wickedoil.com review of Thunder Torque Inserts from DK Performance
HTML-код
- Опубликовано: 6 сен 2024
- Sep 2020 Review of my new exhaust inserts.
They take some tuning to get them right, but they do work.
I prefer the sound of the open pipes, but I like the peppy response of having the Torque inserts installed.
www.dkcustompro...
If you want your ride to run cooler, have more power, and last Way longer, switch over to AMSOIL 20w50 - my Harley runs 25degrees cooler with AMSOIL
wickedoil.wboil...
Application guide
www.amsoil.com...
When you first installed them and you say it was running well at lower RPMs but then it would fall on its face when you tried to accelerate etc., did you read your plugs/try to figure out how your air/fuel mixture was, and the I'm asking is I'm thinking maybe with that breathing change on the exhaust and you possibly needed to reject that carburetor, when you make a major change like that, it likely will affect your intake air/fuel mixture.
I've been running thunder torque and search for years and put them on several bikes. And the low end torque is way better. And I don't know what you're doing wrong.
Thank you for sharing your experience details. And, congratulations on your really good engine temperatures!
At 3:05 you mention the specific insert that you now have, 158W. I have to bet that, those numbers and letter,
represent 1 and 5/8 inch WIDTH.
Yes, it's 1 5/8" (circle) insert.
Honestly, I like the sound and the performance of the baffles in my Vance and Hines.
But, each to his own.
Thanks for the comments! As stated in the video, I tried turning the inserts to various angles until I found what worked. The problem was, I could never find a setting that gave me good bottom end And good acceleration performance. I got one or the other. Yes, I could buy smaller inserts or grind these down. But honestly I was like, fuck these things! If they were as cool as they are advertised to be, it wouldn't do all this horse shit to make them work right. They do work, but so do the muffler inserts. In fact, the mufflers perform Way better, on my bike.
Yes, I have tuned my bike. Its jetted, I have anti reversion cones at head connections. Performance ignition etc... Bottom line, the inserts are sitting in the box with the piece shit Lectron carb I wasted $800 on. If you guys want to try these inserts, try them out. But I'm telling you, my Vance and Hines pipes perform AND sound Way better than these bullshit inserts. Thanks!
Made them myself with two bolts,two large 1 1/2” washers slightly bended all welded together as a “lollipop” as you say. Mounted them between 1 and 2 inches into the pipes, and yes…they definitely improves in the low to midrange torque, when exceeding 4-4500rpms I couldn’t tell a difference. Costed me nothing since I had the “materials” lying around 😂👌🏻
In the video it looks like you have those thunder torque inserts in backwards
The w158 was the part # for 2” -2 1/2” pipes. You got the wrong size.
According to the DK Performance website, where I purchased the inserts, the 158's FIT 2" diameter & larger Slip-ons (other sizes available)
the 118's may well be a better choice. But truthfully, they can stick their inserts in their ass's. Complete waste of time as far as I am concerned.
@@jeffmclowry Sir, I've become confused regarding whether you endorse this product or not,
and I respectfully ask for your clarification. I'd really appreciate it. Thank you for your time.
(1) In your comment above to Jeremy Haynes you say,
"But truthfully, they can stick their inserts in their ass's. Complete waste of time as far as I am concerned."
(2) In the video at 6:18 ("It works pretty damn good.") here are your words audibly:
ruclips.net/video/-zQIZVzyS7Q/видео.html
(3) In your original description that you typed up when you posted this video you included,
"They take some tuning to get them right, but they do work." and you include this link to the product:
www.dkcustomproducts.com/catalogsearch/result/?q=THUNDER+TORQUE+INSERT
@@BigFiveJack LOL seriously right how stupid.... probably the worse review on RUclips... Hence just 90 subscribers.
@@BigFiveJack I'm in the same boat. Does he "like the peppy response of having Torque inserts installed," or think they're "...worth it? Yeah, sure, maybe," or are they a "complete waste of time"?
the inserts are supposed to be 3 inches from the end.
Looks like somebody hacked your account because of the 2 totally opposing views of the modification.. also, Did you think about pulling them out and grinding them to a smaller size? I don't think you mentioned the sound changes(?) or if any.
They seem easy enough to remove so, maybe take them out and grind them down from the size of 50 Cent pieces to maybe the size of a quarter or a nickel?
Friend of Bill I see. Good man!
If they’re only 30$ Why not buy the smaller ones and try them?
Straight shots
Anytime someone tells me plugging up my exhaust is gonna give me more power I'll just say mine has plenty already.😂
Yes of course, you're correct on that. But, a basic understanding of the necessity of a certain amount of back pressure in the exhaust shows it to be a positive point.
Believe me, I spent most of my life thinking zero back pressure was the ultimate goal. I was wrong and I have proven it to myself repeatedly. The fact that these inserts didn't work out for me in this instance just shows that I didn't workout the details to Tailor them to my application.
Why ddb't I work out the details? Because it's not important enough for me to spend that much time in the endeavor.
It's less bullshit to just trust the aftermarket exhaust and tune the carburetor to work well with it.
It would be better if you turn on the engine next time :D
Certainly a valid comment. But... No matter what, you're not going to hear what the bike sounds like over the internet.
I was thinking about starting it for a sound check, but I decided it wasn't going to accomplish anything. Sorry to disappoint!
Nice Fatboy. I have Vance and Hines long shots on mine.
Like the sticker too 👍.
I run V&H Longshots on my 97 Heritage, and I wonder how these inserts can be used without damaging the heatshields. If anyone has an answer, I'd appreciate you sharing it with me. Seeya! 🇺🇸☮✌
Do these require a re-tune?
no need to retune
Don't let us see them or listen to them genius
I realize its hard not to be a jackass, but try!
You can't say "Fat Boy".It politically incorrect.
It's now the "Heavy Boy".
Good one! lol
Maybe I should call it my Heifer. lol
This review is VERY lame...the extension of the pipes alone is an affirmative nod to African American Engineering; c'mon!!!🤔
your point?
Racist
Someone did a washer test flat, 45* and parallel and found parallel to be best results
Good To Know
@@BigFiveJack go to DK customs for it can buy a single one or 2 of them. And they range in sizes to your application needed.
I made some lollipops for my 93 Heritage about 1 5/8” from eye hooks and flat washers. As DK customs recommendation for 2 1/2” pipes. I also removed the baffles and it seems to have woke it up. It is louder but not obnoxious. I like it!
I'm sorry I don't quite understand what you mean by parallel? Is that the standard recommended direction with it being flat in the center as they recommend? I just got 118 for my 2 1/4 inch mufflers and installing them in a few days and I wanna get it right. How should I position them for best results?
@@CantTreadOnMe you put them at 45° parallel would be Sideways. We only see the edge in the other way, would be where you see the whole thing and blocks the majority of the hole
Junk, big city thunder works