Tacoma MBRP Exhaust Install & Test Drive
HTML-код
- Опубликовано: 5 дек 2018
- My new Tacoma MBRP exhaust install and test drive. This install almost knocked me out! Is the MBRP exhaust difficult to install and is it any good?
▬▬▬▬▬▬▬▬▬▬▬▬▬
To purchase channel stickers or patches, drop me an email at robmotive@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬
RobMotive Merch: teespring.com/stores/robmotiv...
▬▬▬▬▬▬▬▬▬▬▬▬▬
INEXPENSIVE TACOMA MODS & MUST HAVES (#ComissionsEarned)
As an Amazon Associate I earn from qualifying purchases
▬▬▬▬▬▬▬▬▬▬▬▬▬
Seat Gap Organizer amzn.to/30g8f21
Tacoma Glove Box Organizer amzn.to/2QmBdK9
Tacoma Center Console Tray amzn.to/2ObAyZf
Seat Back Hook (4pk) amzn.to/2LHIEqR
Bungee Cord (24 pc) 10”,18”,24”,32”,40” amzn.to/2LFbS9E
Work Gloves amzn.to/31DLbb3
Tire Pressure Gauge (5-50Lb) amzn.to/2Oftzyk
Registration/Insurance Card Holder (2Pk) amzn.to/351VrMe
Scosche Magnetic/Suction Phone Holder amzn.to/30HH1xm
TOOLS USED ON THE CHANNEL
(#ComissionsEarned)
As an Amazon Associate I earn from qualifying purchases
▬▬▬▬▬▬▬▬▬▬▬▬▬
Trim removal tools: amzn.to/2Ypf9lG
Craftsman 10 PC 6 Pt. 3/8 in Metric Socket set: amzn.to/2yLeeMR
Craftsman 10 PC 6 pt. 3/8 in Standard Socket Set: amzn.to/2YKjWJE
Craftsman 18 pc. 12 pt. Deep, 3/8 in. Socket Set - Metric & Standard: amzn.to/33aN1kS
SOCKET EXTENSION SET/1 ¾-3-6-8” EXTENSIONS amzn.to/2Q5eodx
Craftsman 52 WRENCH SET COMBO METRIC AND SAE: amzn.to/31n9KZs
Magnetic Screwdriver Set 10 PCS 5 Phillips and 5 Flat Head: amzn.to/31jbt1B
Bosch Power Tools Drill Kit DDB181-02 - 18V Cordless Drill/Driver Tool Set with 2 Lithium Ion Batteries, 18 Volt Charger, & Soft Carry Contractor Bag: amzn.to/2YrjlkW
DEWALT DCF887D2 20V MAX XR Li-ion 2.0 Ah Brushless 0.25" 3-Speed Impact Driver Kit: amzn.to/2GM8zuI
Bayco SL-450 Metal Shield Incandescent Utility Light with Grounded Receptacle on 20 Foot Retractable Reel: amzn.to/2YKmeIK
30Ft Retractable Extension Cord Reel with 3 Electrical Power: amzn.to/2YKmB66
Stanley 10-099 6 in Classic 99 Retractable Utility Knife: amzn.to/2YFMeVz
Needlenose Plier: amzn.to/31nFGMX
Channellock 6-Inch Slip Joint Pliers | Utility Plier with Wire Cutter: amzn.to/2YHQIuT
Wire Stripper 10-22 AWG, Wire Crimper: amzn.to/2Te2bkU
TAPES USED ON THE CHANNEL
(#ComissionsEarned)
As an Amazon Associate I earn from qualifying purchases
▬▬▬▬▬▬▬▬▬▬▬▬▬
3M Temflex Vinyl Electrical Tape, 3/4 in x 60 ft, Black (3-Roll): amzn.to/2yH3Vtw
3M Scotch Extreme Mounting Tape, 1 by 60-Inch, Black: amzn.to/2GNtmOy
Gorilla Tough & Clear Double Sided Mounting Tape, 1 Inch x 60 Inches, Clear: amzn.to/2Kgpmb8
3 Pack 1.88 Inch Blue Painters Tape, Medium Adhesive That Sticks Well but Leaves No Residue Behind, 60 Yards Length, 3 Rolls, 180 Total Yards: amzn.to/33ci13Z
CLEANING SUPPLIES USED
(#ComissionsEarned)
As an Amazon Associate I earn from qualifying purchases
▬▬▬▬▬▬▬▬▬▬▬▬▬
Car wash: amzn.to/2YG5baL
Micro fiber towels: amzn.to/2GM3T7M
Best Carnuba wax: amzn.to/2GKeTmo
Waxing pads: amzn.to/2KdPUKd
Tire Foam shine: amzn.to/2GLwcDy
5-Gal bucket: amzn.to/2GNcuaB
Car wash mitt: amzn.to/2YJzvVW
Cotton drying towels: amzn.to/2YD6SFP
CAMERA EQUIPMENT USED ON THE CHANNEL
(#ComissionsEarned)
As an Amazon Associate I earn from qualifying purchases
▬▬▬▬▬▬▬▬▬▬▬▬▬
Canon G7x Camera: amzn.to/2NluCML
GoPro Hero 7 Black: amzn.to/2Zhsw6N
Canon EOS M50 Camera: amzn.to/2zat7bX
Rhodes VideoMic: amzn.to/2KKhVt5
Joby Tripod: amzn.to/31S1i4o
Tripod, 60”: amzn.to/31US33I
Joby Camera Suction mount: amzn.to/31Pa9Uw
(#ComissionsEarned)
As an Amazon Associate I earn from qualifying purchases
▬▬▬▬▬▬▬▬▬▬▬▬▬
DISCOUNT CODES FOR YOU
Sparksparts.com 5% Off Discount code ►RobMotive
TUFSKINZ.com 10% Off Discount code ►RobMotive10
▬▬▬▬▬▬▬▬▬▬▬▬▬
BECOME A PATRON ► / robmotive
INSTAGRAM ►robmotive
TWITTER ►Robmotive
▬▬▬▬▬▬▬▬▬▬▬▬▬
TO SEND COOL STUFF (If you want):
RobMotive
P.O. Box 531390
Harlingen, TX 78553
Thanks for watching RobMotive
#toyota #trdpro #trd #tundra #toyotatundra #2019tundra #2020tundra #2020toyotatundra #2019toyotatundra #trdpro #trdprotundra - Авто/Мото
Thanks. I just got my all black one. Great lift btw.
Thanks 👍
Good job Rob. It sounds a lot better. Like the black tip also.
Yup! I like it. Had to have the black tip. Much better than just the pipe or chrome👍
Just put an MBRP XP cat back on my 10 Ranger Sport 4.0
I love the tone and growl. Puts the 'sport' in my Sport.
Awesome- not too much- perfect. If I could only convince myself to replace my brand new exhaust with a brand new one
Lol! You’ve gotta pay to play👍
New subscriber! Great vids man! Hope to do some mods to my 18 trd sport soon.
Hey Mike! Welcome to the channel and thanks for the sub👍. Lots of options to mod the Taco for sure👍
Great video, I really was considering doing this mod as well but I am seriously considering getting the Magnuson Supercharger for the Tacoma when they are supposedly to release their supercharger 1st quarter next year and if it’ is the same requirements as they have for the 4Runner Warranty. They don’t allow any modifications to the exhaust, airflow kits, cam modifications and so on. So I’ll have to wait to see what their warranty requirements are before I attempt this mod.
Sounds pretty good to me.
Good job rob👍
Thanks Garner!!!!👍
When you swap out the TRD exhaust for trading it in the torque specs for the flange bolts is 46 ft. lbs.
Great info!! Thanks thanks👍
Have you worked on any 3rd gen 2.7L tacomas. Was wondering if the exhaust plumbing was similar enough to use this kit on a 2.7L....thanks
I haven’t. Can’t imagine it would be different...but I don’t know🤔
Great video Rob. Hope you enjoy the exhaust on your tacoma as much as I do on mine! much love from hawaii!
Thanks Charles. I love the new sound. 👍
Nicely done, I wonder how it would be when its time to smog it. Do you have to put the old muffler back on?
It is a bona fide muffler so I would think not. But I’ll defer to someone who has had experience with aftermarket smog checks🤔
I gotta admit, i did put mine on upside down. Had it like that for 2 days. Made the cabin vibrate. Went back flipped it around and problem fixed. Taking it off after it was installed sucked really bad haha. should post a video of what ive done to my truck?
That’s a drag!! I thought of that while I was doing mine! I’d hate to take mine off after just putting it on! Sure...post it up👍
ROB I want to be just like you when I get a old. Living the life
Lol!! Old!! What??
Haha my bad Rob. I’m getting a Tacoma soon SR5 crew cab 4wd.
Might want to rethink that!! Seems all the “old” guys are driving Taco’s😁
Rob, what about installing the MBRP 3" Cat Back, Turn Down, T409, Toyota Tacoma 3.5L 2016 - 2020. Looks like that may allow you to stuff the 285 in the spare tire location.
Could be an option..but I love the TRD exhaust I have🤔
What tip did you go with rob?
Hey Rob,,it’s 10 * here today! Figured it’s a good day to watch some of your old Videos. Ever miss this Truck?
Well thanks Charles! With the exception of just a few, I miss all of my previous trucks😬
No soldering?So the piece Where you stick in the muffler into the tube pipe in .Or does it fit like a glove
Like a glove and with a clamp👍
Why did you go with the MBRP over all the other brand specifically the TRD Exhaust?
I’ve had the TRD exhaust and honestly it’s too quiet. Not much of a sound difference. The MBRP sounded the most aggressive to me without being overbearing. Also pretty much a simple bolt on install. 👍
The benefits of having a at home lift ;),
Those muscles rob 👌 I couldn’t break mine loose 😂, great video rob 🤙 mbrp all day 😎👍 smashed the like button my friend
That lift is awesome! Pretty simple install and great sound! I don’t think my cut on the front pipe was nearly as straight as yours!!👍
@@RobMotive -- When possible try and loosen the nut, its easier to loosen then the bolt head
Good tip!!!! While that makes perfect sense...I never thought of it👍
The taco got a voice. I like that it’s not to throaty. It’s definitely a v6 sound. You did a great job. My hat goes out to you sir. 👊
Finally! There are a lot of choices out there!! Pretty easy install and great sound 👍
Let us know how it feels with 3in exhaust. Some people say that it starves the back pressure for scavenging. Also just trim the pipe a bit more and it should clear that part in the back
All is good so far👍
what lift do you have?
Sounds sweet and an easy install by the looks of it
Yup! Not too bad👍
Hey Rob, is the MBRP suppose to increase the horsepower compared to the stock exhaust, just curious because there is less restriction?
There are claims that it will do so. However I think the only place you could tell is on a dyno. Very hard the notice incremental increases otherwise.
Hey Rob would you say the MBRP exhaust be a road trip problem, because of the sound and drone?
For me, yes. However, we all have different tolerances so it's really an individual thing🤔
Pair that with a cold air intake and it will perform way better. No leaks? Was curious if I would need to get a new gasket as I have about 23000 miles and I live in the north east where rust is not your friend. 🤔
With that many miles, I would get a new gasket👍
My tip is light brown.
Sounds nice,hell of a lot better than the stock!!has a nice pitch,not so much that it's annoying!!Good job brother, love your channel!✌
Thanks John. Much better sound IMO! 👍
What do you think of the cab drone? I put it in today and it’s pretty loud in the cab and wonder if there’s a way to quiet that part down a little
Only remedy would be sound deadening.
Rob where did you purchase this exhaust from. Do you have a link or at least a part number or price?
Hey James. I purchased it off Amazon. Just search MBRP S5338P 3” Cat Back. If you want the tip part number it’s in this video: ruclips.net/video/abgjVffxFms/видео.html
does this exhaust leak a lot? Do having a leak, or no exhaust... can it damage the engine because no back pressure 🤔?
No.👍
Sounds good !
Would you say that the 4 door/short bed is the same length as the access cab pickup?
Yes 👍
Cool! I’m doing this install this afternoon!
Nice , sounds good 👌
Thanks 👍
Nice
👍
Which model MBRP did you go with? Also did they have options for increased pipe size?
It’s part #S5338P. The pipe size for mine is 3”. Not sure if there have any larger🤔
ThrobbNation 3” would be great. I see that they offer duel exhaust. I wonder if there is a difference in tone.
By the way. Love the channel! Thanks for creating the content you do.
I’d have gone with the dual option if the pipes were rear exit. I would think the tone is different, but not sure🤔. Thanks for watching Jon👍
Looks great, sounds Awesome. Just wondering if it voids any warranties. I really do like it. Great job Rob!!
Thanks. I like the new siund👍
Sounds great for a v6. Can't wait yo change mine out!
Yup. Pretty good I think👍. Easy install too😁
Just watched this. Great video. Do you still like the MBRP exhaust?
It was too droney! I replaced it.
@@RobMotive Oh WOW! Did you go back to OEM?
How is the drone if any?
60-70 mph drone?
You could definitely hear it!
Sounds good rob! i think i need to get the Rebel into an exhaust shop one of these days!
Thanks Bob. I like the new sound. The Rebel sounds awesome with an upgraded exhaust👍
You didn't mention any torque specs for the two flange bolts. My MBRP is in a box in my garage waiting installation. That will be my 32nd mod. Loved the video but if you know the torque specs it would be handy info for everyone. You even said, "don't over tighten". Spec would prevent that. Keep the vids coming.
Thanks for watching Dean. I don’t have any torque specs 🤔
Great sound! I need on for mine!...
Yup! Now the Taco has a voice 👍
Hey brother! Do you have a rear lift block?
I do not.
What did you do with the original system?
I sold it👍
Good video, I like the sound of the new exhaust, a little throaty. May need to change mine soon.
Thanks Steve. I like it much better 👍. Easy to do too😁
Do you know part number or which exhaust this is?
Here’s the unboxing vid with all that I know about it: ruclips.net/video/abgjVffxFms/видео.html
Whoaaa check u out installing stuff👍🏼next time wear a hard hat 😂😂
Lol! I gotta be me👍
We sometimes go on long trips. So the quieter the better. I bought an exhaust hanger removal tool. Hopefully it will help.
A removal tool should help. A bit of soapy water is a must though 👍
Did you have to mess with your catalytic converter?
Nope. It’s a cat back system 👍
This sounds great would this work on a 2nd gen 4.0L taco??
Hey Jake. I’d get ahold of MBRP or check out their site to see. Not sure myself🤔
What tip did you have on the stock exhaust?
It was a black tip that came with the truck from the dealer.
@@RobMotive ahhhhhh gotcha, you had the blackout package
Yup, that’s right😎
You need some impact guns!
I have one. Just decided to use a ratchet. Needed a workout😁
How much did it cost? Did you notice any "drone?"
If I recall it was $200-$300. Definitely has a drone. Ultimately I went with a TRD exhaust👍
Do u like this or trd one better
This is definitely louder!
Which mode exhaust is this
Not sure what you’re asking🤔
Is there a difference?
Why yes Jake...there is😁
Sounds good
Yup. I like it👍
What is the next mod?
Stay tuned my friend😁
Did you have to cut anything?
Nope.
@@RobMotive thank you! Installing mine right now lol.
Awesome 👍
I’m thinking about doing this to my Tacoma as well. It just doesn’t sound good enough stock.
Yup. This is a much better sound IMO👍
Any drone?
A little I’d say.
How's the drone doing 70 or more mph? Is it really loud or a little?
I wouldn’t say horrible...but you can definitely hear it.
I like the sound that comes from my 5.7 liter Tundra dual exhaust better! 😁
That’s a good thing. Nothing like having an add on that’s no good👍
Loosening the initial bolts would be good place for 18v impact. That way ya wouldn't flex the whole exhaust. Fun project. Now the neighbors know when you come & go..;)
For sure. They were pretty tight. 👍
You should have driven you truck around for 30 minutes or so just to make it more challenging. Love the smell of burning flesh.
I find that rather odd...🥴
this or flow master
Flowmaster👍
Wish I had a lift 😪
They make things easier for sure!👍
Not really digging the drone of it in the cab.
Definitely can be heard 😬
ratcheting air drill....
Nah...wasn’t necessary 👍
That sounds absolutely terrible
Different strokes Herbie👍