Hey! That 4Runner looks familiar! Thank you again for the awesome build, Brian! I'm really happy with the way it turned out and I have received a ton of compliments on it. Awesome work as always!
@@MaxSualkin Yes but I'll probably end up using it more as a food prep surface and use a separate table for the stove due to the propane canister needing a place to sit.
I've been checking out lots of drawers systems for DIY purposes. After a year of watching videos, I can easily tell that you're designs are the best. Thank you for sharing.
That drawer slide support for the piano hinged cooking surface is very smart! I went over that exact problem in my brain hundreds of times when building my setup and I wish I came up with that idea. Great job!
I like your work really nice. I build stuff on the weekend here San Gabriel Valley for fun. One thing my wife grandpa who was a cabinet make showed me that really finishes of the cabinets use the router to bullnose/round over all the sharp edges/corners that little touch will really impresses the customers when they bump against them, they will thank you later.
I started making this same type of build for my 4Runner. When I started work on it, I considered the ramifications if someone rear-ended me/my family in it. With so many distracted drivers today that’s a very real possibility. Even a moderate rear-ending could catapult that rigid structure into the backs of the front seat occupants. This may cause death or paralyzing. I couldn’t live with that risk myself. So, I modified my design to be collapsible in the event of a rear-ending accident by 2-3 feet. I’m surprised so many builds do not plan around this potential. Has no one else designed a collapsible version? Maybe I should make a video on my design that I’m building now.
Great work looks good, how about bolting the stove upside down to table than when you open the lid the stove comes with it an no more fiddling to get stove out?
This guy seems like a pretty cool guy, seems honest too. I wonder if he has any ideas for other suvs other than Toyota? I have a 2002 Mercedes ml500 suv and I already pulled the back seats. Its just a different area to work with because it steps down on the frame. So if you get a chance to look a one of suvs and have some ideas please let me know.
How do you secure the platforms/drawers down? Trying to start a build soon and it’d be great if you maybe show how you go about securing/where depending on the vehicle.
Hey Brian how are you this is Fernando from Los Angeles California I just like to say I love you show you give me a Lotta good ideas I am building my my truck a lot of spaces for my tools I do construction and believe me I relate to this so simple and nice on all the the the furniture’s just congratulations man keep doing that thank you
Thanks for this Awesome video content. I have 4Runner I'm looking into adding almost the same setup but not that intricate as what you have built for this 4Runner.👊😎👍
How did you bolt the sleeping platform section to the 4runner? I don’t see any exposed bolt heads and it doesn’t go over the factory bolt holes for the rear seat
Well done. I like it, a lot. I may do something similar in my land cruiser. Could you put the drawers all the way forward to the front seats? I have that same stove. I think I would mount the stove permanently to a slide out shelf pretty much where you have it but a bit lower with room for a small bottle of propane. And maybe permanently fix the lid over the stove as another horizontal area close to the action.
Have you ever done something to a Toyota Sequoia? Like I would love to add solar & LED & just about this same set up done to mine with a added camp kitchen to the back & Awning to the side..🤔..This would be amazing 👏
Very inspiring your chanel! I d like to know about where and why to place that „coffee-mechanic“ exactly? i def will work with that in my van too. thx for sharing knowledge and concepts! stay well and happy thou.
That is such a good idea and the workmanship is so good. I think I’ll build one for the back of my CRV Just the size of my back area. It would save so much room for my work tools. Now mine will not look anything like that I most certainly do not have the skills to do it like this.
Hi again buddy, could you please tell us what kind of paint you use on the wood because all the paint has smell specially inside the car and it’s always close . Thanks buddy
I commented on another video of yours and continuing on this one. See like in this video, you have one locking slide on the left and none locking on the right of each drawer.
I love this!! Your work is very neat too. Any chance I can work with you and learn more woodworking skills while at it??? I want to do a build in my '17 Suburban. Have you done anything like this for a newer Suburban? I built a temp deck/bed for my last 2004 Suburban but now realizing I need to do more modifications to this newer rig before I can even start on a build.
You can find them for sale on my website here: solid-wood-worx.myshopify.com/collections/hardware/products/60-locking-drawer-slides?variant=32031026872375
Hi Brian, been watching your vids and you do really nice work. Would you show how exactly you build a drawer? Specifically, like how do you connect the sides together and to the bottom. Your drawers look super tight and was just wondering about your technique. Have a great day!
Thanks for the interest. Unfortunately I dont do any custom builds like this anymore. But on my website you can find my basic drawer systems for sale. www.solidwoodworx.com
Hello just an idea for what it’s worth . A split say 2rd/1rd to accomodate a similar bedding would afford use of thèse drawers on rainy or stealth mode. That would make it just perfect ! Would very mu hui l’île to see
The locking slides have little pulls on them, and in both drawers there was something in the way. I allowed room for if the customer ever wanted to put handles that stuck out the front in the future.
I really like your design, and the quality looks good too! How do you attach the drawer slides to the drawers and cabinet sides? It looks like some sort of thru bolt??
can the stove top hold the weight when pots etc are added? does the platform for the bed flip at any of the sections to make the under bed storage more accessible?
Fellow wood worker here. I really appreciate the craftsmanship. Wishing you as much success as you can handle.
Hey! That 4Runner looks familiar! Thank you again for the awesome build, Brian! I'm really happy with the way it turned out and I have received a ton of compliments on it. Awesome work as always!
Is the stove platform sturdy enough with two pots full of things on it?
@@MaxSualkin Yes but I'll probably end up using it more as a food prep surface and use a separate table for the stove due to the propane canister needing a place to sit.
What did a build like that cost?
Nice work. How much was this build?
gerard five please tell price !
I've been checking out lots of drawers systems for DIY purposes. After a year of watching videos, I can easily tell that you're designs are the best. Thank you for sharing.
That drawer slide support for the piano hinged cooking surface is very smart! I went over that exact problem in my brain hundreds of times when building my setup and I wish I came up with that idea. Great job!
Man I’ve been pondering if I can replace my 1/2 ton short box with a gen4 4Runner to fit my cabinet installer tool kit.
This is encouraging.
My head is bursting with ideas after watching this 💡 the removable dividers are such a good idea!
That stove flip up is awesome. Great idea for that thin pullout support.
You're ALWAYS a ⭐ STAR when it comes to BUILDING SOMETHING'S !!! THANKS 👍 👌 !!!
I keep coming back to this build because it’s perfect! Rad design man
Bryan just installed his standard system in my gen 4 and I love it. Thanks dude!!!
I like your work really nice. I build stuff on the weekend here San Gabriel Valley for fun. One thing my wife grandpa who was a cabinet make showed me that really finishes of the cabinets use the router to bullnose/round over all the sharp edges/corners that little touch will really impresses the customers when they bump against them, they will thank you later.
One of the best work space - making ideas ive seen.
Love watching these videos
Builds keep getting better and better
I started making this same type of build for my 4Runner. When I started work on it, I considered the ramifications if someone rear-ended me/my family in it. With so many distracted drivers today that’s a very real possibility. Even a moderate rear-ending could catapult that rigid structure into the backs of the front seat occupants. This may cause death or paralyzing. I couldn’t live with that risk myself. So, I modified my design to be collapsible in the event of a rear-ending accident by 2-3 feet. I’m surprised so many builds do not plan around this potential. Has no one else designed a collapsible version? Maybe I should make a video on my design that I’m building now.
LOL PUT A FUCKING STEEL BUMPER ON IT
Great work looks good, how about bolting the stove upside down to table than when you open the lid the stove comes with it an no more fiddling to get stove out?
Could work ya
Top 👍👍👍👍👍the 3 and the 4 better. I appreciate the bigger Space underneath particularly by the back passenger door
Why would anyone give thumbs down.. that’s freaking awesome 👏
I definitely want to do this when I get my 4runner!!!
That’s a really good idea for the stove 👍🏻 good work
Idea overload... true craftsman! Cheers mate!!
I REALLY REALLY need this in my life! Please don't forget about me when you are back to doing custom installs again! please!
I LOVE the pop up table cover for the drawers. And removable dividers ! 🎯 Brilliant.
Nice and modular, great use of space!
This guy seems like a pretty cool guy, seems honest too. I wonder if he has any ideas for other suvs other than Toyota? I have a 2002 Mercedes ml500 suv and I already pulled the back seats. Its just a different area to work with because it steps down on the frame. So if you get a chance to look a one of suvs and have some ideas please let me know.
very good. you are getting better and better. most practical design.
How do you secure the platforms/drawers down? Trying to start a build soon and it’d be great if you maybe show how you go about securing/where depending on the vehicle.
You did a great job, nice setup. The 4 Runner is next on my list , I’ll hit you up lol .
Hey Brian how are you this is Fernando from Los Angeles California I just like to say I love you show you give me a Lotta good ideas I am building my my truck a lot of spaces for my tools I do construction and believe me I relate to this so simple and nice on all the the the furniture’s just congratulations man keep doing that thank you
my favorite so far. good stuff
Any chance you could do a how to video on how to install those coffee table hinges
I can try yes
Thanks for this Awesome video content. I have 4Runner I'm looking into adding almost the same setup but not that intricate as what you have built for this 4Runner.👊😎👍
Wood you be able to pull a drawer and show how its mounted to the floor?
I dont have this vehicle anymore but you can watch this video on how my dual drawer system gets mounted. ruclips.net/video/RsRciyGJcUk/видео.html
Well done. I am in the process of designing one just like this for my fj cruiser
Love the table top/extra platform. Details and movable slats on point
How in the world do you install those coffee table hinges
Beautiful job! Are you able to build one with half of the seats removed and the remaining ones in place?
I have never done that.
How did you bolt the sleeping platform section to the 4runner? I don’t see any exposed bolt heads and it doesn’t go over the factory bolt holes for the rear seat
We have a seat delete for sale on our website
Can you do one for a 2009-2013 Subaru Forester please and thank you !?!?! I’ll buy a blueprint too !!! Pretty please ! Love your builds !!
Well done. I like it, a lot. I may do something similar in my land cruiser. Could you put the drawers all the way forward to the front seats? I have that same stove. I think I would mount the stove permanently to a slide out shelf pretty much where you have it but a bit lower with room for a small bottle of propane. And maybe permanently fix the lid over the stove as another horizontal area close to the action.
Yes you could do longer drawers, would just need to support them in a way more towards the front area.
Have you ever done something to a Toyota Sequoia? Like I would love to add solar & LED & just about this same set up done to mine with a added camp kitchen to the back & Awning to the side..🤔..This would be amazing 👏
I have built a drawer system but never electrical before.
More modular magic you've performed. Nice! Stay safe & well.
Your design is the best
👍🙏🙏
Wow awesome. I just stumbled onto this and I happen to be in Huntington Beach!
Bro, you are sick with wood!!!
So minimalist setup and two great ideas I never saw before! 👍
Beautiful work!! I the custom ideas that you have. Totally what I've been looking for. Awesome!!!
the table for the stove is a great ideea! well done
nice design and building. thank you for sharing.
Sorry , would very much like to see if it works. Thanks for the post
Very inspiring your chanel! I d like to know about where and why to place that „coffee-mechanic“ exactly? i def will work with that in my van too. thx for sharing knowledge and concepts! stay well and happy thou.
Sorry but i dont have any dimensions for that unfortunately.
Wow! nice clever build!
How much does this cost just an estimate if you just want it to stop behind the back seat? Neat work 👍🏾
That is such a good idea and the workmanship is so good. I think I’ll build one for the back of my CRV Just the size of my back area. It would save so much room for my work tools. Now mine will not look anything like that I most certainly do not have the skills to do it like this.
Hi again buddy, could you please tell us what kind of paint you use on the wood because all the paint has smell specially inside the car and it’s always close . Thanks buddy
No paint was used. Just a polyurethane clear coat.
@@SolidWoodWorx Thank you so much again 🙏🙏
He I like it 👍 , how much is 2021 4Runner ?
Can find more info on Solidwoodworx.com
Ok thank you.
I commented on another video of yours and continuing on this one. See like in this video, you have one locking slide on the left and none locking on the right of each drawer.
I replied to your comment
Nice job bro. I'm planning to make one for my Honda Oddessy
Very nice work. Are you ever going to make videos of the process?
Hopefully
Man that’s quality and tidy work
So good. What kind of plywood do you use?
Luan
I love this!! Your work is very neat too. Any chance I can work with you and learn more woodworking skills while at it??? I want to do a build in my '17 Suburban. Have you done anything like this for a newer Suburban? I built a temp deck/bed for my last 2004 Suburban but now realizing I need to do more modifications to this newer rig before I can even start on a build.
Awesome set up. I would love something similar for my 17 Honda Pilot.
You're the best ... hands down.
What kind of wood are you using I like the look of it thanks
Luan
So sick dude!!
I really like this ? bro what’s the price for this one I’m interested I live in San Francisco ca ?
You can find all information on our website www.solidwoodworx.com
Genius! Very special build!
an effective solution for the 4runner, cheerio
This was amazing! Also love the window organisers, would love to know what brand they are?
Also might want to add drop down adjustable support legs once the rear drawers are pulled out
The slides can hold up to 500lbs and are bolted to the vehicle
Been catching up with your builds. Really cool and ingenious ideas! Are you able to share where you source your drawer slides from?
You can find them for sale on my website here:
solid-wood-worx.myshopify.com/collections/hardware/products/60-locking-drawer-slides?variant=32031026872375
Beautifully done!
Great work.
This is a cool set up... I'm looking for this set up for my 3rd gen 1998 4RNR. How long does this take for you to do and install? And 💰💲😎
Please email me for more info solidwoodworx@gmail.com
Nice job! Could you build that for others (customers)? I have 4Runner 4th generation
Yes
Is the stove table stable? Seems it might not hold with water in a pan?
Real nice work.
good job
Is there a clip for how to implement it
how much weight can that coffee table hinge hold? thanks
The drawer slides can hold around 200. As for the table hinge im not sure to be honest. It was designed to have food or things your prepping up there.
Very nice job.
Hi Brian, been watching your vids and you do really nice work. Would you show how exactly you build a drawer? Specifically, like how do you connect the sides together and to the bottom. Your drawers look super tight and was just wondering about your technique. Have a great day!
Where can I find the system you used for the pop out table or the name of that system?
Coffee Table Hinge: amzn.to/2ZDwDZk
@@SolidWoodWorx thank you
good custom car for camping.
How much does a set up like that cost?
Thanks for the interest. Unfortunately I dont do any custom builds like this anymore. But on my website you can find my basic drawer systems for sale. www.solidwoodworx.com
Hello just an idea for what it’s worth . A split say 2rd/1rd to accomodate a similar bedding would afford use of thèse drawers on rainy or stealth mode. That would make it just perfect ! Would very mu hui l’île to see
Im sorry but that was hard to understand
What type of wood do you use? Cheers from Colombia south America
Luan its a lite weight ply
Amazing work as always! Nice job!
awesome work, did you use 18mm ply?
Yes .75”
Cool, need this to. Can i buy the template?
Not as an elaborate template
Ok your builds are amazing! I def want to do something like this to my equinox
Great work again and again 👏
Nice build as always. Was there a reason you didn’t do hand holes for drawer pulls?
The locking slides have little pulls on them, and in both drawers there was something in the way. I allowed room for if the customer ever wanted to put handles that stuck out the front in the future.
I really like your design, and the quality looks good too! How do you attach the drawer slides to the drawers and cabinet sides? It looks like some sort of thru bolt??
Yes a furniture bolt or sex bolt.they call it
love the build, did you use a non locking drawer slide on the right side of both drawers? awesome work!
Ya thats all i could get to my supplier at the moment.
Best one yet!
Looks great 👍 you do brilliant work 😎
can the stove top hold the weight when pots etc are added? does the platform for the bed flip at any of the sections to make the under bed storage more accessible?
No flipping in the bed area. Yes platform can hold the pots
Hey what are those cargo net things over the rear windows and where can you get some?
They're modular storage panels from Rago Fabrication.
www.ragofabrication.com/collections/5th-gen-4runner/products/5th-gen-toyota-4runner-modular-storage-panel-system-powder-coated-1
I wonder how much extra weight is added to the car with just the drawer system.
150lbs or so
Beautiful work buddy.
This is really neat. Would you build something similar for my OB?