FCX24 / SCX24 - Fill Your Shocks W/ Oil! A simple mod to make your Monster Truck or Crawler Perform!
HTML-код
- Опубликовано: 27 авг 2024
- The Max Smasher gets it's shocks filled with oil. This pretty much applies to all shocks that have o-rings to hold oil.
A note about the o-ring placement. We first added one of the o-ring to the inside shaft (inside the barrel) but changed our mind and thought the double o-ring inside the cap might be better. The one added to the inside of the shock will just end up at the top of the shock shaft as the shock compresses. It will not stay tight down at the bottom of the barrel where oil will leak out as the shock compresses. However, while the shock is fully extended the o-ring will help seal the inside of the barrel but again, as it compresses, it will stay at the top of the shaft. The bottom most o-ring should help seal the bottom as it compresses. If you find your shocks to be leaking, switch where your o-rings are. With our double o-ring on the bottom, we have not yet seen any leakage.
#fcx24 #FCXAdventures #fmsmodel @fmsmodelRC @fairrc
Purchasing from these links really helps support the channel!!
In this video:
FMS 1/24 FCX24 Max Smasher RC Truck RTR: www.fairrc.com...
FK-180PH DC 6V-12V High Speed 20mm Mini Electric Motor: ebay.us/rHqMkG or ebay.us/jl8fcJ
TEAM LOSI RACING Shock Oil: amzn.to/3Nr61TM
All the FCXC24 parts offered so far: www.fairrc.com...
We now have shirts and stuff! Find it all here: my-store-42672...
Bench Gear:
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Recording Gear:
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ
Camera Stand 4: amzn.to/36xhSib
70 LED Video Light with Adjustable Tripod Stand / Color Filters, Obeamiu 5600K USB Studio Lighting: amzn.to/3lK56Rq
I did mine differently. instead of 2 orings on a single side I added 1 inside the shock and 1 outside (not 2) where you were describing in the vid. so far so good
The one you added to the inside of the shock will just end up at the top of the shock shaft as the shock compresses. It will not stay tight down at the bottom of the barrel where oil will leak out. We did this at first but thought the double o-ring inside the cap might be better. I guess while the shock is fully extended the o-ring will help seal the inside of the barrel but again, as it compresses, it will stay at the top of the shaft.
I went ahead and added a note about this in the video description as what you point out may also work for some. We haven't seen any leakage yet, but if it does, we will switch. Let me know if you see anything leak on yours.
@@TheShopMiniRC yeah...when I was doing it, I took a total guess at how it was supposed to go lol just seemed strange to have 8 tiny rings.
Just did this on mine yesterday. Took a bit longer than 15 minutes, but was also replacing my lower links at the same time. Huge difference driving, much smoother bouncing down rocks.
Yes, it is SO much better for sure!
Ordered it on the 29th will add oil when it comes💯👊🤙
So much more smooth!
Need to do the shocks. Thanks for the tips
It definitely makes it ride better!
The bag comes with 4 metal washers, what are they for?
Hmm actually not sure. Maybe spacers of
some kind?
I'm still pretty new to 24th scale crawlers/bashers but I sure am glad I joined the hobby at the time of all these oil filled options on the market. Since going oil filled I don't think I'd be able to go back to friction.
I have the Injora 39mm oil shocks on my scx24 based bouncer and they've been working great. Their springs are too stiff and didn't dampen enough for my crawler but they've be performing great for bashing.
Which motor do you have in that MS? I've been looking around for decent and cheap 3s capable 130/180 motors to mess around with.
For sure!! It’s a great time. This monster truck is literally a box stock FCX24. We haven’t messed much with 3s brushed motors.
@@TheShopMiniRC I had a 130 motor that came with a bangood special 1/28 drift that I ran in my SCX on 3s and that thing really got moving. Motor got a bit hot but wasn't too bad. I'm trying 3s on a Rocket 1410 right now to see how long it lasts lol
I put the o’ring on the bottom and inside of the cap on my Hot Racing shocks. Dropped from a foot it doesn’t bounce at all with 40wt Losi.
Nice!
I put green slime on them O Rings before I put the cap on
That's a damn good idea!
night and day difference ....i always got the add oil process down by the time i get to the LAST shock.
takes some practice lol
Appreciate you sharing,
Thanks for watching! You are awesome!
Is olive oil viable??
You can, just be aware the the temperature will affect its viscosity a lot. If it’s cold it’s going to thicken up.
Used to be more like that until RTR's came along...
Yeah, I get that. We need to make sure new people can learn.
How's that motor compared to the FMS Speed motor?
We haven’t tried the speed motor yet but I hear that the speed motor has just a little more pep.
20/50 motor oil works just as good ....lol...I'm running no springs on 100w silicone shock oil....perfecto...
Great point!
What weight shock oil would you recommend?
Like 100-150cst or 15wt
Ok
Very ok!