Toyota Prius suspension noise full video
HTML-код
- Опубликовано: 12 сен 2024
- Hello If you enjoy the content, consider subscribing, liking, and sharing the RUclips channel to help support it. Engaging with the content and spreading the word can make a significant difference for content creators. Thank you for being a part of our community.
PayPal www.paypal.com...
Toyota Prius suspension noise full video
Bush Stabilizer 48815-64011 48815-64021
Song name
Good Girl by Maya Johanna (Bells in Our Stomachs)
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
Very common for this issue to occur in Priuses but it seems this customer replaced wishbones, anti roll bar links etc as most people and garages do this. Simply replace the D shape rubber mounts or put in a spacer which tightens the mounts and never wears out, we do this on a daily basis to all of our taxi driven Priuses.
Where can you get this spacer
Allo
Allo
Do you have the link that can buy a spacer attached to mount?
Very professional with the rattle gun! A lot of mechanics can learn a thing or two from you regarding care and professionalism
after watching your video replaced those 2 anti rollbar d-bushes now no more noise
Thanks for your helpful video
What’s the name of the part and where can I purchase thanks
I had the exact same noise in my 2010 Prius but it turned out it was actually struts making the noise but since I already changed struts and sway bar links, I thought I should better replace bushings too as they are very inexpensive parts. I used Monro brand for struts and Moog for links and bushings as they appear to be one of the best on the market. I followed exactly the same they did and it worked out great. it took me around 5 hours to get the whole job done. Although bolts of the cover metal right below the bushings were tough to open due to rusty surface, it was still not difficult to get the job done. Down below I saw one comment asking whether you gotta remove sway bar link to do this job. Well, not entirely. As shown in the video, you just need to loosen the lower bolts of sway bar links in both sides to make some wiggle room for sway bar cause if you can't move the bar little bit up and down then it'd be very tough removing the bushings and installing new ones. Finally, THANKS A LOT for this useful video as it is the only one showing how to DIY the Prius bushings on RUclips.
Great to see a mechanic to hand thread in a bolt!
Very impressive. I have been searching for a video like this one for some time. I was about to replace the sway bar end links ($84/each from Toyota) when I found this video. Thank you so much and thank you for wearing gloves. Wish my Honda Accord used the same design. Those cars you have to drop the sub-frame to get at the bolts.
your welcome thank you for your great comments
hey thanks for this, i couldnt find the source of the noise in my prii, hare krishna!
I will be tackling this job today! 🤟 thanks for the knowledge
Well? How did it go?
Good instructions but the music must go.
Good video. Would have been alot better if instead of that weird background music you just taught what you were doing step by step
hey man that bass player was pretty funky in the first song. i prefer this approach over some dummy who has a 4 minute intro before even looking at the car
This was a good video really. But for someone like me who wants to try this out, it would be cool if you listed the names of each and every tool in the description section since I don’t know what tools are you using. Thanks again guys.
Hi there it’s better if you get a tool set something like this and try it. Hope it helps I have put some tools size on description www.amazon.co.uk/dp/B01N9YQQEG/ref=cm_sw_r_cp_awdb_imm_T8P1WP3GF5XR2KTPS3R4?_encoding=UTF8&psc=1
I believe you do not need to remove stabilizer links to do this job, but thanks to show us the symptoms.
That music wasn't the best choice, would rather hear commentary.
Lol most out of place music
My one still ok after 202000 miles, I have a set of these ready for installation but the original does not give up.
What a great video
very informative but the music doesn't match the video.
This video is very well done! Love it
And/or steering sound when braking slow speeds just found out on my prius....struts.
It would be better if you remove the music & speak louder/clearer.
That music wasn't the best choice, would rather hear commentary.
Are you replacing the front or rear sway bar bushings? Thanks 🙏
great video thanks
i get a weird squeak noise in my 2014 prius. it's not a squeal. just a quick squeak that happens randomly with no pattern. almost like something is engaging on/off. it seems to happen more often after i've driven and then stop at a light or in a drive thru line.
The rear brake calipers like to stop sliding and they can make noise.
So helpful...thanks so much...God bless
This is great, thank you.
Hi may Toyota Prius indicator bazer not work
Perfect video
Yo front ki rear tire ho sir? Same noise on left side on my prius.
its front wheels
Good 👍🏽
bs commerical I already watched the commercial got a phone call now the same commercial pops up fricken unskippable commercials, RUclips gets worse and worse everyday.
Wait a minute I have a question did you have to cut the new Rubber bushing ?
No, it’s manufactured and designed so that we can insert in the bar.
Can you tall me from where i can buy a good spar part to my 2011 prius
Your best place would be Toyota, depending upon parts you can try aftermarket supplier selling brand name denso parts
Would this cause the front two tires to wear unevenly
May be! wheel not alignment and tyre pressure would cause tyres uneven wears
Is this a Prius V and not the smaller Prius?
hi its not Prius v, anyway they should have similar set up.
Do I have to replace the sway bar links
Hi only if there are worn
Cant you replace them without removing the sway bar?
Why did u do it?
Suspension noise
@@MustangMotors what about rear engine mount?
@@jamest163 have you got problems with it!
@@MustangMotors thanks for the reply. I have a prius gen 3 also. not sure if my mount broke or not. from general tell its sway bar bushings on your video. just wondering what about rear mount bushings is bad also? i have similar sound and noisy.
@@jamest163 usually you get knocking noise, best way is to lift the vehicle safely and check the suspension.
Are you nepali guys?
Namaskar yes we are
3:51 the all intact !!, but are you to cut in half .,this is damage
Rubber can eat away metal from sway bar.
Hi, how many miles does the prius have, for reference to change rubbers, thanks

how many miles does the prius have, for reference to change rubbers, thanks
This one is a taxi over 100.000 miles