Only thing I can add is the right stick horizontal connector(roll/aileron) is a bit short and from factory they removed some of the twists to give it a little extra length. If you look here mads is stretched pretty tight but if you remove the twist from the wire it's more then enough. I would also say for anyone interested in deleting the pots(S1/S2) to do it now and you can find the Zorro pot delete stl file on thingiverse that fits great if you print from TPU 100% infill.
Like it, but don't love it cause tooo expensive considering that my radios are not getting old in my hands and therefore are sold too soon to justify such investment. Got the usualFRSky 2019se , X Lite, Jumper T14, RM TX14S , RM T14 MAXX, Jumper t-lite and another one Beta lite in past 5 years and most have gone, all FRsky, Jumper T14, ... But I guess we will See a lot of new Radios coming cause Chip shortage turn around is close after private demand had dramastically decreased - due to prices. Car manufacturers got first notifications that Q3 supplies will increase and without much lag further in Q4. The short sellers are already bleeding due to the shift or stall of private demand which caught them on the wrong foot. I hope they will flood the markets soon with chipd cause then flight Controllers will become far more affordable again.
Nice, it's just what the doctor ordered. My Zorro's AG01 equipped and ready for flight. Thanks for the tutorial.
So why not use a set of colored sharpies to mark the connections? That should make reassembly easier.
The minis are so nice. I put them into my T8SGv3… will never need another radio again. 😁
the small black screw in the package is for remove the spring tension to the throttle, instead of using the long screw coming from the back cover.
Excellent video, Ian! Thanks! 😊
Stay safe there with your family! 🖖😊
Only thing I can add is the right stick horizontal connector(roll/aileron) is a bit short and from factory they removed some of the twists to give it a little extra length. If you look here mads is stretched pretty tight but if you remove the twist from the wire it's more then enough. I would also say for anyone interested in deleting the pots(S1/S2) to do it now and you can find the Zorro pot delete stl file on thingiverse that fits great if you print from TPU 100% infill.
Thank you so much for this video!
Thanks.
Make sure you don't pinch the battery wires in the standoff when closing it back up I burnt the piss out of my finger with a spicy battery spring
Like it, but don't love it cause tooo expensive considering that my radios are not getting old in my hands and therefore are sold too soon to justify such investment.
Got the usualFRSky 2019se , X Lite, Jumper T14, RM TX14S , RM T14 MAXX, Jumper t-lite and another one Beta lite in past 5 years and most have gone, all FRsky, Jumper T14, ...
But I guess we will See a lot of new Radios coming cause Chip shortage turn around is close after private demand had dramastically decreased - due to prices.
Car manufacturers got first notifications that Q3 supplies will increase and without much lag further in Q4. The short sellers are already bleeding due to the shift or stall of private demand which caught them on the wrong foot.
I hope they will flood the markets soon with chipd cause then flight Controllers will become far more affordable again.