@@Buzzlybee Not true. Audio doesn't have orientation lol. As long as you are hitting the front side of the mic. Having the mic diagonal, horizontal, vertical, upside down, etc. Makes no difference. You just need to be speaking into the front of the mic (side with the blue logo, volume, mute button).
@@LoganHillenburg The manual does say this. Separately, I have the silver Blue Yeti with USB connector (I believe is the regular big one) and I have it on its original stand. I notice that the bottom of the mic is either sealed or has some thick black rubber. How do we remove that rubber before connecting the mic to any boom arm? (Excuse the ignorance, new at this stuff).
@@MrGheller Make sure to have everything unplugged before doing this* You have to unscrew both sides by rotating both knobs. Once you do, the mic itself will come out
8:37 "you need to put your mic horizontal to record right with a cardioid polar pattern" lol no you just need to make sure the front of the mic (probably where the logo is) is facing towards you doesn't matter is you're using it right side up, upside down, sideways, at 45° or anything else. That all doesn't make a difference
Exactly... There's not even any way to position the Blue Yeti sideways like that with the default mic stand that it comes with... If it was intended to be used sideways, it would have been very important for them to allow you to use it sideways with the default Blue Yeti base...
Microphones don't have to be sideways. It all depends on the polar pattern for your specific mic. Your mic could be upright, sideways, up-side down, it doesn't matter, as long as you're speaking into the proper face of the microphone. Here is a video for reference from 2 guys who absolutely know they're stuff on audio and Microphones: ruclips.net/video/zad44bK9cMg/видео.html. They cover that exact topic at 13:30.
I noticed you didn't mention how the pole going into the base is just... sitting in there. Nothing is holding it in there, so for those with desks slightly leaning forward or backwards, this thing will slowly rotate on you. Also, you might accidentally lift up on it and the whole thing will fall over to your surprise because it's clamped to the desk, so you wouldn't expect it to fall over
Yeshua(Jesus) the Christ loves you! Praise YHWH El Shaddai and may He bless you! Christ is the King of kings and Lord of lords! (YHWH - the LORD) (El Shaddai - God Almighty) To those who haven’t; Repent of your sins and believe on the Adon Jesus the Christ, believe in your heart that He has died for your sins and rose from the tomb on the third day and you shall receive the Holy Spirit of God and He shall dwell within you. You shall be saved. Be baptized in the name of the Father, the Son, and the Holy Spirit! - Jesus the Christ loves you, praise YHWH our Elohim - Evidence for Jesus Christ’s existence, crucifixion, and disappearance from the tomb (He rose from it): The Lord Jesus Christ did exist, gathered disciples, and was crucified and went missing from the tomb. To argue about wether He was taken from the grave or rose from it, is an argument a skeptic can make. Because well if you disregard the eye witness testimony of the disciples and there willingness to die for Christ, and humans won’t die for something they know is a lie, when Peter is pinned upside down to that cross, he could have said that it was a fake, but He didn’t because it wasn’t, what care would he have about death in this world if he knew for a fact he had assurance of a life in another, Jesus Christ did rise from the tomb and is the King of Kings and Lord of Lords. Now the evidence for the Lord Jesus Christ’s existence really isn’t hard to find a multitude of non-Christian scholars and historians mention Him within 150 years after the time of His life. One such is Tacitus a Roman historian who reported on emperor nero’s decision to blame the Christians for the fire that had destroyed rome in 64 AD. Tacitus wrote: “Nero fastened the guilt ... on a class hated for their abominations, called Christians by the populace. Christus, from whom the name had its origin, suffered the extreme penalty during the reign of Tiberius at the hands of ... Pontius Pilatus, and a most mischievous superstition, thus checked for the moment, again broke out not only in Judaea, the first source of the evil, but even in Rome…” In this Tacitus makes reference to not only Christians, but Christ calling Him Christus and confirming the Gospels going on to say that He suffered the extreme penalty (crucifixion) under the reign of Tiberius and by the sentence of Pontius Pilate, which like I said confirms the Gospels narrative. Another important source of evidence about Jesus and early Christianity can be found in the letters of Pliny the Younger to Emperor Trajan. Pliny was the Roman governor of Bithynia in Asia Minor. In one of his letters, dated around A.D. 112, he asks Trajan's advice about the appropriate way to conduct legal proceedings against those accused of being Christians. Pliny says that he needed to consult the emperor about this issue because a great multitude of every age, class, and sex stood accused of Christianity. At one point in his letter, Pliny relates some of the information he has learned about these Christians: “They were in the habit of meeting on a certain fixed day before it was light, when they sang in alternate verses a hymn to Christ, as to a god, and bound themselves by a solemn oath, not to any wicked deeds, but never to commit any fraud, theft or adultery, never to falsify their word, nor deny a trust when they should be called upon to deliver it up; after which it was their custom to separate, and then reassemble to partake of food - but food of an ordinary and innocent kind.” This passage provides a number of interesting insights into the beliefs and practices of early Christians. First, we see that Christians regularly met on a certain fixed day for worship. Second, their worship was directed to Christ, demonstrating that they firmly believed in His divinity. Furthermore, one scholar interprets Pliny's statement that hymns were sung to Christ, "as to a god", as a reference to the rather distinctive fact that, "unlike other gods who were worshipped, Christ was a person who had lived on earth." If this interpretation is correct, Pliny understood that Christians were worshipping an actual historical person as God! Of course, this agrees perfectly with the New Testament doctrine that Jesus was both God and man. You may have heard of the scholar Flavius Josephus who mentioned James as being the brother of the Lord Jesus Christ, which matches what Paul said calling James “The Lord’s brother” and there is another document that Josephus may have written which goes: “About this time there lived Jesus, a wise man, if indeed one ought to call him a man. For he ... wrought surprising feats.... He was the Christ. When Pilate ...condemned him to be crucified, those who had . . . come to love him did not give up their affection for him. On the third day he appeared ... restored to life.... And the tribe of Christians ... has ... not disappeared.” Now it’s up to debate wether this is the entirely original document of what Josephus wrote, or if a Christian had edited it. But regardless he wrote about the Lord Jesus Christ. Wether it was negative or positive like the possible document is. Anyways there are many other statements, documents, letters, and writings of all sorts from the ancient world talking about the Lord Jesus Christ and there is not one question if He was a real person or if He was crucified and went missing from the grave. That is clear as day, He is a real person, was crucified, and went missing from the grave. And He did rise from the grave. And for more evidence of the Lord Jesus Christ, there’s the Bible and you see there is no evidence the Bible is corrupted, a lie, created by the Roman government, folktale. It is the recount of the Disciples of the Lord Jesus Christ, now wether you want to believe it is up to you. And what profit was there in spreading Christianity, All the early Christian suffered persecution, beatings, and were killed. Another Scholar reported that James the Lord’s Brother was thrown off a building and then stoned to death for spreading the Gospel in Jerusalem. These people went to great lengths even giving their own lives for the Adon Jesus the Christ. Amen
EXACTLY what I've been looking for for my Yeti. THANK YOU! And thank you TONOR! I'd swear we had precisely the same flimsy OLD arm.. Slowly inches it's way toward the surface edge. If not careful, both the flimsy old arm and your Yeti crash to the ground.. Hours and hrs on amazon last 3 days searching for just this sorta setup. One I can entrust to cradle my yeti. You shouldn't have to be preoccupied with slippage. You should be preoccupied with your work. Love all the extras like the reinforcement straps and the awesome hook for your cans. WTG TONOR!! These guys know what's going on and they put much thought into their excellent product. Ordering now. Can't wait. Thanks!!!
I thought you have 300k+ subs from how professionally made your videos are and you’re only at 23k?? You definitely deserve more and I learned so much. Buying this rn. Just subbed x
this video is literally the reason i will be purchasing this arm. also shoutout to you for literally putting your entire setup detail in the description. SUBBED
Btw if you want to get this mic, the link’s one is sold out but there are other ones on amazon if you search the name. They’re the exact same product. Just in case you didn’t know 😁👍
Cardiod just means that its picking up sound from the front of the diaphragm plus a little from the sides. It's just more convenient to put it diagonal. Studios put their mics downwards so that the whole mic is warmed up properly and evenly.
This is very true! I think it's a misrepresentation from a lot of reviewers of this mic and I've since corrected my orientation that I use it in. I'll have a video about it soon.
Exactly. Cardioid pattern has nothing to do with boom orientation and everything to do with front capsule (0 degree) sensitivity. Great job w/your review -- awesome!
Not only only do the size and surface area of the clamp to the desk make a difference, but also the fact that the boom connects over the desk (the circular hole) rather than on the overhang on the flimsier model, which would tend to put more stress on the clamp. So the Tonor one would have a different center of gravity.
I looked for reviews for a reliable arm for my set up, and this review sold me on it, just ordered the full kit with a microphone since just the arm set up was sold out. Thanks for doing a very informative review, appreciate it!
@@flickcore Yeah, it went well. I will be doing my own review of it down the road after a few more weeks of using it. It was spot on, what I needed for my space. Love the build quality and the mic is top notch for my needs.
I super appreciate you showing your microphone positioning in this video, your configuration will help a ton to not pick up my loud mechanical keyboard when I start YT and Twitch. Much appreciated my man!
I was actually informed that this positioning is incorrect and BAD for the mic. I recommend just using it upright or hanging and speaking directly into the front of the capsule.
Underrated? ?... Dude has 14.3K subs. It may not be as much as really BIG RUclipsrs like Pewdiepie or whatever, but "underrated" would be a total overstatement... It's VERY hard to get that sort of attention on RUclips these days. I hope he feels very lucky, because he should be lol
@@NiteSek4804 do you not realize that literally everything about his vids are such high quality and his reviews are really good also, he needs more recognition.
@@saints7180 My comment LITERALLY went right over your head didn't it? ? Your reply doesn't correlate at all to what I even said. So, what the french toast are you talking about my man? ? Lol..... I said he is not "underrated". The subs he has rn is actually very high, according to standards. Do YOUUUU realize what the term underrated even means? ? It means to " underestimate the extent, value, or importance of (someone or something)"..... Now please tell me, who told you that 15k, I repeat, 15... THOUSAND subs is underrated? ? Lol... I would have agreed if he had like 800 Subs or whatever, but over 15,000 is a lot. He's past that poverty point already Lol... Do you know how stupid hard it is to even get noticed? ? Especially here on YT with it's shitty algorithm & how people just mainly support people who are already big? ? That's why I was all like, I hope this dude tells himself in the mirror every morning that he is very lucky, & he should be grateful lol,... because there are PLENTY of people with quality content out there that don't get noticed or get shat on for no reason. So, as far as I'm concerned, he's OUT of the storm, so I don't feel sorry for him lol... He made it. Mission accomplished. I agree, he's great & all, but......... not underrated 😂
I believe he said he had the InnoGear. I have the same one. It works but it is a cheap one. I got it when I was just starting out to see how I would like using a boom arm. If/when it one breaks I'll definitely be upgrading to a better one. If you're looking for one right now I'd definitely spend the extra $10.00 or so and get the one in this video.
I prolly have his old boom arm.. And I also like it it cost 4$ for the boom arm and 2 1/2$ for the pop filter... Though my review is taglish (Tagalog + English) so ya'll might not understand :/
Awesome review! I was looking for something of quality, and couldn't exactly find anything for this mic on top 10 lists and you not only showed us a nice product that serves multiple purposes for gamers (I'm buying this, the shock mount you mentioned and the World of Warcraft edition Blue Yeti X for my gamer brother) but you gave us a quality shock mount to use that isn't crap like every one I saw until I watched this video. You even gave a 15% coupon (assuming it still works lol) in the video description, which is just awesome. Thank you so much for making anyone looking for Blue Yeti accessories lives so much easier lol.
I have been looking for a good boom arm for the Blue Yeti and this one looks perfect for what I need in my new set up and is affordable. Thank you so much! 😊
I’m glad I found this was about to buy one and then I realized you had a discount code! Will definitely be purchasing this tomorrow and to give you credit as well with the code thank you sir 💪🏼
I’ve had this mic arm for a couple of months and it broke on me a week ago and for people who is looking to buy this you have to be very gentle or else it can crack. It is a very good arm for budget it’s just really fragile
Awesome channel, great pacing and quality. I thoroughly enjoyed the review and I'm happy to report that you convinced me to give this a try since I purchased the Rode PSA1 but was very disappointed that it wouldn't stay in place with my Hyper X Quadcast S even though I saw other reviews with that combination. Earned a sub!
I'm surprised you have only 12.9 thousand. The only reason I say "only" is because I thought this channel would have way more due to the quality of the video.
It really don't matter what way it faces, That just means you have to talk into it from the front, And it blocks out left right and from the behind! It don't matter what way the mic sits! The reason people tell you to do that is because its better to speak across the mic for spitting purposes but when its on a boom and you are sitting away from the mic, It don't matter either way! If you were holding a CB radio mic that's when this would matter! And you should never wrap wire around any kinda metal like that! You are pretty much making a coil
Just make sure you talk into the front of the capsule, if it’s got a cardioid pattern. If it’s omnidirectional it doesn’t matter. Makes no difference if the mic is upside down, on the side, whatever. Good vid tho.
Seriously high quality content! Might have to buy this bad boy just because of your review! If you’ve got a code to input when purchasing I’d love to have it. Anything to support a channel with high quality vids like this!
Damnit I had exactly 30 dollars I saved up on my stream over the tome of 5 months and I was thinking it would be a great investment to get the boom arm but now it 40 😪
honestly, the headphone hanger should go on the opposite side of where it currently is, making it easier to access rather than hanging under the desk. just my opinion, take it or leave it
I actually really agree with this! It can be a little annoying to access it where it is nit I was just so stoked they had it since it was exactly what I wanted, haha
I can say that when I get a new Mic, you've sold me on that Adjustable Boom Mic Stand. I use to use a Logitech G430 Headset til the left Muff where the Mic is located broke by coming apart where the Screw was holding it in place. It is time for me to upgrade to better Equipment starting with my Vocal Equipment.
@@RAVisuals Oh I am considering going with the Blue Yeti X, I am going to wait until my Birthday to get the Mic at least. I don't spend all willy nilly or go all spend it while you have it, I spend like a Boss and save like a Boss too.
Been considering something like this for a long time now, but you sold me on it. Ordered, as well as applied your code. This video was genuinely helpful, thank you.
I got both of these products, and I loved the arm, but the shock mount won't stay up because it falls and unscrews. I have it in the exact same orientation you did in the video, is there anything I'm missing?
Nevermind! I got your gear link! You also sold me the lights! lol. Bro your content is pretty cool! I don't know why youtube doesn't suggest your channel! I think that your channel is so underrated.
Nodi hey! Yes, i got it! You won't regret, you can save money buying this one instead another, this one feels sturdy and strong. The best advice i can give you is about the shock mount, if you own Blue Yeti Nano the wires will fit thigh in most of shock mounts i bought Auphonix which fits "fine".
I bought the bundle that has this boom arm (T20) and the condenser microphone (TC20). I have to say I am impressed. I only use my mic for voiceovers and podcasts and it is tied to my M-Audio M-Track Solo audio interface. $60 for the bundle and right now you get an extra 10% off. It's an amazing deal if you're just starting off.
I will give these a try, but it will take a while for the Shock Mount to be Delivered. For some reason, there are Blue Yeti Boom Kits that come with Shock Mounts that don't fit the Yeti.
Went ahead and purchased the T20 Boom Arm and the 15% promo code still works! Will probably be posting an unboxing video of it myself and trying it out since I've started doing commentary a lot more with my Razer Seiren X! Liked and Subscribed!
Telling people that vertical vs horizontal orientation of the mic affects the sound quality in any way, let alone a specific pattern like cardioid, shows a lack of knowledge in audio engineering. Vertical or horizontal orientation does NOT affect the sound -- the only thing that matters is that when in cardioid you are talking into the correct side of the mic.
I was misinformed back when I made this video. I think I even pinned a comment a long time ago explaining what I meant by the statement. I know it doesn't affect what it sounds like. Its all about getting it out of your way if you need to
Just a heads up, if you own a Blue Yeti X, the shock absorber in this video is not compatible with it. Had to find out the hard way. Also there's no way to keep the clip from rotating so my mic just constantly swivels back and forth towards my monitor which is scary. Gonna be returning both items but never less a good video.
PulS MatriX hey man! Sorry that happened. I have addressed that in the comments a few times and told people the shock mount is made for just the yeti. I didn’t mean to mislead anyone!
@@RAVisuals haha no worries at all, still enjoy watching the videos, that part was on me. Should have digged deeper. If you have any suggestions for what you recommend or have a video, that'd be swell
I appreciate this video. Seems I found it at just the time I needed it as I was considering what to do about my microphone as I need it closer to me, but couldn't think of what to do, and then remembered boom arms. Appreciate the tip on it should be vertical too! Didn't know that!
jgillette98 don’t worry about the tip on it being vertical. I was mistaken about that! You can do it, but you don’t HAVE to. Just make sure you’re speaking into the front of the mic (where the logo is)
Why wouldn’t you be able to position the mic up or down? I understand that the mic is side addressable but, the original stand that comes with the mic holds it in a vertical position.
Hey, man! That tip about turning the mic sideways with the cardioid pattern isn't true. Whether it's in its normal orientation, inverted, or on its side, the only thing you need to ensure is that you're speaking into the correct side of the microphone and that it's positioned properly so it picks up your voice clearly. (the side with the logo). The only way it would make a difference is where the mic is positioned. If the main portion is pointed more towards your nose, you're going to get a less bassy sound. Same thing if it's pointed towards your chin, you run the risk of it sounding too muddy. Also distance from the microphone matters and adjust gain accordingly!
Didn't have high expectations from the video, but you've delivered. the side by side comparison, showing how much more sturdy it is just made it for me. My search for my next boom arm is over. Thanks mate!
Liked it all except what you said about the mic being horizontal. it can have it vertical, horizontal or upside down does not matter as long as you are speaking into the front, you do NOT want to have it pointing tip towards you.
I mentioned this in a comment after i made this video! Disregard that statement! I read something from another RUclipsr and they obviously were very wrong about it so that was my bad for saying it!
About the headphone hook... My desk has a solid side so their clamp would not work unless I cut a hole into the side of my desk (not going to happen). IMHO, their clamp should have a hook that sticks out from the desk - or one that is adjustable.
I’m so glad I found this video! I love my yeti but I wanted to make videos without the mic being shown is it possible with the arm… and if you don’t mind me asking, what mic set up were you using to do this video… it sounds great
Thanks for sharing. I'm pretty I currently have the same boom arm as your old one and I was honestly disappointed with it but just decided to keep trucking with it but now I'm ready for a new one.
Thanks for sharing. Why do you say that the Blue Yeti microphone needs to be horizontal (parallel to the floor) on cardiod mode? I have the silver Blue Yeti with USB connector (also the regular big one) and it comes with a base that positions the mic upright. The manual clearly states that cardiod should be used in that upright position.
I was misinformed when I made this video and pinned a comment saying that I was wrong about that. some streamers just orient the mic that way to get out of the way of their hands
@@RAVisuals Thank you for the clarification. Sorry I missed the pinned comment about that. I find these videos of yours super useful. I'm glad I found them. May I ask if you still use the Tonor T20 or which one now and why? I think you mentioned that the Tonor T20 is good enough for the big or regular silver Blue Yeti, but, the Amazon link says T20 is only good for the Nano Blue Yeti. Could you please help me understand this discrepancy? Thank you again for sharing these useful videos man.
Hmm.. I feel like that mic orientation comment needs to be revised or clarified. The mic's orientation is not going to make a difference as long as you're not talking into the top end of it, which yes plenty of content creators have done poorly. You just have to make sure you talk into the side with Blue logo, preferably about 6-8 inches away and you're good. The only thing to note is that because the two capsules in front are vertically offset instead of horizontally leveled, you might have slightly louder or quieter pickup depending on the height you speak into the mic and the angle of your head since you'd effectively be speaking straight into the front of one capsule or the side of the other. This is irrelevant for this video though because this will only make a difference in stereo mode given that stereo outputs in dual channel using the front capsule signals. Since cardioid mode is just passively mixing the signals from two capsules in the front, there's physically and electrically no way for it to make a difference. tl;dr - Yeti oriented upright is fine. It doesn't make any difference whatsoever because of the positioning of the mic capsules and the way yeti mixes its signals in cardioid. Keep hanging them yetis if that's your thing. Great video aside from that. Thumbs up :)
Puahaha thank you for the comment and all the info! I have since revised the way I orient my mic because it was something that I saw a ton of you tubers do and I THOUGHT at the time this is what blue suggested. In fact it was not the case and it was exactly what you said in your comment. I’m using mine upright now after Lear info all of this haha
If you ever have the budget In the future, if this breaks (if it doesn't break there is no need) get a used rode psa1 or of you have a bit more a blue compass. But this boom arm is really worth it.
he started with a beard and finished it clean shaved.. :)
Had to shave for work in between making the video, lol
AHAHAHHAHAH
8:48 you can have it vertically, horizontally or whatever angle you choose it doesn’t matter.
Not really. To get the best audio, positioning it like that is best recommended.
@@Buzzlybee Not true. Audio doesn't have orientation lol. As long as you are hitting the front side of the mic. Having the mic diagonal, horizontal, vertical, upside down, etc. Makes no difference. You just need to be speaking into the front of the mic (side with the blue logo, volume, mute button).
@@Buzzlybee As long you hit where the mic was intended to pick up audio it doesnt matter about the orientation.
@@LoganHillenburg The manual does say this.
Separately, I have the silver Blue Yeti with USB connector (I believe is the regular big one) and I have it on its original stand. I notice that the bottom of the mic is either sealed or has some thick black rubber. How do we remove that rubber before connecting the mic to any boom arm? (Excuse the ignorance, new at this stuff).
@@MrGheller Make sure to have everything unplugged before doing this* You have to unscrew both sides by rotating both knobs. Once you do, the mic itself will come out
8:37 "you need to put your mic horizontal to record right with a cardioid polar pattern" lol no you just need to make sure the front of the mic (probably where the logo is) is facing towards you doesn't matter is you're using it right side up, upside down, sideways, at 45° or anything else. That all doesn't make a difference
I addressed this in a pinned comment man! Well aware that it doesn’t matter. I was misinformed at the time
@@RAVisuals just keep it pinned then so people know
@@RAVisuals it actually works better for me the way you recommended it works wayyyyyy better
Exactly... There's not even any way to position the Blue Yeti sideways like that with the default mic stand that it comes with... If it was intended to be used sideways, it would have been very important for them to allow you to use it sideways with the default Blue Yeti base...
Microphones don't have to be sideways. It all depends on the polar pattern for your specific mic. Your mic could be upright, sideways, up-side down, it doesn't matter, as long as you're speaking into the proper face of the microphone. Here is a video for reference from 2 guys who absolutely know they're stuff on audio and Microphones: ruclips.net/video/zad44bK9cMg/видео.html. They cover that exact topic at 13:30.
I noticed you didn't mention how the pole going into the base is just... sitting in there. Nothing is holding it in there, so for those with desks slightly leaning forward or backwards, this thing will slowly rotate on you. Also, you might accidentally lift up on it and the whole thing will fall over to your surprise because it's clamped to the desk, so you wouldn't expect it to fall over
Yeshua(Jesus) the Christ loves you! Praise YHWH El Shaddai and may He bless you! Christ is the King of kings and Lord of lords!
(YHWH - the LORD) (El Shaddai - God Almighty)
To those who haven’t; Repent of your sins and believe on the Adon Jesus the Christ, believe in your heart that He has died for your sins and rose from the tomb on the third day and you shall receive the Holy Spirit of God and He shall dwell within you. You shall be saved. Be baptized in the name of the Father, the Son, and the Holy Spirit!
-
Jesus the Christ loves you, praise YHWH our Elohim
-
Evidence for Jesus Christ’s existence, crucifixion, and disappearance from the tomb (He rose from it):
The Lord Jesus Christ did exist, gathered disciples, and was crucified and went missing from the tomb. To argue about wether He was taken from the grave or rose from it, is an argument a skeptic can make. Because well if you disregard the eye witness testimony of the disciples and there willingness to die for Christ, and humans won’t die for something they know is a lie, when Peter is pinned upside down to that cross, he could have said that it was a fake, but He didn’t because it wasn’t, what care would he have about death in this world if he knew for a fact he had assurance of a life in another, Jesus Christ did rise from the tomb and is the King of Kings and Lord of Lords. Now the evidence for the Lord Jesus Christ’s existence really isn’t hard to find a multitude of non-Christian scholars and historians mention Him within 150 years after the time of His life. One such is Tacitus a Roman historian who reported on emperor nero’s decision to blame the Christians for the fire that had destroyed rome in 64 AD. Tacitus wrote:
“Nero fastened the guilt ... on a class hated for their abominations, called Christians by the populace. Christus, from whom the name had its origin, suffered the extreme penalty during the reign of Tiberius at the hands of ... Pontius Pilatus, and a most mischievous superstition, thus checked for the moment, again broke out not only in Judaea, the first source of the evil, but even in Rome…”
In this Tacitus makes reference to not only Christians, but Christ calling Him Christus and confirming the Gospels going on to say that He suffered the extreme penalty (crucifixion) under the reign of Tiberius and by the sentence of Pontius Pilate, which like I said confirms the Gospels narrative.
Another important source of evidence about Jesus and early Christianity can be found in the letters of Pliny the Younger to Emperor Trajan. Pliny was the Roman governor of Bithynia in Asia Minor. In one of his letters, dated around A.D. 112, he asks Trajan's advice about the appropriate way to conduct legal proceedings against those accused of being Christians. Pliny says that he needed to consult the emperor about this issue because a great multitude of every age, class, and sex stood accused of Christianity. At one point in his letter, Pliny relates some of the information he has learned about these Christians:
“They were in the habit of meeting on a certain fixed day before it was light, when they sang in alternate verses a hymn to Christ, as to a god, and bound themselves by a solemn oath, not to any wicked deeds, but never to commit any fraud, theft or adultery, never to falsify their word, nor deny a trust when they should be called upon to deliver it up; after which it was their custom to separate, and then reassemble to partake of food - but food of an ordinary and innocent kind.”
This passage provides a number of interesting insights into the beliefs and practices of early Christians. First, we see that Christians regularly met on a certain fixed day for worship. Second, their worship was directed to Christ, demonstrating that they firmly believed in His divinity. Furthermore, one scholar interprets Pliny's statement that hymns were sung to Christ, "as to a god", as a reference to the rather distinctive fact that, "unlike other gods who were worshipped, Christ was a person who had lived on earth." If this interpretation is correct, Pliny understood that Christians were worshipping an actual historical person as God! Of course, this agrees perfectly with the New Testament doctrine that Jesus was both God and man.
You may have heard of the scholar Flavius Josephus who mentioned James as being the brother of the Lord Jesus Christ, which matches what Paul said calling James “The Lord’s brother” and there is another document that Josephus may have written which goes:
“About this time there lived Jesus, a wise man, if indeed one ought to call him a man. For he ... wrought surprising feats.... He was the Christ. When Pilate ...condemned him to be crucified, those who had . . . come to love him did not give up their affection for him. On the third day he appeared ... restored to life.... And the tribe of Christians ... has ... not disappeared.”
Now it’s up to debate wether this is the entirely original document of what Josephus wrote, or if a Christian had edited it. But regardless he wrote about the Lord Jesus Christ. Wether it was negative or positive like the possible document is. Anyways there are many other statements, documents, letters, and writings of all sorts from the ancient world talking about the Lord Jesus Christ and there is not one question if He was a real person or if He was crucified and went missing from the grave. That is clear as day, He is a real person, was crucified, and went missing from the grave. And He did rise from the grave. And for more evidence of the Lord Jesus Christ, there’s the Bible and you see there is no evidence the Bible is corrupted, a lie, created by the Roman government, folktale. It is the recount of the Disciples of the Lord Jesus Christ, now wether you want to believe it is up to you. And what profit was there in spreading Christianity, All the early Christian suffered persecution, beatings, and were killed. Another Scholar reported that James the Lord’s Brother was thrown off a building and then stoned to death for spreading the Gospel in Jerusalem. These people went to great lengths even giving their own lives for the Adon Jesus the Christ.
Amen
EXACTLY what I've been looking for for my Yeti. THANK YOU! And thank you TONOR! I'd swear we had precisely the same flimsy OLD arm.. Slowly inches it's way toward the surface edge. If not careful, both the flimsy old arm and your Yeti crash to the ground.. Hours and hrs on amazon last 3 days searching for just this sorta setup. One I can entrust to cradle my yeti. You shouldn't have to be preoccupied with slippage. You should be preoccupied with your work. Love all the extras like the reinforcement straps and the awesome hook for your cans. WTG TONOR!! These guys know what's going on and they put much thought into their excellent product. Ordering now. Can't wait. Thanks!!!
Wow, never even thought of using the clamp to hang headphones up. Genius
Video starts at 2:40...
Ty
It would have been so much better if the video started at 4:20 yo, i tells ya
it started at 0:00 lmao
@@curtis6314 haha
@@curtis6314 it really didn’t tho
I thought you have 300k+ subs from how professionally made your videos are and you’re only at 23k?? You definitely deserve more and I learned so much. Buying this rn. Just subbed x
Maybe one day! Thanks so much for the kind words 🙏
true ! :)
Mine arrived yesterday! Makes me look professional. Glad you reviewed it and I got it! Thanks!
Glad I could help!
this video is literally the reason i will be purchasing this arm.
also shoutout to you for literally putting your entire setup detail in the description.
SUBBED
man this completely destroys the luling arts boom stand on amazon.... i feel ripped off. welp time to order this thanks!!!
SAME
Btw if you want to get this mic, the link’s one is sold out but there are other ones on amazon if you search the name. They’re the exact same product. Just in case you didn’t know 😁👍
link?
pengu ye the one in the description
Wow, I’m impressed by the amount your discount code saved! Just ordered the mic stand can’t wait to have an improved setup!
Hope you enjoy it! Just trying to help you guys out!
Cardiod just means that its picking up sound from the front of the diaphragm plus a little from the sides. It's just more convenient to put it diagonal. Studios put their mics downwards so that the whole mic is warmed up properly and evenly.
This is very true! I think it's a misrepresentation from a lot of reviewers of this mic and I've since corrected my orientation that I use it in. I'll have a video about it soon.
Exactly. Cardioid pattern has nothing to do with boom orientation and everything to do with front capsule (0 degree) sensitivity. Great job w/your review -- awesome!
Bought off your recommendation, but I put a rubber band into the mount and stem so it would make noise or pop out easily. Would buy it again!
Bro nice to see a current viewer here. I am deffinetly going to buy this, I thought it was funny how he shaved though. xD
Goddamn your camera, lights, and setup are all gorgeous.
trueeee man
Not only only do the size and surface area of the clamp to the desk make a difference, but also the fact that the boom connects over the desk (the circular hole) rather than on the overhang on the flimsier model, which would tend to put more stress on the clamp. So the Tonor one would have a different center of gravity.
I looked for reviews for a reliable arm for my set up, and this review sold me on it, just ordered the full kit with a microphone since just the arm set up was sold out. Thanks for doing a very informative review, appreciate it!
how did it go, you reccomend?
@@flickcore Yeah, it went well. I will be doing my own review of it down the road after a few more weeks of using it. It was spot on, what I needed for my space. Love the build quality and the mic is top notch for my needs.
I super appreciate you showing your microphone positioning in this video, your configuration will help a ton to not pick up my loud mechanical keyboard when I start YT and Twitch. Much appreciated my man!
I was actually informed that this positioning is incorrect and BAD for the mic. I recommend just using it upright or hanging and speaking directly into the front of the capsule.
@@RAVisuals oh, thanks for letting me know.
You’re underrated keep up the great vids man
Thank you! I sure will!
Underrated? ?... Dude has 14.3K subs. It may not be as much as really BIG RUclipsrs like Pewdiepie or whatever, but "underrated" would be a total overstatement... It's VERY hard to get that sort of attention on RUclips these days. I hope he feels very lucky, because he should be lol
True
@@NiteSek4804 do you not realize that literally everything about his vids are such high quality and his reviews are really good also, he needs more recognition.
@@saints7180 My comment LITERALLY went right over your head didn't it? ? Your reply doesn't correlate at all to what I even said. So, what the french toast are you talking about my man? ? Lol..... I said he is not "underrated". The subs he has rn is actually very high, according to standards. Do YOUUUU realize what the term underrated even means? ? It means to " underestimate the extent, value, or importance of (someone or something)"..... Now please tell me, who told you that 15k, I repeat, 15... THOUSAND subs is underrated? ? Lol... I would have agreed if he had like 800 Subs or whatever, but over 15,000 is a lot. He's past that poverty point already Lol... Do you know how stupid hard it is to even get noticed? ? Especially here on YT with it's shitty algorithm & how people just mainly support people who are already big? ? That's why I was all like, I hope this dude tells himself in the mirror every morning that he is very lucky, & he should be grateful lol,... because there are PLENTY of people with quality content out there that don't get noticed or get shat on for no reason. So, as far as I'm concerned, he's OUT of the storm, so I don't feel sorry for him lol... He made it. Mission accomplished. I agree, he's great & all, but......... not underrated 😂
What was the boom arm you had before?
I believe he said he had the InnoGear. I have the same one. It works but it is a cheap one. I got it when I was just starting out to see how I would like using a boom arm. If/when it one breaks I'll definitely be upgrading to a better one. If you're looking for one right now I'd definitely spend the extra $10.00 or so and get the one in this video.
if it's for the blue yeti highly recommend the one from tonor
I prolly have his old boom arm.. And I also like it it cost 4$ for the boom arm and 2 1/2$ for the pop filter... Though my review is taglish (Tagalog + English) so ya'll might not understand :/
It must not be named
Innogear! The cheap cheap one haha
been having this boom arm for about 4 months n i like it never had a problem
heck yeah!
Awesome review! I was looking for something of quality, and couldn't exactly find anything for this mic on top 10 lists and you not only showed us a nice product that serves multiple purposes for gamers (I'm buying this, the shock mount you mentioned and the World of Warcraft edition Blue Yeti X for my gamer brother) but you gave us a quality shock mount to use that isn't crap like every one I saw until I watched this video. You even gave a 15% coupon (assuming it still works lol) in the video description, which is just awesome.
Thank you so much for making anyone looking for Blue Yeti accessories lives so much easier lol.
great quality videos keep it up and you'll hit algorithms and get popular off of it because you videos are quality imo
Here’s to hoping!! 🤙🏼
I have been looking for a good boom arm for the Blue Yeti and this one looks perfect for what I need in my new set up and is affordable.
Thank you so much! 😊
Glad I could help!
Dang a company reached out to a RUclips with only 10k subs, just shows how underrated this is, keep up the work!
Levi Demmon will do!
i use this boom arm daily, definitely one of the best investments in my setup, i highly recommend
Love it!
BOYS JUST FOUND THE CEO OF “You Know” lmao
Your wayyyyy underrated keep up the great content and you will continue to grow!!!
Thanks, will do!
I’m glad I found this was about to buy one and then I realized you had a discount code! Will definitely be purchasing this tomorrow and to give you credit as well with the code thank you sir 💪🏼
hope you enjoy it man!
I’ve had this mic arm for a couple of months and it broke on me a week ago and for people who is looking to buy this you have to be very gentle or else it can crack. It is a very good arm for budget it’s just really fragile
Awesome channel, great pacing and quality. I thoroughly enjoyed the review and I'm happy to report that you convinced me to give this a try since I purchased the Rode PSA1 but was very disappointed that it wouldn't stay in place with my Hyper X Quadcast S even though I saw other reviews with that combination. Earned a sub!
Thank you so much man! I'm very glad I was able to help you out in your choice!
I usually like to put my mic diagonal. So I can see better, and it gets more quality.
Line of sight is just another benefit! 💪
I'm surprised you have only 12.9 thousand. The only reason I say "only" is because I thought this channel would have way more due to the quality of the video.
Thank you so much! i really appreciate that!
It really don't matter what way it faces, That just means you have to talk into it from the front, And it blocks out left right and from the behind! It don't matter what way the mic sits! The reason people tell you to do that is because its better to speak across the mic for spitting purposes but when its on a boom and you are sitting away from the mic, It don't matter either way! If you were holding a CB radio mic that's when this would matter! And you should never wrap wire around any kinda metal like that! You are pretty much making a coil
Great video man, just bought it! Btw how did you get that Halo wallpaper, I love it lol
wallpaper engine man! check out my video on it!
How does this dude only have 6k subs
Lets keep going up and up!
Just make sure you talk into the front of the capsule, if it’s got a cardioid pattern. If it’s omnidirectional it doesn’t matter. Makes no difference if the mic is upside down, on the side, whatever. Good vid tho.
True! I corrected that statement after making the video. Some other streamer advised me to do that but it really doesn’t matter
@@RAVisuals Cool dude, new sub!
7:42 setting up the boom arm
It starts here!
Thanks for the review, I just bought one
Hope you enjoy it!
@@RAVisuals is this arm compatible with the hyper x quadcast or is it only with blue yeti
where did you buy from? because it is saying it is not available
Just got a Blue Yeti!
thats so cool man, how is it? i am thinking about getting one
Lucky same
Seriously high quality content! Might have to buy this bad boy just because of your review! If you’ve got a code to input when purchasing I’d love to have it. Anything to support a channel with high quality vids like this!
they are currently on sale right now for like $20!! they're usually $40!
This is awesome I bought all the exact stuff so great to have a review of everything I bought all into one!
Just got the same arm after watching this thank you my guy
Hey am I bugging or does he have two desktops?
I'm also getting this arm
ssjbluevegeta Gamer it’s unavailable
It will be back in stocks soon
Damnit I had exactly 30 dollars I saved up on my stream over the tome of 5 months and I was thinking it would be a great investment to get the boom arm but now it 40 😪
i bought one on amazon for 18$ and the quality is fine
@@OK-tb1di which one did you get?
@@sarahallen8739 not sure. just looked one up on amazon and it was like 13 + shipping and tax. works fine and its sturdy
@@OK-tb1di oh cool cool thanks haha
AnTi RyZze now it’s 20
Thank you for this video. I am upgrading to a boom mic arm and had no idea what to look for!
honestly, the headphone hanger should go on the opposite side of where it currently is, making it easier to access rather than hanging under the desk. just my opinion, take it or leave it
I actually really agree with this! It can be a little annoying to access it where it is nit I was just so stoked they had it since it was exactly what I wanted, haha
I'm still going to get one, maybe a "stand alone" headphone stand too
Great review. Just came across your channel, and I am very impressed! Thank you for the help! I will most definitely be getting this arm.
Glad it was helpful! Stoked you found something that fits your needs!
Awesome review! Is there a discount code for the blue yeti or the tonor boom arm? New Sub!
Unfortunately not! Maybe one of these days I'll partner with them
Thanks much, Definitely upgrading to this when i get back home!!!
nice!
I like the look of that shock mount compared to the official Blue Yeti shock mount.
Hey would this be able to clamp to my dual monitor stand and come down over my monitors?
IAmSpicy ooh, that’s a good question. Honestly the way it’s designed, I don’t think it’s meant for that. It’s meant to clamp to a desk or table
That’s a great idea
They’re sold out do you know when they should be back in stock or if they will?
i’m wondering that too.
same
I'll contact them and ask for you guys!
RA Visuals thanks!
Thanks!
I can say that when I get a new Mic, you've sold me on that Adjustable Boom Mic Stand. I use to use a Logitech G430 Headset til the left Muff where the Mic is located broke by coming apart where the Screw was holding it in place. It is time for me to upgrade to better Equipment starting with my Vocal Equipment.
Grab yourself a blue yeti and you’ll be rockin!
@@RAVisuals Oh I am considering going with the Blue Yeti X, I am going to wait until my Birthday to get the Mic at least. I don't spend all willy nilly or go all spend it while you have it, I spend like a Boss and save like a Boss too.
Been considering something like this for a long time now, but you sold me on it. Ordered, as well as applied your code. This video was genuinely helpful, thank you.
Glad I could help! Hope you enjoy the arm!
I got both of these products, and I loved the arm, but the shock mount won't stay up because it falls and unscrews. I have it in the exact same orientation you did in the video, is there anything I'm missing?
You have to tighten it all the way and then even more till you get it to the position you want it in. Its a characteristic of the screw adapter.
Sir, you just sold me that boom arm! Also, could you send me a link for that dope light on top your monitors, pleaseeeee!
Nevermind! I got your gear link! You also sold me the lights! lol. Bro your content is pretty cool! I don't know why youtube doesn't suggest your channel! I think that your channel is so underrated.
Dude! Lets go! I hope you enjoy your new gear man! I love mine for sure and thank you for the kind words 🙌
Hey! Have you gotten your boom arm yet? If you have how do you like it so far? I was thinking of getting one
Nodi hey! Yes, i got it! You won't regret, you can save money buying this one instead another, this one feels sturdy and strong. The best advice i can give you is about the shock mount, if you own Blue Yeti Nano the wires will fit thigh in most of shock mounts i bought Auphonix which fits "fine".
Alright sounds good. Thanks for replying!
I just watched this video and I have two Tonor boom arms. They make great stuff great videos by the way.
Dude luv these videos man your totally underrated I get this tomorrow I’m so excited
Hope you enjoy it!
trying to buy it but it isnt available where i live!
sorry to hear that! they may just have to restock it.
same
www.amazon.co.uk/Microphone-TONOR-Adjustable-Suspension-T20/dp/B082YN7KY9/ref=asc_df_B082YN7KY9/?tag=googshopuk-21&linkCode=df0&hvadid=427895820204&hvpos=&hvnetw=g&hvrand=1978928114943195317&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046913&hvtargid=pla-891223995321&psc=1&tag=&ref=&adgrpid=99954789592&hvpone=&hvptwo=&hvadid=427895820204&hvpos=&hvnetw=g&hvrand=1978928114943195317&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046913&hvtargid=pla-891223995321
@Jorge Riera Try this link it is in stock for me in UK
Deco Ty brother
what mic r u using?
The normal blue yeti or the blue yeti x?
Blue yeti Blackout!
Same here!
Is there a link. Want to insure I get this exact one.
I'm pretty sure with cardioid as long as you're talking into the mic on the side with the Blue logo, I don't think it matters how the mic is oriented.
JustaKoreanGuy it honestly doesn’t but the sideways thing just helps keep it out of the way. I actually have it upright now.
@@RAVisuals bruh then you say it's supposed to be horizontal 😂😂
Zephrnos I was mistaken. It happens man.
I bought the bundle that has this boom arm (T20) and the condenser microphone (TC20). I have to say I am impressed. I only use my mic for voiceovers and podcasts and it is tied to my M-Audio M-Track Solo audio interface. $60 for the bundle and right now you get an extra 10% off. It's an amazing deal if you're just starting off.
Dude! Very nice. Glad you could find something to suit your needs man. ✊🏼
I was really expecting that you had more subscribers. My desk is really small and im really tall. Would this arm be too big for my desk?
I don't think so, it really doesn't take up that much space to be honest.
@@RAVisuals okay. Every mic arm takes a month to deliver or is out of stock wtf lol
Deadpool/Hunter WHY ARE YOU EVERYWHERE
@@loosies6418 what do you mean
Deadpool/Hunter i see you everywhere 😭
Tryin to get a boom arm but my parents won’t let me 😬
Are you not allowed to spend your money on a boom arm?
@@antonwestergaard5211 I asked and they finally said sure
SYKLIM Congrats :D
I will give these a try, but it will take a while for the Shock Mount to be Delivered. For some reason, there are Blue Yeti Boom Kits that come with Shock Mounts that don't fit the Yeti.
yeah, those are kind of dumb for doing that. But the knox gear one is perfect!
Went ahead and purchased the T20 Boom Arm and the 15% promo code still works! Will probably be posting an unboxing video of it myself and trying it out since I've started doing commentary a lot more with my Razer Seiren X! Liked and Subscribed!
Telling people that vertical vs horizontal orientation of the mic affects the sound quality in any way, let alone a specific pattern like cardioid, shows a lack of knowledge in audio engineering. Vertical or horizontal orientation does NOT affect the sound -- the only thing that matters is that when in cardioid you are talking into the correct side of the mic.
I was misinformed back when I made this video. I think I even pinned a comment a long time ago explaining what I meant by the statement. I know it doesn't affect what it sounds like. Its all about getting it out of your way if you need to
Just a heads up, if you own a Blue Yeti X, the shock absorber in this video is not compatible with it. Had to find out the hard way. Also there's no way to keep the clip from rotating so my mic just constantly swivels back and forth towards my monitor which is scary. Gonna be returning both items but never less a good video.
PulS MatriX hey man! Sorry that happened. I have addressed that in the comments a few times and told people the shock mount is made for just the yeti. I didn’t mean to mislead anyone!
@@RAVisuals haha no worries at all, still enjoy watching the videos, that part was on me. Should have digged deeper. If you have any suggestions for what you recommend or have a video, that'd be swell
Thank You!! Just purchased my first boom arm.
Fantastic!
trying to find an arm for a desk that is 5.5 inches thick but none of the clamps seem to be able to do that. Any advice?
ooh that's tough, I think this one only goes 3.5 to 4 inches 😢
I appreciate this video. Seems I found it at just the time I needed it as I was considering what to do about my microphone as I need it closer to me, but couldn't think of what to do, and then remembered boom arms. Appreciate the tip on it should be vertical too! Didn't know that!
jgillette98 don’t worry about the tip on it being vertical. I was mistaken about that! You can do it, but you don’t HAVE to. Just make sure you’re speaking into the front of the mic (where the logo is)
i bought it and it just came. it is very quality, thanks!
I love your halo wallpaper
Thanks!
I don’t have a mic yet but I am 100% buying this because of the video
Good choice!!
Thank Brother, ordered based on your excellent vid! Blessings, David
I ordered through your link! Thanks for the rec hopefully it works well!
Why wouldn’t you be able to position the mic up or down? I understand that the mic is side addressable but, the original stand that comes with the mic holds it in a vertical position.
You earned a subscriber my guy! Looking forward to your next stream!
Welcome aboard! Thanks for checking the channel out!
Hey, man! That tip about turning the mic sideways with the cardioid pattern isn't true.
Whether it's in its normal orientation, inverted, or on its side, the only thing you need to ensure is that you're speaking into the correct side of the microphone and that it's positioned properly so it picks up your voice clearly. (the side with the logo).
The only way it would make a difference is where the mic is positioned. If the main portion is pointed more towards your nose, you're going to get a less bassy sound. Same thing if it's pointed towards your chin, you run the risk of it sounding too muddy. Also distance from the microphone matters and adjust gain accordingly!
Hey man! Thanks for the feedback. I already addressed this and pinned a comment for it though, haha Basically saying what you just said 😆
Didn't have high expectations from the video, but you've delivered. the side by side comparison, showing how much more sturdy it is just made it for me. My search for my next boom arm is over. Thanks mate!
Arthur Zablocki i really appreciate it man! Glad I could help you with your decision!
@@RAVisuals Got it delivered, all set up now, it has made a huge difference!
Liked it all except what you said about the mic being horizontal. it can have it vertical, horizontal or upside down does not matter as long as you are speaking into the front, you do NOT want to have it pointing tip towards you.
I mentioned this in a comment after i made this video! Disregard that statement! I read something from another RUclipsr and they obviously were very wrong about it so that was my bad for saying it!
Will this shock mount and boom arm work for a blue yeti X?
About the headphone hook...
My desk has a solid side so their clamp would not work unless I cut a hole into the side of my desk (not going to happen). IMHO, their clamp should have a hook that sticks out from the desk - or one that is adjustable.
At 3:50, sorry, no that is not the actual arm. It is the clamp that holds the arm.
I’m so glad I found this video! I love my yeti but I wanted to make videos without the mic being shown is it possible with the arm… and if you don’t mind me asking, what mic set up were you using to do this video… it sounds great
I use a rode videomic pro + on a boom arm above me to record my "talking head" parts
@@RAVisuals thank you so much!
Mad underrated 😡🔥
Does it clamp to a glass desk well? Or will the clamp just slide around?
great video! i needed a budget boom arm for my blue yeti
Thanks for sharing. I'm pretty I currently have the same boom arm as your old one and I was honestly disappointed with it but just decided to keep trucking with it but now I'm ready for a new one.
Thanks for sharing!!
Can you do a updated video on your Blue Yeti sound settings? I can't seem to get mine to sound good
I sure can!
Thanks man I'll give em a try, just ordered
hope you like them!
Thanks for sharing. Why do you say that the Blue Yeti microphone needs to be horizontal (parallel to the floor) on cardiod mode? I have the silver Blue Yeti with USB connector (also the regular big one) and it comes with a base that positions the mic upright. The manual clearly states that cardiod should be used in that upright position.
I was misinformed when I made this video and pinned a comment saying that I was wrong about that. some streamers just orient the mic that way to get out of the way of their hands
@@RAVisuals Thank you for the clarification. Sorry I missed the pinned comment about that. I find these videos of yours super useful. I'm glad I found them.
May I ask if you still use the Tonor T20 or which one now and why?
I think you mentioned that the Tonor T20 is good enough for the big or regular silver Blue Yeti, but, the Amazon link says T20 is only good for the Nano Blue Yeti. Could you please help me understand this discrepancy?
Thank you again for sharing these useful videos man.
Hmm.. I feel like that mic orientation comment needs to be revised or clarified. The mic's orientation is not going to make a difference as long as you're not talking into the top end of it, which yes plenty of content creators have done poorly. You just have to make sure you talk into the side with Blue logo, preferably about 6-8 inches away and you're good. The only thing to note is that because the two capsules in front are vertically offset instead of horizontally leveled, you might have slightly louder or quieter pickup depending on the height you speak into the mic and the angle of your head since you'd effectively be speaking straight into the front of one capsule or the side of the other. This is irrelevant for this video though because this will only make a difference in stereo mode given that stereo outputs in dual channel using the front capsule signals. Since cardioid mode is just passively mixing the signals from two capsules in the front, there's physically and electrically no way for it to make a difference.
tl;dr - Yeti oriented upright is fine. It doesn't make any difference whatsoever because of the positioning of the mic capsules and the way yeti mixes its signals in cardioid. Keep hanging them yetis if that's your thing.
Great video aside from that. Thumbs up :)
Puahaha thank you for the comment and all the info! I have since revised the way I orient my mic because it was something that I saw a ton of you tubers do and I THOUGHT at the time this is what blue suggested. In fact it was not the case and it was exactly what you said in your comment. I’m using mine upright now after Lear info all of this haha
@@RAVisuals Just got done watching some of your other content. I love your production quality! Looking forward to the next live stream :)
Puahaha thanks a lot man! Glad to have you on the channel!
Great video and about the product all I can say is amazing quality worth the 30$ (on sale right now for 15) :)
Totally agree!
Just got a blue yeti and I'm definitely buying this
*Great review and very clear. I've just recently bought a Blue Yeti and now buying this badass boom arm! Count me as a new sub!*
Welcome aboard! Thanks for the kind words!
If you ever have the budget In the future, if this breaks (if it doesn't break there is no need) get a used rode psa1 or of you have a bit more a blue compass. But this boom arm is really worth it.
Great video my guy. Such good quality for a small channel.
He needs more subs