That's sweet. My 87 just hit 95,000 original miles everything works on my car. I just got me a 350 turn-key crate engine. I'm a simple guy i still want that original look just a bit more juice on the pedal.
You did a fine job with the build-up and installation of the 6.0 liter LS it's time to hear /see it run ...There's so many LS engine builds /swaps out there on RUclips, you see the completed engines, but you never see the finish product placed / installed up & running in the vehicle and driven daily, so the viewer can see the final results.
I got an 350 olds in my 84 2 door cutlass I jus put a throttle body on it and I was going ls but I thought about it and changed my mind I lov the power I get out of my olds 350💪🏾💪🏾💪🏾but dont get me wrong I lov those ls swaps my friend ls swapped his 87 chevy monte carlo ss we did it in no time it's super easy I see why everybody does this swap my fathers friend did an ls swap on his 70 c10👍🏾👍🏾
Holly stuff all works but its too high for a shade tree guy like me. Guess ill still be sending cpu off to get tuned and drilling holes and labeling wires until i can afford it😅 great build and beautiful car guys
I appreciate you doing this swap want the most simple swap right at the end of my v8 swap in a 1996 jimmy wow what a hard one it was and is .....ill appreciate it more i guess
Man I need a ls swap in this cutlass 442 I found that’s clean. I could buy a new/newer car or truck and have been looking for so long but I just don’t like anything new… that isn’t 100k$ an up
Would you do a breakdown video on your swaps? Also I would like the parts list on this swap. I’m helping a friend swap his and he just wants something simple that isn’t going to break the bank to much. Thanks in advance
Absolutely one of the best videos I've seen on this thanks man do have a few questions is there a way to speak you over the phone for 5 to 10 minutes let me know thank you
@@Zero2SixtyPerformance hi how many kind of converters do you have on that car ??? Because I have a 84 Buick regal and I'm doing the same thing on it I'm putting a LS1 motor..
Great build and swap.the swap would vastly improve performance and gas mileage over the old 307,305 Chevy small blocks of the 80s era. One question what battery are you using once the swap went in? Also what axel you using?
I got a crossmember for my 1984 Monte Carlo SS from honest charlies he specializes in g-body parts a long time ago in the late 90s for a 700r4 transmission when the car had a old style 383 smallblock in 2008 the engine was swapped to a LS2 and the header collectors didn't line up with the humps in the crossmember so my mechanic cut it in half and rewelded it back together painted it and installed it its still in the car and have never had a problem with it l don't think Honest Charley sells these anymore but jegs sells one that looks identical for 128 dollars it will need to be cut and rewelded so the collectors line up with the hump on the collectors hope this helps
Maybe I'm getting old but l much prefer this Cutlass over a brand new Camaro SS like the gray color no vinyl top the only thing with these cars is the 7.5 rearend if you got a 8.5 rearend out of a 1984-1987 buick GN it comes with a much better 8.5 rearend probably could put in a Ford 8.8 out of a 1985-2004 mustang GT with the right offset wheels l think it could work it's close to the same length very nice car love G-bodies this one is sweet l am a big fan of Chevy LS engines the power reliability and durability surpasses the old style smallblock by any other manufacturers and equals the power of a bigblock in a lighter higher revving package have seen modified 6.0 and 6.2 liter engines on premium pump gas run with and many times out run modified 396 427 454. 496 502 bigblock Chevys running premium pump gas not to mention the LS will without a doubt last at least twice as long as these bigblock engines and in many cases the LS engine is giving up 20 to over 100 cubic inches to these bigblock Chevys
If you were to drop off your vehicle, you would be looking at roughly $18k installed if you wanted a swap just like this. Alternatively, you can purchase all of the items used in this swap right off our website! - zerotosixtyperformance.com/shop/ls-swap-systems/chevrolet/1978-88-gm-g-body/1978-88-gm-g-body-ls-swap-kit/
Nice bulid looks like high quality work but whats the Hp to the Rw??? Thats the main thing to all LS swaps or why even do one if yur not trying to make more power thats reliable isn't that the whole reason for a swap lol
A/c is totally separate from the engine wiring. In most applications you can use the original oil wire as they are a 12v switched wire to turn the Holley on.
What did you get that for l80 for from? And can you use a all-wheel drive transmission off a Tahoe or 4l60 for a El Camino? Would it work same thing as a Cutlass? Really nice. Really nice build. I like how clean it came out. That's exactly how I want my car to look
As far as is swap is concerned are the any tremendous differences between g body and d body. 1989 and 1981 Cadillac brougham are the vehicles specially in speaking of.
Doing frame off 85 monte ss t-top 6.0 lq4 comp 54-469-11 trickflow beehive springs pushrods trunions Johnson lifters. 4l85 fully rebuilt shift kit circle D 258 torque converter. Planning using holley engine management as well. Do you have a part number on that adapter for speedo want use factory gauges as well already have oil water volt hooked up need speedo tach eventually slow process due to financial reasons but getting there
Clean cutty! I have a 88 MONTE CARLO SS and I have the 6.0 swap but my steering knuckle hits the header looks like you have an extended one is it out of another car? Or do they sell them extended...would appreciate your help!!...thanks
That is likely due to the mounts and headers you are using. This swap used mounts and headers from Holley. 0 fitment issues. Stock steering components were used
I used NVU Gauges with a GPS Speedo and about 50% cheaper than Dakota. NVU will also custom screen print you any design for your gauges. I tried to get something custom done through Dakota and after they took my credit card info, 2 mos went by before I saw their first draft of what I requested. By that time, I already had my NVU gauges.
How much modification from a stock 307 motor exhaust install was there mating it up to the 6.0? Like did you have to make any custom piping or brackets? Which Pypes mufflers?
@@Zero2SixtyPerformance is the Holley crossmember double humped for duel exhaust like the Gforce crossmember, or is it made like the factory Gbody crossmember? Thanks for any info.
@@Zero2SixtyPerformance ahhhh i see. I heard it can be a hassle doing yourself due to figuring out which connectors you need/dont need. I also heard third party companies make harnesses that are already ready and just plug and play.
Nice swap👊 I'm getn myself familiar with LS swaps as much as I can and I see a lot of guys change out the accelerator pedal to electronic for the throttle body? Is that something that you did also or is it not necessary and is optional?
That's the best looking G body ever made. Ditch the 307 boat Anker replaced with a sweet 6.0 litre. Sweet!!! . Great job and video
Anchor
ruclips.net/video/tBrysp4jBnw/видео.html
Chevy caprice Gbody Short Bed
Outt the G body’s, I think the Regal and Cutlass are even, then Montecarlo except for SS I put that below Grand National then Grand Prix!
I love the factory gauges too
Clean build g body has came a long way...can't believe how these frames and body's match.6.0 will make that 305 ..look like a tractor motor
That's sweet. My 87 just hit 95,000 original miles everything works on my car. I just got me a 350 turn-key crate engine. I'm a simple guy i still want that original look just a bit more juice on the pedal.
Where did I pick this up
You did a fine job with the build-up and installation of the 6.0 liter LS it's time to hear /see it run ...There's so many LS engine builds /swaps out there on RUclips, you see the completed engines, but you never see the finish product placed / installed up & running in the vehicle and driven daily, so the viewer can see the final results.
Thank you. I will keep that in mind for the next video 👍
@@Zero2SixtyPerformance what engin motor mounts did you use in trying to do it for my 71 buick skylark
Never? There are thousands of videos with that exact scenario.
@@Zero2SixtyPerformance.where you located
St. Petersburg, Fl
I think it’s so cool that you answered many questions even some of the same ones multiple times !!!!
Beautiful car. Thanks for sharin the knowledge and keepin the G bodies rollin. 💪🇺🇸🦅
Got a 1986 GMC caballero that I would love to do. It still has the stock 305 motor . I know that’s unheard of these days 😮
Great video, please start that thing up so we can hear it next time. Nice Job!
We just added a start up video! Check it out ruclips.net/video/2UDRF8XYjEk/видео.html
@@Zero2SixtyPerformance I need a parts List I just got me a cutlass an I really want to do it myself I just need to want ever part I need
@@princesharkboi5378 shoot me an email, I will put a package together for you. David@zerotosixtyperformance.com
Some lowriders in the 90's had the wheels painted like that, it's a nice look.
Considering an Ls swap on 82 el Camino, thanks for the video!
I have own and loved the G bodies for over 30 years. I am telling you that is one of the baddest street g bodies I have seen.
Thank you 👍
Those replica Olds factory rally wheels are super nice, they look really good on the car. 😎
I think so too!
Really nice. So cool for you to share all your hard work.
I have an 84 cutlass supreme brougham on that I'll be doing the same thing on.
Wow. That's a really good looking Cutlass..... Nicest I've seen in a long long time.
Thank you for sharing! Soon as I saw the 442 I immediately subscribed! I am wanting to ls swap my 1984 Hurst Olds.
If you have any questions regarding the swap feel free to ask!
@@Zero2SixtyPerformance Thank you I definitely will.
Keep the original motor.....
They only made 3000? Maybe 3500....
Something like that.
I would love to do that to my 80 trans am, but It is beyond my financial powers. Great video.
Thank you! Well if you ever decide to take on the project yourself don’t hesitate to ask us for help!
@@Zero2SixtyPerformance thank you, I am not far from you, I can walk to your shop.
Love the Gbody Ls swaps
I got an 350 olds in my 84 2 door cutlass I jus put a throttle body on it and I was going ls but I thought about it and changed my mind I lov the power I get out of my olds 350💪🏾💪🏾💪🏾but dont get me wrong I lov those ls swaps my friend ls swapped his 87 chevy monte carlo ss we did it in no time it's super easy I see why everybody does this swap my fathers friend did an ls swap on his 70 c10👍🏾👍🏾
Idk how old this is but I really like the info u went into and how far u went with it
you inspired me to take my 83 delta 88 coupe and ls swap it, awesome work!
Heck yeh! Thank you! If you need any help feel free to reach out.
Heck yeh! Thank you! If you need any help feel free to reach out.
@@Zero2SixtyPerformance will do! especially if you kit will fill in most of the gaps in a B-Body GM
You gotta have the ac hooked up man
Everybody was waiting for you to start it
I need to hear it start ! Got to hear this beast
My ls3 swap deff easy with the parts
Fresh ... Thanks for the informative information.
Would sure like to do this or have a cutlass all done. Its amazing... Turn key...
Great build, David!
🤗😳 I have the same year and going the same route👍🏽
Love it !!!
Great video
Holly stuff all works but its too high for a shade tree guy like me. Guess ill still be sending cpu off to get tuned and drilling holes and labeling wires until i can afford it😅 great build and beautiful car guys
Same
Aint nothin' wrong with that guys!
Quite a commercial for Holley… lol
I appreciate you doing this swap want the most simple swap right at the end of my v8 swap in a 1996 jimmy wow what a hard one it was and is
.....ill appreciate it more i guess
Man I need a ls swap in this cutlass 442 I found that’s clean. I could buy a new/newer car or truck and have been looking for so long but I just don’t like anything new… that isn’t 100k$ an up
Would you do a breakdown video on your swaps? Also I would like the parts list on this swap. I’m helping a friend swap his and he just wants something simple that isn’t going to break the bank to much. Thanks in advance
What all would you like us to break down? Shoot me an email and I can get you a parts list. david@zerotosixtyperformance.com
@@Zero2SixtyPerformance That's seriously awesome of you, I wouldn't have actually expected a response. Fantastic job on this too!
Asome video boss I'm looking into doing this swap on my 84 cuttles supreme
Nice swap
Great info.
clean setup
Absolutely one of the best videos I've seen on this thanks man do have a few questions is there a way to speak you over the phone for 5 to 10 minutes let me know thank you
727-346-8919
@@Zero2SixtyPerformance hi how many kind of converters do you have on that car ??? Because I have a 84 Buick regal and I'm doing the same thing on it I'm putting a LS1 motor..
Catalytic converters? None.
Nice install. Are you going to make a video of it running and driving?
Customer picked up the vehicle. We can certainly do a running and driving on the next one!
Need to do the jeep Cherokee steering shaft
Would've been nice to hear it, but great video.. Thx
I have a 83' Buick regal i want to ls swap so im savin this
I just want cheap n reliable ls swap. I mean it came with 100 donkeys. I think 300+ hp should be fun in ole june.
Great build and swap.the swap would vastly improve performance and gas mileage over the old 307,305 Chevy small blocks of the 80s era.
One question what battery are you using once the swap went in?
Also what axel you using?
I belive that car had an optima red top in it. Rear end was the stock 442 unit.
@@Zero2SixtyPerformance how much u charge to do the swap
What are the rims and tire size that you have on this car? They are sick!! Please let me know!
Would the parts list be similar for a 77 Cutlass? Subscribed I want to see more of this beautiful car!!
There would be a few items that are the same but you have an A body so it would be a little different
Great video! I'm in the midst of doing a 6.0/4L80E swap on a 79 Chevy Malibu Classic 2 door! Wondering about the trans crossmember? Help?
I got a crossmember for my 1984 Monte Carlo SS from honest charlies he specializes in g-body parts a long time ago in the late 90s for a 700r4 transmission when the car had a old style 383 smallblock in 2008 the engine was swapped to a LS2 and the header collectors didn't line up with the humps in the crossmember so my mechanic cut it in half and rewelded it back together painted it and installed it its still in the car and have never had a problem with it l don't think Honest Charley sells these anymore but jegs sells one that looks identical for 128 dollars it will need to be cut and rewelded so the collectors line up with the hump on the collectors hope this helps
Thanks! I appreciate the info
Dope set up
Could not agree more
Cool like that
Maybe I'm getting old but l much prefer this Cutlass over a brand new Camaro SS like the gray color no vinyl top the only thing with these cars is the 7.5 rearend if you got a 8.5 rearend out of a 1984-1987 buick GN it comes with a much better 8.5 rearend probably could put in a Ford 8.8 out of a 1985-2004 mustang GT with the right offset wheels l think it could work it's close to the same length very nice car love G-bodies this one is sweet l am a big fan of Chevy LS engines the power reliability and durability surpasses the old style smallblock by any other manufacturers and equals the power of a bigblock in a lighter higher revving package have seen modified 6.0 and 6.2 liter engines on premium pump gas run with and many times out run modified 396 427 454. 496 502 bigblock Chevys running premium pump gas not to mention the LS will without a doubt last at least twice as long as these bigblock engines and in many cases the LS engine is giving up 20 to over 100 cubic inches to these bigblock Chevys
Just an FYI the 442 Cutlasses actually came with 8.5 rear.
How much would this be to get mine done I have an 1988 cutlass and this is exactly what I want, great job
If you were to drop off your vehicle, you would be looking at roughly $18k installed if you wanted a swap just like this. Alternatively, you can purchase all of the items used in this swap right off our website! - zerotosixtyperformance.com/shop/ls-swap-systems/chevrolet/1978-88-gm-g-body/1978-88-gm-g-body-ls-swap-kit/
Nice bulid looks like high quality work but whats the Hp to the Rw??? Thats the main thing to all LS swaps or why even do one if yur not trying to make more power thats reliable isn't that the whole reason for a swap lol
Hey, I have a 70 Nova thinking about a swap, I’d like to gather up all the parts first before I dive in my concern in fuel systems what’s needed
Easy. We can hook you up with everything that’s needed. Shoot me an email. David@zerotosixtyperformance.com
I'm wanting to do the same thing to my 82 el camino.
I personally own a 82 el camino.. I say go for it!
Super clean. I have same intake and tb on s10 swap, did you ever drill or make 1 where that crankcase breather can go through factory 3 bolt tb?
I have not… I would just get vacuum from another source. Typically I would would a 3/8 bung in the intake tube.
Ty sir meeded this
I like the cold air intake did you make or purchased it
We fabricated it
All I want to know is how you used your factory engine bay wires for the a/c and what goes to what? Lol
A/c is totally separate from the engine wiring. In most applications you can use the original oil wire as they are a 12v switched wire to turn the Holley on.
Beautiful
Nice video
What did you get that for l80 for from? And can you use a all-wheel drive transmission off a Tahoe or 4l60 for a El Camino? Would it work same thing as a Cutlass? Really nice. Really nice build. I like how clean it came out. That's exactly how I want my car to look
Rwd 2500 truck. Awd would not work without changing the tail shaft. 4l60 fits in Any g body
Nice build! How can i want to Ls swap my Monte Carlo, can i get a list of the parts you used?
Did you use a Holley in tank pump? And if so how did you get the level sensor to work with stock gauges?
Yea we did. The sender is a 0-90ohm just like the factory
Hi, im doing an LS swap this winter and was wondering if you could shoot me a parts list. Thanks in advance!
It’s in the description
Thank you . How much do you charge just labor?
All cars are different but anywhere from $7-10k
As far as is swap is concerned are the any tremendous differences between g body and d body. 1989 and 1981 Cadillac brougham are the vehicles specially in speaking of.
They are not the same at all. But, it's just another swap. Get some mounts, pan and accessory drive. Make it all work.
Nice job, it looks clean. What's the cost on a swap into a third gen F body?
Roughly $21k installed
Doing frame off 85 monte ss t-top 6.0 lq4 comp 54-469-11 trickflow beehive springs pushrods trunions
Johnson lifters. 4l85 fully rebuilt shift kit circle D 258 torque converter. Planning using holley engine management as well. Do you have a part number on that adapter for speedo want use factory gauges as well already have oil water volt hooked up need speedo tach eventually slow process due to financial reasons but getting there
ECD-200BT-2
How was the clearance of the passenger side with the heater box. Any issues with having to relocate the coil?
It fits. It’s tight but you can fit the coil and plug wire
Can you do a motor swap from a Z06 into a g body cutlass?
Sure can!
Is it fast ? Drive it.
Hi I was wondering do you sell turn key motors like this one
Yes we do. Shoot us an email david@zerotosixtyperformance.com
Can you share what air intake that is feeding into the tbss? I have the same set up.
We made it
You were able to use a 4L80E without modifying the shifter or the original trans tunnel?
Yes and yes
This dudes whole family's name is Holly... holly shit 😂
What’s the story on the Wagoneer in the background? Is that a LS swap as well?
Yes it was a swap. We have a build overview video on our channel, check it out!
Clean cutty! I have a 88 MONTE CARLO SS and I have the 6.0 swap but my steering knuckle hits the header looks like you have an extended one is it out of another car? Or do they sell them extended...would appreciate your help!!...thanks
That is likely due to the mounts and headers you are using. This swap used mounts and headers from Holley. 0 fitment issues. Stock steering components were used
Great build Im considering LS Swap on my 1980 442 W-30. Where are you located?
St.Petersburg, FL
how about the drive shaft? did you make a custom made one or can you use something else?
We made a new shaft
I wanna do the same thing to mine where do I purchase this kit I wanna keep all my gages original just like yours I got the 6.0 and a 4l80
bro what drive shaft did you use and did you have to cut it?
A new shaft with a 4l80 yoke.
@@Zero2SixtyPerformancethanks my guy 🫡💯
Did you ever get that part list i would to try this build in my garage myself
zerotosixtyperformance.com/shop/ls-swap-systems/chevrolet/1978-88-gm-g-body/g-body-ls-swap-kit-part-number-list/
I am doing a swap on a 83 Monty G-BODY! We’re did you get your motor mounts from?
Holley
I used NVU Gauges with a GPS Speedo and about 50% cheaper than Dakota. NVU will also custom screen print you any design for your gauges. I tried to get something custom done through Dakota and after they took my credit card info, 2 mos went by before I saw their first draft of what I requested. By that time, I already had my NVU gauges.
There are many was to skin a cat as they say. We have had great success with the Dakota stuff so we stick by it and they stick by us.
What was your top end specs. Cam, heads, springs. Also who did your ecu.
Motor was an LQ9 pullout. We re gasketed the engine and installed a Summit stage 1 hi lift truck cam. We do all the install/tuning in house.
Great info. Nice install. The Escalade and corvette engines will have to run on premium gas?
Not necessarily. It really comes down to the tune. We have plenty of customers with engines tuned on 89.
@@Zero2SixtyPerformance thanks. Thinking about doing a 73 century with LS swap.
Are those stock rims because I know they sell aftermarket ones that are 17 inch and 18 inch and look the same
17" aftermarket
look like year one 17's
How much modification from a stock 307 motor exhaust install was there mating it up to the 6.0? Like did you have to make any custom piping or brackets? Which Pypes mufflers?
You have to make a 12” extension to the headers/manifolds. The exhaust mounts just like the factory exhaust did. Pypes Street Pro mufflers
I appreciate it so do you sale the package yourself?
Yes we do. Shoot me an email and we can get you set up. David@zerotosixtyperformance.com
Do you guys make a crossmember for a 4 L 80 on G body
We used the Holley crossmember in this project
@@Zero2SixtyPerformance is the Holley crossmember double humped for duel exhaust like the Gforce crossmember, or is it made like the factory Gbody crossmember? Thanks for any info.
@@hidinfrombiden6251 yes it has cutouts for dual exhaust
@@Zero2SixtyPerformance thanks🤘
so I m looking for the right kit do you remember how much the holley high mount kit cost so I m finding the right kit thanks
Roughly $1400
What do you typically charge for labor to install a 6.0 using this kit and a 4L65E in a currently V8 Gbody? Thanks for this awesome video.
Roughly 8k on a complete swap
@@Zero2SixtyPerformance is that everything including labor
@The Ames Compound Productions That is just labor. If you were to replicate this swap it would be roughly $21k
@@Zero2SixtyPerformance ok
Did you have to cut the trans tunnel to get the 4L80 to fit in there?
Do not have to cut the tunnel
Did y'all go with rewiring the engine harnesses and connectors yourselves or go with a company that makes ls swap to gbody wire harnesses?
We do all the wiring in house
@@Zero2SixtyPerformance ahhhh i see. I heard it can be a hassle doing yourself due to figuring out which connectors you need/dont need. I also heard third party companies make harnesses that are already ready and just plug and play.
The parts list link is no longer available do u still have it and if so can u link it again
The link works again. We had an issue with the website.
What’s up buddy I like the way you did that LS swap I’m doing one on my 86 Regal where can I get a radiator like that and is it 3 or 2 row?
2 row. We can send you one. Shoot me an email david@zerotosixtyperformance.com
Where do I find the parts list you mentioned you were putting together? Would love a copy of it for myself. Thanks
We have a kit available to purchase of the our website. I did not make a list of everything but I could it that would help people
Nice swap👊 I'm getn myself familiar with LS swaps as much as I can and I see a lot of guys change out the accelerator pedal to electronic for the throttle body? Is that something that you did also or is it not necessary and is optional?
We actually used a cable throttle body on this car. It's not necessary to switch on any swap.