Ive been painting cars and industrial spraying since the late 70s and have to admit i'm not a great lover of the modern water based base coats..i try a stick with the spirit based when i can..also i prefer holding the air line in my left hand as you do i pull it away from car or feed more out as needed..nice job.
Just been reading all the comments about fluid tips and nozzle sizes..all my guns are gravity fed and 2mm or 2.5mm i use same guns for heavy primer as fine finishing..you can always turn a 2mm gun down for fine finishing but 1.4 cant be opened up for heavy stuff..just my opinion though i'm old school.
Jimmo do you have the plastic protective part number replacements for the scale, Our jobber cant seem to find. I am referring to the display portion and the actual "neck" "shaft" of the scale itself
just a pointer but you can run the hose from behind you and up your back to your spraying arm so that the hose is not close to any panel while you are painting, very nice work ! Paint on Brother!!
Rajabu Rajy you can have different paint scheme ie Lechler standox etc... the paint system comes with colour scheme software, you can obtain the colour code from the panel stamp and make the colour.
It contains less or no solvent that makes it compliant to spray in heavily regulated areas. You can use the same equipment for the most part, it is comparable to solvent just a few different quirks.
Great job Sr,, i would like you to post me a video showing the basic of waterborne color matching procedure,,i know dyna akzonobel and never used waterborne before,,i'd be glad if you could help
The groundcoat is a shade of grey, this one would be closer to white. Because the red is transparent, it will cover white with fewer coats than it would black. Another reason is because new panels require a primer to be applied first over the black e-coat for paint durability.
I think I’m a very good painter but I love to watch this guy. His patterns, gun control and economic movements are just a freaking ballet of control. I just call him Tekna guy lol
i have a fender and when i finish painting it, it is a different color than what is in the can. The paint matches the rest of the car perfectly when i spray a test spot on the car. The fender is from a junkyard. When i first painted the fender the color came out correctly. That was with another brand of paint. Any ideas?
Raffo Asus it’s sealer, one coat, air pressure will be the spray gun manufacturers recommended psi to achieve the required air pressure at the air cap. ie...Tekna pro lite would be 24-25 psi at full trigger.
Hey Just a note to let anyone who might care about it -it is possible to turn a regular tekna into a clear gun by adding the DV703529 Devilbiss 703529 Air Separator & Seal Kit and DV704200 Devilbiss Automotive Refinishing 704200 (Pro-102-Te25-K)Air Cap & Retaining Ring. $150 US from autotoolworld. I wish i could recommend the gun setup but after 2 jobs I find it no where near the atomization of either the Sata 5000 or the ws400. It is a wet center heavy rp like pattern but at full material on a 1.3 tip i felt it was no better than the te20.
That is just plain beautiful sir. Is it me or does that job look dirt free? You just can't beat a Devilbiss paint gun. Thanks for a great video take care and have a good weekend.
Two thing, why they din't open the hood/trunk to paint the edge after primer?There is always a missed spot. And why was no blending in? Otherwise a great job.
Your opinion? I'm spraying SPI universal HS clear with a tekna clearcoat gun. They strongly recommend using 1.4 tip. Would you suggest the hv25 or hv30 cap for the smoothest finish? I have a decent compressor with 20cfm. Thanks.
I need some help. What should i do if my waterborne basecoat isnt dry enough and its allready covered in 2k clear. I have pressure point problems. If i put pressure with my nail i see a dent in the paint. It has been a month since it got painted. Will it dry over time ?
You have water intrepment water hasnt evaporated and won't because it's sealed of with clear. Looks like you have to take the clear off so basically start all over bugger😣
Julio. I have thousands of hours behind Teknas. If you’re loud and have an excess of overspray your gun is not set up correctly. Check your data for pressure range and adjust accordingly. Ensure you’re using the pressure gauge provided with the gun.
Tudo muito bonito mas , a cor , ficou a condizer com as restantes peças ? ..Isso deverias mostrar ...Já agora , comigo o capô sai SEMPRE FORA ...Abraço , de GUIMARÃES , PORTUGAL. .
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
That Sata is rippin that Waterborne. I use Tekna Clear coat for a long time now. I love it. Great work and thanks for the video.
Ive been painting cars and industrial spraying since the late 70s and have to admit i'm not a great lover of the modern water based base coats..i try a stick with the spirit based when i can..also i prefer holding the air line in my left hand as you do i pull it away from car or feed more out as needed..nice job.
ive been painting 23 years. You are one of the best i've seen on RUclips.
Brother I need your help
I am understand this job.
Any company have your side.
Just been reading all the comments about fluid tips and nozzle sizes..all my guns are gravity fed and 2mm or 2.5mm i use same guns for heavy primer as fine finishing..you can always turn a 2mm gun down for fine finishing but 1.4 cant be opened up for heavy stuff..just my opinion though i'm old school.
He makes everything look so effortless
Hii
Jimmo
do you have the plastic protective part number replacements for the scale, Our jobber cant seem to find. I am referring to the display portion and the actual "neck" "shaft" of the scale itself
SAR00135 by Sartorious. Can get them from buysmarttools.com
A much better result than I could obtain with my trusty yard brush!
This guy is so routiened , i passed out brilliant thank you for the clip
just a pointer but you can run the hose from behind you and up your back to your spraying arm so that the hose is not close to any panel while you are painting, very nice work ! Paint on Brother!!
Jeff Barker I'm also painter from India. I want to talk to you on paints topic
i need to understand whats name of tools using to mix couler
Rajabu Rajy you can have different paint scheme ie Lechler standox etc... the paint system comes with colour scheme software, you can obtain the colour code from the panel stamp and make the colour.
tekna is the best to spray clear coat i love that gun. Nice job btw
Nice video.! What camera are u using..? it's very clear n it move easily
Hey bro i love your paint jobs. How many turns of material do you set your spraygun to for basecoat and clearcoat ?
Insane paint job nice vid bro
Great video whats the advantage of waterborne paint is it cheaper easier to use and do you need a special gun to spray it.
It contains less or no solvent that makes it compliant to spray in heavily regulated areas. You can use the same equipment for the most part, it is comparable to solvent just a few different quirks.
Good
I am understand this job.
Experience 5 years.
Working from Singapore
Thank you friends, it is very useful for us to copy the way you paint
Great job Sr,, i would like you to post me a video showing the basic of waterborne color matching procedure,,i know dyna akzonobel and never used waterborne before,,i'd be glad if you could help
The Paint Booth look brand new.. R. M such a good products.!
Passes product mixing measures please? Tks
...which colour of paint did you say before spaying the red? And why did you spray it first
The groundcoat is a shade of grey, this one would be closer to white. Because the red is transparent, it will cover white with fewer coats than it would black. Another reason is because new panels require a primer to be applied first over the black e-coat for paint durability.
I think I’m a very good painter but I love to watch this guy. His patterns, gun control and economic movements are just a freaking ballet of control. I just call him Tekna guy lol
.
Ăaaaăl
😑 😑
I am understand this spray painting job.
Perfect result bro👍👍
Hi I am one of the spray painter . the gun is super and work also.
Sata jet digital spray wow thats really lovely
i have a fender and when i finish painting it, it is a different color than what is in the can. The paint matches the rest of the car perfectly when i spray a test spot on the car. The fender is from a junkyard. When i first painted the fender the color came out correctly. That was with another brand of paint. Any ideas?
Nice bro👏👏
Can't use self etching primer on the bare metal then seal it?
setting the gun for the primer? pressure? how many laps for the fluid? good job !!
Raffo Asus it’s sealer, one coat, air pressure will be the spray gun manufacturers recommended psi to achieve the required air pressure at the air cap. ie...Tekna pro lite would be 24-25 psi at full trigger.
i am a car painter.. your all video r amazing.. thats all help me to make my all car more glase and clear
Esa pistola no gasta mucho material o será mucha presión de aire?
Superb work
Good job.
I like it.
Good man.
Best of luck❤
NICE JOB DONE !!!!!!!!!! LOOKS PERFECT AND BEAUTIFUL
This is the first I have ever seen you use a sata how did it preform and what size is tip did you use.lt looks good
That is outstanding and you guys have made me want to go with RM paint for my model cars
great video.......how does waterborne paint hold up compaired to solivent based paint.....?
Hey Just a note to let anyone who might care about it -it is possible to turn a regular tekna into a clear gun by adding the DV703529 Devilbiss 703529 Air Separator & Seal Kit and DV704200 Devilbiss Automotive Refinishing 704200 (Pro-102-Te25-K)Air Cap & Retaining Ring. $150 US from autotoolworld. I wish i could recommend the gun setup but after 2 jobs I find it no where near the atomization of either the Sata 5000 or the ws400. It is a wet center heavy rp like pattern but at full material on a 1.3 tip i felt it was no better than the te20.
U sure that’s waterborne paint? My shop water paint is blue when sprayed and changes color when dry, sherwin Williams
That is just plain beautiful sir. Is it me or does that job look dirt free? You just can't beat a Devilbiss paint gun. Thanks for a great video take care and have a good weekend.
here is my guess. clear te 20 2.5 turns out and fan narrowed .5 turns on the tekna. I would rather bust it open and spray closer but that is just me.
Thank you for your video,just want to know what did u mixed with clear ,,
Hi
Marc du Toit Jones
No se escribir ingles me disculpas
No se escribir ingles me disculpas
Hi. WHAT BRAND IS THE BASECOAT ? SOLVENT OR WATERBASED? THANKS
BASF Onyx Water
По-настоящему круто! (Realy cool!) Say "Hi" from Moscow✊
Fantástico seu trabalho estou começando e vou assistir todos seus vídeos para me ajudar obrigado por postar esses vídeos incríveis
LAYS
How much psi to put the clear coat?
Não sei daqui como ficou a tonalidade, mais o cara é pistoleiro nato kkkk...parabéns pintor.
I love your videos. What's the wait time between base and clear?. Is the clear Water base too?. Thanks
Hey Jim, Thanks. It’s about 15 minutes between base and clear. The clear coat is still solvent based.
عمل جيد جدا
Two thing, why they din't open the hood/trunk to paint the edge after primer?There is always a missed spot. And why was no blending in? Otherwise a great job.
The 1st Grey Layer wasn't primer. It was a ground coat for the Solid red.
Your opinion? I'm spraying SPI universal HS clear with a tekna clearcoat gun. They strongly recommend using 1.4 tip. Would you suggest the hv25 or hv30 cap for the smoothest finish? I have a decent compressor with 20cfm. Thanks.
Nice job bro
How many PSI did u use? Excellent job
Pintor automóvil muy bueno tú trabajo siempre veo tú vídeos saludó de Argentina maestro yo pintor
Travayll
Nice work!
What materials did you spray on the red car after painting?
Nice work guys,I like it
Nick is this you bro?
esta muy bien el trabajo,pero deverias de empezar a bañar desde el techo acia abajo
Another great video. Keep em coming guys, they are great. :-)
Hello my dear friend I am a spray man too I love that job
What air cap and nozzle size please ??
What's the code of the red paint color?
Why are you spraying without hand protection?
I love my job♥
You are good job 👌
I am spray painter In India
I need some help. What should i do if my waterborne basecoat isnt dry enough and its allready covered in 2k clear. I have pressure point problems. If i put pressure with my nail i see a dent in the paint. It has been a month since it got painted. Will it dry over time ?
You have water intrepment water hasnt evaporated and won't because it's sealed of with clear.
Looks like you have to take the clear off so basically start all over bugger😣
Awesome work..i like the final result 👍
Nice job
what is the merk of spray gun.
Which gun are you using at 7:05??
used my tekna for the first time today, loud and a lot of overspray
Julio. I have thousands of hours behind Teknas. If you’re loud and have an excess of overspray your gun is not set up correctly. Check your data for pressure range and adjust accordingly. Ensure you’re using the pressure gauge provided with the gun.
Como quedo calibrada tu pistola
Hola Porfavor. Dame la marca de la pistola de clear
How much clearcoat layers
Spray gan name of company
How did the clear blend on the quarters go?
Great job!But I always start at the roof and work my way down but I guess we all do things different 🙂
80542
8054652588 what sapp number country code 0183 sms plzz
Шикарный цвет, отличная работа.
Esa pintura RM ya la usé trabaja bien pero aquí costa Rica casi ningún talleres les gusta los pintores pinta en agua y es tan fácil pintar
Yo tanbien.soy pintor...y pintas muy bien...me llegas compa soy chapin.
ما هى الماده اللى رشها بعد الدهان ارجو الرد ولك كل الشكر
هههههه هزا مو عربي
بس تغريبان اسمو ورنيش زي بتاع الخشب
What water base is that? I noticed you were shaking it. I spray envirobase and it can't be shook. So was JW what base it was
Red and blue and silver are hard colours, frig you laid first coat on super wet, hopefully no runs, dirt and you let it flash off for 30 mind
super cool your job
Краскопульт какой ? Девилбис
Excelente trabajo del amigo pintor felicidades
Refinish Network awesome, I would like to learn how to paint like that, cars
Spraygunnya merek apa dan bisa di pakai uk mebel
you not blending the fenders .you spraying the whole car.
Careful with that tiger striping on the roof!
Tudo muito bonito mas , a cor , ficou a condizer com as restantes peças ? ..Isso deverias mostrar ...Já agora , comigo o capô sai SEMPRE FORA ...Abraço , de GUIMARÃES , PORTUGAL. .
Sir is mass ka naam kya he
А почему 2 слой матовий?
What kind of cup and nozzle you use for clearcoat?
Amigo que do bien el color del capot guardabarro con las puertas
good job
Super work appreciated 😃
Very nice job nice work
I need the location there
I just started painting for industrial shit its fun. John Deere and Cat parts. fun