Anycubic - Photon Mono + Wash & Cure 2.0 - Unbox and Setup
HTML-код
- Опубликовано: 25 авг 2024
- Amazon Links
Photon Mono: geni.us/P8El
Wash & Cure: geni.us/jS4cEq
Translucent Green Resin: geni.us/tC8HaO
ANYCUBIC Photon Mono 3D Printer, UV LCD Resin 3D Printer Fast Printing with 6.08'' 2K Monochrome LCD, Off-line Print 5.11"(L) x 3.14"(W) x 6.49"(H) Printing Size
2.5X Faster Resin 3D Printer,ANYCUBIC Photon Mono 3D Printer's printing speed is 2.5X faster than the regular 3d printers, rapid prototyping greatly improved printing efficiency and saved more time, comes with a 6.08'' 2K Monochrome LCD and only takes 1.5 seconds per layer exposure to cure resin, whose service life is 4 times that of RGB LCD screen, save material and costs
High Accuracy and Strong Stability, ANYCUBIC Photon Mono LCD screen Adopts matrix parallel light source 15 pcs lamp beads, is able to carry out uniform exposure, improve the quality of models, Z-axis guide rail structure and stepper motor have better stability, with an accuracy of 0.01mm, it effectively eliminating layer patterns, It's a great 3D printer for printing games, movies, cartoon characters, miniatures, etc.
Outstanding Prints And Easy To Use, Off-line printing function with size 5.11"(L) x 3.14"(W) x 6.49"(H) / 130 x 80 x165MM, Photon Mono resin 3d printer uses a removable one-piece transparent cover to make the internal space of the machine, and the printer can be set to stop printing immediately after opening the cover, which is convenient to operate and see the printing process, Friendly use for beginners and good performance for the enthusiasts
Outstanding Workshop, The transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate and ensure your success printing, reduce wasting of resin, New photon mono uses One-piece FEP, which can be easier and quicker to replace
-------------------------------------------------------------------------------------------------------------------------
ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box
Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly
2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs
Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow
Effective and Diverse Washing Modes: There is a propeller in the bottom of wash cure station, when work, it spins the solution like a little tornado and changes spin direction halfway through the wash , which creates the perfect flow to clean every inch of the print. 2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin
Anti-UV Light Hood: The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more safety.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
New Channel: www.youtube.com/@Just_Print
Photon Mono: geni.us/P8El
Wash & Cure: geni.us/jS4cEq
Translucent Green Resin: geni.us/tC8HaO
@just vlad why don't you buy the mono x?
quick question: Do you absolutely need 95% alcohol? cant you just wash it with water?
@@Doile911 water washing only if you use Elegoo resin
@Just Vlad I have a photon mono se also. I can't get the print to stick to the build plate even after leveling it. Can you help me please
@@itzbrownie_1151 any success on with your build plate?
You are good at making these videos. This answered like a million questions I had as a new owner. It's like you came over and personally showed me how to set it all up and use it.
i should have watched this video 'before' trying out my new resin printer >.> lets just say my bedroom and living room which are connected smell absolutely horrid ... learned a lesson, also! there are housings with hoses you can buy to put it inside of if you dont have a ventilated area, can literally put the hose out the window or something, i found them online after i made the first oopsie lol
I was watching this just to see what to expect from this print if I would order it before I went to sleep. I assumed that will skip through like 60% of the video to save time and to just see the most juicy parts but honestly I have watched the whole thing. It was so straight to the paint and informative that skipping even a single second is a waste. Subscribed and extremely impressed, seriously extremely impressed with the quality of the video!
A seasoned 3D printer explained that there is no need to cure the vat after each print. Resin can stay in the vat for weeks and months. It's not milk. It won't go bad. Great video!
You mean clean, right? Curing the vat would be a very bad idea.
@@Smokinjoewhite so you can leave the resin in the vat ? I', a n00b, thought you had to clean it all the time...
Do not throw away your wash alcohol! The resin solidifies when exposed to UV. so when you need to change it out, dump it into a glass jar and let it sit in the sun all day. then, grab a funnel and some filter paper and you can filter off all the solids. then reuse your alcohol as a primary wash with new alcohol being used for a second quick final wash.
edit: also, you apear to be a bit too concerned about concentrated alcohol, I guess because its a powerful solvent and were alwase taught to treat it with care, which you do.. For your wash, or any clean-up of resin, 100% ISO is best. you can also leave the storage basket in the bath. they would not build the basket out of a material thats dissolved by alcohol, that would be silly.
I just ordered this wash and cure station, do you think I could use acetone instead of alcohol? I like washing my prints in acetone because it cleans them to perfection by just swirling them around for 10-15 seconds
@@LeoNelBuilds depends if the acitone will eat the wash station...
IPA is all you need to wash with a sitr bar like the was stations have and although they take sevral leters to fill, its reusable so you don't realy have much loss of your solvent.
@@nickzwa thanks, that’s my main concern… if the container plastic and mechanism could be destroyed by acetone, maybe I’ll use 99% alcohol and have one last dip of acetone separately for good measure 😆
@@LeoNelBuilds Do not use acetone! That shit will eat plastic!
will it work with ethanol? I got jars and jars of ethanol lol
I’ve been watching 3D printing stuff all day and you’re one of the first I’ve found who just shows it in action and what to do, thank you!
Just bought this set, and this video was absolutely perfect. Thank you!
Sharp, simple, and to the point. Didn't over complicate things and explained everything perfectly!
Great work!
27:30 That plant really wants to be in the printer XD
"Lemme get some of that UV light brooo"
Hahahahahah
So simple and straight to the point. This video was perfect for helping me get my photon mono 4k set up without overcomplicating things. Thank you
You helped me put together my Ender 3 Pro last year with your fantastic step by step vid. Now, when I was seeking out more details on the Wash and Cure, I went through a few videos and came across yours. Once I recognized your voice, I was like - no WONDER this is the best explained, detailed video on this product. I had a few questions left after watching the other youtubers, and after viewing yours, they are of course, answered. You are the best!
I was going to skip the wash and cure until I watched this video. As soon as I saw how easy it was I went and ordered one. I should be up and running in a few days. Thanks for the video! A lot of great info here!
Thanks for this review. I’ve been thinking about getting into 3D printing for quite some time and this has been really helpful to solidify my decision to start my 3D printing journey with a resin printer. The AnyCubic looks like a solid candidate for my first 3D printer. Thanks again.
Just bought one and this video is just what I needed! Thanks for a detailed, but easy to watch video, Great Job & Thank You!
Hey man. You overcured your model. For something like that you only need about 30 seconds to a minute. Your goal is to get rid of the stickiness on the outside. If you overcure a model it begins to brown. This is why you got a discoloration and the loss of sheen on your test print. Not a bad video though. Just a tip.
Only that short? I did mine for 4 minutes but it’s gray resin (Phrozen aqua gray 4K). I am still figuring it out.
As someone brand new to 3D printing, how long should things usually be washed and cured?
@@TheLordNoodles the cure time for phrozen aqua gray 4k is about 15-25 minutes if you use 2.0 cure machine. You need a very high power uv light to cure resin in 30 seconds, and will be overheated at that power
Do I need a cure station?
FYI:
For this model, it is recommended that you set it at 2:00 for most prints. Only go higher for bigger, bulkier prints.
I just bought this setup off of Amazon. Before I opened it, I wanted to see the process. Thank you so much for making this video!
Thank you so much for making this video. The step by step process, and watching someone with experience has given me the confidence to go ahead and enjoy my Photon Mono without so much worry I had in the beginning!
Thanks for this amazing video. I’m about to use these two machines for the first time and this helped a lot.
THANK YOU! I just received this set in the mail and your walk-thru should be everything I need to get started with confidence!! Plan is to use this for architectural models.
Printer and cure station is out for delivery today - this was a super helpful video - thank you!!!
Excellent Video! I have decided to purchase this setup based on your video and demonstration. I would suggest that everyone make sure that the build plate is completely free of alcohol before you reinstall it into the machine. you don't want alcohol finding it's way into your expensive resin. :) once again, I really appreciate the time and effort you put into this presentation!
Nice Job- Easy to understand + speaking tempo⭐️⭐️⭐️⭐️⭐️
You dont have to empty the resin out everytime your done using it. As long as its not in a spot where sunlight will hit it, it should be fine to just be left in the tub. Saves time and potential mess of dumping it everytime you're done
Never even crossed my mind to wash the vat in there as well! This is a game changer
Thank you so much for this video! I got this setup for Christmas/my birthday and have just gotten around to finally setting it up.
Thank you SO much for this video! I'm doing my first prints now, this has been extremely helpful.
Wow I didn't realize how practical this wash machine can be....
This was very helpful. My son is 7 and has a 3d printer, and it looks like we still need the wash and cure machine. I will have to move him outside in a shed with this set up. We thought we could have it in the house. The smell is extremely strong.
I have just purchased the Anycubic Zero, Cure station & 1L resin for £160, Just arrived today :) super excited to try it out. Large sale on Anycubic at moment & some epic deals to be had :)
You sir are sent by the lords of order. Thank you for this video :)
Very thorough and clear. Your video was exactly what I was looking for! I feel much more prepared to crack those boxes open. Thanks!
Thumbs up because your profile pic...
@@vtpo4381 kind of the reason I bought this printer. Amongst other things, I want to print the often neglected Macross trident with the lead blue 1s, red 1a, and green 1a.
This video was extremely helpful. It curved my learning with resin 3d printers thank you.
Great vid. I'd been eying off both the printer and the washer/cleaner because they seemed like an easy way to get into 3d printing and this video convinced me to take the plunge.
I am now glad I bought the clean and cure...DAYUM. Can´t wait for mine to arrive
I just purchased both of these today. Can't wait to get them and start printing 1/35 armor and tank accessories!
This video was so informative, especially as a first time printer owner. Thank you so much for making it!!
I'm away to get the set soon for my modeling hobby ots kind of becoming a must to have one!
Your garage looks better then my living room
Been thinking about 3D printing,
This one is on the short list
thank you!
Super helpful video! I’m considering a purchase and this was a perfect walkthrough of all the parts & processes. Answered a ton of my questions about this set of machines :)
Super Video! Ich habe für 2,00 CHF Applaus gesendet. 👏
Excellent, excellent, excellent video for someone like me who has no idea how to use a 3D printer. Thanks!
New to these sorts of thing and I think you just old me on getting this 3d printer with the wash and cure
Exactly, start to open from the bottom, I can see now why it was complicated at the moment when I took it out of the box.
I cannot thank you enough for this video!
this is exactly what i was looking for thanks so much
thank you , set mine up following this vid step by set , I am now printing my 1st figure , thank you ! god it is easier than my filament printer !
Very good video. I just got one and your video just help me understood almost every basic thing about it. Thank you.
Watched this video twice, once before it arrived and once after.
Really useful.
Not sure if it's the type of resin or what, but I bought 2 airpure filters to go in the printer but even without them i can't detect any smell at all from the resin.
Final thought is that you could’ve used the plastic scraper across the VAT lightly (if you wanted to save that resin you exposed in the end) aside from that I have no idea why you tip it sideways when the UV is being exposed, but you did set it up and get nice prints, great job 👏
20:52 my ocd got killed. Also, super work in presenting man thank you
this was very helpful for my set up, thank you! now all i gotta do is fix how my print doesnt want to work sometimes haha. learn as you go
Great video. This really helps me get comfortable and explains everything to get started using these two systems! Now to my garage to unbox and get mine printing/washing/curing . . .
Man... the vat washing was magic haha thats make me love resin printers again. Great video!
That green juice looks mighty yummy...
I have to say that this is probably the best video on my set up I have seen :) informative, to the point and great demo. Thank you excellent video :)
Been getting progressively fed up with my 2nd filament printer. Thanks for this, I'm sold!
The only thing that bothers me is the disposal of so much alcohol, so I've opted for water washable resin... We'll see :-)
You can reuse the alcohol by curing it and then sieving the resin that was in it and it'll get clear again!
Thanks for the video!
Very excited to set up my printer tomorrow.
Thanks for this amazing video. helped me a lot after purchasing the combo pair. BTW, The reflector has coating on both sides. not just the blue.
Just got this exact combo myself, thanks for walking me through everything!!
To keep your bath clean, take a spray bottle with alcohol in it and spray it down before washing it... it helps alot.
This is a great video, well planned and good use of time. Thanks for all the information!
Fantastic video, well worth the like. Thanks for the effort you clearly put into this, I'm feeling great about getting my printer soon!
I enjoyed the video but something to keep in mind is the audio cos there is a highpitched tone through the entire video and it made it super hard to watch it for me being autistic 😭 but everything is shot beautifully and it's been helpful. Thank you
Excellent explanation!. Thank you very much
Great video. At 33:48 you may want to not exert so much pressure on the build plate. It a better idea to hold the side of the plate up.
Great video! Straight to the point and definitely convinced me to buy the set.
Just got this Printer/wash combo, thanks for setup info
Thanks for this very clear video. I will use water washable resin to enjoy more the process,
there is another peice of paper in the box that looks kind of like a flyer that says "use for leveling" or something like that. using the card stock card that you used may result in issues with the build plate being to high. or it might not
So helpful - thank you!
currently have an Ender 3, Ender 5 Plus. And im quite interested in resin printing lately, this cheap Photon mono is good for my first experience. I dont mind the washer, i can just build that washing machine with some motor and bucket, few UV in an enclosure and we are in business. good video, thankyou
Thank you for this excellent video!
you save me... thank you
Great video, thanks man!
FYI the plastic spatula indeed can damage the FEP very easily, use microfiber cloth instead.
Good video, thanks mate
that wash and cure machine sounds funny
I just tried the method at the 35 minute mark to remove the excess resin from the vat. I did the same thing (poured as much as I could back into the bottle. Same green resin too) then cured the remaining film for 30 seconds. It did not come off easy (or at all). I ended up having to soak the tray with alcohol for a long time and occasionally rub and massage the resin until after nearly an hour it finally came out with the plastic spatula. Even then, there was minor scratching left to the screen by the plastic spatula.
I would not attempt this again.
I did this as well and the FEP film is fucked. I have to order replacements. Do not expose leftover resin to the UV if you can help it, use a microfibre cloth or papertowel and rinse the rest off with metho or IPA.
Thanks so much for this. It helps a lot
Nice video!
But FYI, there is a very high pitch tone from the mic throughout the video. It's quite uncomfortable when watching with a high end headset at least.. :)
But quality video non the less!
One would think that adding mirrors to the lid of the wash and cure would bounce the UV around a little more.
I'm going to 'go ahead' and buy this 👍
THANK YOU Very much man
Super 👽👍
Fantastic video thank you
very informative video, thank you!
If you make a little chamfer on the botton you can get the pieces away more easy ^.^
Awesome Video man! Subcribed
Great video! There is a weird high pitched frequency throughout the video however that wrecks my ears haha
very informative and well put together video. thank you sir.
I bought 1 gal of denatured alcohol for 13 bucks and it fills to the max line perfectly.
Amazing video, thx a lot!
gracias por la revision
Thanks Bro.
Can we cure few items at a time?
Fantastic Guide🤗
Lol should have put the cover on while you was washing to block the light. Just like you did for the resin bath.
Thank you for the video!
@20:52 in the video, his plant sneaks into the printer.
Which one do you recommend to buy between this product and creativity ld-002h that you reviewed before?