Damaged And Rusty Gumball Machine Restoration [With a lot of candy]
HTML-код
- Опубликовано: 2 авг 2024
- In this restoration I make a trip back in time to my childhood, because I restore an old gumball machine. Many years ago, similar gum dispensers hung on the walls of houses and you could get candy from them, I was there many times :) When I saw this, I'll call it, antique gumball machine on Ebay, I had to buy it and make a restoration video.
▬ What did I do ?! ▬▬▬▬▬▬▬▬
Of course, the first step is to disassemble the old gum dispenser, which I did in 2 stages. First the dispenser itself then the coin mechanism. I remove most of the old paint with paint stripper. Using slag as a blasting medium, I blast off the rest and also so roughen the surface for the new paint. After that I spray primer on the parts, roughen the dried primer with sandpaper and paint everything in red colour. The flap for the gum outlet is aluminium, which I dent out and sand with sandpaper for a great new look. The parts from the coin mechanism are only washed, the front panel is sprayed in silver colour. The heart of the gumball machine is the storage container of the gumballs, this has a huge hole in the side. I remove the old glued plate, cut it to fit and glue it flush again. I cover the inside with cling film, so that plaster mold later is easier to be removed. (tip: do not use spray glue, as I did in the video :)). On a plate I place a pipe and the old storage container, which I fix and seal with acrylic. Then I pour plaster into the mold, let it dry, mend out some spots and sand the mold. Now my thermoforming frame, from the last video, comes into play. Unfortunately, it worked out only at the third attempt, because I simply still lack the experience in settings of the parameters (correct temperature, material thickness, ...). Now all components are ready for the reassembly, and finally just fill it with gumballs and feel transported back to the childhood :)
Delicious, these chewing gums...
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: screwdriver, tweezers, soft-face mallet, water, soap, brush (Turtle), paintbrush, paint stripper, blast cabinet, slag blast media, primer, red paint, silver paint, hot air gun, spray adhesive, putty knife, plastic wrap, aluminum tape, clamps, KG pipe, acrylic, cordless screwdriver, whisk, plaster, saw, vacuum cleaner, thermoforming frame, pliers, candy :)
▬ Chapter ▬▬▬▬▬▬▬▬
0:00 Have a look at the gumball machine
0:24 Disassembling
3:48 Stripping and blasting
4:51 Fill and sand unevenness with fine filler
5:28 Apply primer and roughen with sandpaper
6:12 Spray on red paint
6:49 Washing the parts of the coin mechanism, dent removal and sanding of the flap
7:30 Preparations for plaster mold
9:54 Casting and processing the plaster mold
12:12 Deep drawing of the new gum dispenser
13:37 View all parts
13:46 Assembling all components
16:12 Filling chewing gum dispenser and function test
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks! 
Наука
![Roller Cookie Machine Restoration [Bake Cookies]](http://i.ytimg.com/vi/vYELHe_zIGQ/mqdefault.jpg)
![Roller Cookie Machine Restoration [Bake Cookies]](/img/tr.png)
![Rusty Electric Stove Restoration [Camping Hotplate]](http://i.ytimg.com/vi/fPHFZNe19M0/mqdefault.jpg)
![Cleaver Restoration [Golden Cleaver With Golden Handle]](/img/1.gif)
You got yourself another subscriber. I wouldn't even be able to keep track of a fraction of all those little pieces you disassembled. Pure talent.
Thank you very much!
As someone who likes candy and taking things apart, this made me very happy. Subscribed!
Thank you very much!
was the sheet of Polyethylene terephthalate the thickest that would work with your vacuum setup? I see it distorted under the load of gumballs. did you consider adding ribs or raised patterns to add to its stiffness? drinking ginger ale out of a PET bottle as I watched this, thinking about its design....
Gw disini sebelum anak meme menyerang dan sebelum title diganti☕🗿
Genial, restauração fantástica, que só pode ser concluída por um genio🇧🇷
Dude this is so cool! I wish I had one of these 😂 Amazing work, as always! 👌🏻👍🏼👍🏼
Dr. Hut of Handcraft thank you, bro!
I love gum ball machines. I had bought one for my daughter when she was little, I kept the coin part, she had to earn penny’s her self and it helped her to learn to ear money.
Thats a good idea 🤔🐢
A magician this guy is ❤ Another great piece and video!!
🤗🤗
A German one. Back in 90s I loved them
Actually"Tolol" dude👍
Very relaxing to watch
Изумляющее мастерство!
amazing work, I liked the part with the candy
hutzner thank you, me too
Thank you for sharing your hard work Beautiful and sweet job!
Hey Maria Assante. Thank you very much!
Você é fantástico!!!
Brasil
Someone really wanted those gumballs and they did not let anything stand in their way! 😂
Nicely done!
Sue Nichols thank you
Nice work restoring that gumball machine. It looks much better than it was and it works like a charm as well.
Thank you very much! 🐢
Amazing job! 👏👏👏
Workshop DC thank you!
Sweety gumball machine. Cool working.
KONUM restoration thank you bro!
Oh my! That was sooooooo much fun to watch- multiple materials, a cool finished product *chef's kiss" 👌🏽
Thank you very much! 🐢
Perfekt gemacht, sehr sehr schöne Restauration.
Danke für das Lob! 🐢
Title: Damaged And Rusty Gumball Machine Restoration [With a lot of candy]
Google automatic translate: Pemulihan Mesin Tolol Rusak Dan Berkarat [Dengan banyak permen]
Mesin tolol: Stupd machine
Thank you for the Tipp!
Awokawokawok
I love it
amazing job, looks like new!
Thank you very much!
Sehr geil gemacht habe die Teile in meiner Kindheit geliebt ❤️👍👍👍❤️
Pascal Jeske Danke :)
His little turtle brush 🥺 so cute. But great work!!
Una restauración maravillosa!!! Enhorabuena por tu trabajo 😉
¡Muchas gracias! 🐢
Wow nice job ,and this is so satisfying 👍👍
Thank you!
Really good job with the restoration🙂 The amount of different things I learn about every video is staggering😂👍
🤗🐢
I love the first initial pop of a rusty screw coming undone
Gw datang karena meme FB dan IG anjir
Sama
Mesin tolol rusak
I remember those things. You could find them in every pub in the 90s. I wasted so much of my parent's money to get some sweets. :)
😅👍🐢
Meine Kinder holen auch heute noch aus diesen Automaten Süßigkeiten raus. Vorher muss man meist noch die falsch gewählten Münzen aus dem Münzwerk fischen und dann rein mit der richtigen Münze.
Ist ein schönes Stück Kindheit(serinnerung).
Schöne Arbeit!
Sören Kache Danke! Das Münzproblem haben wir ja zum Glück beseitigt :D
Not sure if you’ll see this but we just bought a 3 column candy machine.. the springs that dispense the candy have rust… how can we get that off? I’d rather try to clean before replacing the parts which I can’t find online anyways.. any help would be greatly appreciated! Thx!
Nice job. I’d like to have that. Gum balls are a weakness of mine. Say hi to 🐢
🤣🤩🐢
Hi! I found your channel via your comment on Mister Patina's community post, so I came over here to subscribe! 🙂
Hello and welcome! 🤩 Thank you very much! 🐢
Very nice my friend! 😀
Dr Restoration thank you bro!
I've watched other videos of yours. I've seen you electroplate, I've seen you powder coat. I'm curious why you used aerosol spray paints on this project.
this is really cool. like👍
RESTORATION OF SCRAP METAL thank you
bit of oil or petrol oil inside helps with the mold release.
What grit sandpaper to use to sand down if you don’t have a sandblaster
Nice video. Keep going!
Oh No thank you!
You missed the red paint spot on the top left at 15:12.
Impresionante eres un crack
¡Muchas gracias!
Amazing work and amazing title
Thank you!
Awokawok
Tbh i dont know what i expect for a terraforming process to look like until i see it
Time and Patience is the way to go
I have a question..How much would it cost to get an old gumball machine restored?
-Cómo tan muchachos, yo los veo a utedes muy bien, creo que han trabajado muy bien ¿Que les palece una lecompenza?
-¿Como un día libre?
-¿Que tal pal de chicles?
-Si, estos días hemos trabajado mucho
-vamos... Cupete la mano...
vamos, tragatela papi
-vu-vuelvo al trabajo
-no beison, déjalo así, yo no quiero ningún chicle, yo me veo voy a trabajar
-Vamos papi, nadie nos va a ver, tu eres tan bueno que creo que te voy a dar dos bolitas
-es que no quiero
-si tu eres bueno conmigo, yo lo soy contigo
-la primera... Y la segunda ah. No sé lo diga a nadie... Despué se ponen celosos
I'm rehabing an old candy vending machine, and the top is plastic, and has yellowed with age. How do you recommend getting the plastic clear again?
0:14 Those gum-balls were expensive! 10 pigs apiece!!
Any idea what brand it is?
My grandparents had a gumball machine a bit like this at their house my whole life and it recently came into my possession (and the coin mechanism was broken.) I’d like to do something like this restoration, but I don’t have tools like a sand blaster. Is there something else I could do or should I just try to find someone who can help me with this? Especially because I don’t know exactly how old it is and I’m a tiny bit worried about lead in the paint.
I recommend you take it apart and have someone sandblast it. Then you can put new paint on it yourself, clean it and reassemble everything...
Very nice 👍
Thank you very much! 🐢
wait why is the original title missing 🗿
This is the original title.🤔
Pemulihan mesin tolol rusak dan berkarat [Dengan banyak permen]
awkoawkok
So this is what happened to Benson
I was somewhat expecting you to fill in the hole in the plastic with epoxy? I can see that being possible.
This machine is not too rusty or bad condition
Great restauration. It’s possibile contact with this person?
That turned out really sweet, sorry about the pun. While I applaud you for creating a new container, wouldn't buying one have been cheaper? The rest of the job was great, thanks for sharing. 😁👍🇨🇱🇺🇸
Of course that would be cheaper, but "the way is the goal"
The globe is available for this machine ,good job though
Komen sebelum rame
ガムって美味しいよね
I think I have that jacket. Jaco?
Waouh I like it 🏅🏅
Thanks!
The amount of work holy like n sub
Kasih tau klo dah rame orang Indo 🗿🏃♂️🏃♂️🏃♂️
Erinnert mich an meiner Kindheit. In der Nachbarschaft gab es eine kleine Kneipe, da stand so ein Automat mit kandierten Erdnüsse darin. Wenn ich für meinen Vater Zigaretten holen musste, durfte ich für 10 Pfennig Erdnüsse kaufen. Die alte Wirtin gab mir dann eine Zigarrentüte für die Nüsse.
Bei uns hingen auch so ähnliche Automaten an jeder Straßenecke, war eine schöne Zeit 🤩🐢
Real good video
thank you very much!
@@ForgottenShineRestoration cu
Waduh gimana ini
I'm sure your daughters will be bugging you for some of them lol
Enjoyed your video and I gave it a Thumbs Up
oneshot_me oh yes they do, thank you
@@ForgottenShineRestoration LOL You are welcome
Gausah ngegas juga lah bang 🗿
Mesin tolol awoakwoakwko gw kesini gara gara meme
@@marcelhub_ sama AWOKAWOKAWOK 🗿
I once had a dream a good dream and what happened in the dream was I was at a gumball machine right? but when I turned the thing after placing the quarter in.. I didn't get one but two gumballs that to this day is the best dream I've ever had
the video is very cool I'm from Indonesia 👍👍👌😊😊
Thank you!
Mesin tolol
Wkwk
Coba lihat mesin tolol 😂
@@anjenggnjir7870 sekarang dah bener gak tolol lagi
와.. 진짜 너무 신기하네요...
매우 감사합니다!
Ficou muito bom o vídeo aqui no Brasil no lugar de ser chiclete e bolinha de borracha que pula que fica dentro dessa máquina kkkkk
Matheus Andre obrigado
'10 - 48' = Baujahr?
👍👍👍
😁
You do know this brand of gum machine (Acorn) is still made and all parts are available including the globe in both glass and plastic. Even the older parts and decals are readily available through numerous internet venders. Just seems like a lot of work on an item that isn’t really that old or valuable. Just saying.
Does anyone know the title of this video in English?
Did you sell it and if so for how much?
No I have not sold it 🐢
Wow! 😳😳😳 👍👍👍✅✅✅
Thank you very much!
Do you know how old this machine is?
How do you remember were the all parts go together?
If you disassemble it yourself, you usually know how to put it back together. But if two screws are left over, that's not bad either... 😅😅🐢
cool :)
Ini kenapa judulnya ngegas ajg 🤣
Very good!
Are gumball machines legally allowed to be any other colour than red? Don't think so! Haha!
Doc Moe not sure :D thank you!
Yg buat translate emosi
Pemulihan mesin "TOLOL" rusak dan berkarat
Mantap lah bro
Gua kira J2 prime
Ты ведь русский верно:0?
This is from my hood omg 😱
Can’t belive it lol
Is it possible to buy it?
What do you mean? Where are you from? I don't sell the items...🐢
@@ForgottenShineRestoration Im from Germany Frankfurt and I lived my childhood in this area (65936) and my family too !!!
On the sticker is a address
Kesini gara gara meme di ig
Yang kesini gegara meme
Which meme?
Why? What is being done there?
@@ForgottenShineRestoration bro this is the meme's link instagram.com/p/CSJuLThhjyK/?
Thank you!
@@ForgottenShineRestoration Indonesian jokes
Kral sen bizden misin türk müsün
yorumun için teşekkür ederim ama türkiyeden değilim
É a mesma da minha mãe :3 (ela tem uma igual c não entendeu . _ .)
Sheedpost enjoyers
Awokawokaowk sama
Aowkoakwkw, kebetulan aja baru liat postingannya
Yang kesini gegara meme 🗿👍
The rattle can paint job is unfortunate. Invest in a powder coater if you are serious about restoration.
Thanks for the tip, I recently bought a powder coater....
MARSELO
I'm here because of a meme🗿