Hi! I just want to thank you for your detailed videos on these Resin 3D printers. In fact, I am currently deciding between the M3, Mars 3 Pro and this machine. Perhaps you could do a comparison video of which printer you liked best overall? Content suggestion aside, would you say that the $400 price is a fair price point in comparison with the M3 or Elegoo? Again, thank you so much and keep making awesome videos 🦾
having the end-stop on top makes perfect sense, what does the printer do after power outage ? It homes.... with a partial print on the plate, this will be certain death of the release film, most like screen too...
When you leveled, the paper cannot be pulled...check Creality video.. Maybe that 's why model detached? also, looks like it never finished either....probably detached mid print
So if i get to buy a resin printer, do i need to also buy a washing/curing station? Im interested in buy a resin printer, but dont have enough money to buy that washing station. . .
hold on... did they not learn from the first lot of sent items ? Why would you yet again put supplies into the VAT, and risk denting and loosening the tension ?? Man Creality is so out of touch lol
great video, please also show us how you got all the left over resin out of the machine and washed the bed, or can you leave the resin in there for like a month untill you print again?
Well he mentioned that he was using water washable resin, so you should be able to just rise the tank with water (clean water to avoid water spots) and he did show putting the resin back into the bottle, he used the included filter to pour the resin back into the bottle using the built in pour spouts on the tank.
Thanks. So basically you unplug the printer and tilt it over the kitchen sink to get the left over resin out? And then you can spray water inside the resin section? Sorry I'm just confused how the messy resin gets cleaned up. I never owned one.
@@teamcyrmining3673 most of your left over resin will go back into the bottle using the filter funnel. Only use water in the sink to rinse it if it is water washable resin. If it’s not water washable, you need to use rubbing alcohol. I recommend using alcohol after rinsing the tank just to make sure that it, and the film on the bottom are absolutely spotless.
@@teamcyrmining3673 you also do not need to unplug or tilt the printer to do this. The resin tank has to finger screws that you loosen to remove it completely from the printer.
Sunlight has UV, does the printer need to be always away from sunlight? What happens if you leave the resin in the basket for a few days before you print again?
It's time creality make a large resin printer like the peopoly phenom or the elegoo Jupiter. I know they have the smarts to do it. Happy creating..........
You ran your fingers over the surface of the build plate several time, probably getting skin oil on it, that's probably why the build pulled loose. Take some IPA and wipe the surface of the plate maybe?
HEY VLAD WONDERING IF YOU COD HELP ME OUT FIRST TRY I GOT HALOT ONE IN LAST WEEK ITS MY 2ND PRINTER I GOT UPS AND DOWNS FROM THE ELEGOO MARS PRO AS IM STILL FAIRLY NEW TO ANY PRINTER TO TECH IN GENERAL BUT I HAVE ELEGOO CLEAR RESIN SO WANTED TO DO SOME PRINTING ON MY NEW BUDGET FREINDLY HALOT ONE I WAS WONDERING IF U COULD SEND ME REPLY ON SETTINGS OR IV EMAIL IN ABOUT SECTION ON CHANNEL IF U COULD I WOULD REALLY APPRECIATE IT THANKS FOR READING MY COMMENT,👍KEITH
New Channel: www.youtube.com/@Just_Print
Halot One Plus: geni.us/ZNh7X6U
Wash & Cure: geni.us/1A4m1
Hi! I just want to thank you for your detailed videos on these Resin 3D printers. In fact, I am currently deciding between the M3, Mars 3 Pro and this machine. Perhaps you could do a comparison video of which printer you liked best overall?
Content suggestion aside, would you say that the $400 price is a fair price point in comparison with the M3 or Elegoo?
Again, thank you so much and keep making awesome videos 🦾
having the end-stop on top makes perfect sense, what does the printer do after power outage ? It homes.... with a partial print on the plate, this will be certain death of the release film, most like screen too...
Been looking at SLA printers and your videos does help me with deciding which ones to get
So which one have you decided to get? I'm still giving it a thought
Get Elegoo, mars 2 is pretty cheap and is a good starting point. Anycubic has terrible QC and lot of issues
When you leveled, the paper cannot be pulled...check Creality video.. Maybe that 's why model detached? also, looks like it never finished either....probably detached mid print
Yep I just did this on mine, and the paper was pretty jammed. Shouldn't be that much gap I think! Mind you I have yet to print...
does the plate/bed from the Halor One Plus fit in the UW-01 wash station???
The resin printer does not show up on the Amazon UK site yet. Only the Halot One is there. So I don't know the price?
You can get it on technology outlet but a fair bit more pricey
After purchasing ender 3 S1 pro I will not personally recommend or prefer creality printers until they start focusing on quality control.
Your gonna be waiting awhile then 🤣
So if i get to buy a resin printer, do i need to also buy a washing/curing station? Im interested in buy a resin printer, but dont have enough money to buy that washing station. . .
look up DIY on those until you can afford one
hold on... did they not learn from the first lot of sent items ? Why would you yet again put supplies into the VAT, and risk denting and loosening the tension ?? Man Creality is so out of touch lol
Do I need to use the machine to wash the object have been printed
How's the noise of this 3D printer?
Does it produce too much noise?
Would you please do a video for halot one pro as well and then compare it with anycubic photon M3
great video, please also show us how you got all the left over resin out of the machine and washed the bed, or can you leave the resin in there for like a month untill you print again?
Well he mentioned that he was using water washable resin, so you should be able to just rise the tank with water (clean water to avoid water spots) and he did show putting the resin back into the bottle, he used the included filter to pour the resin back into the bottle using the built in pour spouts on the tank.
Thanks. So basically you unplug the printer and tilt it over the kitchen sink to get the left over resin out? And then you can spray water inside the resin section? Sorry I'm just confused how the messy resin gets cleaned up. I never owned one.
@@teamcyrmining3673 most of your left over resin will go back into the bottle using the filter funnel. Only use water in the sink to rinse it if it is water washable resin. If it’s not water washable, you need to use rubbing alcohol. I recommend using alcohol after rinsing the tank just to make sure that it, and the film on the bottom are absolutely spotless.
@@teamcyrmining3673 you also do not need to unplug or tilt the printer to do this. The resin tank has to finger screws that you loosen to remove it completely from the printer.
Sunlight has UV, does the printer need to be always away from sunlight?
What happens if you leave the resin in the basket for a few days before you print again?
how many minutes did it took to print the whole tower?
can you use any resin that is water washable for this printer?
Which one do you suggest this or anycubic photon M3
It's time creality make a large resin printer like the peopoly phenom or the elegoo Jupiter. I know they have the smarts to do it. Happy creating..........
You ran your fingers over the surface of the build plate several time, probably getting skin oil on it, that's probably why the build pulled loose. Take some IPA and wipe the surface of the plate maybe?
Mine came no twistes (rubber screws)
💕👌👍
🎉
In oh wait, it’s a SLA machine…. Never mind.
Oh wait your a moron 🙄 🤣 😂
HEY VLAD WONDERING IF YOU COD HELP ME OUT FIRST TRY I GOT HALOT ONE IN LAST WEEK ITS MY 2ND PRINTER I GOT UPS AND DOWNS FROM THE ELEGOO MARS PRO AS IM STILL FAIRLY NEW TO ANY PRINTER TO TECH IN GENERAL BUT I HAVE ELEGOO CLEAR RESIN SO WANTED TO DO SOME PRINTING ON MY NEW BUDGET FREINDLY HALOT ONE I WAS WONDERING IF U COULD SEND ME REPLY ON SETTINGS OR IV EMAIL IN ABOUT SECTION ON CHANNEL IF U COULD I WOULD REALLY APPRECIATE IT THANKS FOR READING MY COMMENT,👍KEITH