10 MM with extensions and swivels. PB blaster to get it loose, flash lights, padding for your knees because your gonna be on top of the engine. And about 3-5 hours worth of cussing 😂. That's what it took me yesterday and this morning. Don't drop the bolt if you do it's a m6 inch long bolt at the hardware store.
My Chevy used to shut off and could cut right back on . But last night she shut off and wouldn't turn back on . I jump her , she can't take complete charge. It will start and shut right back off I bought a new battery months back and the alternator is fine Do you think this is the issue ? Sometimes the car even rattles and vibrates like it's bouts shut off on me but the rpm falls and goes right back up to the one and jus chills there while I'm idle
What were the symptoms of the bad crankshaft sensor
It can be hard to start the car, the RPM doesn't work and sometimes the engine makes a rattling sound.
Stalling when slowing down or stopping.. long crank to start. Engine shaking
I would recommend if you have the money just take it in... I did it in about 3-5 hours. That i would never wanna do again...
What size engine. This looks nothing like my chevy malibu.
It was the 2.5 liter engine
i cant find any vids of the chevy malibu LTZ and u need help
What all tools did you use ?
10 MM with extensions and swivels. PB blaster to get it loose, flash lights, padding for your knees because your gonna be on top of the engine. And about 3-5 hours worth of cussing 😂. That's what it took me yesterday and this morning. Don't drop the bolt if you do it's a m6 inch long bolt at the hardware store.
Hey man would I be able to access it through under the car ?
Yes, but I think you would need to remove the starter and maybe the CV axle to get to it from under the car
@@kavehabedi483 I can't seem to get my hand on the bolt enough to put a socket on it
I used a long extension with a quarter inch swivel head socket.
Once I got the bolt loose I took it off with my fingers the rest of the way.
@kavehabedi483 on my Chevy Malibu when I make a stop on the stop sign, my car turns off and I have to put it in park to turn on the car again
@@SergioGarcia27155I’m having EXACT same issue did this sensor fix the problem?
Hey did the car had 2 crankshaft sensor only one ? And did you have any code that came up that made you change it?
1 CRANKshaft sensor code p0335
My Chevy used to shut off and could cut right back on . But last night she shut off and wouldn't turn back on . I jump her , she can't take complete charge. It will start and shut right back off
I bought a new battery months back and the alternator is fine
Do you think this is the issue ? Sometimes the car even rattles and vibrates like it's bouts shut off on me but the rpm falls and goes right back up to the one and jus chills there while I'm idle
Hi, I’m not sure. You should hook up an OBDII to see if you have any codes first.
It will most likely be some dam sensor you just gotta figure out one or replace each one!
@@got2getit204 camshaft sensor maybe? I jus changed the crankshaft .
When u changed the sensor did it have to be programed
Its easier to get under the car and drop the starter
In my opinion.
No it is not. By far.. it's just as hard getting the starter off imo. I tried from bottom and top.. finally got it from the top after 3-5 hours