I LOVE the crystalline gloss from this car polish ❤️❤️❤️
HTML-код
- Опубликовано: 10 сен 2024
- 3D Speed
tinyurl.com/db...
prices can change from the point when I shot this video.
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8...
Shampoo
tinyurl.com/yb...
All Purpose Cleaner
tinyurl.com/yd...
Fallout remover
tinyurl.com/ya...
Tar and Panel Cleaner
tinyurl.com/y9...
Clay Bars
tinyurl.com/y7...
Clay Lube
tinyurl.com/yc...
Paste Wax
tinyurl.com/yc...
Drying Aid/QD Concentrate
tinyurl.com/ya...
Sealant
tinyurl.com/ya...
Detail Spray
tinyurl.com/yd...
Water Spot Remover
tinyurl.com/y9...
Tyre and Trim Dressing
tinyurl.com/yb...
Machine Polishers
tinyurl.com/yb...
Polishing Pads
tinyurl.com/y8...
Polishes
tinyurl.com/y9...
Panel Wipe
tinyurl.com/y8...
Microfiber Buffing cloths
tinyurl.com/ya...
Twisted loop Drying Towel
tinyurl.com/yb...
Mini Plush Drying Towels
tinyurl.com/yc...
Wash Mitts
tinyurl.com/y7...
#forensicdetailing #detailing
Been using this AOI for years. I've used nearly every one on the market. This one is by far has the best gloss/finish that I've used and up there with some of the ones with actual lasting protection (3 or more months) compared to other AOI's. I agree also its not that hydrophobic. It's more hydrophilic, but for me that's not a problem, still one of my go too AOI's for any softer clears or single stage clears. Side not as well in my opinion absolutely one of the easiest to work with in direct sunlight and I mean direct sunlight no problems at all I've even left it on in the sun for several days without wiping off just to test and it wiped off just as easy as if it just got worked in.
3D products have been developed for use in direct sunlight and being a mobile detailer it makes my life a lot easier. 3D for the win.
Have you ever try the carpro reflect ?
@@momo-es3ty I haven't, but reflect is not an AOI it is just a polish.
Just got sonax perfect finish & scholl s20 because of your videos. You need to stop recommending more stuff. I'm gunna be broke at this rate
Nice to see the purple dye has been removed from the newer version as this does stain your pads. I do like 3D Speed.
Great as always John. It is very nice to see RUclips detailers do a set in full even if it is a small set and it is refreshing to hear how you brake the rules as we all do as we get better and better.
I have a friend who has a new 911. I reached him advanced driving many years ago and we have stayed mates ever since. He has access to amazing car, Ferrari, Porsche, Lamborghini and VWs LOL the last one is a joke between us when we picked a Passat were we take the car for a nice drive. Me there him home and I buggered up an overtake being us to a lot of power and he took the piss something terrible and he did the same thing on the way home.
Take care of yourself buddy. I hope the little red is not too expensive.
James
I pretty much only use Koch chemie H9 F6 M3 and 3D for my polishes, compounds, got aat 501 & 502 , ONE, Poxy which is amazing. Will certainly get this as well.. hoping to start own detailing business…. Maybe. At the age of 54 !!!
Get in there m8 there's life for us old boys yet!
Ive done many dozens of cars with Speed over the last few years, its great stuff. 3D 505 correction glaze is even better IMO. Its the same as Speed but without any silicones and it has more abrasive. If you like the look of the Speed then you will love the 3D Poxy wax. Its a concentrated form of the Montan wax and polymers that are in Speed but with the abrasives removed.
3d Speed is my favorite AIO! Paired with the battery powered Flex and an orange SDO pad is my go to
i always liked the orange SDO pad.
I bought a few 3D gallons. The best value brand in Canada in the context of cleaners. They have the nano pails. Check them out.
Greetings from New York, love your channel. Just a hobby for me, your videos are the best along with your accent. ( what do you mean I have an accent? 😂 )
It’s a great all in one and have been really impressed with it 👍,have done some old flat cars with it and had great results ,great review
Love 3D speed its great on my motorcycle panels.
Have you compared Halford's advanced detailing products? Don't trust many other RUclipsrs' reviews.
I actually can't really see any flickering to speak of as such... Maybe a bit of flickeryish white balance shifting though. Phones have this issue. The newest iPhones (the 15 or at least the pro models) have a white balance lock in the camera settings. Not sure what phone you have, but earlier iPhones didn't have this... and it is an improvement... Quite a big improvement in these kind of lighting conditions
i used gtecniq ceramic coating a couple of years ago on my ST. it was first attempt and the roof is basically a rainbow , hardly noticable unless you get just the right angle in the right light. ive tried koch chemie orange pad and yellow fine cut polish but its taking an age to remove. i also tried 2500 wet sand in a test corner (after watching your stonechip repair video) but did see the white milky liquid so i stopped and polished and it looks okay.
do i keep polishing but with more pressure.. or try a heavy cut (a little nervous of this)
Volatile organic compounds. I think California has a similar idea on chemicals in the US, I believe, I'm sure someone will correct me. I think California state has very specific chemical policy on what can be allowed in certain products.
Thanks for the video John. Right on time! I’m looking for a single stage or AIO polish to do my 2011 Giulietta. I’ve seen your videos about Scholl S20 black, Angelwax Regenerate and this now? I’m all confused as to which product and pad combo to go for along with my DA. Time is the big factor for me and then price obviously.
What do you recommend? Not sure how Giulietta’s paint would react to Scholl as loads of reviews are for German hard paint.
I have swirls in my paint again.
I originally used a fine polish and prep/ decon with good results before using infinity wax synergy lite , I use safe wash methods and have been recently using DIY detail rinseless wash .
Can I safely use a ultra fine polish again like S40 or should I not polish again , also can you recommend a hard ceramic coat more resistant to wash maring and swirls as I don’t want to reapply coating every 3 months 🤦🏻♂️
I think it's 3D ONE in a different bottle it's okay. Have you tried 3D POXY... OMG one of the most satisfying wax/sealers to wipe off.
They are not the same product in different bottles.
Yeah, i like your way of thinking there, on value. As a gamer, players are always looking for the META, Most Efficient Tactic Available. Detailers are looking for that as well, only we include value into the meta calculation. What value is this adding to my washing method, polishing, drying? We don't mind paying a bit more for things that add that value, that give us time back, that reduce marring, but if its just more expensive cause marketing cost money, then its a harder 2nd sale
Nice video and advice.
The forced da will get alot better results than a normal free spinning da, any chance doing another video with 3d speed on a free spinning one.
See if you can do a side comparison of koch chemie p601 im sure koch chemie will cut alot harder but i really like the lid on hd speed one to order very soon Thanks
we have done this comparison on the best AIO video.
Hey John please please please please try mirch bead king I Found it fantastic order from Australia takes a week to come please can you do a video please
Hi there again. I have another question, because I’m not pro detailed Just a normal person. Do you think is any sense on 17 years old car do hard cutting first and then try to fix almost the issues like stone chips scratches etc? To be fair it’s great moment for me to learn before I change car, plus if I do this I could see what’s left to fix otherwise I don’t know now what will be disappearing what not. Greetings, Tom.
you will make the stone chips worse. dont trust instagram videos showing flawless touchups. they are just showing the results at certain angles or distance to make them look flawless. with touch ups just to them quick, fill a few times to make a crown and flatten back to smooth and then cut and finish. or just touch up and buff :)
How do you order supplies from 3d products
in2detailing or 3d uk mate. google search should find it all
How does it compare to Rupes AIO?
It’s good stuff
Hi john, can you remind me what polisher machine you use I’m thinking of buying one and cordless and I want to know what the best reasonably price for a person that only cleanens his car and his neighbours car is so preferably under £200
flex XCE cordless mate.. this is expsnive get like a DA8 or das6 pro as first polisher m8
Is it still a hard to find in the UK yank brand. Was hard work 6-9 months ago. Gave up trying buy some 3D product. Sadly as I’d like use some. Not into AIO. Don’t quite know why. Rather cut and quick hand paste wax over be done. On a rough car to start. A budget cheapy £1999-2999 city car
not hard to buy. theres a 3d UK site and imran stocks a lot of it at In2detailing.
@@ForensicDetailing aha thanks Jon
How does this compare to Griots garage finishing sealant?
its not really the same sort of product mate this is an abrasive AIO.
@@ForensicDetailing Griot claims it could be used as a AIO, it has a small about of diminishing abrasives.
What’s it like on very hard Mercedes paint?
if your covered in deep swirls then this AIO on merc paint might not be as good as a heavy cut followed by a finish. but that always goes without saying of any AIO.
Just had 2 stage correction done so was thinking more for future maintenance.. looking to invest in a cordless da polisher, leaning towards Milwaukee m18 15mm.. you had any experience with it Jon?(see you have the dewalt)@@ForensicDetailing
👍 Spice Girls humor 👀
I’m always bringing over Touchless, nearest supplier for me is Carzilla in Canada.
I don’t like it full of fillers
29:54 Allah? 😉
Allah 🤔🙄🤮