Get it contact with me and/or support me directly via my Tazet profile: tazet.com/foureyes I know many of you are waiting for the boosted Mustang video and I’m in the middle of installing the centrifugal now (yes we’ll still turbo it). The format of the boosted Mustang video will mirror this one: install process > tune > race. Let me know if there’s anything else you’d like me to cover and/or do during that video. And as mentioned above, if you have any questions for me or want to support me directly, check out my Tazet profile. These videos are expensive in both time and money, so every little bit helps more than you would think and of course is extremely appreciated. 🙏
Why didn't you add 1.7 rockers? Using the stock rockers is leaving power on the table. I sell Gen 3 rockers which are basically plug&play which should gain you about 20 RWHP. Maybe for another vid? And for Godsake, get some better tires. 888Rs!!
@@Shawncombat yt isnt really a app so its pre installed through safari etc for any phone computer whatever but the "app" is not what you download is js like a shortcut too the website js shown in a different way
I think the only thing that could/should have been added that not only does timing it wrong reduce overall power, but can cause damage. I had a 97 Trans Am which was notorious for breaking ring lands if you had detonation due to timing or being too lean. And yes, unfortunately I did it one day. I'd switched from race gas back to pump gas but forgot to adjust my blower (ignition) timing module back.
Empty new houses make great filming studios/shop spaces, plus cheaper than commercial real estate. If you don't do service or walk-ins, perfect for custom build work. 🍻
...but not able to give us an important piece of data: the aerodynamic drag coefficient of the R10 and the Viper respectively. Important data cause the 2 cars have similar power , Viper having more torque lighter by 200 lbs but have less traction.
You know what I like about this channel? The fact that this is a realistic channel. You have a few vehicles you like, your building them slowly and thinking about the steps thoroughly. This isn't some "look at how much money I have" channel like every other YT channel even though you obviously, most likely, probably make more than the average person. But I can relate to these builds. And i like projects that evolve.
I'm with you on the "throw a bunch of money at a car" channels. It's neat to see someone build something in a couple days because they have enough money to buy everything they need but it's not relatable at all. Most of us are spending months minimum on a build.
Yes, even though I'm a teen, I understand this. I'm building a racing lawn mower from scratch , and it's taken about 2 years now, and it's not even done yet. And the parts cost money ofc, and the troubleshooting ends up costing money too.
@@GLblitzer if you even look at the gas pedal wrong in that car, especially in suboptimal conditions, it's going sideways. And you DONT have to be even revving high, it makes so much torque that you can end up going sideways just by giving it a little too much throttle at 2000 rpm.
Right? All motor and just rear wheel drive it has no business to be anywhere near the R8, yet there it is all up in its face spitting venom. Seriously though that is a great combo of parts and a job well done. A propper car tuner level of work good work boys.The viper platform is hands down King of high level freeway racing. There be some monster snakes out there my lads.
@@Corbots80 You are comparing a 2000 viper to a 2017 R8 that is 17 years of technology enhancement. The saying "there is no replacement for displacement" is perfect here. The viper if upgraded to modern specifications (not saying it should be) would smoke the Audi.
That resonator was a good move. It didn’t sound bad before but it definitely sounds a lot better now. I’m a firm believer that everyone should have a resonator of some kind in their exhaust setup.
@@phantomflame0658 absolutely! Their biggest advantage is they also can damper drone pretty significantly which if you want to daily your car, it’s a must have. At some point when I get a downpipe for my car, i’m buying a resonator with it so I can keep my exhaust at a reasonable tone.
Maybe if you go catless but if you have only a cat-back exhaust then you've got to go non-resonated. Resonated cat-backs sound barely different from stock exhaust systems.
Between the coherent concise explanation of all things in this video, to the chapters detailing specific events. You are making some fantastic content man, you're one of the only youtubers I actually have post notifications turned on for.
Your videos are perfection. Everything broken down so clearly and methodically. It’s absolutely amazing how strong the GTS is. My buddy’s 02 stock GTS kept up pretty well with my 509 whp 08 C6 Z06. Excited to see him follow in your footsteps here soon. Really curious what the 60-130 was on that. I bet it’d surprise the heck out of people today. Thank you for sharing your Viper journey!
@ Absolutely! Thanks for asking! Nothing crazy for now. Cold air intake, Kooks headers with high flow cats, Borla ATAK and a tune. Debating building it vs selling and going up to a C6 ZR1. But there’s just something wonderful about N/A.
Love this channel, doesn't make sense... 265k subs.. drops 5 videos a year. No naked women, no fights, no drama, no fake giveaways, thanks for being you!
@@DCB1209 I think it has to do with the way he nails the educational bits and the exciting bits at the same time. I had a vague understanding of ignition timing before this, but I feel like he really clarified things well in this video, and then the dyno bit was really well done, and then you get an awesome drag race for dessert. All his videos consistently deliver even if they are spread out, you don't want to miss the next one.
I can't explain how awesome this video is. You show and explain so many intricate things that many other channels do over dozens of videos, in 16 minutes. Amazing.
As much as I'd love a weekly post/monthly post, the amount of knowledge and information you put into your videos is definitely a reason to come back every time! I've re-watched The 3v build more than 5x. Absolutely loving the content!
This is the best video about car, engine... on youtube. No unnecessary talk camera shots just straight ahead to the point, no time waisting. Thank you Sir.
Such an underrated channel this is as good as it gets, so informative too! I feel it was selfish to let this masterpiece go unseen, so I will have no choice but to send to everyone I know, gramma better watch this
Whenever I hear 8L V-10, I know exactly what car we're talking about. I came here just to say that. It's a synonym for Viper - my fav car as a kid. Yes, I had 1/16 models - a black R/T10 and a blue GTS with white stripes. One of the best looking/sounding cars ever. Respect to the turn-of-the-century Viper!
The run-through of the power gains from different stages on the dyno chart was truly the best I've seen. Walkthrough explanations, visuals, and doing the math for us was just perfect!
The reason the Audi did so well from a dig is because when it's in launch control mode with traction off and in dynamic mode the transmission goes into Amax mode where shifts are incredibly fast and slip with upshift engagement to cause some forward momentum. Amazing video guys love all the quickness and not boring us with too many details!
@@Four_EyesI found that in my Audi A6 which has a torque converter and my friends RS5 which has a DCT the shifts in dynamic are more violent, but they still have feel like they buffer a little on both cars when shifting just to keep things feeling smooth while driving, switching to the paddles in both cars makes the shifts very violent and shifts faster with zero buffer even with the torque converter in my car, likely why when Dustin switched to the paddles in the rolls the R8 performed a lot better.
Dude I LOVE your videos of your Mustang and Viper!! They are so well-edited and everything is simply explained and easy to understand! Not to mention how CLEAN your builds are how they're not overly excessive! This has got to be one of, if not my favourite car channel on RUclips!
Sounds freaking mint with the resonators. It bums me out when people remove them thinking they cause a restriction and end up making their car sound awful.
I've been watching your Viper for some time. You really know your stuff, and your mechanical skills are impressive. I noticed the timing chain lacks the tensioners, which seem so common today. Your Viper does really impress me, as do your driving skills. Great video.
I've always been a huge Viper fan, GTS particularly. I also love that you're very intelligent and informative throughout the whole process. Thank you for your fantastic content and I can't wait to see where this car ends up. Great work!
MY GUY! 4 long months I've awaited your valiant return. The content you provide is second to none and I'm NOT GLAZING. You'll blow up soon man, keep it up.
You honestly might be the best RUclipsr in my opinion. You spend a lot of time and effort into your videos and it shows. Your videos keep me entertained like my child watching those fruits dancing😂. It almost gives a nostalgic feeling, like watching all late 2000s early10s car tv shows when I was a kid with more retainable information. Thank you, I hope to get to build cars like yours someday. Have a good one!
I love the total unbiased video thats literally specifically about proper power adders and i love how you build the video man. First 10+ min videos that i actually enjoy haha
i've never seen your content, but HFS, you didn't lose me for one ADD second with the outstanding pacing and editing! Love the speedrun details of tear down/reassemble. familiar with every piece of the process, but don't need the minutiae to be entertained. well done!
I'm in!!! first time watcher, and this is what I'm here for.. thanks for posting a on topic, factual and non nonscense video on the in's and out's of engine tuning. this is the way! thanks!
Mopar/Viper guy here. Awesome video as usual, I thought the Viper did really well against the Audi considering all the advantages it had. Back in the day, there were a few guys in the Viper scene that achieved 600-650++ whp naturally aspirated so it's certainly possible with the right setup and tune. A personal friend of mine drag raced a '99 RT-10 for a number of years that actually had the engine built by Lingenfelter after leaving Hennessey. It was a super high compression (14.5:1) 545CID that put out somewhere around 850-900 HP and ran a best 1/4 time of 9.43@150+. Pretty cool what the Gen2 engines are still capable of!
Videos keeps getting better, i really like the animations of the cylinders, which are also really well made. Also he managed to explain valve timing tune better than anybody with that analogy. They are really entertaining to see, and i talk as one which never ever changed oil even on a scooter.
Great video. The editing and pace are really good with no boring bits. That Viper is a locomotive. Look at the power and torque graphs and see all the area beneath the curves. That's high-bandwidth performance. Also, it's 100 percent duty cycle performance on pump 91.
Bro holy shit can you please record and edit every car RUclipsrs videos from now on?!😭🙌🏽 This entire episode (at this point, it deserves that title) was absolutely amazing! So informative, concise, quality footage, well explained, and didn’t skip a single BEAT with a bunch of random talking and vlogging!!🔥🔥🔥🔥 Don’t own either car nor does it benefit me in any way but I’m subscribing!👍
This video was top tier man. I actually learned a lot and enjoyed watching this from start to finish. Packed all that hard work into a 16 minute video, respect. Great commentator too. Thank you.
The way you film and talk about installing everything, is single handedly why i just subbed, fucking amazing my dude. Makes working on cars or watching work being done so much more pleasurable 🤙
8:15 I wish you could have seen my reaction bud. My eye brows raised and I experienced an eargasm. And then I couldn’t find the like button fast enough.
Dude, good driving. To handle a Viper with no traction control has got to be one of the hardest cars to launch. That low end torque is *unusual* and is a fucking beast to manage. Well done man. Even Carroll Shelby had good things to say about the Viper. Baddassest cars for sure
Dude, what a wonderful video. You are the one who deserves to have the car you have because it is like a talented guitarist tuning his guitar perfectly. Take good care of that Viper.
6:13 Minor mistake made here, but it's a very simple thing to mend that helps a lot when doing future oil changes. ALWAYS lubricate the oil filter gasket with some new oil, if you don't then the gasket will basically fuze to the mating surface. A lubed gasket will still seal fine if properly tightened, while still allowing for some movement whenever you go to remove the old filter. A dry gasket will remain still, as you struggle to untighten the filter with the gasket not moving at all. (Source: 4+ years of experience changing oil on cars for work)
I should also add, while this is probably a trivial thing to most people it is a very simple step to take to save yourself from future struggle when doing regular maintenance on your car. Ask any old gear-head if you should lube the oil filter gasket, they will all give you the same answer (unless they are incompetent)
AFR's effect how quickly a charge burns so is probably why he dialled in the lambda first then timing. And if I remember correctly you want peak cylinder pressure to occur 15⁰ after TDC on the power stroke to achieve maximum mechanical advantage. This is the first video of yours I watched and immediately subscribed, it was awesome. No faff. No drama. Clear and concise. Can't wait to see what other gems you've got
Now this is a grown-man video...! No pointless jokes and all realll assss Information that's hella realistic with facts!! This video style is a 10/10 for me homie!
Very well put together video. Fast speaking and quick tear down and install and strait to the point. Was impressed with the torque that cae puts down!! Nice work.
@@Four_Eyes Sounds like they're gonna send you something, but since I saw this: torque wrenches are for tightening, not loosening. For loosening, an impact wrench (or, on the cheap or in tight spaces, a breaker bar) is the right tool for the job. I suspect Torque Test Channel will recommend a Milwaukee Fuel 1/2" drive impact wrench. Using a torque wrench as a breaker bar risks compromising its accuracy for the job it's meant for.
@Four_Eyes agreed. It's probably fine what you have to tightening to a spec. But pull of a trigger to remove something like that saves a lot of fuss. Shoot us an address torquetestchannel@gmail.com
instant sub after u explaining so much in the very easy understanding, pls i need more of this bc i wanna do what u do someday, this has taught me even more of what ill need to know, the editing is incredible too
Makes me happy knowing the exhaust video was from 2 years ago because it means this man is just one of us. Saving money to be able to afford these parts like everyone else and not just get sponsor money. Great video and an amazing build keep it man
When I was in auto tech school, they had a prototype V10 from Dodge. Yes, that V10. It was one of the engine from the prototyping phase of the Viper V10. It had a cast iron block & aluminum heads, IIRC. It was an entire engine from intake to oil pan. During our "engine - machanical" phase, the instructor said if I could take it all apart and get it back together using the proper torque specs & checking clearances of everything and it turns over easily, I'd get an A for that part of the class. Using the standard V10 specs for a cast iron block and the specs for assembling the aluminum heads from a viper, it all went together fine. No issues and no parts left over lol. I even got extra points when I put the GM 2.5L Iron Duke back together that some young guys took apart and never finished assembling. Tbh, I don't think they ever really started lol. That was a fun time. I'm the only person that was allowed out in the shop unsupervised. I was also 10 yrs older than everyone else and had that much more experience & knowledge. I was only there for technical reasons. I knew more than enough to work as a tech but no one would hire me because I didn't have any professional training. So I went there and got a technical diploma. I learned a few things but I knew a majority of the stuff they taught. So I was going for the paper saying Ive had real training by a recognized school & organization.
well ya see when you gain a tiny bit of muscle mass in your arms and learn not to yeet the steering wheel into oblivion overcorrecting going over an uneven patch of road its quite easy.
If you are not in the financial market right now, you are making a huge mistake. I understand that it could be due to ignorance, but if you want to make your money work for you...prevent inflation
A lot of people still make massive profit from the crypto market, all you really need is a relevant information and some < professional advice. ‹ it's totally inappropriate for investors to hang on while suffering from dip during significant
Oh my god, a viper being my favorite car of all time, that shot of the viper in the sunset at about 15 min 20 seconds literally almost brought a tear to my eye. Lmao it was just so perfect on my soul
Really cool breakdown. I didn't NEED the tutorials about valve and ignition timing, but the graphic visualizations were superbly done and it's always fun to watch those.
Get it contact with me and/or support me directly via my Tazet profile:
tazet.com/foureyes
I know many of you are waiting for the boosted Mustang video and I’m in the middle of installing the centrifugal now (yes we’ll still turbo it). The format of the boosted Mustang video will mirror this one: install process > tune > race. Let me know if there’s anything else you’d like me to cover and/or do during that video.
And as mentioned above, if you have any questions for me or want to support me directly, check out my Tazet profile. These videos are expensive in both time and money, so every little bit helps more than you would think and of course is extremely appreciated. 🙏
i love your sponge bob clip as well as everething new you added soon ill give ya a call on tazet😉
I would like to see the pro or centrifugal supercharged mustang defeat a hellcat ( of any kind) Edit:like if you want to see this
Why didn't you add 1.7 rockers? Using the stock rockers is leaving power on the table. I sell Gen 3 rockers which are basically plug&play which should gain you about 20 RWHP. Maybe for another vid? And for Godsake, get some better tires. 888Rs!!
I would suggest a flex fuel for next upgrade. Should prevent detonations and run cleaner.
what kind of gas mileage though? i'm serious.
bro drops a masterpiece once a millennium!
Takes alot of money
@@sfielding10001 understatement of the century
@@sfielding10001 and some time too!!
fr
Definitely worth the wait.
This is the shit I installed RUclips for
What device did you buy that did not have youtube pre-installed?
@@Shawncombat iphone, ipad, they don't have it pre-installed, do they?
@@robotbro7187 My iphone has it but they may not now idk
@@Shawncombatshut up nerd
@@Shawncombat yt isnt really a app so its pre installed through safari etc for any phone computer whatever but the "app" is not what you download is js like a shortcut too the website js shown in a different way
That swing analogy could not be more perfect for ignition timing great video
I think the only thing that could/should have been added that not only does timing it wrong reduce overall power, but can cause damage. I had a 97 Trans Am which was notorious for breaking ring lands if you had detonation due to timing or being too lean. And yes, unfortunately I did it one day. I'd switched from race gas back to pump gas but forgot to adjust my blower (ignition) timing module back.
bro's got the priorities straight. super sleek and clean garage with an empty house with no furniture but rather full of car parts and a bike
What I want as my housing furniture 😂 atleast a dining table tho
Proper priorities!
Was just gonna say that. His living room is just full of parts 😂
Empty new houses make great filming studios/shop spaces, plus cheaper than commercial real estate. If you don't do service or walk-ins, perfect for custom build work. 🍻
@@failgguntil your hoa full of Karen’s bitch for days…. Don’t ask me how I know….
BABE WAKE UP 4 EYES POSTED
HE FINALLY POSTED
ahaja yes
I was hoping someone said this In the comment haha
Ong bro
He recovered his password!
Wish more people did videos like this - No trash talk just pure objective information.
👏
Really refreshing having a car youtuber explain the technical fundamentals of the mods they are doing with a visual explanation. Subscribed!
Making yT great again!
Like how he inappropriately uses a torque wrench to break a bolt!
For real
...but not able to give us an important piece of data: the aerodynamic drag coefficient of the R10 and the Viper respectively. Important data cause the 2 cars have similar power , Viper having more torque lighter by 200 lbs but have less traction.
It's very refreshing to see a video like this instead of just a vlog style video 30-45 minutes long that was cut down from like, 5 hours of filming.
Prime example of quality over quantity. Best car channel in existence and it's not even close.
That’s simply not true
It's great. But it's not the best, and that's okay.
@@Southghost5997then who?
Okay yeah I definitely exaggerated the claim. I've still have yet to find another car channel I like more though.
@@joshmanis9860 who is then?
When talking about pure quality of videos online, specifically here on RUclips, this is a 10/10.
You know what I like about this channel? The fact that this is a realistic channel. You have a few vehicles you like, your building them slowly and thinking about the steps thoroughly. This isn't some "look at how much money I have" channel like every other YT channel even though you obviously, most likely, probably make more than the average person.
But I can relate to these builds. And i like projects that evolve.
I'm with you on the "throw a bunch of money at a car" channels. It's neat to see someone build something in a couple days because they have enough money to buy everything they need but it's not relatable at all. Most of us are spending months minimum on a build.
Spot on.
Even so I would like to know what 4eyes does for a living, so I can adjust my career choices. :D
@@w1NdiK I'm going to guess and say engineering.
Yes, even though I'm a teen, I understand this. I'm building a racing lawn mower from scratch , and it's taken about 2 years now, and it's not even done yet. And the parts cost money ofc, and the troubleshooting ends up costing money too.
This car looks like a dream. Solid metal parts , naturally aspirated , simple components without over engineering , good times have passed
Just remember it’s rear wheel and one needs to be very very extra super duper careful.
Why does rwd mean he has to be careful?
@@GLblitzer Too much power for 2 rear wheels to handle. Can spin out oh so easily. ruclips.net/video/SIY8tkbsHe8/видео.html
Zr😊w2ZEZ@@jimdevlin4949
@@GLblitzer if you even look at the gas pedal wrong in that car, especially in suboptimal conditions, it's going sideways. And you DONT have to be even revving high, it makes so much torque that you can end up going sideways just by giving it a little too much throttle at 2000 rpm.
Who ever put 2 30second unskippable ads here 8:05 , I hope both sides of your pillow is warm on both sides every time you sleep.
Damn bro, even devil didn't go that far
15:16 the moment the Viper reaches equal speed to the R8, somehow feels magical, it’s so satisfying to watch
Right? All motor and just rear wheel drive it has no business to be anywhere near the R8, yet there it is all up in its face spitting venom. Seriously though that is a great combo of parts and a job well done. A propper car tuner level of work good work boys.The viper platform is hands down King of high level freeway racing. There be some monster snakes out there my lads.
@@KGisthenamemanDang, that was poetry! 🎉🎉🎉
Absolutely pathetic. 8liter engine and it takes this much. Just to over take an R8 in a straight line
@@Corbots80 You are comparing a 2000 viper to a 2017 R8 that is 17 years of technology enhancement. The saying "there is no replacement for displacement" is perfect here. The viper if upgraded to modern specifications (not saying it should be) would smoke the Audi.
@@MrZerk815na the concept of the vipers engine is Like from the 60s 😂😂
That resonator was a good move. It didn’t sound bad before but it definitely sounds a lot better now. I’m a firm believer that everyone should have a resonator of some kind in their exhaust setup.
A lot of performance shops swear by straight through resonated mufflers. They clean up all the nastiness yet let the engine breathe
@@phantomflame0658 absolutely! Their biggest advantage is they also can damper drone pretty significantly which if you want to daily your car, it’s a must have. At some point when I get a downpipe for my car, i’m buying a resonator with it so I can keep my exhaust at a reasonable tone.
@@phantomflame0658yeah I have a straight through resonator and muffler on my honda and it’s managed to get rid of the raspiness that most hondas have
Nah. I’m straight piped with arh headers and my z06 sounds unworldly. He should’ve removed everything instead of adding more
Maybe if you go catless but if you have only a cat-back exhaust then you've got to go non-resonated. Resonated cat-backs sound barely different from stock exhaust systems.
Between the coherent concise explanation of all things in this video, to the chapters detailing specific events. You are making some fantastic content man, you're one of the only youtubers I actually have post notifications turned on for.
7:07 I didn't expect it to get to this level of shiny & reflective wow
I feel like I should've expected you to be waiting for his videos as well lol
V10 in the yugo? :D
Put a turbo on the yugo whenever the money allows it lol
Jamesskii I did not expect you to be here
@@ZoMTDUyeah I haven’t watched him in a while
My favorite channel on RUclips strikes again
Amen!! Sometimes I watch other videos I have already watched to feel like its a new video.
@@jacobpurvis1482 haha do the same thing man great minds think alike
heck yeah
lemme put you on. www.youtube.com/@jackpockets
Your videos are perfection. Everything broken down so clearly and methodically. It’s absolutely amazing how strong the GTS is. My buddy’s 02 stock GTS kept up pretty well with my 509 whp 08 C6 Z06. Excited to see him follow in your footsteps here soon. Really curious what the 60-130 was on that. I bet it’d surprise the heck out of people today. Thank you for sharing your Viper journey!
Thank you, appreciate the kind words and you watching the video. What's all done to your Z?
@ Absolutely! Thanks for asking! Nothing crazy for now. Cold air intake, Kooks headers with high flow cats, Borla ATAK and a tune. Debating building it vs selling and going up to a C6 ZR1. But there’s just something wonderful about N/A.
Love this channel, doesn't make sense... 265k subs.. drops 5 videos a year. No naked women, no fights, no drama, no fake giveaways, thanks for being you!
272k 3 days later!
Yep! 30ish videos and a quarter million subscribers. Whatever the algorithm is FourEyes has found it!
@@DCB1209especially for such in depth specific car content
Thank you for making a great car video. So refreshing
@@DCB1209 I think it has to do with the way he nails the educational bits and the exciting bits at the same time. I had a vague understanding of ignition timing before this, but I feel like he really clarified things well in this video, and then the dyno bit was really well done, and then you get an awesome drag race for dessert. All his videos consistently deliver even if they are spread out, you don't want to miss the next one.
Crazy how an old cam swap viper can keep up with a new $200,000 super car, viper always been my dream car.
A 3000 dollar civic with a k24 swap with a turbo can easily destroy an r8. Being far cheaper than both.
..and this is a 30 year old Gen 2. Race against a heads and cam Gen 5 and the Audi will be bus lengths behind.
@@2seep eww
@johnheintz982 try it from a dig. Or with a corner 😅
Lmao
I can't explain how awesome this video is. You show and explain so many intricate things that many other channels do over dozens of videos, in 16 minutes. Amazing.
As much as I'd love a weekly post/monthly post, the amount of knowledge and information you put into your videos is definitely a reason to come back every time! I've re-watched The 3v build more than 5x. Absolutely loving the content!
This is the best video about car, engine... on youtube. No unnecessary talk camera shots just straight ahead to the point, no time waisting. Thank you Sir.
Such an underrated channel this is as good as it gets, so informative too! I feel it was selfish to let this masterpiece go unseen, so I will have no choice but to send to everyone I know, gramma better watch this
Finally you're back here, thanks for posting, I'll watch you from Brazil.
Mano o meme da Nazaré ta aqui kkkk
É nóis! 👏🏻🗿
Tm Junto!
SP 🇧🇷
tmjj
"the hood only has 3 nuts but needs 4 to remove it" 😭😭 Gold.
How did you flop that around? 😭
Might need to rewatch the vid buddy😂😂😭😭
You gor that backward buddy 😅
Bro watched the video backwards
@@papaguro When you watch the video backwards it says "Paul is dead"
Whenever I hear 8L V-10, I know exactly what car we're talking about. I came here just to say that. It's a synonym for Viper - my fav car as a kid. Yes, I had 1/16 models - a black R/T10 and a blue GTS with white stripes. One of the best looking/sounding cars ever. Respect to the turn-of-the-century Viper!
I appreciate how detailed these videos are. It scratches an itch that needed scratching.
For me it makes that itch itch more
The run-through of the power gains from different stages on the dyno chart was truly the best I've seen. Walkthrough explanations, visuals, and doing the math for us was just perfect!
Super tight editing and time lapsing made this 16:44 video feel like 5 minutes! My ADHD is jumping for joy!
babe wake up, new four eyes
The reason the Audi did so well from a dig is because when it's in launch control mode with traction off and in dynamic mode the transmission goes into Amax mode where shifts are incredibly fast and slip with upshift engagement to cause some forward momentum. Amazing video guys love all the quickness and not boring us with too many details!
yes the shifts in dynamic mode are surprisingly violent, that car is a beast.
@@Four_EyesI found that in my Audi A6 which has a torque converter and my friends RS5 which has a DCT the shifts in dynamic are more violent, but they still have feel like they buffer a little on both cars when shifting just to keep things feeling smooth while driving, switching to the paddles in both cars makes the shifts very violent and shifts faster with zero buffer even with the torque converter in my car, likely why when Dustin switched to the paddles in the rolls the R8 performed a lot better.
Amax mode
Thank you. Now I know what it's called
Yeah and vipers are known not to have any traction control systems. That's actually what I would add is a proper traction control system. Lol
4wd doesn’t hurt either
Dude I LOVE your videos of your Mustang and Viper!! They are so well-edited and everything is simply explained and easy to understand! Not to mention how CLEAN your builds are how they're not overly excessive!
This has got to be one of, if not my favourite car channel on RUclips!
thank you sir
I loved that explanation of advancing and retarding engine timing. It's super helpful for those of us that have never tuned anything before!
Absolutely. And especially the Swing example.
Because we've all done it and you can imagine the momentum.
Sounds freaking mint with the resonators. It bums me out when people remove them thinking they cause a restriction and end up making their car sound awful.
I've been watching your Viper for some time. You really know your stuff, and your mechanical skills are impressive. I noticed the timing chain lacks the tensioners, which seem so common today. Your Viper does really impress me, as do your driving skills. Great video.
I've always been a huge Viper fan, GTS particularly. I also love that you're very intelligent and informative throughout the whole process. Thank you for your fantastic content and I can't wait to see where this car ends up. Great work!
thank you Andrew 🙏
MY GUY! 4 long months I've awaited your valiant return. The content you provide is second to none and I'm NOT GLAZING. You'll blow up soon man, keep it up.
I love that viper! For an older car it can really hold its own and still do well today. Great video.
thank you Sam 🙏
You honestly might be the best RUclipsr in my opinion. You spend a lot of time and effort into your videos and it shows. Your videos keep me entertained like my child watching those fruits dancing😂. It almost gives a nostalgic feeling, like watching all late 2000s early10s car tv shows when I was a kid with more retainable information. Thank you, I hope to get to build cars like yours someday. Have a good one!
I could not agree more with this comment. FourEyes is such a gem of a channel!
I love the total unbiased video thats literally specifically about proper power adders and i love how you build the video man. First 10+ min videos that i actually enjoy haha
i've never seen your content, but HFS, you didn't lose me for one ADD second with the outstanding pacing and editing! Love the speedrun details of tear down/reassemble. familiar with every piece of the process, but don't need the minutiae to be entertained. well done!
I've been my own mechanic my entire life, not claiming to be a master mechanic, but your explanation of how timing works FINALLY clicked for me!!
I can't wait to see the next video in 2025. This is a sleeper of a channel
I'm in!!! first time watcher, and this is what I'm here for.. thanks for posting a on topic, factual and non nonscense video on the in's and out's of engine tuning. this is the way! thanks!
Mopar/Viper guy here. Awesome video as usual, I thought the Viper did really well against the Audi considering all the advantages it had. Back in the day, there were a few guys in the Viper scene that achieved 600-650++ whp naturally aspirated so it's certainly possible with the right setup and tune. A personal friend of mine drag raced a '99 RT-10 for a number of years that actually had the engine built by Lingenfelter after leaving Hennessey. It was a super high compression (14.5:1) 545CID that put out somewhere around 850-900 HP and ran a best 1/4 time of 9.43@150+. Pretty cool what the Gen2 engines are still capable of!
Videos keeps getting better, i really like the animations of the cylinders, which are also really well made.
Also he managed to explain valve timing tune better than anybody with that analogy.
They are really entertaining to see, and i talk as one which never ever changed oil even on a scooter.
Great video. The editing and pace are really good with no boring bits. That Viper is a locomotive. Look at the power and torque graphs and see all the area beneath the curves. That's high-bandwidth performance. Also, it's 100 percent duty cycle performance on pump 91.
Dude this is a masterpiece. 100/10 editing, voiceover and filming. Absolutely beautiful channel. I'm pretty sure I tried to like this video 20 times
Dude that exhaust note at 8:13 from the overlap is just DOPE
dude this is one of the better car channels ive came across on youtube!
Keep killing it man
Mad respect on the ride man. Sounds great, looks great, is great. Viper was the car that got me into cars.
It’s always a good day when a Four Eyes video drops 💯
Bro holy shit can you please record and edit every car RUclipsrs videos from now on?!😭🙌🏽 This entire episode (at this point, it deserves that title) was absolutely amazing! So informative, concise, quality footage, well explained, and didn’t skip a single BEAT with a bunch of random talking and vlogging!!🔥🔥🔥🔥
Don’t own either car nor does it benefit me in any way but I’m subscribing!👍
thank you David 🙏
sounds great, big respect keeping that monster on the road without any TC, stay safe.
One of the best automotive vlog channels, especially with an OG car like the Viper!
This video was top tier man. I actually learned a lot and enjoyed watching this from start to finish. Packed all that hard work into a 16 minute video, respect. Great commentator too. Thank you.
The handicap was so he knew you weren't going to spinout into him. Smart friend.
I liked before even starting the vid, I already know it's gonna be good.
Excellent, excellent video. Thank you creating such a professional video, explaining all the work in so much detail. Fun to watch.
I just re-watched one of your videos earlier today and was wondering when you were going to drop a new video. The absolute timing 🤣🤣🤣
Best explanation of complex engine topics, best video quality in terms of editing! Thank you!
The way you film and talk about installing everything, is single handedly why i just subbed, fucking amazing my dude. Makes working on cars or watching work being done so much more pleasurable 🤙
I clicked on this vid so fast, 11/10 quality
My two very favourite v10s in a single video. lucky day.
8:15 I wish you could have seen my reaction bud. My eye brows raised and I experienced an eargasm. And then I couldn’t find the like button fast enough.
8:02 had a scare there for a moment
Dude, good driving. To handle a Viper with no traction control has got to be one of the hardest cars to launch. That low end torque is *unusual* and is a fucking beast to manage.
Well done man. Even Carroll Shelby had good things to say about the Viper. Baddassest cars for sure
Dude, what a wonderful video. You are the one who deserves to have the car you have because it is like a talented guitarist tuning his guitar perfectly. Take good care of that Viper.
I WAITED THREE F*CKING YEARS FOR THIS! LET'S GOOOOO!!!! 🔥🔥🔥
This production is a masterpiece, watched entirely
Great video. Excellent explanations and those graphics are perfect.
And he’s back!
6:13 Minor mistake made here, but it's a very simple thing to mend that helps a lot when doing future oil changes. ALWAYS lubricate the oil filter gasket with some new oil, if you don't then the gasket will basically fuze to the mating surface. A lubed gasket will still seal fine if properly tightened, while still allowing for some movement whenever you go to remove the old filter. A dry gasket will remain still, as you struggle to untighten the filter with the gasket not moving at all. (Source: 4+ years of experience changing oil on cars for work)
I should also add, while this is probably a trivial thing to most people it is a very simple step to take to save yourself from future struggle when doing regular maintenance on your car. Ask any old gear-head if you should lube the oil filter gasket, they will all give you the same answer (unless they are incompetent)
AFR's effect how quickly a charge burns so is probably why he dialled in the lambda first then timing. And if I remember correctly you want peak cylinder pressure to occur 15⁰ after TDC on the power stroke to achieve maximum mechanical advantage. This is the first video of yours I watched and immediately subscribed, it was awesome. No faff. No drama. Clear and concise. Can't wait to see what other gems you've got
I can’t believe how easy the top end came apart, love the simplicity of a push rod motor
well when you take a several hour job and shrink it down to under 20 mins it will look very easy
It’s got quick release valve covers
2 V10s on a desert road? thats a 20 gun salute right there
Now this is a grown-man video...! No pointless jokes and all realll assss Information that's hella realistic with facts!! This video style is a 10/10 for me homie!
1:40 funny one there, lol
The R8 short shift 14:20 hurt me
Yeah, that's the sound of the death of manual transmissions right there.
Very well put together video. Fast speaking and quick tear down and install and strait to the point. Was impressed with the torque that cae puts down!! Nice work.
You had me at “interested in dumb shit”
not one video I have watched on youtube explains all the processes in detail like this. absolutely amazing work!
13:35 AS IT WAS WRITTEN
1" drive torque wrench to bust a crank bolt free. My guy, let us send you a proper impact wrench
what torque wrench do you recommend in general? balance of accuracy and longevity?
@@Four_Eyes Sounds like they're gonna send you something, but since I saw this: torque wrenches are for tightening, not loosening. For loosening, an impact wrench (or, on the cheap or in tight spaces, a breaker bar) is the right tool for the job. I suspect Torque Test Channel will recommend a Milwaukee Fuel 1/2" drive impact wrench.
Using a torque wrench as a breaker bar risks compromising its accuracy for the job it's meant for.
@Four_Eyes agreed. It's probably fine what you have to tightening to a spec. But pull of a trigger to remove something like that saves a lot of fuss. Shoot us an address torquetestchannel@gmail.com
@@Four_Eyes you got a torque wrench covered. Let us send you an impact wrench for easy removal email in channel page
What an absolutely fantasticly edited video showing only what matters in swapping cams. WELL DONE SIR.. 👏🏻👏🏻👏🏻
He’s done it again🎉 from basic bro mods on a 3V to an R8 killing viper! Truly impressive! Always a joy when you upload🤙
first I was like R8 killing? then I remembered this R8 ain't stock, so yeah even more impressive!
The second start at 8:07 was comical
instant sub after u explaining so much in the very easy understanding, pls i need more of this bc i wanna do what u do someday, this has taught me even more of what ill need to know, the editing is incredible too
7:29 *Tool intensifies
Makes me happy knowing the exhaust video was from 2 years ago because it means this man is just one of us. Saving money to be able to afford these parts like everyone else and not just get sponsor money. Great video and an amazing build keep it man
3:36 perky yeet
When I was in auto tech school, they had a prototype V10 from Dodge. Yes, that V10. It was one of the engine from the prototyping phase of the Viper V10. It had a cast iron block & aluminum heads, IIRC. It was an entire engine from intake to oil pan.
During our "engine - machanical" phase, the instructor said if I could take it all apart and get it back together using the proper torque specs & checking clearances of everything and it turns over easily, I'd get an A for that part of the class. Using the standard V10 specs for a cast iron block and the specs for assembling the aluminum heads from a viper, it all went together fine. No issues and no parts left over lol.
I even got extra points when I put the GM 2.5L Iron Duke back together that some young guys took apart and never finished assembling. Tbh, I don't think they ever really started lol. That was a fun time. I'm the only person that was allowed out in the shop unsupervised. I was also 10 yrs older than everyone else and had that much more experience & knowledge.
I was only there for technical reasons. I knew more than enough to work as a tech but no one would hire me because I didn't have any professional training. So I went there and got a technical diploma. I learned a few things but I knew a majority of the stuff they taught. So I was going for the paper saying Ive had real training by a recognized school & organization.
Great great great video. Always a pleasure to watch. Please never change your style. That gen viper has always been one of my faves.
I can see why people some prefer automatics, because taking your hand off the wheel at that speed looks terrifying 14:33
well ya see when you gain a tiny bit of muscle mass in your arms and learn not to yeet the steering wheel into oblivion overcorrecting going over an uneven patch of road its quite easy.
If you are not in the financial market right now, you are making a huge mistake. I understand that it could be due to ignorance, but if you want to make your money work for you...prevent inflation
A lot of people still make massive profit from the crypto market, all you really need is a relevant information and some < professional advice. ‹ it's totally inappropriate for investors to hang on while suffering from dip during significant
Best signal provider in the market.
Knowledgeable, level headed (no loss like some other traders who recently jumped on the bandwagon).
The very first time we tried, we invested $3000 and after a week, we received
8500. That really helped us a: lot to pay up our bills.
I wonder what dumbass makes these bots and think they are geniuses
spam rubbish
Oh my god, a viper being my favorite car of all time, that shot of the viper in the sunset at about 15 min 20 seconds literally almost brought a tear to my eye. Lmao it was just so perfect on my soul
1:49 Can you say Bachelor pad! 😄😄😄 theres no woman living in that house. Very evident here.
Really cool breakdown. I didn't NEED the tutorials about valve and ignition timing, but the graphic visualizations were superbly done and it's always fun to watch those.