KEURIG k. compact , This is a tutorial video on how to fix KEURIG in seconds took me 10 MINUTES
HTML-код
- Опубликовано: 28 окт 2024
- drop a comment like and subscribe and check out my new patreon account
My carry K contact was malfunctioning, All lights were stuck flashing quick fix on how to repair....
Madmikescustom hit that like button & Search scribe for more info in life lessons on how to save money
/ madmikescustom1
Thanks for this video. It pointed me in the right direction.
For those who watch this and find that following the instructions don't work, revisit the reassembly instructions that start around the 1:33 mark of this video. That little plunger needs to be on the INSIDE, not the outside. So as he shows at 1:37, flip the bracket over first, then insert the plunger down into the bracket with the wide/rounded part downward, then place the spring on top of that, then the washer as he shows, then insert that into the upper side of the fill assembly. That small change allowed the fill assembly to fit back into the coffee maker, and then the system worked as expected.
Removing the valve you show and blowing it clean with a WaterPik cured mine. Thank you.
Thank you for this!! Fixed my stupid keurig in less than 20 minutes bc of this
Thank you! You are a life saver, ❤ I spent a hour trying to figure this out. This simple little task worked! Thank you so much.
Like and subscribe please
Ride on subscribe please and thank you
Thank you so much, it worked perfectly! I called Keurig and they told me it's a lost cause, but all along I've been looking for a video like yours!
Your quite welcome
Thank you!! I used your trick on a Keurig that I was about donate out of my storage unit bc it hadn’t worked in over a year! I couldn’t be happier
Thank you!! I’ve spent over an hour watching videos and trying to do what they say
This is the only one that worked! I took out the pieces and there was build up on it!! THANK YOU!!
YOUR WELCOME. LIKE AND SUBSCRIBE
It actually worked despite not having a way to pour water through the narrow hose. Instead, I did what somebody else recommended on this thread. I blew into the hose about 20 times and it cleared. Make sure you have a cup on hand, to catch the water that comes out after each time you blow into the hose.
I take into consideration what you said, and I’ll go ahead and record a teardown video & reassembly video
Finally! Hats off to you sir! After searching the Keurig website and countless videos, this finally worked!
Like and subscribe your welcome
Like and subscribe
Yes!!! Thank you!!! Almost went out and bought another BUT you saved the day.Thank You ! Thank You
Thank You! So much this worked for me. I was about to give up and just get another one. I didn’t know the the top part could come off and that helped me a lot. Thank You! Thank You! Thank You! Once again. I hardly leave a comment but your video explained it to me a way I could understand and fix my issue. I can’t thank you enough for this video. Thank You! Thank You! Thank You! Thank You!
Your welcome. Please subscribe and like the video thank you
Love the ease of use. I recommend desalinating once/year.
I tried soooo many videos and yours is the only ine that worked l. Thank you sooooooo much!
Glad I could help! LIKE AND SUBSCRIBE PLEASE
Yes! I've watched so many videos, but yours... you had the magic advice!!!!!! Thank you! ☕
Wow thank you like an subscribe please
You literally just saved my life lol I been watching videos since last week trying to fix mine
Glad I found this video first. Exactly what was wrong. Simple clog. Ran a paper clip through it, the ran two cycles with no K-cup to flush and back in business.
Like and subscribe
This tutorial is good, thank you. FYI keep working at it, many many times, mine works now but it took me a good 2 hours of repeats. TY
I try
Thank u for not putting that little thing with the spring in it cus I was having many issues with th3 spring bouncing off as I was trying to put it back together saves me akir of time and frustration so those little parts are not needed thank goodness less build up issues too
Ride on brither
Brother
Subscribe brother
THank you. It worked. 😁 I also spent an hour looking at other videos.
Yes
Thanks!!! You saved me. I was trying to install the thing with the spring and seal in wrong. If I leave anything torn down too long I'm in trouble.
Of course many of us do not have this model. On mine the plastic pipes cannot easily be taken off as shown in the video. In fact, it seems that whenever I try to fix anything after watching youtube videos, it always turns out that my model is not "easy" like those typically shown in videos. I have seen any number of Keurig fix videos already, and none of them have helped in the least.
Hey, so with yours you wanna go from the outside and take a little needle and just clean out the peg that goes inside of the little coffee cups it gets clogged up basically that’s what I do. This will just be the backwards procedure. I just never made a video about it. I will know that you said something.
Also, God bless your soul for the word unique wonderful idea
Thank you! I thought mine was broke! It works perfect now
You really didn't explain...by showing anything???? you just talked....lol
How did u get the top part of the Keurig off? Can it just pop off or take out screws?
Either pops offered has two screws but I’m pretty sure you can just pinch it from the top hip-hop of red off
Thanks so much, I haven’t figure out how to remove the mechanism that is after the lid
Quite welcome
I’ve been working on “popping” mine out for an hour now. It’s not coming out?! I’ve tried pliers, squeezing sides together and everyone . How are you able to get the darn thing to “pop” off? I’m talking about the thing the hose is connected to.
Thank for saving the morning for my coffee.
You’re welcome like and subscribe please
okay....so those little gasket peices.....did you have to buy replacement pieces for it...or was it that you just didn't put them back in? Your video was very helpful!
bro. so helpful. but i cant make my moms work. i think the littler tube is disconnected from thr inner body of the machine. am i nuts to take it apart?
Watch the bideon
Video
Hey man! Great video and help. My Keurig is working like brand new with your instructional help ☕☕☕
Yes yes
Any selections for a new video
Hey, I'm enjoying my fixed Keurig. I used diluted vinegar to scale off coffee build and water minerals in the machine, run it just like water.
Like and subscribe please
Just tried this, and it worked!
LIKE AND SUBSCRIBE PLEASE
Thank you. Your video saved my life.
It works!!’n. Thank you!
You’re welcome I’m actually thinking about doing a part two to this video since I did so well when I first made it to go into a better description for tear down breakdown and yeah
thanks man fixed mine with this vid
can you share how you put it back together? I tried to do it the way you showed, have tried a bunch of other ways and it is together but not drawing water so I dont know if I did it right?? i saw your comment below to not put the parts back, will it work that way?
WHEN YOU OPEN THE PLASTIC TOP THE WHITE SPRING IN THE MIDDLE HAS TO BE REMOVE AND AS FAR AS FLOW CHECK THE NEEDLE THAT POKES THE POD. IT FILLS WITH COFFEE GROUNDS
Just went to clean mine out seeing there was a lot of sediment in the chamber, thinking I could put some vinegar in there to help losen it up by plugging the hole, first mistake, didnt unplug. when I saw the vinegar was going down I just though it was trying to level out, BUT the chamber must have holes in there as it started to leak out the bottom AND without turning it on the lights came on..... Well, now trying to get to the center chamber to see if I can dry it out and make it work again... this video didnt go far enough to explain how to remove the bottom HOPEFULLY thats all I need to do.
Respect
Thank you !! It worked!!!
This worked -- but you also have to remember to move the water dispenser also -- to gain a reset
LIKE AND SUBSCRIBE
Thank you!!!! Saved the day🙂
So glad! PLEASE LIKE AND SUBSCRIBE
Thank you - you seriously saved me as well !
How do you take the whole top piece off though and actually get to the inside to clean it?
You have to pop the cap off or top of the coffee maker
I stuck a paper clip in the holes. I put vinegar where the water goes to clean the pot. I have always felt that was enough. Be sure you rinse the vinegar out good! You don't want your coffee to taste like vinegar!
Omg thank u!!!!!!!!!! Ur a life saver!!!
Quite welcome... like and subscribe please and thank you. Any ideas for a video that could help your life
Thank you helped me a lot
Your welcome, like and subscribe, any suggestions please let me me know
So... do you ever put the part back or what? My coffee maker is working again thank you so much!!!!
No i dident i showed it on the video
omg saved my night ! thank you !!!
Welcome. Click like and subscribe
Hey so I took the piece out but it’s still not tight . The water comes out
More details i can help
It’s so hard to put the piece back. I ended up buying a new one 😅
Omg nooo
where did you get a new part??
So I took of that piece yu had Already changed and now I have no idea how to place mine back in the correct way. Plz help
Yo same!!!
Just dont reinstall the other stuff
@@madmikescustomDaily will the coffee maker work without it?
Thank you.
Omg it worked!!!! Thank you!
Bro. You fucking fixed my machine! Thank you!
Your welcome
I have the same machine, and it is overflowing a 12-ounce cup, no matter which brew button I push. Does anybody know how I can fix this problem?
Bigger cup
@@madmikescustomDaily HA HA! You rascal! 🤣
How did you get the seal part off
I got now , thank you
Mm depends if it comes out or not
Dude thank you so much.
Thank you!!!
Love y oh homie thank you
Worked. Thanks!
Like and subscribe
Where did u get the parts from
I remove the white spring inside. Amd i clean the needle that pokes in the pod. Push a neddle tru it to get the coffee grounds out
I believe he meant the replacement parts, I’m assuming you ordered from the internet. I’ve been trying to find some myself some replacement parts such as those you showed in the video.
Mine didnt work!😔😩😭 it makes like a vague noise and its not filtering or reheating water at all!! All lights are on all the time and wont turn off or on...HELP!!!
CHECK THE NIDDLE THAT POKES THE POD IT GETS CLOG
Omg well remove the top amd pull the white cap out amd the niddle gets clog
How to put them back???
Im literally about to trow them trough the window LOL
Did u end up putting it back together cause I can't for the life of me get together rofl 🤣
Of course I did on the same 30 minutes
I couldn’t get the piece back in either, the reason was because the one piece with the rounded end, you put it on the wrong side it should go on the side where the spring is not on the bottom!!!!!
How did you put it back together
Thank you for saying. I was able to get it back in and working again.
@Rosiee Andrea can you share how you put it back together? I tried to do it the way he showed, have tried a bunch of other ways and it is together but not drawing water so I dont know if I did it right??
Good thing i bought the 2 year warranty lol
I have a problem with my keurig, it doesn't want to turn on.
That’s a good question what’s not working so u plug it in and nothing
Yes, several time unplug, pushing on/off button. Nothing...
Mine keeps blowing out stem!!!!! ??
CHECK THE POKER\
THAT POKES THE POD , CLOGS WITH COFFEE GROUNDS
The plunger needs to go the other way around, rhese instructions are wrong
cant open the top
This is bull sh!t! why does this product do this!? I gotta take this thing apart to fix it!? F that! But thanks for the video
Yeah, right. Show us the very piece I need to put back in and you don't show that part. I don't know what it's called and that really hinders my online search. I looked at some schematics but they must require a PhD in confusion. Sooo, damn. Damn again. And for good measure, damn, damn, damnation!
What’s up
Remove the white peace in the inside as I show and then in the Needle part poke a tooth pick and get the grinds out loos closely you will see the holes that the grounds get stuck in if you take apart the top cap you can clean from both sides and then reassemble just leave out the spring Basically the internals
Mine just quit working
#destory it