Fixing The Oil Pressure Complains BMW F10 N55
HTML-код
- Опубликовано: 7 фев 2025
- Part 1 : • BMW F10 N55 Oil Pressu...
Part 2 : • ULTIMATE Guide For Cha...
Engine Oil Pressure Diagnostic Tester Tool : amzn.to/3dVCyhO
After cleaning the oil pump , the oil pan , the oil suction pipe and changing the conrod bearings , is time to see , what is going to be the oil pressure . The car that we are working on : BMW F10 535i N55 .
Support the channel : / crankauto
Shop coordinates ( for business inquiries ) : / crankauto
CRANK
Nice video guys! Keep up the great work! Dutch regards, Nico.
Good video my friend, we just changed turbo on N47 F11 and autel scan tool showed pressure at 9 bar!!!! Real pressure was 3.5 bar, the autel and launch both told lies!!! Cheers sandy
Thanks Sandy ! Yes there is some false reading through the scan tools on this N47 / N57 engines . I remember I checked ones , on a good known BMW N57 engine , the oil pressure for reference , but ones again it showed 9 bars . Actually 3.5 bars sounds little bit high . Were the engine fully warmed up ?
Excellent work boys, keep it up 👍
My 2012 the oil pressure release valve stuck open
Hi, what is the idle oil pressure specification for a N57 engine, on a warmed up engine?
Many thanks
what adapter do i need to use to check the pressure? m12 doesnt fit
Low oil engine code ??
What do you do with the engine timing?
I see that the oil pump sprocket is suspended by the chain. Do you have to time it after you install back the pump?
Thanks for the video by the way….
Its not on the main timing chain so there is no timing to worry about
@CRANK Very good video!
I have a question though.
My F10 N55 shows exactly 1.5 bar on operating temperature and mechanic says that oil pump should be changed because pressure must be 2.5 bars.
1.5 is okay or I still need to changethe pump?
I'm showing that the specification is 1.5 bars, so I guess this answers the question
The mechanic is right. It should be at least 2.5 bars which is 36 psi. 1.5 bars is only 21 psi. That car is going to keep throwing the low oil pressure warning light. I would really appreciate if you could tell me how you fixed your car coz I have the same problem with my 2013 bmw X5.
Поучително видео както винаги :) каква програма ползваш за информация и параметри?
Мерси ! На BMW TIS-овете в интернет ровя обикновенно . Когато става дума за по сериозен ремонт , си плащам в michell за 1 автомобил и там си ровя за информацията която ми трябва
Изрязване на дпф програмно и физически на мазда 6 дизел 2.0 rf7j 2007 г. колко струва услугата?
300 software + 100-200 hardware ( в зависимост колко е труден за сваляне )
@@crank3646 an4o111@gmail.com къде се намирате ?
Нещо не успях да им хвана сагата на тия БМВ-та и ремонта доста се е удължил... особено Е60
1C0101 Engine Oil Pressure Control, plausibility, static: Pressure too high
What’s that mean?
Hey did you figure this out i have a car thats giving this code cant find anything on it
@@XJaysznX There was a damage to one of the electric wires of the engine and it was discovered and repaired in a BMW workshop
Да ти имам английския 😂😂😂😂😂😂😂😂
ahahahahhahaa