Who knows better upgrades for Ender 3 Pro? 😊 And, which upgrade did you like the most? 😅 Buy your new 3D Printer using following links to help the channel😊: Ender 3 Pro ➙ geni.us/ender3-pro Ender 3 V2 ➙geni.us/ender3-v2 Ender 3 Pro ➙ geni.us/cr-ender3
yeah, he really should have turned the holes 90 degrees, i think it might be because the file on thingiverse must have been made for the 3 but the 3 pro PSU has its holes different, just to be different i guess.
Isnt it bad to carry your printer from the cross bar at the top? Like how was shown here with the handle you can print. Isn't that just asking to throw it off of square?
I was thinking this. The cross bar is only for keeping the Z beams rigid and never intended to hold the weight of the hole machine. You should always pick up a printer from its base. Even then, printers like this (Ender/Prusa) That are just a frame and a base are verry much a set and forget type deal. Moving it from where it was built always has a chance of nocking something askew, and may require adjusting when replanted.
I printed 5 handles and everyone had issues until I did it with supports then I was sanding the 5th one and it broke the 6th one I made tonight really THREW my bed way off and I can NOT get it balanced now!! Any help???
Can someone help me I printed the tool box installed it and now a wheel screw under my bed hits the top of the box Can the screw be shortened or moved up?
My Enders 3 V2 has stopped lifting wallet prints after only two weeks. Can it be stepper motor is going bad already? I'm not abusing it. I've reached out to the manufacturer and so far been ignored. Any help or advice would be appreciated.
Hey i recently got the ender-3 Pro, and whenever i try printing something, it starts from the side and then messes everything up, it does print properly. but when i print the project they gave (the one in the sd card from shiping) it print properly. Can you please tell me why this is happening? Thanks
I printed and installed a dual drawer for my ender,but my y axis wheel(under the bed) bumped into the surface of drawer when printing….I can’t figure out the reason?Is the file wrong?
@@filip8985 Not sure how well the air flow for the nozzle will do with PLA. It's pretty warm down there and mine warped before I even started printing. Just went back to stock. Everything else should be fine tho. ABS prints fine on the ender 3 but you should have good ventilation. Creality actually gives you a small amount for the sample prints on the USB flash card they provide.
@@engineericly It's awesome. It gives better retractions and prints Flexi filaments easy no issues, I have it with the all-metal hot end for micro swiss and the print quality is amazing it has improved in my opinion, for me at least it gave me better print quality better retraction, and the ability to print flex filament with the great quality I did a 20x20 cube and quality was awesome and every side was 20,00mm except for one which was 20,02mm.
@engineericly is the extruder already modified? i printed the knob but i cant stick it on since i dont have the piece of metal sticking out above the golden one
Hi mate. I would like know how can you measurement exactly to get fit ( I measurement correctly but it was wrong size after I printed it out. Could you please share to me. Thanks mate
I’ve printed some upgrades for another printer on pla and they work great unless you try to print abs then I wouldn’t recommend but there also higher heat resistant pla so you can get that but I still wouldn’t try to print abs in an enclosure with them
i dont know if you noticed, but print quality is really bad, this printer has much more potential. You should ditch all "upgrades" and figure out what is causing problems, printer is good on its own.
@@themblue8236 this is not slicer problem, it is physical. Cura is nice as a first slicer but prusa has way more freedom + you can run custom code to produce even more tailored .gcode
Well, the times for the print can change if you change the slicer config, I printed the drawers with the 1 mm nozzle instead of the default 0.4 mm, so it took like half the time, but it is something you learn as you print.
No its my dream printer ..... And creality cr 6 se too ❤️ and biqu b1❤️ .... Oh they all are so good 😳 still can't own one 😭😢 Btw why are you asking so? 😅
Anything near heat will melt or deform when printed with PLA. Your bed handle will break very quickly :p You should print stuff like that with PETG or ABS. All metal hotend, Trianglelab BMG extruder, Hydra Fan Duct (PETG or ABS) direct drive conversion and dual 5015 blower fans, yellow bed springs, springsteel sheet with PEI and belted Z mod. This will make the machine perfect. A reliable workhorse that prints the same as a prusa at half the price. (I have both). Also upgrading the mainboard to 32 bit so that you can have newer firmware with linear advance enabled is the biggest boost in print quality you can get
Just need to take the table off and flip the screws upside down (nuts on top and button heads on the bottom) if you don't want to print it again. There is a remix of the drawer with the screw notch too if you want to print it again.
The best thing about these is makes your 3D printer look much cooler and makes it more functional. In addition, it's green, which is my favorite colour.
You whould add noctua fans and replace them. Replace the extruder cooler and replace the fans to silence the printer more. Get an all metal extruder to print with better filaments. Also use a direct drive for printing using tpu. Add belt tighteners and led lights. By the way . I love your videos
where did you get the STL files of Creality ender 3 pro parts to therefore design your own upgrades ? Do you mind sharing your resources as I didn't find them
Who knows better upgrades for Ender 3 Pro? 😊
And, which upgrade did you like the most? 😅
Buy your new 3D Printer using following links to help the channel😊:
Ender 3 Pro ➙ geni.us/ender3-pro
Ender 3 V2 ➙geni.us/ender3-v2
Ender 3 Pro ➙ geni.us/cr-ender3
The bearing spool holder is pretty good used it for a year no problems at all
+ the flexi filament extruder mod( printable) and the top mounted tool holder
The drawers
Can you make'Pendulum'
I am eleven years old
The damping feet are a great idea but you're meant to level the base before you assemble it so it doesn't wobble like that..
Took his power supply and made a cover to direct the exhaust into the intake. Genius!!
lol
yeah, he really should have turned the holes 90 degrees, i think it might be because the file on thingiverse must have been made for the 3 but the 3 pro PSU has its holes different, just to be different i guess.
that is the "Ender 3" version... that is so wrong lol
He's trying to create an oven
Genius ki ulaad
the damping feet are good for silencing vibrations, but you should definately still square up your 3D printers frame :P
He is my son😊👍
😊😊😊
The prodigal dad!
Such a lovely family relationship
Based dad
Ppl p
That music and the sounds from the plastic leaving the surface are so calming.
The time lapse scenes are sick. Well done
Thanks 👍🏼 What about the power supply silencer? air flow? Temperature? Any issues?
Thank you for adding the time to print for each item!
Just ordered my Ender 3, and ironically can't wait to print upgrades for it! Great video
Ironically means something other than what you seem to think it means
@@fluxpistol3608 hmm, isn't that ironic?
a machine making parts for itself. im doing the same currently. have fun
Hello. Very satisfying printing. I bought Ender 3 pro and i decided to use some of these upgrades. 🌞
Neat ideas but I'm going a different route on all the designs. Glad you had fun, that is what it is about.
И каков же ваш путь?
Nice Video it's PETG or PLA?
"Hey, I bought a 3D printer!"
"Cool. What do you print with it?"
"Mods for my 3D printer. Duh."
Lmfao 🤣🤣🤣
Really like the green on these wonderful mods
Isnt it bad to carry your printer from the cross bar at the top? Like how was shown here with the handle you can print. Isn't that just asking to throw it off of square?
Yep
I was thinking this. The cross bar is only for keeping the Z beams rigid and never intended to hold the weight of the hole machine. You should always pick up a printer from its base.
Even then, printers like this (Ender/Prusa) That are just a frame and a base are verry much a set and forget type deal. Moving it from where it was built always has a chance of nocking something askew, and may require adjusting when replanted.
Amazing work😮
What slicing software were you using and what settings were you using?
very beautiful and creative inventions, the irony is to print them all and use them for printer.
Irony means something other than what you seem to think it means
@@fluxpistol3608 Bro I'm Turkish man, sorry for my English
Where'd you get that screwdriver from?
Strangely satisfying to watch
Hello I have a question these upgrades are also compatible with the printer
ENDER 3 MAX ???
Some of them!
Very good job
I printed 5 handles and everyone had issues until I did it with supports then I was sanding the 5th one and it broke the 6th one I made tonight really THREW my bed way off and I can NOT get it balanced now!! Any help???
I would never pick up my printer by the top beam. That risks misaligning the metal extrusions and plus, all that weight is being held by those 4 bolts
each one of those 4 bolts could support my bodyweight lol its fine
I'm currently running some of these mods in the same green. thanks for this video!!
Did you do something to get your extruder knob to fit? Mine looks differently.
i imagine its just a tight fit, if yours is loose you could glue it
Can someone help me I printed the tool box installed it and now a wheel screw under my bed hits the top of the box
Can the screw be shortened or moved up?
Cool stuff guys,which upgrades your Ender.
What driver set is that your using? Can I have the link to purchase one?
I just got the AnyCubic Vyper and it has ALL THISand MORE!!! STOCK out of the box!!
Thanks 😊
My Enders 3 V2 has stopped lifting wallet prints after only two weeks. Can it be stepper motor is going bad already? I'm not abusing it. I've reached out to the manufacturer and so far been ignored. Any help or advice would be appreciated.
Hey i recently got the ender-3 Pro, and whenever i try printing something, it starts from the side and then messes everything up, it does print properly.
but when i print the project they gave (the one in the sd card from shiping) it print properly.
Can you please tell me why this is happening?
Thanks
What brand and exact color green is that?
I printed and installed a dual drawer for my ender,but my y axis wheel(under the bed) bumped into the surface of drawer when printing….I can’t figure out the reason?Is the file wrong?
I struggle a little with the language, but nice video! Thanks for sharing!
is this a projector?
Wow they are awesome upgrades. Which filament did you use to make those things?
probably pla, i wouldnt use abs in an open style printer
i think pla or petg maybe?
@@filip8985 Not sure how well the air flow for the nozzle will do with PLA. It's pretty warm down there and mine warped before I even started printing. Just went back to stock. Everything else should be fine tho. ABS prints fine on the ender 3 but you should have good ventilation. Creality actually gives you a small amount for the sample prints on the USB flash card they provide.
Nice video, but please never shoot black devices on black backgrounds...
No drag chains? Thats what I would like to see next.
Do these also apply to the v2?
what filament material did u use?
awesome , well done
Those are great parts! I would try Cheps Cura profile your prints will look alot better
07:45 LOL work LOL...
This is awesome! I can highly recommend micro Swiss direct drive best upgrade ever!
Have you done this upgrade, please can you tell me how is the printing results after the upgrade?
@@engineericly It's awesome. It gives better retractions and prints Flexi filaments easy no issues, I have it with the all-metal hot end for micro swiss and the print quality is amazing it has improved in my opinion, for me at least it gave me better print quality better retraction, and the ability to print flex filament with the great quality I did a 20x20 cube and quality was awesome and every side was 20,00mm except for one which was 20,02mm.
What filament is this?
So the feet for the ender 3 caused significant echoing in my prints. But they’re successful for others. It’s a quick print, so test it out!
yeah those feet looks wonky haha
Danke
@engineericly is the extruder already modified? i printed the knob but i cant stick it on since i dont have the piece of metal sticking out above the golden one
Creality changed the stepper motor, it no longer has a shaft.
What color filament was used?
Holy crap! What are your print speeds? I must be printing in turtle mode. My drawer took 4 and half hours at 100 speed
How? What are your printing speeds? And how do you change it? Thanks
Nice .........love long vids ❤️
Glad you like them!
Link for filament?
No bright green cable clips?
Hi mate.
I would like know how can you measurement exactly to get fit ( I measurement correctly but it was wrong size after I printed it out. Could you please share to me.
Thanks mate
if your not using calipers i recommend that, but you just be able to download files that shud fit right
did u calibrated ur printer there is a calibration settings u can do it with printing a calibration cube
Ficou até mais bonita, a comunidade Ender 3 esta de parabéns.
Obrigado pelo seu comentário amável :)
Great film. When this will be a series, that you have 1M subscribes!
More hack videos!
I think Ender 3 is one of the best budget 3D printer
Yes, maybe the most customized 3D Printer ever 😅
Cool job
Hello, thank you :)
Did you do all those prints in PLA?
I’ve printed some upgrades for another printer on pla and they work great unless you try to print abs then I wouldn’t recommend but there also higher heat resistant pla so you can get that but I still wouldn’t try to print abs in an enclosure with them
Very cool.
Hey all do you have the files for for all these upgrades feel as if the main machine should come with all these included love the storage ideas
Great video only thing I wouldn’t do is that Filament guide. because there are a lot more simple filament guides that take a lot less filament!
I thought that was the coolest filament guide ima definitely try printing it
The power supply silencer is not supposed to be oriented to blow into the intake. This is how you kill a PSU.
Thankss !!
Where do I find these mod download
i dont know if you noticed, but print quality is really bad, this printer has much more potential. You should ditch all "upgrades" and figure out what is causing problems, printer is good on its own.
@@themblue8236 this is not slicer problem, it is physical. Cura is nice as a first slicer but prusa has way more freedom + you can run custom code to produce even more tailored .gcode
I was just going to say he should focus on the actual printer instead of upgrades😅
Brilliant video but the best thing is you give times for the prints
Noted!
Well, the times for the print can change if you change the slicer config, I printed the drawers with the 1 mm nozzle instead of the default 0.4 mm, so it took like half the time, but it is something you learn as you print.
Awesome!!
Anything for ender 3 v2
Do you use Ender 3 v2?
No its my dream printer .....
And creality cr 6 se too ❤️ and biqu b1❤️ ....
Oh they all are so good 😳
still can't own one 😭😢
Btw why are you asking so? 😅
@@sapnarani2095 konsa hai apke pas?
@@BassBoostedWorld koi bi nii 😂😂
@@sapnarani2095 you can get one for under $200 from comgrow sometimes
Anything near heat will melt or deform when printed with PLA. Your bed handle will break very quickly :p You should print stuff like that with PETG or ABS. All metal hotend, Trianglelab BMG extruder, Hydra Fan Duct (PETG or ABS) direct drive conversion and dual 5015 blower fans, yellow bed springs, springsteel sheet with PEI and belted Z mod. This will make the machine perfect. A reliable workhorse that prints the same as a prusa at half the price. (I have both). Also upgrading the mainboard to 32 bit so that you can have newer firmware with linear advance enabled is the biggest boost in print quality you can get
That filament guide isn't good. Friction will make it so it's uneven. Ball bearing devices are much smoother.
the dual drawer and the full pcb cover has the exact size as a ender 3 max ?please answer :)
care full i made it and its not compatible with ender 3 max guys
So right around 68 hours?
I see your knob cover wasn’t tight either! A bit of double sided tape fixed that.
how to make money with this printer? I know how to model things and how to print. Please suggest.
😍 definitely I should update my ender 3 like this
Will you share images then? 😅
@@engineericlysure.i will tag you 😊
I just discovered that my Ender 3 Pro does not have an extended bolt on the extruder. ☹️ So I can't use a filament knob.
I just got the ender 3 pro last week and found mine to be the same :/
Nice upgrade 😀👍!!!
This very very pro...because they printed thing that upgrade the printer...
Thanks 👍
Amazing work🔥😍❤👍
Thank you! 😊
@@engineericly ❤👍
I printed one of the drawer systems. Didn’t fit. The screws to the bed hit the back of the drawer.
Just need to take the table off and flip the screws upside down (nuts on top and button heads on the bottom) if you don't want to print it again. There is a remix of the drawer with the screw notch too if you want to print it again.
Elinize emeğinize sağlık teşekkürler :)
Very Great 😍❤️
These are not upgrades, it is just to complete the things that the company is missing ! Thank you.
Thanks for the info! :)
and some of them actually are bad for the printer, like the power supply fan silencer. It makes the intake for the fan right next to the exhaust
First
Edit:-For real
Yes, I saw you were the first again, Congrats brothers 😊
I wish I also had 3d printer. 😭😭
Wie geil is das denn,wow....👍👍👍
What material did u use? Just PLA?
Ended 3 and pro uses the same parts?
It depends on the part, some parts are identical, so do a check before printing
The best thing about these is makes your 3D printer look much cooler and makes it more functional. In addition, it's green, which is my favorite colour.
Yes, mine too 😄
@@engineericly there is one thing that I want to know. Can you 3D print lego minifigures?
Yes, indeed if it is cool design :)
and doesn't violate copyright rules
@@engineericly Thank you. I asked it, because it's hard to print the hand part that looks like a wrench and it's tiny.
you put the base plate under the LCD in backwards
You need to calibrate your printer….inconsistent layer lines
That shroud for the heat sink is a terrible idea. It doesn't really reduce noise and directs hot air back into the power supply.
the hot air is an issue, but it does reduce fan noise a little
You whould add noctua fans and replace them. Replace the extruder cooler and replace the fans to silence the printer more. Get an all metal extruder to print with better filaments. Also use a direct drive for printing using tpu. Add belt tighteners and led lights.
By the way . I love your videos
Hello, thank you for your tips, maybe I make 2nd part including your ideas :)
@@engineericly i cant wait to see it.
whats the screw driver set you use to undo all the screws?
wow amazing
Thank you for your attention!
where did you get the STL files of Creality ender 3 pro parts to therefore design your own upgrades ? Do you mind sharing your resources as I didn't find them
This is one the best Ender 3 pro upgrade videos ! Time to print!
Hello, thank you for your kind comment :)
@@engineericly thank you for your work man, it’s printing as we speak))
I also used ideaMaker in the Ender 3 Pro but the Cura slicer prints much better !!!