Putting a 5.3 LS in an OBS Yukon SUV!
HTML-код
- Опубликовано: 15 дек 2024
- Instagram endlesswishlist_
/ endlesswish. .
Email inquiries to endlesswishlist@gmail.com
A/C Bracket
1996-98 Chevy, GMC 1500 2500 LS A/C swap or relocation bracket kit www.amazon.com...
Nice job. Everyone is doing LS swaps. Me I wanted to be different and kept my 98 GMC yukon old school with a ZZ4 crate engine from GM performance.
Great video, im glad is not all cluttered up with info we don't need like a lot of other youtubers, keep it up!
what i need. change it to swap 5.3 for suburban 1998 2500 4x4?
Like what you are doing with the obs keep it. I'm a new subscriber. I like working on my obs and 69 nova when I'm not on the road driving semi trucks
Awesome I'm doing a 99 5.3 into my 95 tahoe ,didn't know i needed the spacer for the torque converter
i can't wait i am planning on doing this swap in my 1990 long bed ima keep the my th400 because it was already swapped from the th700r. i would love a 4l80e but at this point budget is smaller but guys like you have shown me i doesn't need bells a whistles to be a good DIY build and have a better engine then my dying TBI.
Really excited to see this get wired up. On the fence of getting holley or wiring it myself
Great video very useful information. What ac kit did you use
What motor mount bracket you use for the Ls motor?
Hey do you still have this truck I was wondering if you could measure the ac bracket length and width and how tall the spacer are this part is out of stock
Don’t they make a flex plate for this swap just asking doing the same swap but on a 1995 obs
Nice job on the a/c compressor my question is 4.8 work with the bracket to
Can i use the 99-02 4.8/5.3 engine trans and transfer case in my 98 k1500 ? Thanks
Couldnt you just install a newer 4L60/80? Isnt the wiring and control rhe same between the 3?
Very good work and answer lots of questions with out been asked. Thanks my brother..
How can I make sure my Yukon RPM is working right?? Do you think it has something to do with my Gas pump??
Rpm signal comes from the ecm
What part number for motor mounts?
Awesome video, new subscriber heard about your channel from the Ls guru channel these videos will help a lot in about to start an ls swap on my 97 Tahoe 5.7 out 6.0 in
How come you didn't go 6.0 or 6.2 ? Doesn't the 5.3 have about the same amount of hp and torque around 300ish?
Doesn’t it already come with a 5.7 tho?
What spacer did u use on the flex plate? I hve a 96 silverado I want to keep my stock tranny...does it also need new torque bolts too?
What did you do about the pcm differances? I see some guys run the old and new pcm's. Is there a way to run just 1 and still have working gauges? I have a 96 2 door tahoe i wanna LS swap.
I think I would have done a 4.8 because they don't have the AFM that causes a lot of problems...
Its damn near the same horsepower...with a small turbo running at just 8lbs boost can give you over 500 hp
AFM didn't start until a certain year, I think 2007 although I'm not sure
99-06 no afm
Hey bro I found the bracket online by chance do you know what belt tensioner I need and what belt ? Can’t seem to find those two things so I can order it. Wanting to do this kit on my swap
I don’t remember. When I ordered mine it said in the instructions or the item description what tensioner you need.
@Endless wishlist had a question on the dirty dingo slide mounts. Does it let you retain the stock location of original obs transmission? Like as far as not messing around with driveshaft mods or transmission cross member? I appreciate all your time and knowledge you share with us subs.
Yes it does. They lets you slide the engine back toward the transmission. I didn’t mess with anything on the trans.
Mom's Tahoe has the 5.3 and my yukon has the 5.7 did the test going to sequoia from LA. My 97 yukon did better gas mileage than her newer Tahoe and I had more power going up the hills.
Did you make your own mounts?
I'm thinking of doing this on my 95 gmc sierra 5.0 v8
I got a 5.3 trying put it on my obs 90 where can I get the ac kit
Man Im liking the process. but i have a question? where did you get the ac compressor mount from?
It’s in the description
Question if I put a ls3 cam in a 6.2l will I have to change the oil pump?
What headers did you use
I'm very interested in how you do the wiring, and what ecm is used, i have an idea how id do it, i wanna see how you do it! I really like the older trucks, great video.
How's the stock trans of the obs holding up with the ls? Got a 99 tahoe that I'm putting together and want to keep the stock trans
It is holding up great. No issues so far.
Is it better to use the obs battery location and cables?
Whered u get the space on the flywheel?
Summit racing equipment
Nicely done Sir, I hear you about working on the dirt it definitely sucks. Great job!
Part# for the spacer thanks
Besides the engine, what did everything cost for the parts to do the swap? I'd love to do this. Great vid!!
I did another swap in a 98 and I made a video going over what it cost me. But keep in mind that truck was budget to the core. I spent less than 1000 bucks. This swap will cost a little more
Endless Wishlist thanks for all the info. Your trucks are badass
@@EndlessWishlist @ no way to go with 5.3 stock a/c compressor???
Im doing the swap in my 99 chevy tahoe 4x4 with the 4l60e, what adapter do I need to mate the 5.3 to the transmission and what flexplate do I utilize the 5.7 or the 5.3?
I’ve covered it in several other videos. 5.3 flexplate with a crank spacer. Bolts right up
I need mine done bro
Endless Wiishlist-Which camera did you used to record this video?
This was a GoPro hero 5
Where did you get the ac compressor and alternator adapter?
1996-98 Chevy, GMC 1500 2500 LS A/C swap or relocation bracket kit www.amazon.com/dp/B07NCS6LRL/ref=cm_sw_r_cp_api_i_DjoHEbSBSQX62
Hey man i have a 96 chevy silverado 5.7 2wd i want yo install a 03 ls 5.3 motor can i use the same transmission that i currently have since its new
Yes you can.
@@EndlessWishlist @ u used the stock tranns???
@@EndlessWishlist @ what about the stock a/c compressor?
How different is the 6.0 compared to the 5.3 I also have a 99 yukon 4wd amd dont wnna swap it twice
Same exact thing. Externally the 5.3 and 6.0 are the same
It'll be much faster and better if you just buy a 4l80 flex plate and be done with it. No adapter or messing with holes
Did you use the same transmission you had in the 5.7 ?
Yes I did
Thx, do you have a part number/link for the torque converter spacer ?
I just got one off eBay. “Ls to 4l60e crank spacer”
Thank you
You have a list of stuff you got boss and company
Who else sell that a/c bracket amazon always never has it
How much would you charge to do a hardness
I’m not sure. And honestly I’m not sure if I would want to. It is just time consuming. There are some guys on the 88-98 ls swap Facebook page that make them
Endless Wishlist thanks 💪🏽
You should have taken advantage of the engine being out and washed inside of the engine bay
Cool, well done. Only a 5.3 is NOT an LS block. I know everyone calls it an LS swap, but that’s because people have been doing actual LS swaps as long as LS series engines have been around, like an LS1,2,3,4,5,6,7 or an LSX - performance engines that never came in a 5.3.
Fitting a 5.3 out of newer generation GM truck or suv(LM7, L59, LC9, LH8 or an L83) into your older Yukon, does not turn your new engine into an LS, I’m sorry.
You're splitting hairs, the term "LS" is synonymous with the GM gen III / gen IV small block architecture.
Cardboard is a cheap mans creeper
All the stupid modifications that give no benefit just set back
When I could make a 350 that will do a wheely
For half the cost you can do alot better with a ls lol
Bro lay plywood down