Has a single mom of three boys I fix everything on my vehicle so I can show them how to do it I got stumped earlier cuz I didn't have the tool to release the high pressure. Went and got the tool and now watching your video I greatly appreciate you I can't afford to ask somebody to do it for me so why not do it and then teach others!
I appreciate your positive feedback and I'm glad my video helped you. I will be posting more videos in the near future and please don't hesitate to check them out. we need to help each other out with all the bs that's going on in this world. I can already tell that you're a awesome mom. keep researching and fixing any obstacles that come your way. have a blessed day cool mom.
@kemisthekid8782 - I hear the same rattling noise, which likely means the cam follower is bad, but how do I know for sure if it just needs a cam follower replacement OR cam follower plus HPP. No check engine light btw
When I accelerate from a stop my car makes a raspy noise, like it is old and struggling. Any ideas of why? So far I have removed my valve cover and going to put new gaskets on it, they were leaking, I was told by the parts person at Hyundai that the high pressure fuel line had to be replaced, a one and done part. It cost 70 bucks, but I cannot figure out how to remove the bracket.
@@kemisthekid8782 For now until I can find it, when you remove the 19 m/m bolt that holds the aluminum tube onto the High Pressure fuel pump, if you follow that tube from the HP pump to the motor block that is where the bracket is that holds the tubing. I was trying to put a new Aluminum tube in. Thanks for the help.
@kemisthekid- This is exactly what I was looking for, the only thing I am missing as per Manual is How Do we set the camshaft at the bottom position when putting back the cam roller ?
Hello 👋 Mechanic replaced fuel pump camshaft follower in my kia optima 2.0T. Only after that fuel pump started making metal noise:( What can be the reason? Sounds like something is lose inside but works fine…
Is it a must to change the Camshaft follower? I changed the pump but same issue, the truck doesn't want to go over 5-10 MPH without wanting to stall out or no acceleration at all, I'm getting exhaust out of my pipe, so I'm guessing not a bad catalytic converter. Just frustrating.
Hi Great video. Does the cam follower supposed to have a slight rattle or ticky noise. When I removed mine to inspect it I shook it gently and it sounded like something moves in it. Would that be defective?
@@kemisthekid8782 Yes I do have a ticking noise when Its in idle. I have now a brand new HPFP, so I took out the cam follower and inspected it, and gave it a little shake and it rattles. I was wondering if you ever had observed that or is it normal for it to do that?
My sonata makes a quick knock noise when I first started up and making knocking noise between 2500 RPMs up to 3500 RPMs. It’s been doing it for a little while. Any thoughts?
Has a single mom of three boys I fix everything on my vehicle so I can show them how to do it I got stumped earlier cuz I didn't have the tool to release the high pressure. Went and got the tool and now watching your video I greatly appreciate you I can't afford to ask somebody to do it for me so why not do it and then teach others!
As*
I appreciate your positive feedback and I'm glad my video helped you. I will be posting more videos in the near future and please don't hesitate to check them out. we need to help each other out with all the bs that's going on in this world. I can already tell that you're a awesome mom. keep researching and fixing any obstacles that come your way. have a blessed day cool mom.
@kemisthekid8782 - I hear the same rattling noise, which likely means the cam follower is bad, but how do I know for sure if it just needs a cam follower replacement OR cam follower plus HPP. No check engine light btw
I didn't have a check engine light on. once I replace the part, there wasn't any more rattling noise.
@@kemisthekid8782 Yes that’s exactly my question, Why didn’t you just replace cam follower, what made you change entire fuel pump
@@sahasranshupurohit I was getting poor gas mileage
Same here, I will also have to get this done, by any chance do you remember which part number did you use ? 35320-2GGA0 OR 35320-2G740
When I accelerate from a stop my car makes a raspy noise, like it is old and struggling. Any ideas of why? So far I have removed my valve cover and going to put new gaskets on it, they were leaking, I was told by the parts person at Hyundai that the high pressure fuel line had to be replaced, a one and done part. It cost 70 bucks, but I cannot figure out how to remove the bracket.
can you provide a picture of what your talking about?
@@kemisthekid8782 For now until I can find it, when you remove the 19 m/m bolt that holds the aluminum tube onto the High Pressure fuel pump, if you follow that tube from the HP pump to the motor block that is where the bracket is that holds the tubing. I was trying to put a new Aluminum tube in. Thanks for the help.
What size of wrench did you use to take out the bolt on the fuel pump?
Thanks for the video.
thanks for watching
@kemisthekid- This is exactly what I was looking for, the only thing I am missing as per Manual is How Do we set the camshaft at the bottom position when putting back the cam roller ?
it should just slide in
@@kemisthekid8782 thanks my friend, appreciated
Hello 👋 Mechanic replaced fuel pump camshaft follower in my kia optima 2.0T. Only after that fuel pump started making metal noise:( What can be the reason? Sounds like something is lose inside but works fine…
did the mechanic replace the fuel pump with a new one or old?
@@kemisthekid8782 old one left. It was fine. Made no noise before replacement of camshaft follower. It was just preventive replacement…
@@oleglog6927 get your mechanic to put the old cam follower back on and see if the noise goes away. maybe, the cam follower is defective.
Thanks man
Is it a must to change the Camshaft follower? I changed the pump but same issue, the truck doesn't want to go over 5-10 MPH without wanting to stall out or no acceleration at all, I'm getting exhaust out of my pipe, so I'm guessing not a bad catalytic converter. Just frustrating.
I have a Kia forte and my car didnt wanted to go up 50mph and the exhaust seemed fine , but I replaced and now runs perfectly, i had bad cat converter
@@cesarjc83 My Hyundai had a bad cat convertor as well.
@@MrJessejames317Hyundai is a piece of crap
Hi Great video. Does the cam follower supposed to have a slight rattle or ticky noise. When I removed mine to inspect it I shook it gently and it sounded like
something moves in it. Would that be defective?
I know they get noisy when they are defective. when driving, press on the gas and you could hear the rattling noise. I hope this helps. good luck...
@@kemisthekid8782 Yes I do have a ticking noise when Its in idle. I have now a brand new HPFP, so I took out the cam follower and inspected it, and gave it a little shake and it rattles. I was wondering if you ever had observed that or is it normal for it to do that?
@@nathanjefferson9676 the new cam follower was firm and it did not rattle at all.
My sonata makes a quick knock noise when I first started up and making knocking noise between 2500 RPMs up to 3500 RPMs. It’s been doing it for a little while. Any thoughts?
Sounds like a spun bearing, you might qualify for a free engine. Look into the Theta 2 settlement
It’s the timing chain tensioner that makes the noise. It’s like a 3 second rattle soon as the engine starts up
How much is that ?
hello thanks for the video , just only one question , it shows any code on the scanner?
no codes only the rattling sound sir.
@@kemisthekid8782 and if I have the knock sensor code , it have maybe something to be related ?
@@carlosperezmolero4205 what code are you getting?