Proper way to use a hole punch on heavy-duty Hanks Belts full grain extra thick belts.

[@WednesdayCat888]

I made it by following your instructions; successfully punched two holes on my newly purchased belt😁 Thank you.

[@HanksBelts]

That's great! Glad the video helped you out!

[@gregvalcich5177]

I came here to see Hank. Where the heck is Hank?!?

[@Kristijan94]

Thank you sir for the explanation 🙏

[@varonicaspringer245]

Thanks

[@karenmclish7066]

Thank you, that was very helpful. I've recently lost weight and didn't want to get new belts just yet. This will save me some money. 😊

[@HanksBelts]

Glad it was helpful!

[@jalogrono]

Thank you! Great technique. Clear instructions. Saved me from buying a new belt!

[@HanksBelts]

Glad it helped!

[@monkeyking-self-proclaimed7050]

But the holes look like crap and eventually makes the belt go bad.

[@kcottonable]

Start at 1:15 for adjustments; easier than assumed!

[@drwzwy]

I have learnt a lot from your video. Thank you

[@amitkulshrestha2004]

Saved my new punching tool. I was beating my head how to punch my gym belt. After seeing the trick in this video i punched in seconds. Thanks you very much 🙏

[@HanksBelts]

Glad it helped!

[@Greenishprint]

I don't have enough strength( I'm female) or what's the problem? I just can't make that damn hole 😑

[@HanksBelts]

Have you tried to rotate the tool side to side as you squeeze. This will usually cut through much easier than simply squeezing.

[@ansonknam]

Thanks Brian my g

[@sgirl1822]

Where do buy these? Dont see on your website

[@e.j.b.3715]

Thank you, you saved me! My belt looked awful and now it's neat thanks to this video

[@HanksBelts]

Glad it helped!

[@aptrue]

This messed with my belt. Tried another hole without rotating amd went fine.

[@TheFujiwuji]

Where can you purchase the belt hole punchers? I looked on the Hank's Belts website and couldn't find them.

[@HanksBelts]

We do not sell the hole punches but you can usually find them at Walmart and craft stores.

[@TheFujiwuji]

@@HanksBelts ok, thanks. Just found a decent one on EBay.

[@1stPlaceDirector]

Most of the hole punchers that are sold are too small and the jaws don't open large enough for the thick belts.

[@whatiyam]

Can a leather punch cut a hole in a padded dog collar (.5" thick)?

[@HanksBelts]

It should handle it. You may have to rotate the punch while punching is all.

[@redrainn5441]

Perfect instructions! Thank you, sir. ☺

[@HanksBelts]

Glad it was helpful!

[@pushmotivation-__asher1335]

Thanks

[@jivedolilian7314]

The Jvedo hand press machine I use is more labor-saving and can install a round hole punch and a prong for the leather opening. Very convenient and efficient

[@HanksBelts]

Thanks for sharing. For sure if you are doing a lot of holes. If you just need an occasional hole the hand punch is much more affordable.

[@GaryLJones-ki8kv]

Hey…!?! WHAT ABOUT A NAIL&HAMMER…?

[@HanksBelts]

That works also! Just not as neat but gets the job done.

[@pratapdev4295]

Great saved my time trick shared thanks bro 🙏

[@HanksBelts]

Happy to help

[@jessechappell2]

Thank you for making this video.

[@HanksBelts]

My pleasure!

[@chaos696969]

ty so much have learned so much ty again

[@HanksBelts]

Glad it helped!

[@wandalee4092]

Whenever I use my hole puncher the belts seem to separate. Should I line the hole with glue after?

[@HanksBelts]

Hey Wanda, On department belts this may happen and a bit of glue may help. This is not an issue on our belts as we use real full grain leather on all of ours. Department store belts may delaminate though. Thanks!

[@Umrism]

Thanks, very helpful

[@HanksBelts]

Glad it was helpful!

[@ryanshields6253]

The link for the hole punches is coming up as page not found. Are you still selling them?

[@HanksBelts]

Hi Ryan, I am sorry we no longer sell the punches and they are working on updating the video. You can usually find the punches in Walmart or craft stores.

[@ryanshields6253]

@@HanksBelts Thanks for the quick response! I own two of your belts and they are the best I own! I just found your channel, keep up the good work!

[@FrightfulMusician]

Thank you, Brian! Good technique!

[@HanksBelts]

Glad to help! Thanks!

[@usmanriaz9966]

Thank you

[@HanksBelts]

You're welcome

[@TK-ni1pl]

Thank you!

[@HanksBelts]

You're welcome!

[@helsindemisquisfolson1461]

Very helpful information thank you so much. No I know! 😎

[@HanksBelts]

You are very welcome. So glad it helped!

[@kawaiigirlradio3525]

As a person who love adding spikes to things, ive always kinda struggled. But this hella helped!!🩷

[@HanksBelts]

Glad it helped!