I got it! Done and done. Thus concludes my lesson that we should *_never_* use razor blades or other metal tools to scrape any spilled and baked-on resin off the LCD screen, and a pricey lesson it was. Thanks again, Anycubic. :) By the way, what *_is_* the best way to get resin off the LCD screen if, say, the resin seeps through a leaky FEP screen, gets between the FEP tub and the LCD screen and bakes solid while the printer's working? :-/
@@BloodyBay I've never had issue with minis not printing well with the screen protector. If installed correctly (no bubbles) you won't even notice the protector is there, honestly.
@@lakshmikerr887 i bought from them it never sent they claimed it was sent and delivered but the shipping company said they never even got it, nor did i ever get a receipt or tracking number until i fought for it over email and then it all just said it had been signed for and delivered.. it was not
I just got in one for the Mono SE. I had to open a ticket on the Anycubic site and get the link to the exact screen. It took about a month to get here from China. The screen for the SE was $70. They are currently in the middle of a holiday so might take longer to get back to you as a result.
Am I the only one who noticed that 3 swipe of the glass left it all fogged up by the time they finished. Please clean it thoroughly with glass/screen cleaner. May not heavily impact print quality but its not that hard to do it the right way lol
Anycubic started selling them for both the Mono and Mono SE through their official AliExpress store (1 is 6" and the SE is 6.08"). a.aliexpress.com/_BS70St
I can’t find any help anywhere, I’m trying to get a replacement since your stock FEP had a hole in it and on one of my first prints, the resin cured on the LCD and ripped out the polarization layer on the Lcd
"thanks, it was easy" yall are straight up liers, if you say it was easy at least include it took you more than an hour Okay, second time doing this, only took 15 minutes, last time I guess I was just brain dead
I got it! Done and done. Thus concludes my lesson that we should *_never_* use razor blades or other metal tools to scrape any spilled and baked-on resin off the LCD screen, and a pricey lesson it was. Thanks again, Anycubic. :)
By the way, what *_is_* the best way to get resin off the LCD screen if, say, the resin seeps through a leaky FEP screen, gets between the FEP tub and the LCD screen and bakes solid while the printer's working? :-/
@Jack Will a screen protector interfere with the UV beam that bakes the resin to create the mini, though?
@@BloodyBay I've never had issue with minis not printing well with the screen protector. If installed correctly (no bubbles) you won't even notice the protector is there, honestly.
@@lordelcorion I suppose it's worth a try, then. Thank you.
When could we buy it? I need one too
I bought here:www.chitusystems.com/product/chitu-6-0inch-mono-lcd-screen-1620x2560-for-anycubic-photon-mono/
@@lakshmikerr887 i bought from them it never sent they claimed it was sent and delivered but the shipping company said they never even got it, nor did i ever get a receipt or tracking number until i fought for it over email and then it all just said it had been signed for and delivered.. it was not
Anycubic are you going answer our questions for when these screens will be sold.
I just got in one for the Mono SE. I had to open a ticket on the Anycubic site and get the link to the exact screen. It took about a month to get here from China. The screen for the SE was $70. They are currently in the middle of a holiday so might take longer to get back to you as a result.
@@Jeremy_Lindquist can you send me the Shoplink Link to the Mono SE replacement Screen?
How much different for the MonoX? And when can we start getting spare parts such as new screens and extra vats?
Very easy to do. Thank you Anycubic
First off, how many times did it take you to get the pins of the cable aligned cause I refuse to believe it was done first time. lol
I'm still struggling lol. Any tips?
i cant find this screen to buy. does the mono SE screen work on the mono ?
You can find here:www.chitusystems.com/product/chitu-6-0inch-mono-lcd-screen-1620x2560-for-anycubic-photon-mono/
Very easy!!!! Thank You!!!
are replacement screens still available anywhere?
Everywhere seems to be out of stock.
Hello I've a mono x6k and I cut a little hole on polarised film.. Is there any video to how to change it? Or is there any service in Türkiye..Thanks..
There is not they are assholes
Am I the only one who noticed that 3 swipe of the glass left it all fogged up by the time they finished. Please clean it thoroughly with glass/screen cleaner. May not heavily impact print quality but its not that hard to do it the right way lol
Where can we get replacement screens?? I think I might need one in the the next couple of weeks and there is no replacement units anywhere.
Maybe it is, I think, but check it
@@akosgraczasoti7250 thanks i'll check it!
Anycubic started selling them for both the Mono and Mono SE through their official AliExpress store (1 is 6" and the SE is 6.08").
a.aliexpress.com/_BS70St
Hol lehetne kapni ilyen alkatrészt??
I can’t find any help anywhere, I’m trying to get a replacement since your stock FEP had a hole in it and on one of my first prints, the resin cured on the LCD and ripped out the polarization layer on the Lcd
Sorry to hear it. Anycubic sucks ass on the replacement parts. Go to "Chitusystems" website, and be ready for long delivery times.
@@atsilleps I ended up contacting Amazon and they sent me an entirely new printer
Upgrade Lcd photon mono 2K to mono 4K replace motherboard or same? Please link motherboard mono 4K 🙏
Where can I find the screen? I can’t find it anywhere
Ohhhhh I got the SX04 when I needed the SX03...... fug
Where can we buy it?
Looks like i will have to be returning my printer simce replacement parts are nearly impossible to find.
I got a new lcd screen and it still doesnt work
I've done all the steps correctly, but after the installation, I Just turned on my AnyCubic Photon Mono 4K on and the Print Screen starts to Flicker.
What if my printer doesn't even have the LCD Screen Pad?
I cant find this anywhere to buy????
Why this printer don't have a glass screen protector? The polarizer film is easy to scratch
Man oh man I wish I had just slapped on a screen protector when I first got this.
Would be useful if we knew how to buy a replacement screen.
They obviously have screens since they are still selling printers. Terrible service.
I found one on eBay for $73.14. They could be easier to Google up, though, given eBay's spotty service and inconstant sellers.
So my screen pad and a crack in it, anyone know where I can get a replacement from?
I installed the new screen, and it prints, but the prints are very bad and low quality. Anyone else have this issue? How can I fix it?
have the same issue, installed a new screen a week ago and i cant figure out how to fix
Have you found out how to fix?
Hola cómo puedo comprar un LCD para reparar mi anycubic photon mono?
Buenas yo me he puesto en contacto con el servicio tecnico del sitio oficial y enseguida te atienden
Still no answers yo!!!
Ottimo sistema molto speed
"thanks, it was easy" yall are straight up liers, if you say it was easy at least include it took you more than an hour
Okay, second time doing this, only took 15 minutes, last time I guess I was just brain dead
Terrible company not having a critical spare part.
Them not supplying a spare screen is like a car company not supplying a spare engine.
@@_Gondor44_lol no car company only warranties brand new cars for 3 months
Is easy to buy a new printer 250$