Suzuki DF 140 overheat issue (The sensor fix!)
HTML-код
- Опубликовано: 4 окт 2024
- Suzuki DF 140 overheating issues solved! After hours and hours of troubleshooting we finally found the culprit. Hope this helps one of you fix your problem!!
#youtube #youtuber #youtubeislife #subscriber #youtubeguru #youtubecontent #newvideo #subscribers #youtubevideo #youtub #youtuber and #youtubevideos #vlog
Great stuff thankyou for showing a decent no nonsense video that was straight to the point and I believe will help many people who have an older outboard with these issues,,BIG THUMBS UP👍
I don't even have this problem yet but I appreciate you sharing so people like myself can have a heads up. That saves us a ton of time and money. You guys rock!
Just got done fixing this exact issue and this video was super helpful, thank you!
Replaced my sensor yesterday - 2003 DF 115 apprx 650 hours - so far so good! Thanks again for sharing...
This is the same issue I had with my DF140 will try this fix tomorrow. Thanks Jim Daniels
I have a brand new motor with less than 200 hrs and it’s overheating. Thanks for sharing I’ll take a look to that sensor.
Thank you for shaing this video! Glad you fixed it!
You're welcome!
Great info, very helpful, thank you! 👊
Got a 2020 df140 with 56 hours that has the same issue. Fixing to check this out soon
Great Information!!
Thanks so much for diagnosing this!! (You guys are LIFESAVERS!!)
I love these engines, i have two Johnson 140 but they are Suzuki engines with Johnson cowling. With a book they are easy to diagnose
Thank you for sharing. Check the easy parts first then harder one's always.
For those wondering, this is the exhaust manifold temp sensor.
your totally right i change the same sensor and fix thanks so dam much
Do you know the name of the sensor my df40 is doing the same thing
Thanks for sharing - I think you nailed my problem - will install new sensor in a few days and give an update!
Bob Watson did it work? Å
Hope this will work on my 70 DF :)
Thanks for sharing, I haven't changed the sensor yet on my df140, but I will let you guys know soon if the issue goes away :)
I believe that these art NTC sensors (Negative Temperature Coefficient) What resistance values do you check them for and at what temperature?
Giddy-up!
Thanks fellas.
Trevor..YOU DA MAN
..keep posting.
I have df 60 overheating light when idling for a short time .Just started doing this only at idle.I bet the same sensor is bad on mine. Water is pumping fine and is coming out warm. Thanks ! I will change my sensor first.
Hi from The Netherlands,
Lucky that your sensor reported an overheating problem! Me and my two of my friends (all three boats mounted with a DF140) suffered the same issue (in a 2 years period): all three engins had a crack in the cylinder head, likely caused by overheating. All three of us got no sign of overheating at all, no alarm set off. It was noticed due to the engin starting up running on three cylinders. Scary: the enigine numbers of 2 of the engins differ only 1 digit! Suzuki Europe denies any responsibility.
Anyone out there with the same problem?
Hi, what is the engine year?
@@mariagraziafornasin8111 2008
Thanks for sharing..
Thank you
thermostat will stay open when it stops working because it is a fail safe thermostat .. you can tell it is open by feeling the prop hub discharge it be warm and never gets cold and hot to indicating opening and closing . . most mechanics dont even know about a oil cooler behind the oil filter because it is not in the service book. I replaced my engine because I was getting oil in water with 600hrs on it . I wonder if it was oil cooler. the sensor can be cleaned as I have and tested per service book .
great video i have a similar problem now got a question for you that's driving me crazy because my motor is overheating on the exhaust port on the top next to the telltale I'm having exhaust come out of there with squirting water as well that's not normal because I have two motors and the other one doesn't do that
Sounds like all those things needed to be done anyways
does this sensor just screw out? would love to have seen it out?
How did you change the oil cooler? I just saw on mine that the o ring is damaged and I need to replace it. Could you talk about taking the oil cooler off?
Duly noted
Good to know cheers.
Im new to the boat stuff. How do u know when the motor is overheating?
Hi, I have a problem on my Suzuki 140. Only the buzzer activates without the flashing light.... what does it mean? A thousand thanks
Shouldnt you get a check engine light if this sensor goes bad?
Hi what's the name of the sensor i have the same problem
I am having a similar issue with my df60. Check engine light is also blinking….I’ve tried it all
Hope this will work on my 70DF :)
After going through all that frustration do you still rate the suzuki engine over the yamaha ,i thinking to purchase a suzuki 150 soon but am indecisive
This is early version suzuki but chain on fly wheel and sometimes the warranty goes to 6years as an incentive or rebates sells this engine . .I liked my 2002 much better than my 2013 suzuki as it had some small issues .
Hello.
How did you check the block if it full of salt?
nice to know
Good day I have my Suzuki 115 outboard one engine is cranking but don't want to start the plugs don't spark I bought new spark plug but still the same story. Advice pls
thanks
Hello, I have Suzuki DF40 and 15 seconds after starting (and he is cold) it show me the heating indication one signal every 5 seconds. Did You have similar problem? Tanks
How to know how many hour the engine running if they use analoq tachometer
turn the ignition on and rpm will move if it goes to 3 it means 300 hrs and if it goes to 3 twice means 3000 .. no need to have the engine running
I have a evinrude etc 225 at low idle it does great but when I get to full speed the engine overheat light comes on and puts me on safe mode already changed the impeller and have great flow coming from the "pee hole" lol......could it be my sensors to? even if I pulled them out and they look good.....is there a way to test them ?
impeller problems
Overheat no problem only change impeller or thermostat or water pump after good
I need help please I have a problem with the engine 115 df Suzuki overheating and ringing and stop
Ill get a suzuki next but ill stay far away from the 140cc engine
man you don't have any videos or anything on how to remove the flywheel??
Is there a name for that particular sensor?
What sensor is that?
thanks for the info
How many hours on the motor ?? My df140 has almost 400
Should have put temp gun on tell tail
Hi I am getting my fuel in my oil . Level rising. And thermostat stuck open. Any one has these issues ?
Wats the name of the se sir and parts number pls
I could not get max rpm on Sizuki df 140 some one know the reason?
My suzuki 140 is leaking oil like the exxon valdez
Lol same thing happened to a friend of mine with his car ac replaced everything and it turned out to be a sensor.
If you keep it turned off it won't run hot.🤔
Can anyone tell me which sensor this is exactly??
@@MS-rn3bz yes, it is on the port side of the motor, tucked behind some wire loom. Most of them have a blue wire attaching them.
I believe it’s part number: 34830-87J20
i got a 2015 and ive battled a random over heat the whole time at 5,000 rpm i got just over 200 hours now and if i keep it 4900 or only run it for a short 3-10 sec it normally wont shut down and go it safe mode. but when it does i normal just turn it off for like 5 secs and it runs like new. Dealers have always BS the problem.
Its the same in cars these days. Its almost always a sensor. I dont trust them.
Get a thermal gun. They're ten bucks.