Sync RGB Devices With SignalRGB | Quick Start Guide
HTML-код
- Опубликовано: 9 июл 2024
- Download SignalRGB: www.signalrgb.com/
Written guide: signalrgb.com/blog/syncing-rg...
If you have RGB devices from different brands and you want to sync them all, or you just hate your manufacturer software because it's limited, then you've come to the right place. In this video, you'll learn the basics of SignalRGB and how to set up SignalRGB on your RGB setup.
There is a full tutorial series that goes deeper into each topic:
• Sync RGB Devices With ...
#RGB #gamingpc #pcgaming #pcmasterrace #pcs #gamer #gaming 
Игры
I've had Signal for a while now. I wasn't too happy how my fans were lighting up. After watching this I now have some things to change, cause the box for the fans is very small! How you explained to lay things out now makes complete sense.
This is a nearly perfect introduction to SignalRGB! I Wish you guys had this last November when I first tried it.
A couple of years ago I also imagined to have some kind of software such as this. Good job!
Same! I’ve always wondered if you can control an led keyboard with computer software.
Mr. SignalRGB, I love you for fullfilling my RGB ocd. I'm deeply suprised at how this software works and how well it is made, good job!
@@tthsgun they probably wanted all RGBs to be in sync not out of order.
I can't ty enough for this awesome software. In less than 3min from install, all my rgbs worked and were easy to sync! no more multiple crap software on my pc. I'll be sure to share this with friends and family. ty again
Yooooo, after properly doing it, like in the Tutorial my setup is super sick, thank you very much!
this is so advanced, you should have millions of subscribers
Thank you SignalRGB the only software that recognized my gpu. Love the effects.
I would honestly like to see Monster smart lights added to the already large category of supported devices, as they can function as a cheaper alternative to govee lights, specifically the light bars which I have behind my monitor. Besides that, the app is awesome!
As someone about to build a new system with RGB for the first time this looks like a brilliant piece of software to use. If you haven’t thought to yet, I think it would be ideal if we could import images with customisable transparency into the background of the layouts to make it even more intuitive for placing all the layout elements. Will definitely be using this when I’ve got my new system 😄
downloaded, was easy to set up my devices. thannk you for this!!!
brilliant program, controls my kraken aio and EVGA GPU nicely - just praying for support for x470 gaming wifi 7 and this is gonna look perfect 🙏🤞 would defo be worth buying pro version if my mobo was synced
This looks so cool. Im definitely gonna look into this somemore
Thank you this video was prettie useful 👍
signalrgb is literally the best program for controlling your rgb. Its so easy to use and it syncs all your devices together. Really the best software i have ever used!
used it a lot but i still think icue beats it
@CORENS you mean,when Icue software works??
What a bot comment
But does it work with hp
I recently tired it but it's taking around 500mb ram in the background isn't it much?
Thank you very much! I am having a hard time dealing with my Kingston Fury Beast's RGB lighting effects and this definitely resolved it.
Holy shit this is so much better than running Icue,Armory, Gskill etc etc etc on top of each others. And it syncs it way better, too. This is perfect
HANDS DOWN THE BEST OUT THERE!!
Just purchased SignalRGB and it is so fun to play around with. Took me a bit to get the layout, but I'm addicted. I hope they get fan controllers for ASUS mobos working cuz I have to use Argus with this. I'd prefer to have one unified fan/rgb controller, but regardless. Excellent software.
Thank you for posting this video 🎉. You have a new subscriber. Keep up the great 👍 work 🎉..
i just love this Programm!
Thank you for the guide
Ty for the guide.
Hi @signalrgb just had a quick question. I have a razer blackwidow v3 pro and razer basilisk v3 pro which both come up on the devices tab. However when clicking on the keyboard it doesn't allow me to change any settings of the keyboard such as mins after to dim leds or go sleep mode like it does allow me with the mouse? Any suggestions on how i could fix this? Thank you
Does HyperX RGB keyboards work? Specifically, the Alloy Origins 65 keyboard. I didnt see it listed in devices. Thanks!
I got my corsair fans set to the solid green color I want but 3 consecutive of the 9 fans have a random spot of red light around the circumfrence. Any ideas?
are all different rgb devices just connected via 3 pole 5v argb to the mainboard? or is there any additional hardware involved?
Thank you so much!!! 🙂
I love Signal RGB bc it looks cool and its free ❤
Y'all are so underrated
Few questions:
1) Is there an option to undo the last step while messing around with effects?
2) Is there an options to reset a specific element (like Color #1, Color #2 etc.)?
3) If not, will you be working on adding these features in a later stage?
Sounds like you essentially want CTRL + Z.
@@SignalRGB yes, for q1 indeed. For q2 I specifically mean resetting a single option, instead of resetting all options at the same time.
just found this, thank you
My reddragon k617 fizz keyboard isnt supported. Or at least it isn't picking it up. Any fixes or updates ?
I have Lian li Bora digital and B550 Auros master and can't figure component configuration but it's working fine thou.
Well done guys , getting tired of RGB fusion.
THANK YOU SO MUCHHHHHHHHHHHHHHHHHHHHHHH😩😩❤
Great guide... but I have one issue: The devices I have are not shown in the program. I have like 6 Fans (including those of the watercooling system as well) but they do not get listed up in the "devices" tab. But they are working since I can control them with the progam itself, I just cant adjust it in the layout. How can I fix that? My Mainboard and Graphicscard are shown
i'm having the same issue, did you ever figure it out?
@@obi-wankenobi2981same did you figure it out?
do i need to add as meny fans to list as i have or just once? and do i add conrollers or just the rgb devive its self?
nice guide👍
OMG! Thats amazing!
So, does that mean uninstalling L-Connect? Otherwise it has no way to know to use the motherboard header instead of the controller, plus I use L-Connect for my fan speeds 🤔
👏👏👏👏👏👏👏👏👏👏just that... THANK YOU
Will you support Corsair Link in the future? and how will you control the fan speeds. Will it need PRO?
But what if we wanna change other settings of our devices? For example i have a razer mouse and an asus keyboard, but we deleted the asus and razer software...
Absolutely Awesome
Please help! I bought SignalRGB Pro and i absolutely LOVE it! However, im having an issue with the profiles syncing to my wireless keyboard and mouse (Corsair and both are supported). The profiles work when i plug my wireless k and m in via USB, but as soon as i go wireless, it stops. I downloaded icue to wipe the memory of both, and then deleted icue. Still no luck. What am I doing wrong?
Hey, are there any known problems with the Razor Chroma? Everything works for me, except the fans connected to the Chroma controller...
Great program but i have one issue. I downloaded this a couple months ago and everything worked perfectly, now the problem I'm having is that the program has stopped loading on startup. I have deleted and re-download, gone into settings and made sure the slider was set to load on startup, and gone in and made an exception for the program to load on startup. It is listed in my apps as one of the apps to load at startup but I'm getting nothing. I have to manually open the program every startup for the effects to take place. Is this a known issue? Any suggestions you may have for me to further troubleshoot my problem would be greatly appreciated. Thank you.
Hey a question kann i use signal rgb if daisy chain like artic pst argb fans and only connect them to the mainboard
is it also possible to connect lights from wifi light strips? would love to add my lightstrips but they are not connected to the pc
the aio I am using is completely ran through the usb header on my motherboard so I do I stop Icue from running without it stopping the fan settings I have since they are all controlled through that
Can single rgb software control lian li fan and tforce ram?
I got all my lights working.. I just recently added some WLED works awesome.. but I now have a problem with my govee 65' led strip light.. Signal RGB sees it as ONE LED.. lol and it's in a box form on the layout.. max size but the whole strand just blinks the different colors as one led.. how do I change the way Signal RGB sees the strip lights? I am using the PRO version.. LOVE IT..
There a program out there to remap a Scimitar elite or control the water pump block once someone uninstall the iCue software? Thanks in advance. Also great product.
What do I do if my fans dont get picked up by the software at startup
Shouid we uninstall L-Connect for Uni-Fan controls while using Signal RGB?
does it work with three pin argb thermalright fans without a rgb controller. I tried to find thermal right fans in the devices section and could not find it.
So for me i need to have Armoury Crate installed because i use Ryujin III water cooler that has a screen that displays pc info so how would i go about this?
I have a third party controller and it seems that all devices connected to that controller make it show up as 1 item. The program recognizes 120 LEDs but combines them into 30 LEDs and when I try to add a custom strip, all devices light up as I highlight using the Lighting tab in the settings.
How do I get them to show up individualy?
This is really great and works perfectly with everything configured correctly... but why does it need to be connected to the internet for it to work? Can't it simply update the library if and when I do connect? I don't like being connected all the time.
Crickets???
Awsome Tutorial! Does this work will all sorts of RGB fans?
Hi, I have an msi vigor gk50 elite wich can be controlled with the msi program but signal rgb doesn’t detect it
Can i change the color of my asrock phantom gaming b550 m oc with this?
And what version of Signalrgb has the layout design? I dont have that on the Free version. Guessing your using pro or they changed it in the last year.
great one put it doesn't detect my fans only my ram and cpu cooling fan any fix ?
any tutorial to pair with glorious GMMK2 or Pro version ?
Does Nanoleaf lighting work with the application?
My fan hub isn’t detected is there anything I can do to fix it? I’m not using the pwm signal on the hub, maybe that’s the issue? I’m not sure how the program senses what’s plugged in
If your rgb fans are linked and in the mobo headers, can they can’t be individually changed without a controller correct?
i have razer sunapse but need it for my mouse can i still us it
it doesn't allow me to connect my msi fans that came with my case, am i unable to connect them since they are came with my case or do you guys not support msi fans?
hello do you have a guide because the software to change at least for my part everything is different and I cannot adjust my rgb or change the language to French ? thank you
What if I don’t know what fans I have and I can’t control the fans RGB ?
Planning on using 12x Lian Li Uni Fan ALV2 so lots of RGB capabilities but using the dedicated controller as the fans have so many options and the controller is designed to take the best advantage of them.
Assuming this software is only really going to work if I hooked the fans to an aRGB header on the motherboard and not the dedicated controller.
There is a passthrough connection tot he mobo but I dont think that 12 fans would be individually addressable via a single pass thru.
I also have a Lian Li dedicated controller but it seems to work , it also work with the case o11 it even changes the light to the case witch is impressive the app works good but not sure if it useses to much of the performance
Im currently using tecware phantom, can i use this to custom my keyboard led?
what if my aio fans rgb isnt plugged in motherboard but in power supply and only thing that makes fans spin on the aio is plugged into motherboard, will i be able to change the rgb or no?
The ICUE software also controls the cooling. If I uninstall it how do i adjust my water cooler?
Can i use my razor synapse app after setup cause i have different mouse profile
Could you please help me?
I have an argb Header controller for 9 fans but Signal don't find them
Maybe my fans aren't compatible
Fans.- Razer kunai
Aio. - razer hanbo but this. Works fine
My devices are not showing up on the bottom only my keyboard and mouse, Do you know why?
my devices wont show up
f
Same
If I buy a chroma razer will i be allowed to use unsupported fans like pccooler halo 3 in 1
even tho i have rgb fans but they dont show it in the devices tab can you pls help
it works with cooler master controllers, because that one connect on usb header and not argb header???
is there away to seraperate parts? in layout? thanks
does this work with an AIO with an LCD screen? can i upload GIFs like i can with the armory crate to my Ryujin 2?
question why do you need t o uninstall all of the other rgb apps?
my ram is not shown up i dont think its connected to a header but it works on rgb 2.0
What if I purchase pro and get some effects and cancel subscription… do I still have the effects that I download or no?
I dont see my mouse nor my keyboard i need help.
Does it work with my Green Cooltek 120 Cooler that is connected to my Fan Header on my MSI A320 A Pro Max ?
Perfect informative and insightful video representation! One question. Can you still have L Connect installed for the fan curves or does that need to be uninstalled as well?
Best to uninstall it
@@SignalRGB L Connect works just fine for fan control :(
what should I do if signal rgb sync my mtherboard,ram,mouse and keyboard. But my coller and 2 fans are connected to my pc and I can only change few collors with the botton that is on the top of my pc. Pls someone help
So I am having a struggle, I have led around my case, it is now showing up in devices and how do I connect to them
Awesome software but its not detecting my Vetroo 360 correctly (treats my 3 fans & pump) as 1 channel & its treating my fan controller (3 front intake + 1 back exhaust fan) again as 1 channel. Still looks amazing, too bad I can't heavily customize it. Also half the free effects dont even work/'cant be found'
Why is it only my ram (Corsair vengeance ) , my motherboard (MSI b550 tomahawk) rgb, and my gpu (3060) getting detected? Why aren’t my case fans being included in the rgb.
What if my arctic liquid freezer II 420 fans dont pulse in the component setup view? They stay dark... I clicked on my Asus z790 Proart MB icon but the fans on the AIO stay dark
Is it possible to add a device manually? Even if the software doesn’t “support it”?
I had my dierya keyboard for example hooked up to the software, but now it’s disappeared?
did you fixed your probleme yet ?
Hi I have aorus waterforce x360 aio I can’t find it on signal rgb its the only thing letter the pc down any tips on how to find it I’m a pro member just need a little help
Figures that I find this video right after installing all of the separate RGB apps from each of my peripheral companies lol...this app clears all of them though so it's ok ♥
can you run signalrgb and L-Connect 3 for your LCD screens?