How to Replace Front Lower Ball Joints 2013-2019 Ford Escape

Поделиться
HTML-код
  • Опубликовано: 1 окт 2024
  • Buy Now!
    New Ball Joint from 1AAuto.com 1aau.to/ib/1ASB...
    This video shows you how to install new, quality TRQ ball joints on your 2013-2019 Ford Escape. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
    This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2013 Ford Escape
    2014 Ford Escape
    2015 Ford Escape
    2016 Ford Escape
    2017 Ford Escape
    2018 Ford Escape
    2019 Ford Escape
    Tools you will need:
    • Pry Bar 1aau.to/oaeQ/1A...
    • 15mm Wrench 1aau.to/oamk/1A...
    • 15mm Socket 1aau.to/ocpk/1A...
    • 18mm Socket
    • 19mm Socket
    • 32mm Socket 1aau.to/oeQ/1AA...
    • 8mm Socket 1aau.to/obVz/1A...
    • Brake Caliper Hanger 1aau.to/ooo/1AX...
    • Cutoff Wheel
    • Tie Rod Puller
    • Air Chisel
    • Ratchet 1aau.to/oco4/1A...
    • Socket Extensions 1aau.to/ocpk/1A...
    • Torque Wrench 1aau.to/obqF/1A...
    • Bungee Cord
    • Gloves 1aau.to/obxH/1A...
    • Marker / Writing Utensil
    • Safety Glasses
    • Cardboard
    • Floor Jack 1aau.to/oaJH/1A...
    • Hammer
    • Jack Stands 1aau.to/oav8/1A...
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 1

  • @TRQ
    @TRQ  Месяц назад

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money