Sweet! The Bowtech risers are wider than the norm. I needed to angle my Podium Gen 2 offset bar, due to not being able to mount it level. Will Gen 4 have the built-in 8 or 10* drop angle for the stabilizer?
I like this as I did this in the late 90's to early 2000's on a Clearwater bow as I fought to keep it level with or without a quiver. In those days I took an old overdraw apart to do it. I have have been looking at doing this again as I do not believe I need a side bar for hunting. I'm now afraid at what the shipping would be to Canada. Thanks for the content
The day my gen 2 comes in you release this!! lol. I’m running the gen 2 with a 10 degree down mounted on it with a 15 inch podium stabilizer and it feels better than my two bars felt and lighter!
This was hard to believe TBH, but it really does work with low pro quivers to help the bubble and pin steady at level. Makes side bars obsolete for hunting IMO.
MFJJ, purchased the offset bar and the 15” stabilizer to go with! Awesome craftsmanship and look great. Can you do a video on front/rear stabilizers? Explain to viewers (me) what length, degree (0, 8, 10) do, rear bar and what clocking them left/right up/down do? One issue I feel that I’m having is the bow wants to aim down when looking at the target, I have put weight in the rear to help with the front dipping down as I feel like I’m shooting low.
That's what I been looking for will it work on ss34. 400 grain arrow 30 1/2 draw 70 pds 314 mph I love that bow God bless thanks for all your knowledge
Gday Josh, not sure if its on the cards but a cool video might be a title 36 build for hunting / crossover bow? In Australia the title is only about 10% more than the lift, so interested to see what you reckon of it as a crossover bow.
Would it possible to stow the stabilizer vertically on the QD portion like the Cutter QDs allow you to do? That is an awesome feature to keep a lower profile when strapped to a backpack or pulling a bow up to a treestand through branches and around climbing sticks. Maybe a Gen4 revision?
Looks great. Is there ever any issues with vibration increasing since this isn’t directly mounted onto the stabilizer hole? I just wonder sometimes if a QD mount, mounted to a bar, mounted to another bolt into a bow would cause more vibration? More attachment points more chance for vibration? I could be completely wrong though as I have never tried it so curious to your thoughts.
You say it will fit any bow. When I called and described the riser on my Bear Species LD the person at you shop that I spoke with said it wouldn’t fit. On my bow the string stop bar mounting point is at the same level as the stabilizer hole and protrudes off to the side of the rises
You need to talk your product up more why would i choose this product compared to other etc get more im depth learn to put the product first not what you think i can see why the product would work but use a selling point instead why i think its good conpare other products selling point cost vrs particularly. Sell it dont rush it got infeild test against other make me want to buy a product that honestly looks shit compared to the rest soz im brutal but if it works so me how in feild learn people want to see it work in feild not over a basic indoor opinion test it bring and build faith to the product against others prove it works you know your shit lets see it
How can he prove that it works? It litetrally speaks for itself. It brings the weight over to the left, to offset the weight from your sight, quiver, rest. duh
Gen 4, incorporate a 10 degree down with QD!?!?!?
I have a 10-degree drop attachment for my stab, will this work? can i attach the 10-degree drop bracket which incorporates a quick disconnect.
Will this work for a lefty? If you flip it the quick connect faces down. Is that ok?
Super curious about this as well, us lefties get shafted like 95% of the time lol
Awesome wanna buy one for my bear adapt plus if it fits.
Sweet!
The Bowtech risers are wider than the norm. I needed to angle my Podium Gen 2 offset bar, due to not being able to mount it level.
Will Gen 4 have the built-in 8 or 10* drop angle for the stabilizer?
I like this as I did this in the late 90's to early 2000's on a Clearwater bow as I fought to keep it level with or without a quiver. In those days I took an old overdraw apart to do it. I have have been looking at doing this again as I do not believe I need a side bar for hunting. I'm now afraid at what the shipping would be to Canada. Thanks for the content
Sir can you talk about different ideas for archers with vision problems? With verifiers with peep and clarifiers? Any new updates
@MFJJ - will this fit on a Darton Consequence?
I bought a spider archery offset bracket last year and wish it had a QuickDisconnect. Might have to get yours, looks great
I just used a rear bar mount on the front works great I can offset it down any degree and even kick it out to the left a little.
What? No off set bar with a bridge lock aka dove tail hole? Version 3.5.
I imagine you could flip that backwards and have a back bar?
The day my gen 2 comes in you release this!! lol. I’m running the gen 2 with a 10 degree down mounted on it with a 15 inch podium stabilizer and it feels better than my two bars felt and lighter!
Hey Josh, Can you do a review of the OMP Tru-Center LAT?
Looks good - Is the finish anodized or powdercoat?
Would that fit on a Bowtech Icon? If it does, I'll take one.
would this work on a older mathews like the z7x
thoughts on mod saw or what is the best arrow cutter
Of course I have an ss34 😭
This was hard to believe TBH, but it really does work with low pro quivers to help the bubble and pin steady at level. Makes side bars obsolete for hunting IMO.
MFJJ, purchased the offset bar and the 15” stabilizer to go with! Awesome craftsmanship and look great.
Can you do a video on front/rear stabilizers?
Explain to viewers (me) what length, degree (0, 8, 10) do, rear bar and what clocking them left/right up/down do?
One issue I feel that I’m having is the bow wants to aim down when looking at the target, I have put weight in the rear to help with the front dipping down as I feel like I’m shooting low.
That's what I been looking for will it work on ss34. 400 grain arrow 30 1/2 draw 70 pds 314 mph I love that bow God bless thanks for all your knowledge
Gday Josh, not sure if its on the cards but a cool video might be a title 36 build for hunting / crossover bow? In Australia the title is only about 10% more than the lift, so interested to see what you reckon of it as a crossover bow.
Would it possible to stow the stabilizer vertically on the QD portion like the Cutter QDs allow you to do? That is an awesome feature to keep a lower profile when strapped to a backpack or pulling a bow up to a treestand through branches and around climbing sticks. Maybe a Gen4 revision?
Looks great. Is there ever any issues with vibration increasing since this isn’t directly mounted onto the stabilizer hole? I just wonder sometimes if a QD mount, mounted to a bar, mounted to another bolt into a bow would cause more vibration? More attachment points more chance for vibration? I could be completely wrong though as I have never tried it so curious to your thoughts.
I don’t get it. But then again I have never used a stabilizer in the mountains or flat lands while hunting
U should make one that'll accept bridgelock stabs
Make sure you recheck your tune after trying something like this. It could change
Do you make them for left handers or does it not really matter if you just flip it over?
I offset my costs and durability by not buying UV😂
I like this idea. I'm planning a revival for my old bear limitless and this will be perfect.
Will you be doing a review on the new Spot Hogg Boonie sight?
make it with a 10-12 degree drop and i'm in.
I've been running the Gen 2 offset on my Levitate, works great.
Great product cause it's just what I need
Y’all get the new SpotHog Boonie in ?
Do you have left hand available?
Prove it works lol sell your product properly
Cool offset bar MFJJ. I am sure it works well
You say it will fit any bow. When I called and described the riser on my Bear Species LD the person at you shop that I spoke with said it wouldn’t fit. On my bow the string stop bar mounting point is at the same level as the stabilizer hole and protrudes off to the side of the rises
I believe he said almost any high end bow
I can't wait to try one out this year.
Thank you Josh
Very cool. Good idea!
Gonna need one to try.
Pretty cool.
You need to talk your product up more why would i choose this product compared to other etc get more im depth learn to put the product first not what you think i can see why the product would work but use a selling point instead why i think its good conpare other products selling point cost vrs particularly. Sell it dont rush it got infeild test against other make me want to buy a product that honestly looks shit compared to the rest soz im brutal but if it works so me how in feild learn people want to see it work in feild not over a basic indoor opinion test it bring and build faith to the product against others prove it works you know your shit lets see it
you make no sense
How can he prove that it works? It litetrally speaks for itself. It brings the weight over to the left, to offset the weight from your sight, quiver, rest. duh
Ps get rid of the hairstyle we want professional not a mid life crisis articulate your knowledge not just i think im the best prove it
Go take a coffee bud
How many men have you been with?
Thank you
I need one of these. Cool shirt MFJJ