Great restoration ! ps : I remember this badass brass knuckles blow gun being engineered by ToT as a collab with Jimmy ! And now you own it ? Boy, do I love RUclips ! 😎✌️
It use to break the hearts of us old letterpress printers in the middle of the last century to see so many old letterpress machines of all types and sizes being hauled off to the scrap heaps. They were amazing creations! Offset printing technology was so wonderful, but it didn't have the "personality" of letterpress. Like my grandfather who was a railroad engineer on the old steam engines. He hated it when they were scrapped for the new diesel engines, as nice and efficient and shiny as those new engines
Awesome restoration! Pretty amazing that you didn't have to fabricate or replace any parts, only some minor repairs. Just needed a good cleaning. Thanks for sharing!
Wow...! It's fantastic to see these old machines come back to life and be put to practical use again. Very well done Sir! Greetings from Southport UK. Beeindruckend...! Es ist fantastisch zu sehen, wie diese alten Maschinen wieder zum Leben erweckt und wieder in die Praxis umgesetzt werden. Sehr gut gemacht, Sir! Grüße aus Southport UK.
I remember using a more modern version in Junior High, we used lead type and set it in the frame just like you did with the wooden block. And we made business cards to make money for stuff at the shop, good memories and great job, enjoy!
In school Ours was a two man operation. One feeder and one to push the bar down and keeping moving..someone stole the motor. And the district was so poor they couldn't even buy the damn thing..
Nice job. Nice press. German? Been there; done that - many times over the years. I'm about to begin restoration of an old 8x12 Chandler & Price myself. Began printing with these presses back when I was a boy. Got my first 8x12 when I was 14. Now I'm 70 and spend most of my time printing on or restoring and making parts for these old presses - mostly the smaller Kelseys, etc, but I do have 5 C&Ps that have been sitting in the barn for too long. They have been rescued from the scrap yard and safely stored for years. Now it's time to put them back into shape, then find them loving homes where they can begin printing again!
Hallo Hassan Bin immer wieder erstaunt 😲 wie so alte Maschinen funktionieren und gebaut sind. Und natürlich wie robust, fast für die Ewigkeit. Super Maschine klasse Arbeit. 👍 👍 👍 Liebe Grüße Martin 🙋♂️
Nice job. I remember learning to use one of these when I did my printing apprenticeship a long time ago. Our TAFE teacher called it the finger slammer. A really talented operator could put the page in with one hand and take it out with the other on every impression. A really slow operator would end up one handed
Been printing for 30 years from letter head to sheetfed to now digital. When it came to "restoring" on those old ones, we used to say just wipe it down and grease it..theres only so much you can do on those old Bastards.
Eine wirklich tolle Restauration. Der Schraubendreher sah genau so alt aus wie die Druckerpresse. Ich bin auf deine Drucke gespannt. Danke fürs Zeigen Gruß Sascha
Nice work - I was a little worried when you started hitting the ink disc and plattens with a power tool, but you were being really careful, with soft abrasives.
Felicitaciones por el restauración, trabajé en una máquina similar a esa hace muchos años.... por estos lados (Uruguay) eran conocidas como Minervas manuales. Recuerda, lo blanco, lo no imprimible, está bastante más bajo que la altura tipográfica (23,3 mm), la escuadra del papel con tres puntos de apoyo enfrentada a la mano hábil alcanza. el molde o clissé debería ser acuñado precisamente con cuñas desplazables (2) enfrentadas a la escuadra del papel. Por último, el material de blanco en las escuadra del molde de no moverse nos asegura un buen registro del impreso.
We had a letter press section yrs ago using Victoria hand feds there was an auto vic machine with an automatic feeder on rails that rolled upto the machine I couldn't do that work now Im abit to old.
Hi Habu !Die Druckmaschine sieht jetzt aus wie neu!Respekt!Ich sage nur "ein Herz für Maschinen" Ich wünsche dir viel Spaß damit!😎🤘Gruß #bulatsschmiede
Hi! Your film is so vital for my thesis, in which I restore and drive by engine similar letterpress machine. Can you help me and tell, what engine did you use here? How much is the engine power etc.? Thank you! 😀
Woher nimmst du nur die Geduld und das Wissen.Und sag jetzt bitte nicht:“Einfach machen“ Einfach ist was anderes 😂😉 Ich bin wirklich sehr beeindruckt. Grandios‼️
Wirklich cool, war das für ein Museum oder steht die jetzt bei dir im Wohnzimmer und deine Frau/ Freundin/ Freund/ Mann/ whoever darf sich immer darüber beschweren XD
![1870s Circular Sock Knitting Machine [Restoration]](http://i.ytimg.com/vi/rAFlLEoFilM/mqdefault.jpg)
Great restoration ! ps : I remember this badass brass knuckles blow gun being engineered by ToT as a collab with Jimmy ! And now you own it ? Boy, do I love RUclips ! 😎✌️
Thanks Buddy! Yeah I got from Jimmy, and it’s absolutely amazing! 😊🤘🏽🤘🏽
It use to break the hearts of us old letterpress printers in the middle of the last century to see so many old letterpress machines of all types and sizes being hauled off to the scrap heaps. They were amazing creations! Offset printing technology was so wonderful, but it didn't have the "personality" of letterpress. Like my grandfather who was a railroad engineer on the old steam engines. He hated it when they were scrapped for the new diesel engines, as nice and efficient and shiny as those new engines
Обстоятельный мужчина! Толковый МАСТЕР!!! Можно смотреть бесконечно, как на воду, огонь и чужую работу )))
A wonderful machine that works in a beautiful way
Nice job. I like the air gun.
Thank you
Awesome work on restoring this old machine, well done. Regards, Gerry
Thank you!
Awesome restoration! Pretty amazing that you didn't have to fabricate or replace any parts, only some minor repairs. Just needed a good cleaning. Thanks for sharing!
Thank you 😉
Wow...! It's fantastic to see these old machines come back to life and be put to practical use again. Very well done Sir! Greetings from Southport UK.
Beeindruckend...! Es ist fantastisch zu sehen, wie diese alten Maschinen wieder zum Leben erweckt und wieder in die Praxis umgesetzt werden. Sehr gut gemacht, Sir! Grüße aus Southport UK.
Thank you very much 😎🤙🏼
Thank you for not needlessly removing every single screw and breaking this down into 8000 pieces...
I remember using a more modern version in Junior High, we used lead type and set it in the frame just like you did with the wooden block. And we made business cards to make money for stuff at the shop, good memories and great job, enjoy!
In school Ours was a two man operation. One feeder and one to push the bar down and keeping moving..someone stole the motor. And the district was so poor they couldn't even buy the damn thing..
You were possibly using an Adana or Excelsior, 8x5 in both cases
Beautiful old machine they don't make em like that any more, well done on the restoration.
Thank you!
It's so satisfying how well metal cleans up, and to see the flowing motion of a one machine like that moving is just epic!
It's a pleasure to see how you work and that these old machines work again!!
Thank you!
Great job. I learned printing kn one of these back in the 60s. I made a career in printing for the next 40 years.
Nice job. Nice press. German? Been there; done that - many times over the years. I'm about to begin restoration of an old 8x12 Chandler & Price myself. Began printing with these presses back when I was a boy. Got my first 8x12 when I was 14. Now I'm 70 and spend most of my time printing on or restoring and making parts for these old presses - mostly the smaller Kelseys, etc, but I do have 5 C&Ps that have been sitting in the barn for too long. They have been rescued from the scrap yard and safely stored for years. Now it's time to put them back into shape, then find them loving homes where they can begin printing again!
Nicely done, my friend!
Hallo Hassan
Bin immer wieder erstaunt 😲 wie so alte Maschinen funktionieren und gebaut sind. Und natürlich wie robust, fast für die Ewigkeit. Super Maschine klasse Arbeit. 👍 👍 👍 Liebe Grüße Martin 🙋♂️
Dankeschön 😎🤙🏼
Nice job.
I remember learning to use one of these when I did my printing apprenticeship a long time ago.
Our TAFE teacher called it the finger slammer.
A really talented operator could put the page in with one hand and take it out with the other on every impression.
A really slow operator would end up one handed
Super start for 2020! Keep your eyes 👀 open and watch your fingers!! 👏🏻👏🏻👍🏻
Thank you very much!
Been printing for 30 years from letter head to sheetfed to now digital. When it came to "restoring" on those old ones, we used to say just wipe it down and grease it..theres only so much you can do on those old Bastards.
Eine wirklich tolle Restauration. Der Schraubendreher sah genau so alt aus wie die Druckerpresse. Ich bin auf deine Drucke gespannt.
Danke fürs Zeigen
Gruß Sascha
Dankeschön Sascha 😎🤙🏼
Hey Baby, very nice. What a fund.. good luck with it..
Amazing job! You have some serious skills! Wish you could restore mine! I won't be able to do near that nice of a job! Kudos!
Schöne Maschine und auch sehr schön wieder zum Leben erweckt. 🖤🖤🖤
Dankeschön 😎🤙🏼
wow - ich weis wie viel arbeit bei solchen restaurationen drinstecken - beachtlich wie sauber sie wieder läuft - grüße vom federl. 👍🤘😎💚🍺🖖
Dankeschön 😎🤙🏼
Nice work - I was a little worried when you started hitting the ink disc and plattens with a power tool, but you were being really careful, with soft abrasives.
What a wonderful machine. Thanks for sharing. 🙏
Thank you😎
Fascinating to watch the process. Thanks for the video!.
This machine doesn't really win the award for safety lol. Nice looking piece of equipment 👍🏻
Thank you😉
Super! wie kommt man denn an so eine wunderschöne Maschine!
Schön, daß sie wieder zum Leben erweckt ist.
Gruß Gernot
Dankeschön 😁
Wunderschön anzusehen... und vor allem sehr entspannend.
Hi Habu 👋👋👋 very very good restoration 👍👍👍💣🔥👌🏽
Thank you 😎🤙🏼
Sehr schön.... super Arbeit. Daumen hoch!
Danke 😁
Ha ha ha!!!! The compressor brass knuckles is a nice touch.
Danke fürs Bewahren des technisch kulturellen Erbes....
What an awesome machine and an absolute blast to see getting it back to life! Looking forward to some posters man 😎
Thank you very much 😎
Nice, it is somehow relaxing to watch this machine 😁
Thank you!
Satisfying sound it makes
😉🤙🏼
Moin Hassan, saubere Arbeit.
Immer wieder schön dir zuzusehen.
Gruß aus Rheinhessen
Dankeschön 😉
Absolutely amazing!! 👏👏👏
Thank you!
Beautiful job - congrats!
oh that's great, perfect result
Thank you!
good job
Thank you!
That's actually pretty cool
Thank you
Très jolie restauration .👍👏
Merci
Felicitaciones por el restauración, trabajé en una máquina similar a esa hace muchos años.... por estos lados (Uruguay) eran conocidas como Minervas manuales. Recuerda, lo blanco, lo no imprimible, está bastante más bajo que la altura tipográfica (23,3 mm), la escuadra del papel con tres puntos de apoyo enfrentada a la mano hábil alcanza. el molde o clissé debería ser acuñado precisamente con cuñas desplazables (2) enfrentadas a la escuadra del papel. Por último, el material de blanco en las escuadra del molde de no moverse nos asegura un buen registro del impreso.
Très belles restauration .
Merci😁
voll geil!🍀🍀🍀
Danke 😎😎
Nice and smooth! ❤😎🤙
Yes 😁🤙🏼
Irgendwie hätt ich da Angst um meine Finger 😉 Sieht gut restauriert aus, jetzt bist du auch Teil der "Printing Press Maker" 😁👍
Dankeschön 😜🤙🏼
Coole Sache, bin gespannt wann die erste Zeitung kommt😀
Danke 😁
Awesome work! 😃👍🏻👊🏻
Thanks!😁
WoW 🤩 amazing machine!
Thank you 😉
Excellent
Thanks😉
We had a letter press section yrs ago using Victoria hand feds there was an auto vic machine with an automatic feeder on rails that rolled upto the machine I couldn't do that work now Im abit to old.
What are the two rotary tool you are using? And what are those attachement?
Beautiful restore by the way 👌
Sensational master 🙏👏👏👏
Thank you 😉
Super cool!
😎🤙🏼
شكرا على المجهود الرائع عمل رائع
Hi this is a beautiful process! May I ask where you found the leather belt, I have a 12x18 C&P
Liebe es, vielen Dank!
Like your air hose nozzle. Wonder where you got that?
Sempre perfeito, amigo. parabéns!!! São Paulo/Brasil
Nice job.
Good video. 👽
Thank you 😉
Awesome! Subscribed
Nice machine
Thanks!
Hi Habu !Die Druckmaschine sieht jetzt aus wie neu!Respekt!Ich sage nur "ein Herz für Maschinen" Ich wünsche dir viel Spaß damit!😎🤘Gruß #bulatsschmiede
Dankeschön 😎🤙🏼
Bravo!
Hi, would be really interested in what Hp your motor is? and the width of your fly wheel and leather belt? wondering i can modify mine like this :-)
i am try to find video that show all machine desasembed, show all part ssplit off. for undesntand how this machine word.
Hi! Your film is so vital for my thesis, in which I restore and drive by engine similar letterpress machine. Can you help me and tell, what engine did you use here? How much is the engine power etc.? Thank you! 😀
👍👍👍👍👍
Erster... 😂.... Geniale Maschinen hats dazumals schon gegeben... 👍
😜🤙🏼
Salut habu tu la bien remis en état bravo 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Merci 🤙🏼
So geil!
Was würde ich nicht alles für so eine geile Druck Maschine geben!
Gruß von meinem Kanal,
Tobi
Dankeschön 😉
Einfach Super Hassan! Love it 😍😍😍✅🤙🏻
Dankeschön 😎🤙🏼
Woher nimmst du nur die Geduld und das Wissen.Und sag jetzt bitte nicht:“Einfach machen“ Einfach ist was anderes 😂😉 Ich bin wirklich sehr beeindruckt. Grandios‼️
Danke ❤️
🇧🇷👍 parabéns Congratulations 🇧🇷👍
Big job 👍👏🇧🇷
i want this machine what i do
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
You take this one at series ''un village français''. LOL
Cool🤗🤗
😎🤙🏼
I used a Kluge during the summer of 1969.
Hi
Mit was hast du den Rost geschliffen?
Wd40
Great!
Thanks
Und das alles ohne Internet.😎👍
😎🤙🏼
Wirklich cool, war das für ein Museum oder steht die jetzt bei dir im Wohnzimmer und deine Frau/ Freundin/ Freund/ Mann/ whoever darf sich immer darüber beschweren XD
Haha nein die steht bei mir in der Werkstatt 😅
👍
Класс!!!!
Total Geil :-)
Danke!
When did Diresta get all tat'ed up?? Oh wait . . .
From the thumbnail I thought the project was an old wheelchair that a vehicle ran over it once or twice.
Podle zvuku bych řekl že si to dělal někde v tiskárně
Jetzt kannst du wie jimy diresta deine eigenen Plakate drucken
😎🤙🏼
Not that shabby.
Erster!
Glaub ich nicht 😂
😂
Master Anonymos 😂 O.K. Dann halt zweiter.😉
@@HerrBlei ich wage mich nicht mit dir zu streiten, Herr Blei 😂 sagen wir exaequo 😅
Ich denke nicht, dass es darum geht, so zu sein, wie jimmy.
О, хоть первый раз вижу но с самого начала видео интуиция меня не подвела что это печатный старинный станок.
Not as fast as a Web Press.