Does anyone know if you can get the black steering wheel button trim by itself? I know it comes on certain models, but I'm looking to change it out on my 2019 BRZ PP without having to buy an entire wheel from like a tS or something
Does anyone know if it is a straight up swap for the base model 86 steering wheel, to the gts steering wheel, I would like to use the control buttons to operate the stereo.
This might be a dumb question, but if i have a 1st gen frs/brz that didn't have buttons on the steering wheel to begin with, would i be able to use this steering wheel and have the buttons function properly, or no?
So I recently installed an after market steering wheel on my 2015 FRS. First timer here, followed all the steps to install and realized once I turned my car on it feels looser than the original. No lights come on though. Should I be worried?
Every front pipe on FT86Speedfactory will fit the BRZ/FRS/86 regardless of year. I have the Berk HFC Front Pipe, but the PLM Front Pipe is just fine. If you want to pay a little more the Motiv is great too.
Does anybody know what to do if my yellow clips for the clock spring are broken off and there’s still bits of it left in that don’t allow me to remove it?? 😐
It doesn't add an amazing amount of room. There's another aftermarket wheel that looks very similar to the stock one that is a 350mm wheel instead of 365mm that could help you. If i remember its name I'll update this. I'm also in the market for a new wheel as I'm 6'7" however I'm waiting until I get a new seat.
@@Phymatic I was looking into seats too. The speed shop that I go to suggests Braum for both tall and bigger guys. Thanks for the info regarding the steering wheel.
I can't look it up now but I believe they're Cusco wheels. Few different styles available that retain the airbag at 350mm. I believe the SpeedFactory ones are 365mm but there's not a lot of info on their website about specifics unfortunately. Goodluck with your tall man - small car life. I know them feels.
@@andoniades Thanks mate. I live in Australia so our laws regarding seats are pretty strict. I'd have to look into seeing if the Braum would pass our standards.
also when you disconnect your battery, your ecu will reset and your car will have to re-lern the throttle mapping so your car will drive like poop for 500 miles. nothing is broken so don't freak out
Can’t get my aftermarket wheel to line up even after following the instructions and keeping everything straight after removing the stock wheel. Any ideas or tips?
I have a question for the 2017+ steering wheel when you're taking them apart and take of the plastic bit with the buttons, are the buttons stuck on the plastic or can you remove them to paint the plastic that is connected with the buttons, mine is silver and I would rather want it black, that's why I'm asking if I had to tape of the buttons or if I could remove the buttons from the plastic to paint them?
@@zeffke008 I think the toyota OEM Black steering wheel trim that cost 30$ is only fro 2013-2016 because the 2017+ looks different because of the black buttons, but I still want to know if I can take the buttons of because I'm gonna spray can paint them black myself when I get the time to do it
@@zeffke008 if you google 2013 steering wheel and 2017+ and look at the middle part and see the difference.... there is a huge difference, I own 2018 and I have had SOO many problems finding front lip, spoiler and stuff for the 2017+ because there is so much that does not fit between facelift and prefacelift versions :/
@@FTspeed I'm interested in upgrading my 17 base to lcd cluster, would I do this but instead of removing the wheel, remove the 2 screws for the button trim and replace the buttons and plug and play? Really not trying to mess with the clockspring and wheel assembly
@@jedifar To remove the instrument gauge cluster you dont have to remove the wheel. Watch this video to see how its removed - ruclips.net/video/SzcI2piuojs/видео.html
I just saw the price for that awesome looking steering wheel and it is $499 OMGosh 😲 😲 😲 Way out of my range and after I import it, it will be twice that amount 😔
I know the steering wheel specifies 2017+ but is it by chance still compatible with the 2012 86 GTS? I'm looking to replace my head unit & getting a steering wheel with media controls on it. Was hoping to stick with the OEM versions if I could but might go after market if it's easier to get/find here.
Авто/Мото
My brain: understood
My hands: no, you don't
Keep up the great content! And the bloopers at the end. High quality editing!
Nice Tutorial - really easy to follow. Thank you very much for that!
My wheel was peeling when I bought it, I'v been looking at FT wheel and it looks great.
Is there anyway you can do an update video for the new foglight kit please
Thank you!! Im so excited!!
Great video! Made it looks easier than it is in my head! I think one final note to add at the end to reminder to reconnect the battery?
Good thing this exists because that’s the same wheel I want to get
6:52 that is sick!!! Pause it and look at that beautiful beautiful steering ahhhhh it just makes me relaxing and gives me the chills man
That look really good. Thanks for the instructions.
Just ordered one, can't wait to install it 😎
How to rewire aftermarket headlights for frs/brz/gt>s86 with or without hid setup pls pls pls!!! Some love for aussie fans too 🙏🙏
You guys should do a how to install an aftermarket seat tutorial
where did you get the black steering where trim from? i cant find it on your website
thanks helped a lot. had to improvise a little because i have paddle shifters but i managed
kari matthiasson did u have to remove the paddle shifters?
Really wanted a vertex quick release steering wheel but is it worth taking out my airbag on my daily? This could be a second option
Does anyone know if you can get the black steering wheel button trim by itself? I know it comes on certain models, but I'm looking to change it out on my 2019 BRZ PP without having to buy an entire wheel from like a tS or something
What’s the rims you have set up on here? They are beautiful and I wanted the same but possibly in white
Does this work the same for automatics w/ paddle shifters?
Is there a way you can do this with the auto and keep the paddle shifters?
Does anyone know if it is a straight up swap for the base model 86 steering wheel, to the gts steering wheel, I would like to use the control buttons to operate the stereo.
Looks amazing
do i need to take everything out just to paint the silver part black?
This might be a dumb question, but if i have a 1st gen frs/brz that didn't have buttons on the steering wheel to begin with, would i be able to use this steering wheel and have the buttons function properly, or no?
When are the steering wheels for 2013-2016 versions going to be back in stock?
i’m getting a 2012 mitsubishi eclipse, i want to replace it’s steering wheel would this method work for me?
that looks relatively easy with your demo.
So I recently installed an after market steering wheel on my 2015 FRS. First timer here, followed all the steps to install and realized once I turned my car on it feels looser than the original. No lights come on though. Should I be worried?
How is the steering trim black, i thought they all come in silver
could you guys show how to install the facelift steering wheel into a 2013 brz without the facelift cluster?
you guys ever gonna make a round one without the flat bottom?
Are those wheels smaller diameter than the stock unit?
What headlights are those in the beginning of the video?
Thanks for the tutorial.
I need help my stock wheel doesn’t have the wheel side buttons
dose 2018 steering wheel fit in 2015 model
so my airbag light came on. did i do something wrong?
What are things to consider when buying a front pipe? Or is it one size fits all? Thanks guys I love the store 🙏🇺🇸
Every front pipe on FT86Speedfactory will fit the BRZ/FRS/86 regardless of year. I have the Berk HFC Front Pipe, but the PLM Front Pipe is just fine. If you want to pay a little more the Motiv is great too.
Does anybody know what to do if my yellow clips for the clock spring are broken off and there’s still bits of it left in that don’t allow me to remove it?? 😐
Will this fit on a 2013 FRS?
Is there a button delete one can buy?
Can u make a video on how to change automatic transmission fluid please
Is there a carbon fiber + alcantera steering wheel for the '12-'16 frs/86? Not a fan of leather.
If u go on their website they have more steering wheels for the 16 and under models but yes they have that same one for the old gens
Does every car have the same 17ml nut?
Did you guys tinted the healights or blacked out the headlight housing? It looks super nice
www.ft86speedfactory.com/ft86sf-led-headlights-w-sequential-turn-signals-2013-ft86.html#.XThu0uhKgkk
What head unit is in the video?
Good, this should help my 6'3" self with the rev-matching (leg hits the steering wheel)
It doesn't add an amazing amount of room. There's another aftermarket wheel that looks very similar to the stock one that is a 350mm wheel instead of 365mm that could help you. If i remember its name I'll update this.
I'm also in the market for a new wheel as I'm 6'7" however I'm waiting until I get a new seat.
@@Phymatic I was looking into seats too. The speed shop that I go to suggests Braum for both tall and bigger guys. Thanks for the info regarding the steering wheel.
I can't look it up now but I believe they're Cusco wheels. Few different styles available that retain the airbag at 350mm.
I believe the SpeedFactory ones are 365mm but there's not a lot of info on their website about specifics unfortunately.
Goodluck with your tall man - small car life. I know them feels.
@@andoniades Thanks mate. I live in Australia so our laws regarding seats are pretty strict. I'd have to look into seeing if the Braum would pass our standards.
Is there any chance we’ll see this or any of the other steering wheels with orange stitching to match with the 860 Edition?
Aaron Overmeyer I can make you a custom wheel if you are seriously interested.
Is it possible to make those buttons work in a car that didn't originally have buttons?
Luxotica yes wait till it’s nighttime, have a good sleep, try to dream while you sleep, make them work in your dreams.
Is it the same with paddle shifters ???
Yes
Would this work with an auto BRZ - are the paddle shifts with the rest of the controls or mounted to the actual wheel
Some one showed me a pic wherethey did it on their auto. So i believe it works the same
*takes out airbag* my brain: "BOMB HAS BEEN DEFUSED"
also when you disconnect your battery, your ecu will reset and your car will have to re-lern the throttle mapping so your car will drive like poop for 500 miles. nothing is broken so don't freak out
are you sure?...
@@jpev94b its happned to me twice, leave the battery disconnected for longer than like3-5mins
What if after changing it, my traction control light is on and the abs light at the same time ?
@@joseibalhernandez8002 same thing happened to me just now. Any updates ?
Can’t get my aftermarket wheel to line up even after following the instructions and keeping everything straight after removing the stock wheel. Any ideas or tips?
Same problem here 😢, did you found a solution? Pls help 🙏🏼
7:01 ahhhhh soooo coool
What's the torque spec for the 17 mm bolt on the wheel ?
Rookie To Pro 1000tq thank me later
Rookie To Pro 29ft lbs I believe
Best part of the video.
*boop*
👌😍
Is there a black OEM part for the steering wheel centre for the 2017 models like for the 2013+
Possibly in the future.
There is an OEM part. It's part of the TS. But there is a partnumber you can order.
I have a question for the 2017+ steering wheel when you're taking them apart and take of the plastic bit with the buttons, are the buttons stuck on the plastic or can you remove them to paint the plastic that is connected with the buttons, mine is silver and I would rather want it black, that's why I'm asking if I had to tape of the buttons or if I could remove the buttons from the plastic to paint them?
Alexander Arason id like to know aswell, they have for 30$ on their site a black trim piece, however can we transfer the buttons with those.
@@zeffke008 I think the toyota OEM Black steering wheel trim that cost 30$ is only fro 2013-2016 because the 2017+ looks different because of the black buttons, but I still want to know if I can take the buttons of because I'm gonna spray can paint them black myself when I get the time to do it
Alexander Arason i ordered it for my 2019, if it really only works for 2013-2016 it is false advertisement because on their site all they say is 2013+
@@zeffke008 if you google 2013 steering wheel and 2017+ and look at the middle part and see the difference.... there is a huge difference, I own 2018 and I have had SOO many problems finding front lip, spoiler and stuff for the 2017+ because there is so much that does not fit between facelift and prefacelift versions :/
Alexander Arason i know your pain.
I did see the difference however I trusted the site that said it supports all 2013+ models
Who else got a brz? 🙌🏽
:D
I cant drive yet 🙌😢
I wish I had multimedia controls on my steering wheel MY2012 :(
I noticed the steering wheel had a darker button panel, is that on the website or coming soon?
Possibly ;)
@@FTspeed I'm interested in upgrading my 17 base to lcd cluster, would I do this but instead of removing the wheel, remove the 2 screws for the button trim and replace the buttons and plug and play? Really not trying to mess with the clockspring and wheel assembly
@@jedifar To remove the instrument gauge cluster you dont have to remove the wheel. Watch this video to see how its removed - ruclips.net/video/SzcI2piuojs/видео.html
What about paddle shifters?
Marcos Cobian lol they still need to make those would love to see it
stanley oleyte same, but my frs comes stock with paddle shifters to the steering column.
Marcos Cobian ok
That took longer than 2mins Thomas :P
Where do you get the black trim I have a grey one on my 86
You can get black trim on ft86 speed factory or on dealer parts websites. They are expensive as shit tho, just letting you know.
Mario Paul its 30$ on their site
How is that steering wheel trim black when mine is silver? And where can i get the black one
www.ftspeed.com/part/su003-04253-toyota-jdm-oem-black-steering-wheel-trim-2013-ft86#.YG8SWehKiiM
@@FTspeed Do you guys have the 2017+ trim? I have a 2020 86
I just saw the price for that awesome looking steering wheel and it is $499 OMGosh 😲 😲 😲
Way out of my range and after I import it, it will be twice that amount 😔
I know the steering wheel specifies 2017+ but is it by chance still compatible with the 2012 86 GTS?
I'm looking to replace my head unit & getting a steering wheel with media controls on it. Was hoping to stick with the OEM versions if I could but might go after market if it's easier to get/find here.
you know those ppl that say first without watching the vid even when they arent first.... so annoying... first
what if u got paddle shifters?
Get a stick.
532233308 😂😂
It’s the same thing nothing changes, I just did mine yesterday!!!
@@ramcyescorcia9051 Is there extra wiring for the paddle shifters? and do the paddle shifters disconnect from the steering wheel all together?
Ramcy Escorcia Alrite just did
does the horn still work?
Yes
is this the same for a 2014 frs??
Yes, its the same process. The steering wheel trim on 2013-2016 is slightly different, but come off the same way.
Are there any options for automatic steering wheels with pedal shift?
That would be nice but I don’t think there is any company doing that atm
yo where the close caption im deaf tho
Yeet
Fuck you
@@mr.wiggles7535 no fuck you
Did someone say fuck me?
I want the original wheel if anyone's selling:p
but i dont want these buttons ? i want a blank momo steering wheel with no fucking airbag shit for track racing ....
Plese torque the wheel nut to factory setting or u could be in for a world of trouble
what is the torque spec?
Stop it! Stop changing parts.