I was thinking the same with the Borla. $700 and it barely sounds any different? Really? My dad had a V8 Raptor with a Borla exhaust and that truck sounded fucking nasty. Granted that's a very different truck, but my point is they know how to make a good exhaust, I'm just surprised this is so bland
I can’t thank you all enough for making this video. It was super helpful in my decision making and the production quality was amazing. You guys crushed it!
Been rocking the MBRP for a year or so,painted it with engine heat paint and no rust so far. Sounds good and is tucked up so you don't smash your exhaust.best bang for your buck🤙
These videos have been the most extensive and comprehensive go to videos for any mods for your Tacoma. A tire video like this would be cool since I'm in the market for my first set of tires
Very through video. I bought a 21 with a manual. It had a magnaflow already installed. Way too loud. The highway drone, terrible on long drives. It's all you hear when you arrive. I researched and was considering trd or oem. I chose borla, price, ss and reputation. Drone relief finally.
I liked the Borla hands down. It sounded great and if I wanted to get in the mud or in the hills I wouldn't mind if it got scratched up. It's just I love the sound and I'm getting the Borla for my Tacoma. Thanks for the info !
Great video, but I gotta say, I have the MBRP and I daily my truck as well as drive long distance, once you get used to the sound it really isn't that bad, and well always make you smile at those you look at you with a dazed stare.
I took off my TRD Pro exhaust from my 2020 Tacoma and replaced it with the Borla. I could not be more satisfied and happy that I made the switch. Sounds great. Far better than the TRD Pro exhaust in my opinion. Doesn’t hurt that it’s paired with the KN Blackhawk cold air intake, Pedal Commander, and RIPP ignition coils either.
For someone like me that just bought my 3rd Gen Taco and has my lift, rims/tires, and light bar. This video was dead on letting me know which brand to go with. I picked the AFe as well prior to seeing you say the AFE also. Good video buddy. Really informative
AFE all the way for sure. The other two have their moments where they make a really cool sound that the AFE doesn't make but the AFE consistently sounds better to me.
Just picked up a DIY magnaflow performance muffler. Just cut out my stock muffler and welded it in. Personally, I sounds better than everything here. Great video!
Don’t count out Carven, personally there exhaust is the best sounding out of all of them, I’ve had mine on for almost a year and I have no complaints. Super deep growl and I’ve gotten compliments saying that they thought it was a V8.
@@CarvenExhaust just recently came across videos of your guys’ setups - wondering if anyone’s had CEL’s come up after the install? Definitely the best sounding exhaust I’ve come across and looking to get one ASAp
Awesome video guys! I love the objective take you have been doing on these comparison videos. It really puts the power into the viewer/customer’s hands to make their own decision on what is best for them and their build. Keep it up!!!
For "Overlanding" between the 3 to choose from here: Borla. Regardless of the price, sound, you need quality of pipe, welds and the peace of mind. 304 > 409 > Aluminumized Steel. Unless it's a beater.
Very thorough - nice job. I would go with the Borla for quality (and because they are made in Johnson City, TN where I live). Gotta support the homies 😉
I see a lot of posts pushing the Craven exhausts, the problem with Craven is they cheeped out and use low quality 400 series stainless steel that will rust. Borla only uses quality T304 stainless steel which costs a lot more than cheap 400 series stainless steel.
I’m running a dual MBRP here in Germany…. Extreme pucker factor when the inspection happened. Came in right under the mark at 94db! It’s got a drone for sure. Going to dyna mat to try and get the noise down. Either way it sounds great and looks awesome!
You want the Borla then, both the MBRP and AFE used 3 inch tubing which is to big and reduces exhaust gas velocity and cylinder scavenging, Borla is the only one of these three systems that got the tubing size correct for maximum exhaust gas velocity and cylinder scavenging. Add in the fact Borla also uses T304 stainless steel on all of their products which is far superior to MBRP's aluminized steel and AFE's 409 stainless steel and the clear winner is Borla.
Had the MBRP on my 21 Tacoma TRD Sport manual transmission and it was too loud for everyday driving, lots of drone noise in 3rd to 5th gear inside the truck,exhaust would even pop on downshifts,tried to add a magna flow resonator but loudness did not reduce much.Finally replaced setup with TRD exhaust and now have lower noise a little higher tone than stock exhaust.Will try the Borla S type sometime in future.
in the MBRP daily drive sound test, you had your parking lights on, the right rear lower bulb was not on, looks like you may have a bulb problem. thanks for the test.
I like the borla the best. Nice sound and not too loud. I have a loud pipe on my STI and that’s all fine but I don’t want my Tacoma to be that loud as well.
Looks like we found the same - I was scouting for the best recently as well and I am a very happy boy with the - aFe 49-46001-1B 3" Stainless Exhaust System for Toyota Tacoma 05-12 4.0L . I can from the flowmaster 50 series with 2.5 and its just as loud and more power.
This vid has been the best that I've seen so far.. Mainly since you showed how someone at home could do it. Also how u use the spray before and after. All other vids I've seen mention it but never state how it's used. More of a "they should know". The time and deatil given in these vids is remarkable!! THANK YOU!! Borla for me, Didn't like the sag on the AFE tip.. seemed to low.
The AFE and MBRP sound nice and aggressive, but I personally don't want the drone from it which i see a lot of others commenting that there definitely is drone, I've had drone on another vehicle, I aint about that life. Borla sounds better for daily driving, just for my needs and opinion, great video !
Running the powder coated mbrp 3" on my lifted 2021 limited. Drone a little louder than expected around 3000rpm but such a gorgeous sound when going under an overpass :)
I have the AFE, yes it sounds good, but on the highway could get too loud specially with the gear hunting. And one thing I did not like, the tip that was black in the beginning, it’s not silver, it lose the black color with the time.
I have to wonder if there’s any significant back-pressure difference between the 2.5” Borla and the other two at 3”. Does the better flow result in ANY dyno changes at all? Gotta admit- that MBRP had the most significant sound change- it growled nicely!
Bigger is not better the 3 inch exhausts in this video reduce exhaust velocity and cylinder scavenging, the Borla 2.5 inch system will have the highest exhaust velocity and the best cylinder scavenging resulting in the best performance. John Lingenfelter built over 600 horse power corvettes and worked with Borla on the exhaust and used 2.5 inch pipes, even today people still think bigger exhaust pipes are better but they could not be more wrong. The same thing applies to headers and header collectors. If nothing else remember this you are looking for exhaust gas velocity, the faster you can move the exhaust gases the better the cylinder scavenging will be with will allow for a better cylinder charge on the intake stroke resulting in more power.
I bought the Borla and do not regret it. Everything sounds very Honda civic like in real life. The Borla is very deep and just enough aggression for this mid size truck. If you are gonna go with the other options just straight pipe it at that point. Borla doesn’t restrict air flow either like the MBRP having a smaller muffler is not good for the airflow to come out. You need max air flow to come out and Borla does just that. There’s a reason it’s expensive and yes really overpriced but again worth it for quality too. Doesn’t rust like the MBRP as well. Don’t forget the other two brands rust easier as well too. If you get the Borla and want an even more aggressive sound a S and B old air intake is perfect. PS there’s a reason The guy went with the Borla for his truck for a reason lol.
Loved the video, I really liked the borla exhaust but dang its a bit pricey. I would of appreciated some runs with the stock exhaust as well just as a control because on some of those runs I was thinking dang it sounds pretty stock
I didn’t do a pre-built catback but I went with an Aero Turbine AT2525 muffler and it sounded awesome and got a ton of compliments before I went to URD Equal Length headers and then had to get a resonator because it got *raspy*.
Out of all the videos I’ve seen I had to go with Carven and I absolutely love it in person. The tip/tailpipe is removable and dumps right over the axle for better off-road clearance. Sounds even better on the 6mt hitting limiter while wot! Does hitting ECT on the autos allow it to rev a little higher do the autos only go up to 5,500rpm? Having the 6mt hitting the full 6k is awesome for these rev happy 3.5s
@@jerryrocketandthegogogirls3517 it kind of depends on your definition of too loud. When you’re really giving it the beans it’s pretty loud but casual driving it’s not unbearable. Even my wife who’s not much into cars/trucks doesn’t mind it on long road trips. Driven from TX to CO and TX to OH comfortably. You can keep conversation easily without raising your voice with the windows up. If you’re used to having exhausts on vehicles then no it’s not too loud. If it’s your first time having an aftermarket exhaust it might be too loud could be another way of saying it lol. I drive with mud terrain tires on my truck and they’re louder than the exhaust sitting at 70 if that helps at all too. I love this exhaust though. I genuinely believe it’s either this exhaust or stock exhaust. All others don’t sound great on the Tacoma. It’s hard enough to make a V6 sound decent as is and I get nothing but compliments when people hear my truck. Hope that helps
MBRP is loud and has presence, but I feel it lacks tunning on the high end of RPMs. Borla is the overall superior dor a daily in my opinion. There is a very nice twin tip exhaust out there (don't remembrer the name but it shows in short videos here in YT if you look for "Tacoma dual exhaust").
Running an Mbrp with an additional 6" resonator, probably sounds about as good as a na 3.5 can sound. Zero drone or rasp, but still the mrbp tone throught the rev range
We made this video so you could compare them and pick whichever one you felt was the nicest. Since how your truck sounds ultimately is personal preference 😂 but we reccomend the MBRP 🤙
I was a fan of the AFE. Glad it's going on "my" project Tacoma, lol. It would be interesting to "hear" these compared to the TRD Pro... Great content. Keep up the good work!
The problem with the Craven exhausts is they use 409 stainless steel that is magnetic and will rust, do a little research on stainless steels and you will understand why Borla uses T304 stainless steel and gives you a million mile warranty which comes out to 20,000 miles a year for 50 years. you will go through several Craven exhausts in the same million miles.
I put the aluminized mbrp with a dump, no tail pipe on my 06 tacoma. It cost 240 dollars and it's pretty nice but on the highway it does drone pretty loud. Gr eat test the borla sure is pretty and should last a lifetime thanks
If you don’t mind me asking what size lift & tires did you go with on this build? I just got my 22 Tacoma Thursday, I like the stance and the way your truck looks.
The time and effort you guys put into showing each exhaust system is pretty dope. Thanks you.
Our pleasure!
AFE has a nice medium to it, just throaty enough to be pleasing without being obnoxious. Borla sounds good too, but its pricey
Borla=stainless steel
I personally like the MBRP, borla sounds almost stock in my opinion, and for the price range, I’m gonna go with the MBRP! Thanks for this video!
Glad we were able to help 🤙
I was thinking the same with the Borla. $700 and it barely sounds any different? Really? My dad had a V8 Raptor with a Borla exhaust and that truck sounded fucking nasty. Granted that's a very different truck, but my point is they know how to make a good exhaust, I'm just surprised this is so bland
I can’t thank you all enough for making this video. It was super helpful in my decision making and the production quality was amazing. You guys crushed it!
Glad it helped!
Been rocking the MBRP for a year or so,painted it with engine heat paint and no rust so far. Sounds good and is tucked up so you don't smash your exhaust.best bang for your buck🤙
That’s a great idea
That’s a great idea! Definitely gonna keep that in mind 🤙
I live on the ocean, no way would I swap stainless for "aluminized steel" anything. Stainless or bust, and even 409 is pushing it.
These videos have been the most extensive and comprehensive go to videos for any mods for your Tacoma. A tire video like this would be cool since I'm in the market for my first set of tires
We used bf Goodrich KM3’s for this one 🤙
Very through video. I bought a 21 with a manual. It had a magnaflow already installed. Way too loud. The highway drone, terrible on long drives. It's all you hear when you arrive. I researched and was considering trd or oem. I chose borla, price, ss and reputation. Drone relief finally.
MBRP is the best sounding I've heard and you can get them in single or dual exhaust , plus they look great !!!
MBRP has a terrible note in person, made the truck sound like a 2003 civic. I sold it after three days.
@@jonc7371 strongly disagree, I've had my dual MBRP (I went with the 4 inch exhaust tips) for nearly 3 years now and I love it
@@rb6454 they keep selling them so someones buying them lol
I liked the Borla hands down. It sounded great and if I wanted to get in the mud or in the hills I wouldn't mind if it got scratched up. It's just I love the sound and I'm getting the Borla for my Tacoma. Thanks for the info !
I’ve had the borla for a year now. Best choice imo… right amount of growl, but not annoying at highways speeds. Sounds better once broken in too!
You won’t regret it
I just got the Borla and I love it...Even my wife doesn't complain, but it sounds sweet.
Happy wife happy life 😂
Great video, but I gotta say, I have the MBRP and I daily my truck as well as drive long distance, once you get used to the sound it really isn't that bad, and well always make you smile at those you look at you with a dazed stare.
The most thorough exhaust video I have ever seen. Magnificent work!
Thanks!
Really appreciate the effort you guys put into making this video! It’s AFE for me 💪🏻
Glad you enjoyed it!
I had a customer come in to toyota with the MBRP and it sounded so nice I loved it
For my Tacoma, the Borla is the winner! A high quality great looking product!
I took off my TRD Pro exhaust from my 2020 Tacoma and replaced it with the Borla. I could not be more satisfied and happy that I made the switch. Sounds great. Far better than the TRD Pro exhaust in my opinion. Doesn’t hurt that it’s paired with the KN Blackhawk cold air intake, Pedal Commander, and RIPP ignition coils either.
You got a sick rig for sure then 😂
@@tacomabeast thanks man. It’s a work in progress
You wanna sell the trd one?
@@quintbetts4703 I sold it last summer bud
Does the exhaust sound like the one in the video or are the Pros different when adding aftermarket vs regular TRDs?
For someone like me that just bought my 3rd Gen Taco and has my lift, rims/tires, and light bar. This video was dead on letting me know which brand to go with. I picked the AFe as well prior to seeing you say the AFE also. Good video buddy. Really informative
Thanks bro! 🤙
AFE all the way for sure. The other two have their moments where they make a really cool sound that the AFE doesn't make but the AFE consistently sounds better to me.
I agree with you, the borla was quieter and for basic overlanding where you're not going crazy with the truck, I think it would be nice
That's my favorite truck ever. TOYOTA TACOMA. It's a reliable car plus. Really good upgrade.
Best sound tests on RUclips. Thanks for this fellas.
Our pleasure!
Damn, that MBRP got my attention. My taco is fully blacked out, so one they sell with the matte black tip just might be the one I get
Flowmaster flow fx is what I put on my Tacoma and it sounds great
The AFE hangs too low. Borla hangs just right but the MBRP sounds the best imo
Literally my exact thought before coming to the comments, bravo 🤝
Mbrp sounds like a rattle can
Borla sounds best
Just picked up a DIY magnaflow performance muffler. Just cut out my stock muffler and welded it in. Personally, I sounds better than everything here. Great video!
Which magma flow series you weld in bro ?
I had a Flowmaster exhaust on my last pickup so I’m currently saving up for another Flowmaster FlowFX for my 23 Tacoma TRD Off Road
Don’t count out Carven, personally there exhaust is the best sounding out of all of them, I’ve had mine on for almost a year and I have no complaints. Super deep growl and I’ve gotten compliments saying that they thought it was a V8.
That's right. DM/Email us, I am sending you a shirt. keep holding it down for the Carven fam
@@CarvenExhaust just saw this now! emailing you guys right now
@@CarvenExhaustI want a shirt
@@CarvenExhaust just recently came across videos of your guys’ setups - wondering if anyone’s had CEL’s come up after the install? Definitely the best sounding exhaust I’ve come across and looking to get one ASAp
Id buy a Carven but 2nd gen😢
I love how the average MPG drops with each exhaust test from flooring it over and over haha
😂😂😂
Awesome video guys! I love the objective take you have been doing on these comparison videos. It really puts the power into the viewer/customer’s hands to make their own decision on what is best for them and their build. Keep it up!!!
Thanks bro 🤙
The magnaflow one sounds best bro but outta those 3 I like the afe
For "Overlanding" between the 3 to choose from here: Borla. Regardless of the price, sound, you need quality of pipe, welds and the peace of mind. 304 > 409 > Aluminumized Steel. Unless it's a beater.
Very thorough - nice job. I would go with the Borla for quality (and because they are made in Johnson City, TN where I live). Gotta support the homies 😉
Got me a MBRP used for $80. Sounds good enough for the price lol
The Borla looks and sounds the best!
I’ve had Mbrp on all my trucks and cars they always sound the best
I see a lot of posts pushing the Craven exhausts, the problem with Craven is they cheeped out and use low quality 400 series stainless steel that will rust. Borla only uses quality T304 stainless steel which costs a lot more than cheap 400 series stainless steel.
Brodi I appreciate all the time and effort to make this video!
Any time!
Borla is the best sound. No drone. Sounds Natural
Borla for me for the exact reason stated. I drive a lot of long trips and am too old now for a droning exhaust lol
I’m running a dual MBRP here in Germany…. Extreme pucker factor when the inspection happened. Came in right under the mark at 94db! It’s got a drone for sure. Going to dyna mat to try and get the noise down. Either way it sounds great and looks awesome!
DAMn that sounds strict 😂
That Borla sounds so much better than the others
MBRP is the best.. the price and the sound for me is the best..
Man, I am liking the Borla, its quieter and for longer trips (as you note) its the best choice.
Absolutely agree! The droning on trips would make me hate driving the truck back. I had to change it. I enjoy it now.
The BEST, in my opinion, would be the one that provides the largest increase in gas mileage and power.
AFE
You want the Borla then, both the MBRP and AFE used 3 inch tubing which is to big and reduces exhaust gas velocity and cylinder scavenging, Borla is the only one of these three systems that got the tubing size correct for maximum exhaust gas velocity and cylinder scavenging. Add in the fact Borla also uses T304 stainless steel on all of their products which is far superior to MBRP's aluminized steel and AFE's 409 stainless steel and the clear winner is Borla.
Borla definitely looks and sounds the best.
Yes the Borla sounds a bit better than the aFe, but ultimately I chose the aFe for my 23 Tacoma TRD Off Road double cab with the 6’ bed.
If MBRP with a finished tip like the Borla or dumped in the rear axle would be my choice.
Had the MBRP on my 21 Tacoma TRD Sport manual transmission and it was too loud for everyday driving, lots of drone noise in 3rd to 5th gear inside the truck,exhaust would even pop on downshifts,tried to add a magna flow resonator but loudness did not reduce much.Finally replaced setup with TRD exhaust and now have lower noise a little higher tone than stock exhaust.Will try the Borla S type sometime in future.
I'm 30 years old and finally started to appreciate a nice quiet vehicle. Excepts on my sports cars. 😂 but on my daily. Gonna stick with stock.
in the MBRP daily drive sound test, you had your parking lights on, the right rear lower bulb was not on, looks like you may have a bulb problem. thanks for the test.
We’ll get it checked out 😂
AFE was my Favorite.
Hard to tell in a video when it comes to sound. I like the AFE but magna makes a great sounding exhaust as well.
I like the borla the best. Nice sound and not too loud. I have a loud pipe on my STI and that’s all fine but I don’t want my Tacoma to be that loud as well.
Good choice!
Looks like we found the same - I was scouting for the best recently as well and I am a very happy boy with the - aFe 49-46001-1B 3" Stainless Exhaust System for Toyota Tacoma 05-12 4.0L . I can from the flowmaster 50 series with 2.5 and its just as loud and more power.
Banks is the best! Looks like everyone overlooked it!
This vid has been the best that I've seen so far.. Mainly since you showed how someone at home could do it. Also how u use the spray before and after. All other vids I've seen mention it but never state how it's used. More of a "they should know". The time and deatil given in these vids is remarkable!! THANK YOU!! Borla for me, Didn't like the sag on the AFE tip.. seemed to low.
So glad you enjoyed the video!
The AFE and MBRP sound nice and aggressive, but I personally don't want the drone from it which i see a lot of others commenting that there definitely is drone, I've had drone on another vehicle, I aint about that life. Borla sounds better for daily driving, just for my needs and opinion, great video !
Glad the video was able to help 🤙
Running the powder coated mbrp 3" on my lifted 2021 limited. Drone a little louder than expected around 3000rpm but such a gorgeous sound when going under an overpass :)
yo your mom recommended your channel and i’m surprised your channel is really entertaining
and the editing in this is incredible
😂 thanks mom 🤙
Been wishing for Tacoma that looks like this as a Christmas gift… 😊
Good luck!
Afe sounds good, and not too loud and droney mbrp, borla is good if you want it to sound more aggressive but not too obnoxious as mbrp
I really like the first one sounds really nice and smooth you have the same tires that I have on my Rubicon
I have the AFE, yes it sounds good, but on the highway could get too loud specially with the gear hunting. And one thing I did not like, the tip that was black in the beginning, it’s not silver, it lose the black color with the time.
I have to wonder if there’s any significant back-pressure difference between the 2.5” Borla and the other two at 3”. Does the better flow result in ANY dyno changes at all? Gotta admit- that MBRP had the most significant sound change- it growled nicely!
That’d be an insterestig thing to look into 🤙
Bigger is not better the 3 inch exhausts in this video reduce exhaust velocity and cylinder scavenging, the Borla 2.5 inch system will have the highest exhaust velocity and the best cylinder scavenging resulting in the best performance. John Lingenfelter built over 600 horse power corvettes and worked with Borla on the exhaust and used 2.5 inch pipes, even today people still think bigger exhaust pipes are better but they could not be more wrong. The same thing applies to headers and header collectors. If nothing else remember this you are looking for exhaust gas velocity, the faster you can move the exhaust gases the better the cylinder scavenging will be with will allow for a better cylinder charge on the intake stroke resulting in more power.
I bought the Borla and do not regret it. Everything sounds very Honda civic like in real life. The Borla is very deep and just enough aggression for this mid size truck. If you are gonna go with the other options just straight pipe it at that point. Borla doesn’t restrict air flow either like the MBRP having a smaller muffler is not good for the airflow to come out. You need max air flow to come out and Borla does just that. There’s a reason it’s expensive and yes really overpriced but again worth it for quality too. Doesn’t rust like the MBRP as well. Don’t forget the other two brands rust easier as well too. If you get the Borla and want an even more aggressive sound a S and B old air intake is perfect. PS there’s a reason The guy went with the Borla for his truck for a reason lol.
Thanks for the breakdown!
imo problem with cat-back is that its pretty much just for noise. I don't want to get into a war between stereo volume and road noise.
Loved the video, I really liked the borla exhaust but dang its a bit pricey. I would of appreciated some runs with the stock exhaust as well just as a control because on some of those runs I was thinking dang it sounds pretty stock
The amount of effort in this video 🤌
Good shit fellas
Thanks bro! 🙌
Borla kinda sounds like the trd pro exhaust. MBRP nice at low revs but would be annoying for long drives for sure.
I didn’t do a pre-built catback but I went with an Aero Turbine AT2525 muffler and it sounded awesome and got a ton of compliments before I went to URD Equal Length headers and then had to get a resonator because it got *raspy*.
Dang it must have taken hours to make this video.. I gotta say this is one of your best.
Thanks bro 🔥
I would do a dual exhaust just base on looks and slap my own costume pipe on use 2.5 pipe and a flow master 40 give it that muscle car sound
Out of all the videos I’ve seen I had to go with Carven and I absolutely love it in person. The tip/tailpipe is removable and dumps right over the axle for better off-road clearance. Sounds even better on the 6mt hitting limiter while wot!
Does hitting ECT on the autos allow it to rev a little higher do the autos only go up to 5,500rpm? Having the 6mt hitting the full 6k is awesome for these rev happy 3.5s
I like the sound of it too but is it too loud?
@@jerryrocketandthegogogirls3517 it kind of depends on your definition of too loud. When you’re really giving it the beans it’s pretty loud but casual driving it’s not unbearable. Even my wife who’s not much into cars/trucks doesn’t mind it on long road trips. Driven from TX to CO and TX to OH comfortably. You can keep conversation easily without raising your voice with the windows up.
If you’re used to having exhausts on vehicles then no it’s not too loud. If it’s your first time having an aftermarket exhaust it might be too loud could be another way of saying it lol.
I drive with mud terrain tires on my truck and they’re louder than the exhaust sitting at 70 if that helps at all too. I love this exhaust though. I genuinely believe it’s either this exhaust or stock exhaust. All others don’t sound great on the Tacoma. It’s hard enough to make a V6 sound decent as is and I get nothing but compliments when people hear my truck.
Hope that helps
@@drewncars9505 hell yeah thanks! I’m gonna have to get one
MBRP is loud and has presence, but I feel it lacks tunning on the high end of RPMs. Borla is the overall superior dor a daily in my opinion. There is a very nice twin tip exhaust out there (don't remembrer the name but it shows in short videos here in YT if you look for "Tacoma dual exhaust").
I’m a huge Borla fan. Love the deep throaty sound.
😂😂
Running an Mbrp with an additional 6" resonator, probably sounds about as good as a na 3.5 can sound. Zero drone or rasp, but still the mrbp tone throught the rev range
Thank you guys for making this quality informative videos 🤘🏽
Thanks for watching!
I ended up doing a cherry bomb on mine, stupid choice but never seen it done so I just went with it
Dope videos! What do you recommend if I wanted to change my stock exhaust for a new one on a SR5??
We made this video so you could compare them and pick whichever one you felt was the nicest. Since how your truck sounds ultimately is personal preference 😂 but we reccomend the MBRP 🤙
I love the borla definitely going to have to pull some over time for it
Eyeing the borla for my 23Taco
I was a fan of the AFE. Glad it's going on "my" project Tacoma, lol. It would be interesting to "hear" these compared to the TRD Pro... Great content. Keep up the good work!
We’ll keep it in mind for next time 🤙
I have the carven catback exhaust. I love it so far. Sounds great!
Me as well! Wish they showed it lol
Do u know if it fits 2022
@@benmonaco413 I wish I know the answer but idk what's changed on the 2022. Haven't research about the newer ones but it might.
The problem with the Craven exhausts is they use 409 stainless steel that is magnetic and will rust, do a little research on stainless steels and you will understand why Borla uses T304 stainless steel and gives you a million mile warranty which comes out to 20,000 miles a year for 50 years. you will go through several Craven exhausts in the same million miles.
I want that exact lift and tire set up that you guys have
We have a video on the entire lift too!
It wasn’t on the video but I want the carven exhaust
We’ll have to review it later 👀
I'd love to see some headers / high-flow cat reviews.
I put the aluminized mbrp with a dump, no tail pipe on my 06 tacoma. It cost 240 dollars and it's pretty nice but on the highway it does drone pretty loud. Gr eat test the borla sure is pretty and should last a lifetime thanks
That sounds sick 🤙🔥
Hearing a v6 rev is just funny to me. Put these same brand of exhaust on a v8 and its mind blowing the difference 2 cylinders make
Expected to see Magnaflow in the mix. Definitely don’t get the R4T high clearance if you want any muffling.
Ehhh magnaflow is too quiet
Nice video! Thank you for the time to show each option , ver helpful . Greetings from Monterrey Mx
Glad it was helpful!
MBRP sounds really good to me.. I always wanted my Tacoma to have good sounding
I like the borla. Personally I would go magnaflo though
Borla sounds and looks awesome!!
Mbrp on my 2010 4liter gets quieter as you get up to cruising speed
If you don’t mind me asking what size lift & tires did you go with on this build? I just got my 22 Tacoma Thursday, I like the stance and the way your truck looks.
We have a whole video on the suspension of this build on our channel 🤙
AFE sounds the best in my opinion! My god this truck has really bad mpg numbers. Thanks for the video
They’ll get better don’t worry 🤙
I have a Gibson and it seems to have a deeper tone.
ESP all the way homie😂
Is there a set of headers out there for the tacoma six cylinder? Great Video Mang!!!
Shoot us an email at support@tacomabeast.com and we’ll help you source it 🤙
that mpg is just because of the lift and tires? Not even with towing?
Yeah we haven’t done the re gear yet 🤙
What size lift does the great white have .. she looks perfect!
We have a video on the entire lift process on our channel 🤙
AFE and Borla sound almost the same for me and they sound awesome. MBRP sounds too raspy and a bit more loud, not my cup of tea of the 3.
What kind of tires,rims and suspension is on that Tacoma? Looks sick
We’ve got a separate video on that you can check out here: ruclips.net/video/nJLq2MOyCC4/видео.htmlsi=hFg78R6z5-HsOMLY