I've been flying the Radiomaster Zorro 4in1 with Elrs Nano for about half a year now and one of my biggest headaches when getting started with it was unclear Zorro tutorials about the gimbal tensions. Luckily, my dad and I were able to get the stick tension to a point where I could be comfortable flying. Now my flights will be even better with perfectly tailored Zorro gimbals to suit my style. I've been diving into all of the older Rotor Riot videos and I love what you guys do! This is by far the best tutorial for the Zorro I have seen and I won't need to be looking any further. Thank you Shawn, for all that you do to make fpv more accessable and easier to understand for those just getting started!
Hello,I put some Machine oil to my zorro right hand gimbal because it's not smooth at all but unexpectedly I was put about 5ml(millieters) on the gimbal right side and swiped it with a clothes,I think there's about 2ml(militers) goes through the gimbal to inside of the transmitter.Hence will it occur to short circuit on Zorro? Please reply as early as possible.
I would have liked to seen How to configure the controls to mode 1 on the left thumb. To use YAW & PITCH on left & The Rest on Right. Or Other options if possible I don’t know about? I was SO CLOSE to finding Mode 1 instructions! Ughhh! Good stuff though!
Hey! So I have you in front of approx. Ordered 1.5 weeks. Can't I put two ADDITIONAL 18350 batteries (because of the small size) in a printed case, solder a 2-pin USB cable on it, then feed the internal batteries from it until the external ones are empty, so that the internal batteries can continue to be used? 🤔 Or is the 7.4V (8.4V) voltage too high for the USB port?
I get doing this, but if I’m buying.. it’s not for me but a present..? I have to buy these other tools and such & utilize my busy brain. Is there an alternative for presents ?
I've been flying the Radiomaster Zorro 4in1 with Elrs Nano for about half a year now and one of my biggest headaches when getting started with it was unclear Zorro tutorials about the gimbal tensions. Luckily, my dad and I were able to get the stick tension to a point where I could be comfortable flying. Now my flights will be even better with perfectly tailored Zorro gimbals to suit my style. I've been diving into all of the older Rotor Riot videos and I love what you guys do! This is by far the best tutorial for the Zorro I have seen and I won't need to be looking any further. Thank you Shawn, for all that you do to make fpv more accessable and easier to understand for those just getting started!
what are your preferred gimbal settings?
Good sheeet bratha.
Hello,I put some Machine oil to my zorro right hand gimbal because it's not smooth at all but unexpectedly I was put about 5ml(millieters) on the gimbal right side and swiped it with a clothes,I think there's about 2ml(militers) goes through the gimbal to inside of the transmitter.Hence will it occur to short circuit on Zorro? Please reply as early as possible.
I would have liked to seen How to configure the controls to mode 1 on the left thumb. To use YAW & PITCH on left & The Rest on Right. Or Other options if possible I don’t know about? I was SO CLOSE to finding Mode 1 instructions! Ughhh! Good stuff though!
Hey!
So I have you in front of approx. Ordered 1.5 weeks.
Can't I put two ADDITIONAL 18350 batteries (because of the small size) in a printed case, solder a 2-pin USB cable on it, then feed the internal batteries from it until the external ones are empty, so that the internal batteries can continue to be used? 🤔
Or is the 7.4V (8.4V) voltage too high for the USB port?
The zorro has a 3 pin port on the bottom and strap slots for an external 2s battery.
It would be helpful to buy a Mode 1 Pre-Set.
Zorro or Even Better for X-Mas presents.. Pockets
I get doing this, but if I’m buying.. it’s not for me but a present..? I have to buy these other tools and such & utilize my busy brain. Is there an alternative for presents ?
Can zorro 4 in 1 bind with flysky ?
yes!
Yes it can, it will bind with most all RXs
@@DanielCValot okay 👍