Some nice work simple ideas I have a second gen I am building that 3 kids and one adult will be camping out of so I like the simple things I won't be sleeping in my rig so I plan to do more storage in the back but I like this idea to work off of
This guy job is so avaiation quality.. i wish u have kit for specific car sizes that we can order it..something we can assemble it..i luv this set up for honda pilot😍✌️
I love this build! Only thing that would be different is my driver side 2nd row would stay up cause I would use it for my work station. I'm so ready to build I just need to find space.
Once again, you've given me a FABULOUS idea! I too, wanted a space for a drop in sink for dishes. Do you think it would work if we did a similar drawer system BUT modify the sink section on OTHER end of the drawer? For example: Pull out the left drawer like you have it, but the sink portion would come out from the FRONT of the drawer and mounted UNDERNEATH. You wouldn't need the sides of the sink portion in that case, just a flat piece with a hole in the middle.. Would that work? *ponder*
Amazing quality build. I’ve been searching for this info online before buying a 4th gen 4runner and haven’t been able to find it yet: what is the height (headroom) of the cargo area?? How uncomfortable is it to sleep on a platform like this with a ~4” mattress? Can you sit up with it or will you bang your head? Just thought I’d ask here since yours seems to be on the shorter end of all the bed platform builds I’ve seen. Thanks!
Hey Brian I've been watching your wood worx you tube videos and really enjoy the ideas and craftsmenship. I also just was watching a bunch of overlanding videos and you came up on your mission to Panama! Frickin killer. Anyway I'm planning a road trip from my home in Steamboat Colorado thru Utah, Arizona down to Cali then Baja end of February to beginning of April. I'm currently putting my truck bed design together and starting my build this weekend! I'm an experienced Carpenter for over 20 years. ( need any help this winter??) be in California end of December into January to finish prep for baja Any advice? Last time I drove down the tip was1996. Anyway thanks for the stoke maybe I'll come check out your shop while in California
I’m wondering how much weight these will support when fully extended? And how you anchor the inside cabinet so it doesn’t tip up? Very nice, professionally done work. 😎
Have you had any customers do a single side drawer? I'm 6'4" and like the ability to sit upright on my bed area, but can't with a platform. Considering doing the left side only of this build with the extra pullout counter space. Issue I'm running into is mounting it.
Any way you could make the under storage one big space without a center divider if you used metal crossbars to hold the sleeping platform and keep it from bending under weight? I've been toying with the idea for my 4Runner. No drawers. Just one big open space underneath.
Hi mate, how do you do to support the weight of the drawers (and whatever is in them) when opened? Is the build drilled to the car...? or is the weight of the sleeping platform enough to outweight the drawers? Thanks, love your builds they're great inspiration.
The 4runner seems a very good choice for an suv you can convert like this. I'm curious does someone know if there's enough place to fit a cooler if you remove the back seats? or if you can only remove only one of the seat for that purpose? I didn't find anybody who tried it on youtube.
@@SolidWoodWorx great! I just went and checked the build you posted july 2020, it seems like there is enough place to fit a tiny cooler. Thanks for posting your videos, it's very inspiring and it gives a lot of great ideas.
I'd like a step by step guide or like atleast dimension or something so I can mimick this I plan to buy those locking slides 36 I really dig this help me out
Hey Corey, I sell plans on my website for a basic system like this that can be altered. At least it would give you somewhere to start. www.SolidWoodWorx.com
In the diy plans i sell there is a list at the end of what the amount of o wood needed to cut the system out. For this double drawer i do not have any sort of diy plans or material list.
Great setup! Can you give info on where to find the drawer slide pairs that only have the lock lever on the one (left handed) side like you have in this build? Loooking for some 42-48” heavy duty lock-in/lock-outs. Thanks!
I have a 2001 Dodge Durango SLT on which i'd like this exact set up. I am in Florida and would like to know if this is something you would be able to build out of given measurements and then ship over to me.
I would love to build out my truck bed along side you so I may learn some of the process and techniques. Is that something that you might be interested in?
8/7/2020 I like this one a lot. A hide box would be nice. Lift out the sink, have a drop door with a barrel key lock on the blind space under counter for valuables under counter around the sink. I have been thinking about safe storage of valuables while traveling. Paper like insurance, titles, deeds, warranties, personal Ids, personal med records and just plain gold. A lot of info copies can be on thumb drives but a passport and a 9mm and a good map would be my choice to add. Don
You do not need the hide box in the sink drawer. Place the box at the end of the first slide out drawer just large enough for a glove box . It might shorten the storage sq in in the first slide out but would be stealth and slide back under the bed. Could be accessible from rear seat but I would not for max security. Don Note thanks for the videos. Truly cool and good workmanship. @@SolidWoodWorx
I just started watching... its awesome what you do. I'm finally getting my 1998 4runner ready for some camping. Do you have a price guide for your builds?
@@SolidWoodWorx sorry to bug again... what the cost to build the classic bed and drawer system for a 3rd gen 1998 4runner. Like the one shown on April 24th, on your channel. Thanks.
That's awsome man. I need one built for a 3rd gen. My idea is alot different then normal. I need a lockable gun case and meat cleaning station. You can see my 4runner on my page. I'll send an email in the next week if your interested?
Some nice work simple ideas I have a second gen I am building that 3 kids and one adult will be camping out of so I like the simple things I won't be sleeping in my rig so I plan to do more storage in the back but I like this idea to work off of
Very creative! Love the extra counter space and the ease of flipping up the bed.
Very clever build. Someday I may have a conversion done and I hope you’re still doing them. Love your channel.
Good use of this small area - the wheel wells take up . I am collecting ideas... Good Job !
This guy job is so avaiation quality.. i wish u have kit for specific car sizes that we can order it..something we can assemble it..i luv this set up for honda pilot😍✌️
Very nice double drawers design! Thanks for sharing!
Great build. Love the sink idea
Brian, I so look forward to these videos. Thanks for sharing.
Such a sick build man
Excellent I love the nested left drawer very cool nice job
Love that custom! This can fit in my Mitsubishi Outlander. Great job!! 👍🏼
Very clever bed idea!
always so very neatly high quality made
I love this build! Only thing that would be different is my driver side 2nd row would stay up cause I would use it for my work station. I'm so ready to build I just need to find space.
You can remove the bed piece and fold the back seats up again would take less than 5 minutes
Once again, you've given me a FABULOUS idea! I too, wanted a space for a drop in sink for dishes. Do you think it would work if we did a similar drawer system BUT modify the sink section on OTHER end of the drawer? For example: Pull out the left drawer like you have it, but the sink portion would come out from the FRONT of the drawer and mounted UNDERNEATH. You wouldn't need the sides of the sink portion in that case, just a flat piece with a hole in the middle.. Would that work? *ponder*
Would you consider building some drawers for a 2004 suburban?
That's so awesome a drawer system / bed system I love it
You are awesome....so creative. Great job!
Man, I love it. Nice work. And the fit and finish looks really well done.
Very nice! How much did that system weigh?
Was looking for plans for this particular build. Did not see. Interested lmk total plans.
Not drawn up yet sorry
@@SolidWoodWorx any chances for the plans for normal drawer system but with foldable bed? Can't see on the website!
Nice work, Looks awesome!.
How much weight can the extra pullout support?
AWESOMENESS...Straight Up
You do awesome work! It would be cool if you would share a video of the actual build process. Have you ever done any RV remodeling?
No RV remodeling.
Some very nice ww skills.
Stellar work !!
Awesome build!
Did you ever draw up plans for this system
Negative, over time i could see it was a bit to much length and would not work to well over time.
how high is the platform ? I really like the design but worried about losing head space with this
8.5" Tall
You do a good job 👏 my friend !
Great work love all your builds!!!!!!😊
Awesome work! Would love this for my Honda Pilot
So clean and simple. Wish you could help me out by doing your thing in my land rover 110 3 door.
Amazing quality build. I’ve been searching for this info online before buying a 4th gen 4runner and haven’t been able to find it yet: what is the height (headroom) of the cargo area?? How uncomfortable is it to sleep on a platform like this with a ~4” mattress? Can you sit up with it or will you bang your head? Just thought I’d ask here since yours seems to be on the shorter end of all the bed platform builds I’ve seen. Thanks!
8.5” tall
Another great job 👍.
Hey would you consider selling plans for this? Thanks
I do not have plans for this sorry
this is a great setup! Id like to do the same thing without the bed portion! Do you have measurements?😂
where is your website for the plans--great job you did!
Www.solidwoodworx.com
@@SolidWoodWorx Thank you-- I'm reviewing a wealth of information on your site. Thank you; especially for the videos
what kind of wood do you use for the boxes?
I have been using a plywood called luan, it’s lightweight and strong.
I have a 4th gen but second row seats are setup different. They won't sit flat
We have plans on our website for that
Love this build... do you sell the plans with the double drawer extension ??
I dont sorry
Very nice
Do you have sell plans or kits for your Designes
Www.solidwoodworx.com
Didn’t see these plans on your site. Do you have the link.
No plans for this setup yet.
@@SolidWoodWorx when will you have the plan ready?
Hey Brian I've been watching your wood worx you tube videos and really enjoy the ideas and craftsmenship. I also just was watching a bunch of overlanding videos and you came up on your mission to Panama! Frickin killer. Anyway I'm planning a road trip from my home in Steamboat Colorado thru Utah, Arizona down to Cali then Baja end of February to beginning of April. I'm currently putting my truck bed design together and starting my build this weekend! I'm an experienced Carpenter for over 20 years. ( need any help this winter??) be in California end of December into January to finish prep for baja
Any advice? Last time I drove down the tip was1996. Anyway thanks for the stoke maybe I'll come check out your shop while in California
I do not need any help at the moment. Ya nice sounds like a fun trip, dont have to much advice for baja just bring enough supplies and decent spanish.
I’m wondering how much weight these will support when fully extended? And how you anchor the inside cabinet so it doesn’t tip up? Very nice, professionally done work. 😎
L brackets on back of drawers.
Have you had any customers do a single side drawer? I'm 6'4" and like the ability to sit upright on my bed area, but can't with a platform. Considering doing the left side only of this build with the extra pullout counter space. Issue I'm running into is mounting it.
I have not
Great Work! What is the plywood thickness ? Thanks
Mixture of 3/4” and 1/2”
Can you still use the rear seat?.
Of course
Thank you for your swift response.
Any way you could make the under storage one big space without a center divider if you used metal crossbars to hold the sleeping platform and keep it from bending under weight? I've been toying with the idea for my 4Runner. No drawers. Just one big open space underneath.
Im sure its possible ya
Stressed Skin Panels/ Torsion Box might be your best bet. If you're not familiar, think hollow core wood door.
Hi mate, how do you do to support the weight of the drawers (and whatever is in them) when opened? Is the build drilled to the car...? or is the weight of the sleeping platform enough to outweight the drawers? Thanks, love your builds they're great inspiration.
There are L brackets behind the 2nd row seats that hold it from tipping at all.
Great job, thanks.
The 4runner seems a very good choice for an suv you can convert like this. I'm curious does someone know if there's enough place to fit a cooler if you remove the back seats? or if you can only remove only one of the seat for that purpose? I didn't find anybody who tried it on youtube.
There are many builds ive done for people who have removed the 2nd rows seats.
@@SolidWoodWorx great! I just went and checked the build you posted july 2020, it seems like there is enough place to fit a tiny cooler. Thanks for posting your videos, it's very inspiring and it gives a lot of great ideas.
awesome work. What thickness plywood are you using for the structure and the drawers? 3/8?
3/4" for everything, then 1/2" for the drawer and box bottom.
I'd like a step by step guide or like atleast dimension or something so I can mimick this I plan to buy those locking slides 36 I really dig this help me out
Hey Corey, I sell plans on my website for a basic system like this that can be altered. At least it would give you somewhere to start. www.SolidWoodWorx.com
Do you have list for all the materials?
In the diy plans i sell there is a list at the end of what the amount of o wood needed to cut the system out. For this double drawer i do not have any sort of diy plans or material list.
What type of wood do you usually use? I've heard Baltic birch is ideal?
Luan is light in these builds
Great setup! Can you give info on where to find the drawer slide pairs that only have the lock lever on the one (left handed) side like you have in this build? Loooking for some 42-48” heavy duty lock-in/lock-outs. Thanks!
On my website www.solidwoodworx.com you can order slides and choose which side you want locking!
I have a 2001 Dodge Durango SLT on which i'd like this exact set up.
I am in Florida and would like to know if this is something you would be able to build out of given measurements and then ship over to me.
I do not do anything like that sorry!
very nice, like the fold bed platform option. could this size down to my Xterra?
Have not built this in an xterra yet but im sure it could be done!
Love the build! How much weight can the LH side drawer support when double extended like that?
Id imagine at least half the 500lb rating
You do excellent work. I wonder if there's a market for this sort of thing on the East Coast (NC area)?
There definitely is i get inquiries all the time.
How far is the waiting list for a van conversion?
Not taking on anymore work at the moment
I would love to build out my truck bed along side you so I may learn some of the process and techniques. Is that something that you might be interested in?
I cannot do that sorry
Nice build! Do you ever use baltic birch plywood for your builds?
sometimes yes, but in smaller cars i use Luan which is much lighter and still very strong!
@@SolidWoodWorx Awesome. Thanks for the tip!
8/7/2020 I like this one a lot. A hide box would be nice. Lift out the sink, have a drop door with a barrel key lock on the blind space under counter for valuables under counter around the sink. I have been thinking about safe storage of valuables while traveling. Paper like insurance, titles, deeds, warranties, personal Ids, personal med records and just plain gold. A lot of info copies can be on thumb drives but a passport and a 9mm and a good map would be my choice to add. Don
Wouldnt be possible since the other drawer slides in there.
You do not need the hide box in the sink drawer. Place the box at the end of the first slide out drawer just large enough for a glove box . It might shorten the storage sq in in the first slide out but would be stealth and slide back under the bed. Could be accessible from rear seat but I would not for max security. Don Note thanks for the videos. Truly cool and good workmanship. @@SolidWoodWorx
Nice!
Nice set up! If you don’t mind me asking, how much would this cost?
Please email solidwoodworx@gmail.com for any build inquiries
Where are you located?? Do you sell the plans or ship?
Dont have plans for this exact model yet but i do for the basic model, and can ship some models that are under weight.
excelente!!!
Do you use a cad program to design? Like sketchup?
Just started playing with sketchup but before that no.
Do you sell your plans? Would love to build this out for my 4Runner!
I sell plans on www.solidwoodworx.com i do not have this pan up for sale yet!
@@SolidWoodWorx when are these plans hitting the website?
Are you going to add this to your plans that can be purchased?
Going to try and draw them up next month yes
How much for one
please email solidwoodworx@gmail.com
I just started watching... its awesome what you do. I'm finally getting my 1998 4runner ready for some camping. Do you have a price guide for your builds?
Just email for a quote
@@SolidWoodWorx sorry to bug again... what the cost to build the classic bed and drawer system for a 3rd gen 1998 4runner. Like the one shown on April 24th, on your channel. Thanks.
Email solidwoodworx@gmail.com thank you
Love this build! What brand drawer slides are those?
I sell them on my website link in the description!
Solid Wood Worx awesome, thanks! I’ll have a look.
Love this stuff. Wish I could work with you
Could you email me the plans for this build?
Check our website
How much ?
Email solidwoodworx@gmail.com for any build inquiries. THanks
Incredible! When mounting it to the 4Runner, do you recommend putting any protection underneath the drawer system?
I never have usually there is carpet in the 4runner
Can you do a 2001 Crv build?!?
Please email for build inquiries
@@SolidWoodWorx what’s your email?!?
🔥
That's awsome man. I need one built for a 3rd gen. My idea is alot different then normal. I need a lockable gun case and meat cleaning station. You can see my 4runner on my page. I'll send an email in the next week if your interested?
Surgeon (3rd.Gen)
Красавчег, окуительно смастрячел!
Dude I have a 4th Gen...how much$$
Email solidwoodworx@gmail.com for build inquiries. thanks
Good job! Thank you