Installing Metallic Epoxy Countertop Using Dirty Pour Technique | Simple Training Made Easy DIY
HTML-код
- Опубликовано: 18 июн 2024
- For this video, you'll watch the step by step process on how to do this technique on your countertops. You can coat over tile, Formica, granite, wood & more! Resurfacing your countertops has never been easier. You will watch from beginning to end how it's done using this awesome and simple technique. All of our kits are DIY friendly so don't be intimidated, there are customers all over the world installing countertop kits, you can do it too!
This is Leggari Stone Kit #7. The colors used were Midnight Pearl, Adamantium & Bronzer! Here's the link: leggari.com/product/leggari-s...
Check out our Leggari Effects here: leggari.com/product/leggari-e...
The process! 👇👇
THE SUBSTRATE
Prepping the surface of the countertops is easy. Most surfaces just need to be sanded (80-100 Grit) then wiped clean. Granite and Marble will need the sealer removed. Tile will need the grout lines filled with Bondo and sanded smooth before applying our Countertop Kits.
EPOXY PRIMER COAT
Priming the Countertops is simple and fast. Mix your pre-measured primer then dip and roll the pigmented primer across the surface until the countertop surface is completely covered. Wait 1 hr. (or until tacky and not coming off to the touch) and start applying the Base Coat.
METALLIC EPOXY COAT
There are so many different applications for our metallic epoxy coat. In this video, we show you the dirty pour technique. When you place your order you'll receive step by step tutorial videos that will show you how to apply this part depending on the look you're going for!
HIGH WEAR TOP COAT
We offer 2 different Performance Engineered Top Coats. Glaze Coat is our High Build Top Coat that lays out like glass and adds depth to the Countertop. The Urethane Top Coat comes with the option to have a High Gloss or Matte finish. It needs to be rolled out super thin and leaves a minor texture on the countertop. You apply it within 24 hrs. of installing your Countertop Kit
Leggari Countertop Kits were designed to transform your countertop, tabletop, or desktop into something new and beautiful by coating your existing countertop or pre-built wood countertop. They can be installed in 3 to 5 hrs. including the prep work, and will last for decades. If you can paint your countertops, you’re more than qualified to install a Leggari Countertop Kit. Our Countertop system is leading the resin industry for thickness, durability, and scratch resistance with our High Wear Top Coats.
Our Countertop Epoxy is specifically designed for counters and can be applied to any hard surface. It’s 100% Pure Solids using the finest raw materials that include proprietary additives for working time, thickness, flow, and marbleization that are vital when achieving our Dynamic Effects. Our Countertop Epoxy is also a decorative, durable, and chemically resistant coating, available with a High Gloss or Matte finish.
#leggari #leggaristone #leggariproducts 
Хобби
Let us know what colors you'd like to see for a Leggari Stone Kit! Comment below! 👇😃
Muito bom, infelizmente com o cenário de corona vírus no Brasil, meu sonho de trabalho com epóxy está sendo exterminado.
Ocean colors, white, blue, green like an ocean wave!
Light colors. Not everyone likes black, bronze, orange and browns. White, blue, light green or teal, peaches, pale yellows to brighten smaller spaces. Those counter tops look basic black until you get on top of them. The original version gave a bigger wow factor.
Light base like pearl or white with grey, silver and small veins of black.
Blues, aquas, teals, greens
I have watched probably over a hundered videos on epoxy counters, and this is by far my favorite Thanks
Saludos genio muy bueno tus trabajos. Exelente saludos desde Argentina.
Thank you for the in depth mixing information. I learned the most from this video. (I've been addicted to watching your tutorials) Also thank you for the different pour technique! This is probably my least favorite, but it just shows you how versatile your product is!
I wish you'd show more backsplashes!! 😁🤞🏻
Wow I Promise to get one of these soon . It actually looks fun.
It is! You'll have so much creative freedom using our products. Here are some customer projects we love! 👉 leggari.com/gallery/
Check out the countertop kits we offer here 👉 leggari.com/order-countertops/#standard-epoxy-kits
Your work is stunning 😍!!!!
Amazing work.
I am learning from you, thank you very much for informative video. I like black countertop which looks like granite marble or white with black river lines
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
You had me at Dirty....
They turned out awesome 😍😍😍
Thanks again Naptime, glad you enjoyed the video
@@LeggariProducts 😊😊😊
Really amazing ❤it's scratch proof or what i would like to know about more details. India
Amazing
Thanks for watching!
Отличная работа ! Смотрится хорошо
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Do you have kits for smaller counters? My kitchen is small, only 2x10 counter.
when doing this technique, do you need to use a clear coat to finish it off to protect the finish ?
Mantull,sukses slalu
Terima kasih
Okay, I guess I finally know what colors I want for my countertops. LOVED this one, but I think I would like one with less black, a bit more grey and rust colors. I have seen other videos of how to coat laminate backsplashes, but could you address how to do it with this technique? I can't imagine how you would handle a vertical surface with the cardboard. Thank you.
Please contact our techs at 844-534-4274 ext. 1 and they can assist you.
Hi dobson from England why use urethane over the finish epoxy?.
Still Looks Amazing!!
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
I want to buy Resin and hardener, where can I get it and at what prise? Iam in Togo. For the floor, how many kg of resin and hadener can I use for 1 meter squarre?
Could these same techniques be used with using your products over granite countertops or would I have to sand it first?thanks tyler
Yes you will have to sand it first.
www.dropbox.com/s/hejn1v0zji35u6k/Application%3AInstallation.pdf?dl=0
if your going over a formica counter top, with your product even with your primer do you sand the counter first then primer?
MrCustomConcrete they have video for doing over any counters
Yes you do, take a look at the link below that shows the prep work for going over different surfaces.
www.dropbox.com/s/hejn1v0zji35u6k/Application%3AInstallation.pdf?dl=0
Think a large dust pan with handle would work great where you use the cardboard?
That would also work but when we are moving fast we like to use the cardboard because it is wider.
Leggari Products that was good looking job. I like the more subdued look lol less radical lol
💯👌🏼👏🏼
Very interesting i would like to get the opportunity to work with you guys can you send me a start up kits many thanks Dobson
I need grens metalic epoxic complete kit
Do y’all sell these at Lowe’s or I gotta order online
We only sell the product at leggari.com
online.flippingbook.com/view/364043
Can i buy material from Mexico?
Can achieve this look much easier and quicker using your hands, not wasting Epoxy that soaks in to the cardboard and avoiding more potential for a mess. I like the out of box but think smarter, Not harder, besides that, great video
Thank you for watching!
What is the square footage of the countertops you are pouring ?
They are about 35 sq. ft. One of our dirty pour kits will do 50 sq. ft.
♥️🔥
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
They look awesome... Do they scratch easy????
Epoxy in general can scratch that is why we recommend our urethane top coat to make the surface more durable.
@@LeggariProducts is there a way to fix them
what type of alcohol do You guys use instead of torching?
They use denatured alcohol to mist any bubbles.
Hello! This material after drying, supports heat? like putting a hot pan on it?
We never recommend putting hot things directly on the counter and always use hot pads! But can it be done yes for a short period of time!
@@LeggariProducts Thank you for the answer.
I may need price list with descriptions
What is the primer you use in your work?
Leggari WB primer get it at leggari.com today!
How much per galon of each
How do you keep it off the blurb to ape along the wall
Are the counter/ epoxy food safe?
Yes they are, as well as our Urethane Top Coats. Thanks
Would like to see the top coat
We will be launching one soon be on the look out!
Never saw epoxy done without a torch or heat gun
How many layers of epoxy does that countertop have on it now? :)
Maybe two or three previous coats. We first sand them down then applicate the new product.
It's fun making a mess when you're a kid because you know you won't be the one cleaning it up :)
That is so true, thanks for watching the video
Tried reaching your company yesterday to place an order... Then Went to the chat area.. Nothing but a request for my email.. Plz get in touch we really want to purchase your product to do 60sqft of countertops.. Is your product heat resistant?
The epoxy can withstand up to 200 degrees Fahrenheit. You can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>> Custom Counter Kit Here, then the link order Countertop kit, then follow the steps. Or you can contact us at 844-534-4274 and if we don't answer please leave a message and we will call you back because we take a lot of calls daily. Thanks
If you can't get ahold of anyone please email customerservice@leggari.com Thanks
What’s the work time?
Once you add the hardener to the epoxy you will have 45 minutes to an hour to work with the epoxy.
Do you get a scratch?
We apply our urethane top coat over it because it is four times harder than the epoxy and makes the surface more durable.
I just did this kit and it was a fail. I mixed everything and split the mix exactly as you guys demonstrated in your video and link sent with the kit. Half way through the pour the epoxy heated up to nuclear temps and what was put on the counter globbed up and did not roll off the edge as in the video. So now I have counters that look like the Rocky Mountains because part of it solidified while other parts stayed pliable. Very disappointed. So this was an epic fail.
OMG, it made cringe a little when you went over those BEAUTIFUL counters with the primer!.... what is the working time with your Epoxy?
Once you add the hardener to it and immediately get it out of the bucket you will have 45 minutes to an hour to work with it.
You can't go wrong with being nasty here..
✨Sexy!✨
That's another way to look at it. Thanks for watching
Saludos genio muy bueno tus trabajos. Exelente saludos desde Argentina.
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043