Adding Tire Pressure Monitoring System to a BMW e46 for FREE + Announcing Giveaway WINNER!
HTML-код
- Опубликовано: 7 янв 2019
- This video is about Adding Tire Pressure Monitor System (TPMS) System to a BMW e46 for FREE. In this video I will show you how to retrofit/ retro code TMPS system that utilizes the cars wheel speed sensor. The system that will code is using RPA not RDC. All you need to do this is INPA and NCSEXPERT. If you need help installing INPA and NCSEXPERT. Check this link out: • HOW TO CODE YOUR BMW U...
Link to K+dcan cable (used for coding): amzn.to/3aLaw9J
Options to code:
Description~String~Options
1. Tire Pressure Control System (RDKS)~RDKS~aktiv
2. Can-Bus Tire Pressure Control (RDC)~CAN_RDC~aktiv or CAN_RDS~aktiv
3. Tire Pressure Control System (RDKS) Warning Gong~AKUSTIK_RDKS~aktiv
4. Output Device for tire pressure control system (rdks) warning~WARN_MEDIUM_RDKS~gong / (piezo)
Once this is done, you'll need to code one line in the MK60 module. The line is below.
Description~String~Options
1. Tire Pressure Control System (RDKS)~REIFENDRUCKWARNSYSTEM~aktiv
Link to full guide with TMPS button: www.zhpmafia.com/forums/showth...
#BMW #TPMS #DIY This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. This video is for entertainment purposes only. Evan Goyuk assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video. 
Авто/Мото
![TOP 5 Best Tire Pressure Monitoring System [ 2024 Buyer's Guide ]](http://i.ytimg.com/vi/hVH0wOKn504/mqdefault.jpg)
![mgk - I Think I’m OKAY (with YUNGBLUD) (Sad Version) [Official Music Video]](http://i.ytimg.com/vi/7AC1uqQLIg4/mqdefault.jpg)
Amazing job!!!! Thanks for your great vídeos
This is great! Good instructions!
Thank you, it’s pretty easy to do and it’s an awesome feature to have.
Can you make a video about how to swap a dme to a vehicle? I have an e90 that need a dme swap, I have the new DME. If you would like to do it remotely just let me know, thanks
Hi Evan! Do you know if is possible to do some set on when warning goes On. Like if diference speed betweens wheels be 30% then get signal on? It is possible to set anything ?
I dont have the line "CAN_"
The simbil lights up on the dash but can.t resetet via inpa because i dont have the option...i have an european e46 318ci from 2000
I believe DSC is necessary. For cars with ASC it will work?
Does this work reliably?
I think i cannot calibrate mine
I just have the light on now
It would be greatly appreciated if you upload the same files that you used to install inpa/ncs expert so i can install the same software because i am having problems finding them online
Check my video out on how to code your bmw. It’s down in the description it will teach out everything and all links work
Are you a member of the ZHP Mafia forum? did you contribute any to that thread for retrofitting the MK60 TPMS speed sensor based monitoring system? DId you mention at all that though most MK60 will support this, only the early coding index units from 2003 ZHPs and the m3 coding index variant of the e46 M3 MK60 module will support the button OR if you get an MK60 module from a parts car that came with TPMS from the factory.
for a lot of people that do this they will have a TPMS system that works partially, and when they get the indicator for low pressure, the button wont reset the system and they will need to use INPA to reset the system.
will the car register the wheel speed difference with the thin 35 sidewall rated tires?
Probably not
Hi Evan! So just to be clear. This only works with DSC applications and ACS traction control cannot be reteofitted with this?
Correct
Thanks for noticing, thanks to you I did not bother to try code mine ACS system.
In case anyone else comes along like me and tries to do this on their E46 xi ... don't bother. Those cars don't have MK60 (a requirement which isn't mentioned in this video) and need an additional module for TPMS.
Sorry to bother you.......
Do i have to buy and install RPA module ?
(E39 520i)
You are not bothering me I am here to help my friend! No so the RPA system uses the wheel speed sensors to find out if one tire is lower than the others it compares the revolutions of the tire. The only thing you could add is the tire button reset because if not you have to use inpa to reset each time.
@@EvanGoyuk thanks reply...
When i checked RPA informations on Google. There are not many informations about E39 series (Most of RPA or RDC is about M5). And i found out. If i want to use RPA, i have to RPA module.
I just want to know below Q.
*Not buying RPA Module?
*Only need for coding?
● in fact,
I already installed INPA and EXPERT.
and i can use it a little.
So. For setting tire value, i don't need
another switch for reset.
Thanks for this. Was just dealing with this after my swap. If you want a mint M3 headliner to replace your saggy one, shoot me a note.
Yes I would love a new headliner
Evan Goyuk I’m in CT near casinos. It’s a M3 one so it’s anthracite like the ZHP cars. $125 and it’s yours. Perfect condition.
Is it just the head liner or is the also the pillars?
Evan Goyuk it’s just the headliner. Pillars typically are 250-300 for a good used set.
Hm let me think since I would need to find pillars in goo condition
Is the reset location changed in new inpa? I cant find it. If I press activate and view the options (f7 ) is greyed out. Menu also show different stuff than yours. Break bleeding test / calibrates etc is in there. Is it still up to date? I do have dsc.
Do you have the mk60
@@EvanGoyuk yes
Found a solution? I have the same issue. It triggered the warning and indeed my tires needed some air. But no I need to reset it. Cant find it anywhere. Do we need te de-program it and turn it all off? Edit. Lol responding to my own comment lol
@@PrimalFury Did you end up finding a solution to this? I have the exact same problem. I got a flat tire a few days ago and it worked, but now I cannot cancel the red light. I even tried the reverse steps to “decode” the feature, but when I recode it the red light comes back on. RPA is greyed out and I only have options to activate the brake bleeding...
My reset option f7 is greyed out also. Followed the video witch was super understandable and clear, but cant reset in inpa😭
Ho Evan
Once the AKMB file is modified, renamed and coded, do i need to delete the TRC and MAN files before reading/writing the MK60 module?
No, NSCEXPERT will write over the file and clear it out
Evan Goyuk
Thanks Even. Got a question on this retrofit. The older E46’s (99-00) appear to not have an “AKMB” module but use a “KMB” module. I was unable to read the AKMB due to a COAPI 2062 error but the KMB is fully readable. The KMB TRC file does not have the line CAN_RDC or CAN_RDS and i do not have an MK60 module either.
My car is a 2000 model, production date 12/99. I read through the ZHP Mafia thread you posted but no other E46’s besides ZHP’s did this modification.
Darn, i was really looking forward to get this working on my 328ci.
Hmm let me do some research. I do not have a zhp. I have a 2002 bmw 330ci.
Evan Goyuk Ok. Let me know if you find a way. I am researching as well. My car has an MK20 module. I read out and saved copies of all the module files. My MK20 does not have the data line required to modify specified for the MK60 module
With coding 3 of the 4 required lines (CAN_RDS or CAN_RDC are not in my cars KMB module read) to my KMB module, the TPMS icon lights up on the dash but it stays on all the time. Tried the reset through INPA but that does nothing.
Can the line my KMB module file doesn’t have be added along with the line thats modified in the MK60 be added to the MK20?
@@markperez6195 if you have an e46 that oly allows the reading of KMB and not AKMB.. that means you have an older e46 usually with the round connector in the hood which also means you do not have an MK60 module thus this wont even work for you. you need an MK60 DSC module, the MK60 resides driver side under the booster/MC and is usually on face lift e46 M3 2003.5 and above, all e46 ZHP cars coupe/vert/sedan and late model e46 cars. older e46 and XI/AWD e46 have either MK20 (RWD) or Bosch 5.7 systme both which reside in the drugbin passenger side area.
Also its a better idea to use NCS Dummy in conjunction with NCS Expert. nCS dummy will show all information from your trace file in english AND when you are done modifying the trace file with your option and choosing export to MAN file...you use NCS Expert to write your MAN file to your module and when NCS Dummy closes it asks you if you want to clear out the MAN file and you say YES.
Reason this is important.... NCS Expert default setting is SG-Coderiedn which is WRITE.. if you have an OLD MAN file lingering and you accidently hit execute with at MAN file in place, you coulc potentially write data for the wrong module OR incorrect old out of date module data.
Hi
My vehicle is E39(2003y 520i)
Is it possible for E39 ??
Yes it’s probably is you would have to do some more research
@@EvanGoyuk You say....
This is Basic Function in e46 module?
(We just use Inpa+Expert)
Not buying any different module??
배드민턴레슨닷컴 공식채널 badmintonlesson correct
One more Q.
If i want RPA coding like you.
Do i have to buy and install RPA MODULE ?
( i saw RPA module in some forum)
Is the software free?
Yes
note that this only works on the E46 LCI (facelift) models!
but his car isn't facelifted right?
his car is a pre-facelift
Hello, I'm a follower of your channel, buy a bmw e46 year 2002and I'd like it if you can only add the subtitles in Spanish please. I would really appreciate it . Thanks and greetings from Chile
Não queres mais nada? aprende ingles.
It's not tire pressure monitoring, it is run flat monitorin called WDS or RPA. RDC need sensors in tires. This one works via DSC and warn you when your tyre have no pressure. RDC (tire pressure monitoring) works different. If pressure change from fe. 2.4bar to 1.8bar then it warn you.
Talk to much....