Thank you Duca for elaborating on why you and Roberta chose Meta. In the explanation of methods you have not only educated your subscribers but , brought us along on the journey of your own evaluation and ultimate decision. Thanks again. All the best, Hal
Next week I want to see you at the launch of Yaba! You introduced us to both, Ben and MP three years ago, a very successful rebuild channel. Thank you for that and thanks for sharing your new journey.
Good job Professor Duca! One proof of understanding of a subject is the ability to explain it to one's grandmother. I believe your explanation is grandmother approved.
As a trade school instructor I'd say you are doing just fine in your explanation between the 2 types of construction. You should title this video "Hull construction 101". You are terrific at explaining your trade. Love your videos and look forward to them every week!
EXCELLENT explaining the design and the why of it. While I enjoyed the sailing portion of you channel, it is the construction and engineering that I find most entertaining. Enjoy the process of building both your new home and your new family.
Man she's glowing it's so amazing congratulations once again just remember it takes a village to raise a child and your English is amazing I remember when I first was watching you guys you had a lot of trouble and now it's perfectly flowing❤
Duca, you are a lucky man. Roberta is the sweetest and cutest lady ever. To convince a woman today to live a nomadic lifestyle like this, you better hold on to her. Duca is pretty awesome fellow as well.
You are doing a great job explaining the process of the new sail boat construction, I’ve been following your journey since the shipping container home and enjoyed everything you both put your mind to. Keep the videos coming and I will certainly keep watching.
This is very important information about how your boat is made. Now I can understand that the interior is easier to build. Thank you for your videos.👍👍
One small detail for the workbench, that little toe space under the bench is where the dropped tools 🛠️ will go. Some kind of stick will be helpful to retrieve anything and everything that goes back there 😊❤
One of the few channels that are a pain to watch....because my face muscles get a thorough workout from smiling from beginning to end! Thank you Duca and Roberta!
Your new workshop looks as clean and functional as an operating theatre and I'm certain that you will doing a number of operations in it over the coming months and years. Well done Duca and to Roberta for her wisely reduced support.
Dear Roberta and Duca, firstly - congratulations on your baby on the way - secondly, I am really impressed with the knowledge you have acquired to build a new boat. I find it extremely interesting to listen to your explanations Duca. I wish you both, or should I say all three, good luck with the project and I will follow you every Sunday. All the best from Mr Bengt Sandgren/Norway
Duca's explanation was very good. English is my first, so well done for teaching us this in your second language! Roberta, your English is also very good.
Love the outfitting of the workshop . . . especially the Sika cabinet!! :) I'm getting to refit an RV and will be looking into Sika products because of you. You're a wonderful brand ambassador.
grats on the family addition, i see your boat building to be a new line of watercraft for the world, your globale set up could catch on like a VW beatle. i belive you have a handle on this so build it for all of us, so i can sail like you, all weather all latitudes, carry on and put the wind in your hair.
Being following you both since the reconditioning of Odd. Duca your command of the English language is fantastic. Thank for the explanation on the two types of construction very well explained and ease of understanding. Looking forward to the next installment.👍
That was a great explanation of how your boat is being built. Stainless steel is hard to weld, but the one you showed was perfect. Wow, so happy for you guys.👍
I’m glad you chose to stronger thicker material to build your boat with. No more fear of whales or shipping containers, a real threat sinking your boat. You made a good decision!
A terrific workshop guy's. Perfection. Duca you have a way with words when explaining things to make everything very understandable. Keep well and safe. James.
Very cool, having a much thicker hull plating especially if using a double hull containing floatation material like foam makes a lot of sense to me! I found your explanation of the mechanics of the chimes informative. You've done a great job with the workshop, it looks really good. Have a ripper you guys!
Great to see what you're doing. We have a StrongAl power catamaran and love the method too. We also visited the factory before covid but were unable to see inside, so it was good to see your video and your excellent explanation.
You will need a leaf blower because the first time you make sawdust, you will need to clean the workshop out. Otherwise, the sawdust will overwhelm you. The easiest way to do that will be to blow everything out through the front doors, and then sweep it off the floor in front of the workshop. It will also show you where you need to secure things you don't want blown away.
I did not know about this construction method, but it is very interesting. Well explained Duca 👍 And congratulations for the workshop. I wish I have the same to work on my boat!
So I have exactly the same set of files in my workshop. Spent today fitting a vice to my interim workbench which I will be using to build my forever bench. I feel that Duca and I are brothers in sawdust.
Very interesting, looks aluminium is the way to go. Your friends on Parlay had another mishap where a part of their starboard bow lifted. Looks like Delos might also be contemplating a metal boat.
Yes, Roberta is correct about chines on a mono hull but not a catamaran. Many river jet boats are built like your new boat is being built and then they add stringers to protect the hull from getting bent because they usually hit rocks in the river and don't want to completely destroy the boat after the first rock hit.
FELICIDADES por el proyecto , se os ver tan ilusionados y contando la construcción con tanta pasión, ya tengo ganas de ver su construcción y mas ganas veros ya navegando, saludos desde MALAGA ESPAÑA
I do not know if you know it or not, but they do make drill extensions and this is one that is on Amazon’s 2PCS Forstner Bit Extension Set with Anti-Slip Design,Adding Over 3.28"&5.64" Drilling Depth to Forstner Bit,Suitable for Process Wooden Furniture,Timber and etc. I hope this helps you out. Keep up the good work.
Thanks for a Wonderfully Explained Presentation of the Two Methods of Construction ... I found it Super Informative .... Best to You Both + ..... :-) :-) :-) .... Keep well, So looking forward to the Boat Build .... Cheers to ALL from ChCh, NZ
Pretty much exactly like the metal version of a stitch and glue plywood, where developable panels form the shape of the hull. Looks much smarter than that mess of tack welds and impossible to clean corners in that other boat.
Hi Guys, I hope you're both well, I would always prefer a thicker plate design to a framed one. I am so pleased that she will be a Hard Chine too. I guess that the TOF is easier to measure on the welds, with an unframed construction. If I was designing a boat using your method, I would insert various conduits with wire pulling tapes included. Deus te abencoi.
Merci pour cette vidéo! Qui m’intéresse énormément à partir de la 12ème minute 😉 Hâte de voir la prochaine vidéo … Bonne suite à vous (dans quelle vidéo présentez vous le plan de votre futur voilier svp ?)
I agree w/ your arguments for thicker plates and less frames. But I wonder why yards like KM boatbuilders in the Netherlands don't build boats your way. Price of Strongall? Customers insisting on round bilges?
I've sailed on a few hard chined steel boats and they are slooooooow. Has the designer given you speed figures? Great video! Ben watching since he start of the steel refit. Great content! Keep it up!
Great episode---love the pic of the mom-to-be just glowing with her new baby "loot". I'm still trying to figure out what in the blue blazes a "chine" is. . . .hmmmm, like a mini-keel? Your workshop is awesome and will remain so until the first moment that you use it, lol. Then the neatness goes out the window and dust, scraps, etc. get under the workbenches, in corners, and underfoot. Such is the life of a workman, eh? But the beauty and functionality still remains!
A Chine is a sharp edged change in angle between the hull plates ...eg between the sides and bottom plates, a lot of traditional monohulls have curves all along the hull but power boats that plane need sharp chines and sometimes chine strips to throw the water passing under the hull out without dragging on the sides. Modern sailing vessels use chines because they give a more regular interior space and use twin rudders so the chine a bit like a keel gives more bite when heeled over. 🧙🏼♂️
Learned a lot from this video so thx Duka & Roberta. Cool to see the two sides of alu-thoughts: plastic vs elastic. Like Freedom/Delos vs Odd (wonder what Noah is doing?) Will be interesting if they one day in the future are able to test/compare the two methods.
Cool this project, you are really in the beginning. Yaba is at the end of the build…. Curious to see how you can keep you and Yaba connected 😊. Is it going to be when you end they will start a new one? 😅
I have two Meta aluminum Strongall boats and one heavy duty but traditional framed aluminum boat. The welding from Meta is exceptionally good. The one boat is great but not exceptional ie wavy sheets and obvious welding concerns with heat.
Your explanation on the Strongall concept is excellent, thank you. Isn’t it the same building method Alubat is now using on their new Owni boats, like the 370? If the patent is from around 1970 I guess it has run out.
Sobre o casco, explicação claríssima! Não sei se não prestei a devida atenção e perdi, então pergunto: entre as alternativas quina x caverna, como fica a comparação no consumo do material? O alumínio terá um custo por peso (consumido), ou o tipo de fábrica na forma (perfis diversos, chapas) influencia (suponho que sim)? Considerando que um veleiro não é somente casco, e as outras questões relacionadas à estrutura (esqueleto e fechamento x fechamento estrutural), como a fixação de tudo o que se agrega (acima e abaixo do convés: mastro, estais, motor etc) que cobrarão medidas de reforço estrutural mais pontual ou linear, o que é mais coerente/compatível com um esqueleto estrutural do que com superfícies ‘estruturalmente difusas’. Chapa grossa num esqueleto seria a combinação do melhor nas duas alternativas? Arcando com peso e custo maiores?
Thank you Duca for elaborating on why you and Roberta chose Meta. In the explanation of methods you have not only educated your subscribers but , brought us along on the journey of your own evaluation and ultimate decision. Thanks again. All the best, Hal
Next week I want to see you at the launch of Yaba! You introduced us to both, Ben and MP three years ago, a very successful rebuild channel. Thank you for that and thanks for sharing your new journey.
Yaba is looking fantastic they have done a magnificent job
Good job Professor Duca! One proof of understanding of a subject is the ability to explain it to one's grandmother. I believe your explanation is grandmother approved.
As a trade school instructor I'd say you are doing just fine in your explanation between the 2 types of construction. You should title this video "Hull construction 101". You are terrific at explaining your trade. Love your videos and look forward to them every week!
EXCELLENT explaining the design and the why of it. While I enjoyed the sailing portion of you channel, it is the construction and engineering that I find most entertaining. Enjoy the process of building both your new home and your new family.
Roberta glowing with motherhood and we are so thankful! Love the workshop.
🥰
Man she's glowing it's so amazing congratulations once again just remember it takes a village to raise a child and your English is amazing I remember when I first was watching you guys you had a lot of trouble and now it's perfectly flowing❤
Duca, you are a lucky man. Roberta is the sweetest and cutest lady ever. To convince a woman today to live a nomadic lifestyle like this, you better hold on to her. Duca is pretty awesome fellow as well.
Love you guys! So excited for you to start both the van & the boat build. Be well. ❤
🥰
You are doing a great job explaining the process of the new sail boat construction, I’ve been following your journey since the shipping container home and enjoyed everything you both put your mind to. Keep the videos coming and I will certainly keep watching.
I have to say your English has come a long way from your days when you started this channel.
This is very important information about how your boat is made. Now I can understand that the interior is easier to build. Thank you for your videos.👍👍
I think Duca is as excited about his workshop as he is about the boat! Not really but I can tell he’s proud of his accomplishment !
One small detail for the workbench, that little toe space under the bench is where the dropped tools 🛠️ will go. Some kind of stick will be helpful to retrieve anything and everything that goes back there 😊❤
One of the few channels that are a pain to watch....because my face muscles get a thorough workout from smiling from beginning to end! Thank you Duca and Roberta!
Mmmmmm ... new workshop, nice. Lookit all the containers of Ducaflex up there on the shelf.
Great explanation of what makes META unique vs other Aluminum boat makers. I didn’t know about META until your channel. Thanks!
Your new workshop looks as clean and functional as an operating theatre and I'm certain that you will doing a number of operations in it over the coming months and years. Well done Duca and to Roberta for her wisely reduced support.
Awesome workshop!! Have fun!!!
Kreg is based right here in my home town, glad they came on board
I though t your explanations on the two boat building methods were excellent. Thanks!
Roberta: Dise Finally e tambem "FINALMENTE" com sotaque brasileiro. Parabens!
very interesting episode about the hull. Learned a lot!
Dear Roberta and Duca, firstly - congratulations on your baby on the way - secondly, I am really impressed with the knowledge you have acquired to build a new boat. I find it extremely interesting to listen to your explanations Duca. I wish you both, or should I say all three, good luck with the project and I will follow you every Sunday. All the best from Mr Bengt Sandgren/Norway
Pareceu-me perfeitamente claro! Cela m'a semblé parfaitement clair, passez une bonne semaine à tous!
Duca's explanation was very good. English is my first, so well done for teaching us this in your second language! Roberta, your English is also very good.
great explanation, and I understood all of it. love the science side of it.
Love the outfitting of the workshop . . . especially the Sika cabinet!! :) I'm getting to refit an RV and will be looking into Sika products because of you. You're a wonderful brand ambassador.
Outstanding small workshop design. Great explanation of your boat hull construction!
grats on the family addition, i see your boat building to be a new line of watercraft for the world, your globale set up could catch on like a VW beatle. i belive you have a handle on this so build it for all of us, so i can sail like you, all weather all latitudes, carry on and put the wind in your hair.
Being following you both since the reconditioning of Odd. Duca your command of the English language is fantastic. Thank for the explanation on the two types of construction very well explained and ease of understanding. Looking forward to the next installment.👍
That was a great explanation of how your boat is being built. Stainless steel is hard to weld, but the one you showed was perfect. Wow, so happy for you guys.👍
I have workshop envy. Nicely done sir.
😁
I’m glad you chose to stronger thicker material to build your boat with. No more fear of whales or shipping containers, a real threat sinking your boat. You made a good decision!
A terrific workshop guy's. Perfection. Duca you have a way with words when explaining things to make everything very understandable. Keep well and safe. James.
Very nice workshop😊
Very cool, having a much thicker hull plating especially if using a double hull containing floatation material like foam makes a lot of sense to me!
I found your explanation of the mechanics of the chimes informative.
You've done a great job with the workshop, it looks really good.
Have a ripper you guys!
Great to see what you're doing. We have a StrongAl power catamaran and love the method too. We also visited the factory before covid but were unable to see inside, so it was good to see your video and your excellent explanation.
Very good explanation
You will need a leaf blower because the first time you make sawdust, you will need to clean the workshop out. Otherwise, the sawdust will overwhelm you. The easiest way to do that will be to blow everything out through the front doors, and then sweep it off the floor in front of the workshop. It will also show you where you need to secure things you don't want blown away.
Excelente Trabalho Duca.Adorei sua oficina.Um grande beijo aos dois.Sempre sucesso⚓⛵⚓⛵💖💖
Interesting that you guys, Plucky, SV Delos are all building Aluminum boats.
Great explanation Duca and wonderful job on the workshop. You two look very happy! Be well!!! 😎❤👍
So excited to see your new boat start to be formed! Also looking forward to seeing your new Van Home being created!
I did not know about this construction method, but it is very interesting. Well explained Duca 👍
And congratulations for the workshop. I wish I have the same to work on my boat!
It is sad that the workshop is a temporary structure, it is a work of art, well done Duca.
Wow,,, awesome video,, Duca. You did your homework about the different styles of boats, Thank you for explaining your choice of construction and why.
So I have exactly the same set of files in my workshop. Spent today fitting a vice to my interim workbench which I will be using to build my forever bench. I feel that Duca and I are brothers in sawdust.
Very clear!
Duca, your explanations were very clear. Nice job.
Very well explained, especially with clarifying subtitles. ✏
Very interesting, looks aluminium is the way to go. Your friends on Parlay had another mishap where a part of their starboard bow lifted. Looks like Delos might also be contemplating a metal boat.
Nice articulation. I learned a lot from this vid.
Yes, Roberta is correct about chines on a mono hull but not a catamaran. Many river jet boats are built like your new boat is being built and then they add stringers to protect the hull from getting bent because they usually hit rocks in the river and don't want to completely destroy the boat after the first rock hit.
Love the design! Also the explanation was perfect sir !
Excellent work on your work shop, congrats on baby, looking forward to boat build, thanks and bless you 🎉🎉🎉🎉🎉
FELICIDADES por el proyecto , se os ver tan ilusionados y contando la construcción con tanta pasión, ya tengo ganas de ver su construcción y mas ganas veros ya navegando, saludos desde MALAGA ESPAÑA
Is very impressive 😊
Nice working area guys - have a good one
Duca, lay your planes on their sides, that way you protect the blade from damage.
Very nice workshop, well done!
I do not know if you know it or not, but they do make drill extensions and this is one that is on Amazon’s 2PCS Forstner Bit Extension Set with Anti-Slip Design,Adding Over 3.28"&5.64" Drilling Depth to Forstner Bit,Suitable for Process Wooden Furniture,Timber and etc. I hope this helps you out. Keep up the good work.
Great job explaining to us. Thanks again from Kentucky ✌️😎
Thanks for a Wonderfully Explained Presentation of the Two Methods of Construction ... I found it Super Informative .... Best to You Both + ..... :-) :-) :-) .... Keep well, So looking forward to the Boat Build .... Cheers to ALL from ChCh, NZ
I am impressed🎉
you guys are on a amazing journey
All the best to you , thank you for sharing your experience .
Очень интересная и крепкая лодка!!! Удачи))))!!!
Great job !!! Exited to see your boat come to fruition.
Pretty much exactly like the metal version of a stitch and glue plywood, where developable panels form the shape of the hull. Looks much smarter than that mess of tack welds and impossible to clean corners in that other boat.
Hi Guys, I hope you're both well, I would always prefer a thicker plate design to a framed one. I am so pleased that she will be a Hard Chine too. I guess that the TOF is easier to measure on the welds, with an unframed construction. If I was designing a boat using your method, I would insert various conduits with wire pulling tapes included. Deus te abencoi.
Merci pour cette vidéo! Qui m’intéresse énormément à partir de la 12ème minute 😉
Hâte de voir la prochaine vidéo …
Bonne suite à vous
(dans quelle vidéo présentez vous le plan de votre futur voilier svp ?)
Once again, a very interesting video. Really clear also.
I agree w/ your arguments for thicker plates and less frames. But I wonder why yards like KM boatbuilders in the Netherlands don't build boats your way. Price of Strongall? Customers insisting on round bilges?
Good explanation.
I've sailed on a few hard chined steel boats and they are slooooooow. Has the designer given you speed figures?
Great video! Ben watching since he start of the steel refit. Great content! Keep it up!
You guys should have been there to see Yaba launch! Thank you for introducing me to them
Great episode---love the pic of the mom-to-be just glowing with her new baby "loot". I'm still trying to figure out what in the blue blazes a "chine" is. . . .hmmmm, like a mini-keel? Your workshop is awesome and will remain so until the first moment that you use it, lol. Then the neatness goes out the window and dust, scraps, etc. get under the workbenches, in corners, and underfoot. Such is the life of a workman, eh? But the beauty and functionality still remains!
A Chine is a sharp edged change in angle between the hull plates ...eg between the sides and bottom plates, a lot of traditional monohulls have curves all along the hull but power boats that plane need sharp chines and sometimes chine strips to throw the water passing under the hull out without dragging on the sides. Modern sailing vessels use chines because they give a more regular interior space and use twin rudders so the chine a bit like a keel gives more bite when heeled over. 🧙🏼♂️
yhanks----makes sense.@@clivestainlesssteelwomble7665
Very cool!
another great adventure
Learned a lot from this video so thx Duka & Roberta. Cool to see the two sides of alu-thoughts: plastic vs elastic. Like Freedom/Delos vs Odd (wonder what Noah is doing?) Will be interesting if they one day in the future are able to test/compare the two methods.
Cool this project, you are really in the beginning. Yaba is at the end of the build…. Curious to see how you can keep you and Yaba connected 😊. Is it going to be when you end they will start a new one? 😅
hehehe We are always connected thanks to whatsapp hehehehe 🥰 And we will definitely visit them eventually
I have two Meta aluminum Strongall boats and one heavy duty but traditional framed aluminum boat. The welding from Meta is exceptionally good. The one boat is great but not exceptional ie wavy sheets and obvious welding concerns with heat.
Que capricho a oficina🤩🙌👏👏👏👏👏👏👏 coisa mais linda👌🥰 E muito massa a explicação das diferenças dos barcos com alumínio mais grosso e mais finos👌show!
buena explicacion profesor
Bem interessante entender as diferenças. Mandaram bem. Abs do Vel. Baco.
☺️
Great looking shop and about time we got a finally !! lol🤣
Very clear
Your explanation on the Strongall concept is excellent, thank you.
Isn’t it the same building method Alubat is now using on their new Owni boats, like the 370? If the patent is from around 1970 I guess it has run out.
Sobre o casco, explicação claríssima!
Não sei se não prestei a devida atenção e perdi, então pergunto: entre as alternativas quina x caverna, como fica a comparação no consumo do material? O alumínio terá um custo por peso (consumido), ou o tipo de fábrica na forma (perfis diversos, chapas) influencia (suponho que sim)? Considerando que um veleiro não é somente casco, e as outras questões relacionadas à estrutura (esqueleto e fechamento x fechamento estrutural), como a fixação de tudo o que se agrega (acima e abaixo do convés: mastro, estais, motor etc) que cobrarão medidas de reforço estrutural mais pontual ou linear, o que é mais coerente/compatível com um esqueleto estrutural do que com superfícies ‘estruturalmente difusas’.
Chapa grossa num esqueleto seria a combinação do melhor nas duas alternativas? Arcando com peso e custo maiores?
Duca's Workshop! Well-organized, fully equipped. Looks really good. Meanwhile, Roberta, how are you doing? :¬) Webhead USA
Muy buen episodio!
Well Done essays
Beautiful workshop! I wonder: do you have a dust removal system?
Good strong work bench but the top of your vice should be flush with the work surfacce.
I guess the method of construction is up to the person who is having the boat built. There are pros and cons to both methods.
No problem with me, I already know, like I will be applying the same method as your new boat, but I will be having a double chime
Bin and MP will splash Yaba they are hoping tomorrow, Cannot weight till you guys are ready to start
Great video! I'm curious how the strongall method of construction affects the weight of the boat? Those plates look heavy!
One question I have..would be what is the weight difference?....legal a explicacao!!...