Mobula7 1S // Huge Whoop Updates // No Yaw-WashOut
HTML-код
- Опубликовано: 2 окт 2024
- Wow! Not just another iteration on our fun whoops.
Mobula7 1S Available From the Below Resellers
RaceDayQuads - bit.ly/3MQ6izz
GetFPV - bit.ly/3oO1fYs
GoodVentureDrones - bit.ly/3Lak4vm
MakerFire - bit.ly/3rgkkBa
AliExpress - bit.ly/3HlwQF6
Banggood - bit.ly/3IZ2t7V (Use Coupon: "BGRCDrones6" 6%OFF, New Customers Use: "BGRCNew11" 11%OFF)
---Canopies---
NewBeeDrone Canopies - bit.ly/34cXDoB
RaceDayQuad Canopies - bit.ly/3gcvaSt
GetFPV Canopies - bit.ly/3Hnw9Ll
----Mobula 7 V4 Frame---
GetFPV - bit.ly/3KURT3o
Banggood - bit.ly/3Hshu1K
RaceDayQuads - bit.ly/3ojFrkd
Nathan Loopz Mobula7 1S Video - • Mobula 7 Elrs Freestyl...
Shogun Emperor FPV Mobula7 1S Video - • Happymodel Mobula 7 1S...
Infinity Loops Channel - / infinityloops
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use the Jumper T-Lite bit.ly/3ohjEXp
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc 
Наука
Links to the Mobula7 1s and the other components I weight in the video are in the video description as well as below this comment.
Tell me. Surprised? Underwhelmed? On par?
Mobula7 1S Available From the Below Resellers
RaceDayQuads - bit.ly/3HnvBp1
MakerFire - bit.ly/3rgkkBa
AliExpress - bit.ly/3HlwQF6
Banggood - bit.ly/3IZ2t7V (Use Coupon: "BGRCDrones6" 6%OFF, New Customers Use: "BGRCNew11" 11%OFF)
----Canopies----
NewBeeDrone Canopies - bit.ly/34cXDoB
RaceDayQuad Canopies - bit.ly/3gcvaSt
GetFPV Canopies - bit.ly/3Hnw9Ll
-----Mobula 7 V4 Frame----
GetFPV - bit.ly/3KURT3o
Banggood - bit.ly/3Hshu1K
RaceDayQuads - bit.ly/3ojFrkd
Nathan Loopz Mobula7 1S Video - www.youtube.com/watch?v=7d7fc...
Shogun Emperor FPV Mobula7 1S Video - www.youtube.com/watch?v=f2Jgm...
Infinity Loops Channel - ruclips.net/user/InfinityLoops
-
-
I'm kind of curious why almost everything on aliexpress has gotten more expensive compared to banggood
@@___echo___ yea, it used to be cheaper. I don't know why the change.
Hi Nick, are these new motors still bushings or do they have ball bearings?
@@Therberg2500 Still bushings
I have learned that I prefer the 75mm whoops. My TinyHawk II was my first drone and find I enjoy flying it more than my Mobula6.
I wish the other drone companies would due like Emax and use rubber bands to hold the batteries. It makes it much easier to try all sizes of batteries.
Dang...another quad I have to get! Haha I feel like everything that's coming out the past couple months is just awesome! Also, I love that you and the guys from Infinity loops are shouting eachother out and promoting each others videos! So awesome to see that kind of love and support in the community, especially between a few of my fav members of the community!
❤
Hey bro I'm from Guyana in south America can you help me get a drone
I was just going to build another 75mm Mobula , but then noticed the new Fc and the new motors/VTX , so had to order this one ! Luckily they are in stock already in the UK and shipping ( HobbyRC ).
I love my Mobula 7 so much that I rebuilt it with 0802.5 motors when a motor smoked!
I put some 1102 10,000kv motors on mine. It's a beast!
My levels of excitement for this whoop is insane. I'm on the preorder list. I'll be watching the mailbox until then 👀
😆 thanks for the sneak peek Nick!
Where did you pre-order from?
@@NickBurnsFPV MakerFire
I'm in your shoes.
BTW I know one Nick who has two of them. just saying
@@InfinityLoops it’s open for order on RDQ. Mine has already shipped!
Dang it! I guess I’m gonna have to beak down and sign up for one of these. When Mr.Burns gets this excited about a Whoop, It’s time for me to get an updated whoop. Honestly, that’s some of the best “Analog Video” I’ve seen on most any quad.Awesome Piloting and Video production Mr.Burns, thank you for all you do. I hope You and Your family are well.
Thank you. My apologies to your wallet :)
Nice whoop and nice review, Nick. In my experience, my Rapidfire module always results in an overall washed out and muddier picture, no matter what camera I’m using. My much older True-D module has a much sharper/higher contrast picture quality, but I stick with Rapidfire because it has better reception in most situations. Still rocking the old HDO goggles btw.
Hi Nick,
Nice you appreciate the V4 frame, I do my best for them to make logical ducts design this type, I'm just sad they didn't rotate the motor mount 60 degres as I asked, and also they make the battery tray this low (unfortunately only way to fit all their different connector layout).
Bigger battery fit, 450 530 cells are the widest of the 1S.
I doesn't agreed on cam being better lately... nothing new since Ant and pico razer, and nano 3 is clearly worst than what it's been. And be warned builder, Runcan will remove the mounting holes so no way to mount it on mobula 6 canopy (Happymodel will still provide cam with holes 🤔)
Caddx beetle and akk k19c weren't bad at all 3 years back.
And like you said great setup but nothing new beside range compared to 2 to 3 years old setup... and 3 years asking to happymodel to release one 😢
See ya !
Nice ideas for improvements. Its not just ELRS thats new tough. Okay you could take an "older moblite7 and add an elrs receiver only adding 0.5g more. Its the 12A ESC"s that are a big step forward and UFL antenna plugs and more Power output on the VTX. Only time and testing will tell if it holds up but these are many improvements
🤔
@@chrisbee5481 Yes, ELRS, UFL, 12A... 1.5mm shaft but still brass bushing...
And 24g with one of the most terrible whoop cam ever produced... ridiculous/cheap choice on a whoop with ELRS and 400mw.
Yes you can change it, and pass the 25g limit, and what happen when you pass this limit on a 75mm whoop ? washout are back !!! yes triblade can improve that, but it's now 26g, have lost tons on power, agility and flight time... 👌
Once again this is what you can do since 2019 :
ruclips.net/video/DUcHWxbaqvU/видео.html
Try cnhl 1s 450mah batteries - standard voltage (not high voltage). In my experience, they are soooo much better than the gnbs. My almost 2 year old cnhl 1s lipos give equal or better performance than a new gnb 1s HV I bought for testing, and the cnhls are only about a gram heavier. They give longer flight times and much less sag. They also take a ton of abuse, don't even puff up after going down to 2.8v multiple times and still fly and perform perfect. Awesome batteries!
Got my elrs one on order from banggood, super excited
I put my Mob6 HD components into a Mob7 frame and props last year and thought it flew much better but still a little slow due to the HD weight.
Fantastic flying, Nick! Great review!!! 😃
Pretty fun little quad! I loved it!
Stay safe there with your family! 🖖😊
haven't seen you this excited about a new quad in a while. On the USB stability issues...Try using a powered hub and plug all your things into the hub as a work around.
I use a powered usb hub by default. 🥲
Okay, that little booger rips!…lol
I've been telling anyone who would listen that 75mm whoops are perfect for beginners or people looking for a fly anywhere quad that's durable, but until now there hasn't been a good BNF in that space that delivered on everything that size can do. The 1.5mm motor shafts solves once of the biggest problems people have at that size, and the 12a ESC will hopefully lead to more durability too.
Thanks for the review as always.
Dont get too excited. These Mobula7's are cheap crap! I have been thru three of them so far and all three FC have gone out before 10 flights and one of them was DOA.
@@jeffames2880 I ordered one and it had problems out of the box. I haven't bothered getting another. With HappyModel it's usually best to wait for the second or third revision. I made an exception because I was excited about the product.
That sucks you had so much trouble. I really wish there was a reliable ELRS whoop out there for people.
Is there an internal Mic on the VTX of this drone or are you recording the sound around you? Looks awesome, i just ordered one. Going to be my first whoop or basically anything smaller than 4/5" fpv drone. So i'm excited to fly it already once it gets here. What brand and size batteries do you recommend running? Do you use 1S or 1S-HV? The stock battery lead connector is PH2.0?
I see the 1S batteries are all over the place with reviews, especially about them not lasting too long after a few charge cycles.
I ordered the ELRS version and i got a HappyModel ELRS JR module for my Q X7 because all I currently use is that and my TBS Tango 2 which has the built-in crossfire..
Eventually i will mod the Tango2 to add 1W internal ELRS, as well as add the external module bay on the back, that way i can even use it for almost everything.
Or i will pick up a new Radiomaster Boxer ELRS 1W internal and call it a day lol.. I also like the Zorro, i like the smaller TX's, but i just wish they would update it with the 1W ELRS module internal like the Boxer and the new Pocket is 1W too i believe..
Sound comes from secondary camera and blend in through post flight edit
greaat video nixk AS always!!!! Stay blessed brother and thank you for everything you do...Keep on Keepin on
Most enjoyable videos in the FPV scene are the Nick Burns ones.. it is what it is. There is a lot of good content makers but some are just born to talk infant of cameras. Thank you for the great videos!
I was wondering if there is a shop selling the XILO 450mah to Europe, is there an affiliate link for 'em?
I am not certain of a shop in the EU selling xilo batteries. I believe Amazon does carry them sometimes. Otherwise we have banggood from China but not aware of an eu specific store.
Definitely excited to make a toothpick style frame for this. The only problem is i cant find one that's in stock.
We will likely see more stock soonish as the CNY holiday is now over.
I am new to FPV but years of experience with large drones. Several questions: What are those ugly red lines? Interference? Is the video saved locally in the drone too without that ugly video noise? Any way to prevent that? Any whoop with better resolution? Thanks.
This is analog which is the lowest latency video link in fpv. I am not sure what the red lines are referred to. Analog break up looks much like old static on TVs. The video is not saved locally on this one, most modern micros don't have that ability, for a time manufacturers were making dual function cameras that did record on board video but the image quality was greatly reduced in the goggles and the fov was less. the video is only recorded on the goggle dvr now days.
Awesome! A few years ago I took my first Mob 6, stuck it in a 7 frame, and had what I thought was the best Flying whoop ever. I'd wondered why Happymodel never made a 1s Mob7, as it seemed to be a popular conversion. Sadly, i no longer have that drone, but have thought of replacing it from time to time. Now with the announcement of the HDzero 1s VTX, I've been thinking about building another, and then I see this! I think it's time for a new drone.
Yep! I have one version of the mob6-7 conversion. Heads from infinity loops swears by them (it's his go to build) and I was lucky enough to have him help me out with it! We took the moblite6 guts and motors and put it on the mobula7 v2 frame with a newbeedrone canopy and added the ELRS EP2 receiver. He named it the "Mobthicc" and it's still the most fun and best flying whoop I've had! He has a video that's dedicated to this build on the infinity loops page! Check it out, totally worth the few mins!
So it only took them 2 years to take my advice? 👌😂
@@NickBurnsFPV haha! Yep!
I did the same swap mob6 to mob7 frame, just updating to elrs so really I must have to purchase this one, almost cheaper than my own build. Just need new lipos.
I think my next whoop may be HDZero. I'd like to see how that will work on this guy, so looking forward to that video.
Looks you're pretty locked in with it compared to the most of the stuff you fly, but you do have to stay at full throttle when you do the 8s at the yard. Not sure what to think about that but I'll try and use your link when it becomes available and I buy one. Mwha 😂
Battery voltage got lower and lower. I think that clip is like 40-50seconds. With the last 10 or so being full throttle. I think I was doing some general flying before that pergola dance started. 😅
Just got mine today and ohh man does it rip.
wasn't quite ready for that, thought it was going to be like the 6.
yeehaw...
Was wondering what Battery you are recommending for this guy,
I had some "Alien" 650 15g ph2 batteries. worked great got 4 min flight time.
But yeah... I might just get another as a backup,
So Much nicer than my old Meteor 75, I liked those enough to buy 3 of them.
Good to know your enjoying it. I like the flying weight of the 450...the xilo batteries I show in the video are new and get me good performance and flight time.
Wrap skinny batteries with electrical tape to tighten up.
Been trying to find this quad for a month… Hate ordering from bang good when are the US retailers going to get this bad boy in stock??
I don't have any information on that. I would email your favorite fpv shop and see if they will provide an update.
I think this is what I have been waiting for, looks sharp.
This should lead to more improvements sir
Can I fly this drone with a controller from FrSky? Or is the zorro the best choice for it?
It largely depends on the radio firmware, frsky got rid of d8 mode which nearly all micros with frsky need.
I really think about buying this little quad but quick question... Will this battery tray fit BetaFPV's 450 mAh BT2.0 lipos? I'm thinking about replacing the pigtail to BT2.0 as I already have some BetaFPV equipment.
Yes it will. I don’t find betafpv batteries perform as well as others 🥲
Hi Nick I am really very excited for the release of this new drone! On my moblite7 I have already mounted an elrs ep2 receiver so I don't know if I should buy this last version.
However, for small batteries, I solved the problem by using small bands.
You can use them both all around the canopy and either just put them on the lipo to add grip and thickness.
That little stinker flies on par with my 2S Mobula 7, but with around 20g less weight. I'm really considering grabbing one alongside a bunch of 1S batteries.
I have it for about one month now and YES, is the best whoop I had. Its very durable( feels like indestructible) , a joy to fly and good price for what you get in specially the parallel charging board for 1s batteries.. Better then Emax whoops out there.
LOL you're plenty fast to me. :D I can't fly that fast in the house, too many obstacles!
Just ordered from rdq this morning. This might be one that is hard to get soon. Till then I will keep enjoying my beta 65 pro.... the 65 pro is amazing in my small space
Oh man bought this thing just for the board haha. Wouldn't mind the extra cam either but can't wait to put this in my 1s monster. 40mph top speed, 3-10min flight time landing at 3.7v already, so saving more weight coming from r-xsr and separate vtx should be nice.
Your flying is so wow so controlled. Wich rates do you use .
pitch and roll is 1.2 and super rate .75, yaw is 1.3 and .8. All betaflight rates.
@@NickBurnsFPV thank you for your time and respons.
What are your favorite 3 1-3inch Quads ?
Great content btw
Hmm. Very difficult to answer. I can give you two. The mobula7 1s elrs, and the rocket race 2s. Rocket race is a build, a pretty simple build if we use the uz85 components. The third is a struggle right now.
@@NickBurnsFPV thank u very much
Thanks for the review. Always looking for good 1s whoops. For your USB issue have you tried to delete your whole USB hub in "device manager"? Then just scan for changes and it will reinstall the drivers. Imess with a lot of development boards and install a lot of board communication drivers and have to do this sometimes. Also, make sure windows has all patches installed through Windows update
That is flying great for a 1s whoop!
i seen 2 skips at 1.48 snd 2.51 , from the dvr counter on the 04x. As far as that whoop,, you sucked me in and I ordered(reserved)mine.
Are those times of 1:48 and 2:51 on the osd timeline during the dvr comparison flight?
@@NickBurnsFPV yes
@@shakeymikesadventures6793 Gotcha thank you. I went frame by frame over the first 30 seconds, it appears spot on to me up to that point.
Try good fresh 300 mah batteries :-) I bet you will have that same 4-ish minutes of flight, but the whoop will be a bit lighter and quieter :-) At least, this is my experience with my 75 mm 2-blade 1s build.
I have the ELRS version. It's fun but the FC seems dodgy. I have to plug/unplug the battery multiple times to get the VTX to work. BTW: I fly with HV GNB 530 mah ( GNB27 ) and they fit fine and fly great. I changed the PH2.0 to the GNB connector.
so you hear the esc activate tones and no video?
@@NickBurnsFPV Sometimes the tones chime and no video. Sometimes no esc tone but quad will still arm and motors turn. Unplug, replug, do the dance of hope and just maybe video will happen when you next plug in the battery. No rhyme or reason I can find.
@@TakeItToTheGround Do you ever plug in and no lights on the FC? I am wondering if the connector isn't making sufficient contact. I have had a few gnb27 connectors that didn't always power on an FC, I had to swap the connector to solve. it.
@@NickBurnsFPV Connector not the issue as 1/ It did the same think with the PH2.0 2/ Lights come on and sometimes motors can be started but no vtx. Thanks for the replies. I suspect I have an FC on the cusp of total failure seesoring between the two.
@@TakeItToTheGround yea, you have made the troubleshooting rounds, sadly just and aio that isn't working right.
Mine is out for delivery tomorrow along with some Tmotor 0802 25kv 😉 Great video as always Nick, so good infact I've ordered a second one 😉
Is that a parallel or a series charging board like the flying sandal or fractal engineering boards? Looks like a series charging board. I kinda of hope so those other ones are hard to get.
Is technically series but commonly sold and referred to as parallel,just like the others you referenced
@NickBurnsFPV I'm convince GNB outright lies about their battery capacities which is why they are the same size as smaller bats from other brands
Top notch review Nick! Maybe it's just me, but it appears to my eye that Rapidfire has a softer image than some other modules. I have a TBS Fusion so I don't have personal experience though. Point being, maybe it's not the Orca DVR, but actually the VRX module thats giving the softer look? Might be interesting to compare the RF VRX in the 04X's. Maybe even try the Skyzone VRX in the Orca's!? (if it fits)
maybe this spring when I can hang outside more and we have more colors.
I dont know if it's justified if you already have a new Mobula 6. I actually found that replacing the old camera and old motors on the new Mobula 6 is a very good option. I dont like the new RC3's as you pointed out and I didnt like the new smaller motors on the M6. I found you need a lot more throttle response for stable flight. But I do like my new/old M6. As always another great vid.
Regarding the battery slippage you could put a piece of scotch tape around the battery to make it tighter. If that's too loose you could try a small piece of electrical tape which will be a little thicker.
Nice! ... bi-blade & elrs seems to be a good tren for whoops now. I saw consistent flight without washout in your flight nick. I guess this is the best bnf M7, great stock tune out of the box!
a 75mm 1s will not have more flying time than an 85mm 1s..simply because prop diameter generates efficiency. the larger the prop, the more thrust given everything else is equal. enough pseudo science!.
Awsome review! Your not slow at all BTW :)
maybe not slow, but nearly everyone I see whoop racing would lap me :) Thats okay I still have so much fun flying.
HAPPY to finally see a MODEL having an FC with vtx and ELRS built-in.
SAD that it's not available for purchase today.
DREAMING that one day soon an HDZero version be on the horizon, until then
CHEERS, Nick, and thanks for your time.😉
Nick im trying to buy the iflight Nazgul 83 mm pro you did a video last week and i cannot find it so i can enter ypur code so you can get paid??? I need the best packs to buy also.
I think your logic might be off, Mr.Burns. If the Skyzone goes down first, that means the Skyzone is closer to real-time, not further behind. The first one to go out is the one that is in better sync. The Orqa is just so far behind they don't even realize there even was a failure until a few milliseconds later.
You can't determine which DVR is off only by which one cuts out first in a crash, one may have missed frames making the recording shorter (which is the most likely), or the other one could have inserted duplicate frames. But he says twice in the video that he compares the DVR to audio from a different camera, and the Skyzone DVR cuts out BEFORE the audio registers the crash. So since the Orqa DVR agrees with the separate audio stream and the Skyzone doesn't, the Skyzone must be dropping frames.
Hi nick
Im not sure if you have done a video on the beta flight meteor 75 pro elrs.
If you have flown it how would you compare them both plz.
I have its here ruclips.net/video/OF5t2QvYePA/видео.html this is better. As in the video "the best 1s whoop I have flown" :)
that color issue is because of the rapidfire its been known to cause that unfortunately.
Hi nick hay quick question, on that charging board it comes with if you plug in 4 1s batteries then plug it in to the charger do you set it to 4s and add up the mah and charge like that to balance?
No we don't need to add up the mah. The charger should be working of the voltage. Depending on the charger we may have to set it to 4s, and charging board dial to 4 if we have 4 batteries plugged in.
@@NickBurnsFPV thanks nick 👍
Hay nick I forgot to tell you I got the mobula 7 1s, flew it you are right it's the best Flys like it's on rails. The best whoop iv flown.
Hi, what do you think about a 65mm toothpick style quad with 40mm props? I designed, 3d printed and built a drone like that and it flies amazing, it just has a bit of wash out when recovering from dives, but i can't explain why it flies much better than the frame i had before, which was a TKS 75. It might be the weight (4g vs 2.4g) what do you think it is? Thank you 👍
Like this? ruclips.net/video/ah8SahLPS2Y/видео.html
not a parallel charging board, its much better.
Thank you for this great review!
I ordered it as soon as you asked for "questions, suggestions, otherwise".
Today it arrived!
The frame is very promising with the thicker supports orientated vertical instead of horizontal.
The new motors with 20000 KV as well!
The whole whoop is a blast! You were NOT exaggerating!
The only points about the whoop that could be improved out of my pov:
Secure the antenna: why no manufacturer does it?
Other battery connector (personally I am on BT2.0 for 1s)
Finally a comment to the 1.5mm motor shaft. I really like it and already have it on most of my whoops. But the choice was very limited! The only once I could get are the URUAV branded EX0802 with 19000KV (spares or used on the UZ80). Really nice that there is now another and even higher KV choice!
P.S.: Nick Burns 🔥 = best drone channel
A couple of things you can do for the loose-fitting batteries is to either wrap a rubber band around the pack a couple of times lengthwise to make them thicker, or heat up those bottom cross braces on the battery tray and push them in to deform them so they're concave.
it be cool if they had races where no one gets to practise the tracks so its a suprice for everyone
i played a bit of liftoff and noticed when you rip trough a track on muscle memmory its much less satisfying than when you fly it not knowing what to expect
The motors don't have ball bearings from what I understand,😥😥 They have brass bushes and I don't know how much they will last. I like with ball bearings!!
To bad because I like the quad and motors that have 1.5mm shaft.
I don’t believe any 0802 or smaller motor have ball bearings. The new 1002 motors do have bearings
@@NickBurnsFPVThanks alot and sorry I ask you to much
Yah I also think is like this, so maybe I ll buy betafpv85 elrs that have 1103 motors with ball bearings.
Anyway from your experience are motors with bushes reliable.?
@@stelic9515 more reliable than brushed motors. Motors with bushes do wear down over time. If its 100 or 200 or much more i can't say. We don't have other options with 0802 motors.
@@NickBurnsFPV Understand and thanks again alot
Thats some brilliant flying and brilliant review as always man! Thanks for the mention too!! 👊😘
You think the gnb 1s 450mah 80c/160c Lipo will work good with this drone?? Looking for some extra batts with a little more punch!
Need some suggestions !!
Yes, I use many gnb batteries, mine have seen many many flights.
@@NickBurnsFPV awesome!! What’s the best mah for the 1s. I know the tune is specific for the 450mah?
@@NickBurnsFPV also what’s the difference in power from the lipo and lihv?? Flight time? Overall performance?
@@Taboloncawonthemasters I think 450 is best. Lipo is standard voltage 4.2volts, hv is high volt 4.35. I only charge my 1s batteries to HV.
I've been using the original mob 6 AIO on my 75mm build since launch, it's been flown to death over 3 frames (mob 7 V2) and a couple sets of motors with qaud blade props and it still hasn't popped 🤷♂️ 12a seems excessive? Otherwise this combination is pretty solid.
You might want to knock on wood. So many report loosing an esc on AIO boards.
I literally just converted my mob6 to mob7 with 40mm bi-blade gemfan 1610 props, within about 30 seconds of flight I was getting temperature high errors in betaflight, amp draw the entire flight was at 4-5a constantly. Clearly the 5a FC of the mob6 just isn't up to the job.
Hi Nick, I can't find the X12 specs.. can it fly 2S as well? Thanks!
No, I am told its 1s only. At least this initial iteration.
@@NickBurnsFPV thanks!
Does anyone know how much mah is in his batteries? Does 550 1s batteries work?
Hi nick, im upgrading my sky03o. To sky04x for the 60fpv svr and better screen. Yes the dvr from sky04x sitll losing frames abit.. but i notice its very minimal.. like in your dvr comparison.. in 3mins flight, it still under 1sec of missing frames if im not mistaken. And thats still very good. But yeah if you dont wNt to lose any frames just use orcas or powerplay.
Looks very smooth and nice but I still think the mobula 6 looked faster and more agile around the house. Outside this looked much nicer.
oh come on. Now you gotta get one and prove me wrong :)
Are 550mAh Battery still good for this?
I Decide between 450 50C or 550 80C
Forget the c rating, it’s marketing. I don’t believe the 550 fits in the battery tray, but that can also depend on the battery brand
is this the same quad as the mob7 1s hd, with that one having 1080p recording? or do they perform vastly differently?
They are different. Weight is a critically important factor for micro quads.
Helloo Nick! You have really nice content. I'm thinking to convert my mob7 to a toothpick. I will use crux3 frame with 1202.5 motors. Will it work on 2s? I don't mind to retune the quad.
It should be fine, the AiO is 1s-2s, I presume your going to run 3inch props. As long as the motor doesn't pull more than 12amps with the prop of choice it will work.
Is the performance between gnd27 and ph worth switching the pigtail on the drone and buying another $20 board GNB27 charging board, or could I just stick with PH2.0 and use those xilo batteries you were using? Also do the JST batteries plug into the PH2.0 connector natively? thanks
there is a performance improvement when using either gn27 or bt2.0 over ph2.0. matching connectors are needed to join them appropriately.
If you could recommend the mobula 7 vs betafpv air75 which would rather go with with?
air75, the mobula7 is now aging tech in fpv
hey Mr Burns, i live in China and there, Getfpv, amazon,... doesn t ship overthere. my only option is taobao. I do have almost everything even cheaper. Now, the problem is that they can send me the mobula 7 with 4*660 GNB batteries but in your video, you do not recommend at all or it will change the tune right? maybe they changed the tune for those specific batteries ? or should i buy it alone and with 4*450 xilo separated batteries? thank you so much for your help! keep it up man !
For fast agile flight the 660 will be somewhat heavy imho. I would go 450
I know this video is old, but the mob7 update is still getting better, first thing to do is swap from bi blades to HQ tri blades. The charging board comes with spots for bt2.0 connectors now that you solder on yourself, and i figured out that the tattu rline 500mah batteries will fit into this frame if you heat the battery holder part of the frame up with a heat gun (CAREFULLY) then stuff the battery in and let it cool, and seem by far the best battery option for this bird. Love this whoop! building 2.5-3" toothpicks on the PNP version of the FC(im on frsky so im stuffing xm and emax tiny d8s into the builds which perform light years better than frsky SPI) and they are turning out pretty awesome.
Nice. Good current feedback. Thank you
Hey thanks for sharing, which tri blades are you using please? Just received my mobula and i have to say i'm impressed with this little thing it handles like its on rails and has plenty of punch. I'm using 550Mah bonka lipos and they fit perfectly no need to heat up battery tray
@@tecnikturbo The HQ press ons. Thats good they fit, its not ideal to have to possibly melt/damage your frame, but its the only way i could get the tattu's to work.
When filming these shots, do you use the camera built into the drone? Or are the recordings made from an SD card in the goggles? I'm wondering because the quality of the drone camera in your videos is so much better than others. And sorry if the question would normally be clear to sb. else, I am relatively new to the hobby. Would appreciate clarification. Thanks
When the quad doesn't have on board recording the goggle dvr is used.
Been waiting on this one looked good on paper 👍 thanks nick
Nick, How is this Mobula 7 compared to the new Tiny Hawk 3 overall? And are the Antennas direct soldered or do they use a UFL clip connector? 🙏 my Friend!
ufl is standard for happymodel on the vtx. Unfortunately I don't especially recall the TH3, my suspicion is if the TH3 is 1s the mobula is far more agile and performanced based.
Nick, have you updated the receiver to elrs v3? Just purchased a Happymodel module for my T-lite and elrs 3.0 is out on the configurator.
I have not updated.
Just ordered mine to rip mu yard and practice. Sim just doesn't do it for me anymore
I hear often that the more powerful the computer the better the sims “feel” but I would rather really fly myself 💯👌
What radio and goggle you using? 💪
zorro and i talk about the goggles in the video.
Are these updates carried over to the hdzero version as well? Thanks Nick, great content as always 👍
No, vastly different quads. 1s vs 2s. The new 1s hdzero board isn't out yet.
Looks like a proper MobHeav7. I'm going to want one!
Mobheav7, as in heavy?
@@NickBurnsFPV yeah, a play on the moblite moniker ;)
Hey Nick, would you please let me get your tune on this bad boy. Mine has pretty bad prop wash. Thanks a million
I am using the manufactures stock tune on all the review quads. RUclips doesn't allow enough characters to send in comments. I suggest getting the betaflight dump from the happymodel.cn website.
Hi, Nick, if you could have One Whoop would you Choose Mobula 6 or Mobula 7 Analog version?🙏
For me between those two the mob7
Just recently got my mob 7 I was really disappointed with how it flew out the box. Flew like it was robotic or something. 😔
by chance are you used to flying in acro and it was in angle mode?
@@NickBurnsFPV I fly both. angle indoor acro outdoors and it only happens in acro mode, I suspect a faulty gyro maybe because my older mob6 has the same problem 🤔 thanks for the reply 😀
@@cheesepizza33 Its an odd thing for me to say, but I wonder what that looks like. I don't think I have ever seen a quad in acro fly roboticly. I wonder if its like if the I gain is way to high.
Just got mine in last week and it flies AMAZINGLY well. I also forget im not flying my 3" or even 5" just like Nick said in the video. It flies like its on rails and even slow flying feels like my Protek35 Cinewhoop. Of course the first Mobula7 elrs I bought crapped out after maybe 5 flights and I had to send it back and wait a few months for this one. I also had a Moblite7 dead out of the box and had to send it back to0. I have VERY LITTLE faith in the quality and durability of these Happymodel drones but the options like this are so limited there is not another choice really.
@@NickBurnsFPV yeah no clue but I flew it completely stock and the only thing I did was change out the ph2 for a gnb27. Also, on infinity loops mob7 1s review in the beginning of his maiden flight he shows how it performs and its exactly how mine flies. He posted a tune in the comments that's supposedly fixes that but I will have to wait and see once these batteries finish charging 😃 cheers!
Could it be 59.94 FPS on skyzone and 60 FPS on orca? In the US 59.94 is a standard rate.
It could, my memory on that detail isn't great. I think I checked the actually fps and they were the same. But in the moment I might not be remembering for certain.
would you recommend 450mah, or a higher/lower capacity?
I like performance. So I stick with the 450mah.
Great Video Nick. Thanks
The usb problem could possibly be from water damage..just a hunch with this but you mention your daughters like swimming maybe one day they were close to the computer and hair was wet and dripped into the usb input socket. many usb socets are on the top of the tower so i could easly see this being the reason why. 😁 Great footage otherwise keep up the great work
Hii Nick
After alot of study I decided I will buy mobula7 1s. I want elrs . The problem is what to choose?? 1 elrs incorporated (spi ) the flight controller is 1s only and have mpu600 giro. 2. No rx version and after to add an ep2 (I like the flight controller is 1 and 2s but it doesn't have mpu600 chip, It have icm20689). I heard the mpu6000 is better.
So what do you think is better option
mpu6000 has been long used and is apparently no longer being produced. We don't have the choice of buying it unless we by older products. As I think your getting started, the difference in gyro is not likely going to be a strong issue to be concerned about. I have flown the mpu6000, bmi and icm. While the icm is more sensitive making physical assembly more important there isn't a noticeable difference in how they fly.
@@NickBurnsFPV thanks alot
Wow this little fella kick some serious tail!!!! Had buyers remorse because I didn't see the V2 1 or 2s... No need I can barely get this guy from ripping!!! Makes my Tinyhwak freestyle 2 feel like a model T compared to this guy!!! Great whoop it's my first and second quad. So many to choose from like neck ties lol!!!
What makes it fly likehat ? Your camera is pointed up in acro .
The quad leans forward to fly forward and the angle of the camera will dictate our forward angle and visual horizon. More camera up tilt more natural speed....up to the limits of the quad itself.
Struggling with this little one today! Finally got it delivered - didn't relize ERLS2.0 doesn't go with my old flash of 1.0 and the 10 other drones that are setup on 1.0 with EP's and etc. :( Don't want to flash the update so i added an EP1 Rx with my v1 firmware --- all rx'd up and boom -- NO VTX !?! Its odd i tried to go over to IRC TRAMP and it suggested "VTX READY=YES" in BF but then no power from on board VTX. I swapped back to Smart Audio (I hate smart audio btw, thus trying to use TRAMP) and #smart audio'd in CLI and on Ports and have "VTX READY = YES" but then I power up and still no on board VTX power. There's zero signal. Any clue ss this board like the old Mobulas where I have to solder two pads together to get the internal VTX powering up ?? Thanks Nick and am inspired by ALL your vids!
I figured it out! Some weird VTX tables out the gates on this on -- 0 Power setting in #1 table slot I don't think it was broadcasting any VTX signal at all on that setting. I changed to match 25/100/200/400 and boom there it was - Video :):):)
Soon you'll be speed running fpv house tours 😅😉
I really should've bought a Mobula rather then a eachine uz65.
How do I unlock my happy model ovx303? Can’t get out of pitmode
It sounds great I might have to get one
0802 and 1.5mm shaft? That my dream since 2018.... And its really come true.... Thanks for the video NB.... Really nice 👍👍👍