jumper AION nano module on their Zorro along with the carrying case? Everything seems to fit, just like the module Albert is using here, but it seems that if I leave the antenna attached it bends the antenna in a way that makes me think it might damage it in the long run. So far I've been just taking the antenna off before storage but that's rather annoying. So I guess which is worse, bent antenna, or using a 45 degree adapter to angle it up a bit?
@@Adam_Carbone yes, it would be great if Albert is able to weigh in since I believe he has this module and its stock antenna, plus a Zorro and the carrying case. If I could I would post a picture to show the issue. Its probably okay, but over the years I have seen many cables fail due to repeated strain on one spot, hence my concerns. Though I guess replacement antennas are cheap enough.
darn, too bad these gimbals aren't universal but still cool! great info.
Anyone know if these mini ag01’s work with the T Pro?
Most likely it won't. I've seen people put these into other radios with a lot of modifications to get it to mount. FYI, like anything, it might be possible with a lot of work.
What a bummer. You have had the worst luck with radios lately. I’ve seen the upgrade videos and I wouldn’t want to do it. Just a little too involved. Can loan you my Zorro til you get it sorted!
Thanks it's ok, I'm using something else now.
that sucks man, still a great review
Loved better gimbals on my Taranis butter smooth. To each there own. ..... Edit later ..... Well I have done that before. LOL good one anyway.
Albert did you find the problem my friend
They sent me a replacement board and it works now.
8:03 I'm a little confused here. You said that the stock gimbals were "potentiometer", but the specs on the manufacturer's site and all the other reviews and sellers are saying said they were Hall Sensor gimbals. Was this an accidental mis-phrasing or am I missing something? I haven't heard of mostly plastic-made hall sensor gimbals having such poor life expectancy before.
@@Adam_Carbone Guess I missed how the conversation bounced between the different radios and say both looking "complete" and was confused as to which was being referred to.