17 Essential Upgrades to Enhance Your Creality K1
HTML-код
- Опубликовано: 29 апр 2024
- 17 First Upgrades For Creality K1 - Best Mods for your Creality K1
PCBWay: Your 3D & CNC One-Stop Solution ➙ bit.ly/MyPCBWay
Get Creality K1 ➙ geni.us/creality-k1
Get Creality K1 Max ➙ geni.us/creality-k1-Max
Get Creality Halot Ray ➙ geni.us/Halot-Ray
Get Creality UW 02 ➙ geni.us/creality-uw-02
Support me on Patreon for more videos ➙ / engineericly
• MY TOOLS
- Soldering Iron: geni.us/my-soldering-iro
- Drill: geni.us/drill-mi
- Portable Airbrush: geni.us/portable-airbrush
- Glue Gun: geni.us/hoto-glue-gun
• UPGRADES
1. 270° Door Hinges Geared: bit.ly/270-hinge
2. Magnetic door catcher: bit.ly/door-magnet
3. Nu-K Riser: bit.ly/nu-k
4. D3D 5015 Bed Fans:
Stl file ➙ bit.ly/bed-fans
5015 Fan ➙ geni.us/5015-fan
5. Side protector: bit.ly/side-fan
6. Auxiliary Blast: bit.ly/auxiliary-blast
7. Extruder Fix:
Stl file ➙ bit.ly/extruder-fix
New Extruder ➙ geni.us/k1-extruder
8. Ceramic Hotend: geni.us/k1-hotent
9. D3vil Burner KNOMI:
Stl file ➙ bit.ly/burner-head
KNOMI V2 ➙ geni.us/knomi-2
10. PTFE tube guide: bit.ly/tube-guide
11. Tool holder: bit.ly/tool-holder
12. Glue Stick Holder: bit.ly/glue-s-holder
13. Grease holder: bit.ly/grease-holder
14. Carbon Filter: bit.ly/a-carbon-filter
15. Air duct: bit.ly/air-duct-rear
16: Build plates: geni.us/LtK9r
17: Build plate holder: bit.ly/b-plate-holder
• DISCLAIMER
- All extraordinary acts in this video were done by video editing.
- We don't own the 3D printed models in this video, They belong to their respectful owners.
- Some works may be done in the background to make the video more interesting
• TAGS
#engineericly #3dprint #3dprinter 
Наука
Support me on Patreon for more videos ➙ www.patreon.com/engineericly
@engineericly will you please tell me what raiting was the wire that you used from the spool and can iget a link to it i really want to do the fan upgrade to control chamber temp but do not want to install the wrongly rated cable for the job please help and also what screw sizes are you using for the fan assembly under the bed and attaching them to the assembly???
What is the filament u using? I guess abs?
When the editor gets paid a bit too much:
So much;)
That's more than you can do with plain editing. That requires planning each shot in advance and filming it perfectly. That's true cinematography
@@svgPhoenix bit too much cinematography
Yea soo much 😂😂😂😂😂😂😂 I kept laughing your the reason I buy this 3d printer
Bro the editing 📈
Glad you like it, man:)
Editor: Which video effects do you want?
Engineericly: Yes!
:)
I don't have a creality but your video was so amazing that I watched it to the end. The graphics and animation was amazing.
Dont own the printer but watched the whole thing hust for the editing. Earned a sub sir!
thank you for your feedback!
I will try to make more editing tricks in upcoming videos as well :)
Arrived for the printer, stayed for the editing. +1 for the K1 Max video next
Great upgrades = awesome video edit
But I have K1 Max, so can't wait to see what you have for that one.
Thank you for your feedback,
I hope this video gets more views, so this will inspire me to make K1 max version as well:)
Well done, and I love your creativity in making your show entertaining. Thank you for the tips!
Glad you like them!
So much effort in this video, amazing job!
Loved this whole video. The edits were simply amazing 👏 🤩 and I esp loved the ending of the video. That's how I feel about my k1. it's so beautiful 😍
The cuts are perfect! Great editing!! This was a Really well made video! 👍
Thank you so much!
Dude, that was great. I'd love to see part 2 and the one for k1 max. I'm going to be copying some not all of these ideas for my machines.
Same!
Thank you for your feedback,
I hope this video gets more views, so this will inspire me to make K1 max version as well:)
Love the video...the jump to finish prints were funny! Please do one for the K1MAX...PLEASE!
Thank you for your feedback!
Amazing video. Can't wait for the K1 Max video.
Thanks for the whole kit upgrade explaination. Plus, It's the ending date outing for me. 😂😂😂😂😂
Thank you for making this video. It is brilliant, the video effects are amazing. Cheers and have a great day.
WOW!!! Excellent!!! But the corner connectors for the Lid raiser are not in your supplied model files. Where can I find them, please?
Love the editing! Great video
Thanks so much!!
Woww editing skils are a pure masterpiece!!
One of the best clips ever 👏🏼
I've been hoping for a video like this! I would do it myself, but the only problem is I lack the K1 and all the upgrades lol. Absolutely amazing video mate, it feels like I'm watching Scott Yu-Jan with how well the video flows. Love the upgrades and machine too. I'll definitely be using your video as inspiration when working on future videos. All the best! Cheers, Tommy.
Thank you for the feedback!
Hope you will get K1 as soon as possible :)
I am inspired by his videos as well☺️
Dobra robota przyjacielu!
Dziękuję ci.
Nice video editing work. And incredible mods. I'd love to see what can be done for the Bambu Lab X1-C.
Crazy work.
Thank you that was a really good video.
sensacional! excelente video! só os realmente melhores upgrades para k1!
Thats really good!
Thank you!!!
Great topic, thansk 👍
Nice mod ideas...and dope effects LoL!
Good job bro 🥳
incredibly well made video! No wasted time and a touch of humor :)
Glad you enjoyed it!
Video vapshe daxshat chiqibdi
Omad ishlarizga malades
Cant wait to see video for k1 max :D
This editing = subscription
Excellent video! I was just hoping to see a support to change the position of the 3D filament spool.
Great vid will these work on the K1C?
You made me set the speed down to 1x and watch the whole thing as a mini movie. Great scripting, production quality and editing 😍
And I don't even own a K1, and probably never will 😅
Nice graphics bro some of the best I’ve seen on RUclips
Wow, thanks
Love your work and the edits, where i can learn how to edit like your vid? like timelapse printing
Thank you for your feedback:)
My editor said that he will make a tutorial once this video passes 1M views 😁.
He is serious about that 🤭
This video tickled my brain. ❤🧠
really fantastic edit! müthiş emek var, izlediğim en iyi edit, tebrikler kardeşim, Türkiye'den selamlar...
Thank you for the great video. Which Resin material did u use ? And which two colours did u use for the paint ?
Insane stuff
Thank you!
This is an awesome video, I have had alot of these problems with my preorder K1 and will be implementing most of these upgrades. I would be really curious to see how the printed extruder compares to the newer creality model (i ordered the new one but plan on making the printed one out of my old extruder as a backup or for another build). I also used the same clip for the bowden mount but i found the ptfe cable went to high up and I heated it with a lighter (or heat gun) and let it bend down a few degrees to make an easier transition to the bowden tube running on top of the chain link with clips.
Thank you for your tips:)
Printed extruder was great as well, no changes in quality of prints, but changing filament was hard with that
@@engineericly Thanks, Do you think it would be difficult to make the printed extruder run with a Nema17?
Edits on this was next level
great editing
Glad you think so!
Really nice put together! Nice job. What is the hand pump/spray you used to paint the new toolhead front?
Thank you for your feedback.
Here it is(affiliated): geni.us/portable-airbrush
Keep it up! That was a great video! Not my taste for the risers but otherwise great job!!
Thanks! Will do!
Amazing
Thank you! Cheers!
#9. The display in the print head is of course very cool, I just caught fire, but then I thought that this was extra weight and decided that I didn’t need it)
editor works masterpiece 🔥
That's what I call a high quality content 🤩
Thank you 😁
I need to know the magnets and the screws etc so I can get the stuff for it cuz I would love to have those
Def looking for K1 Max update
If the video gets well attention, I will definitely make it:)
Can you please detail the firmware tweaks you made for the 5015 fans for the heated chamber part? I'm assuming you rooted the printer and made a config change to enable the spare pin on the mainboard?
Wow...beautiful presentation. Thanks for your job. You are an great actor... Say hello to Brazilians 3D makers.
Wow, thank you!
Bonus points for using dill!
you are very good at your job. and very funny. please do more videos
thank you for your feedback, will do! 😇
Q cámara usas para grabar. excelente video
El cfg para el uso de los ventiladores lo compartes por favor.! Que gran vídeo.! Saludos desde Madrid
I Will be wating the video on the k1 max
Did you print in PLA or PETG? tks for the video. I will watch again very slowly to be able to do all. I love the effects. tks so much to make fun to watch
Same question here
Maybe abs for the heat
I sub because of the editing
Please make more potential upgrades part two for the k1+k1c like filters, dual camera, LED
Thank you for your feedback
awesome
Thank you!!!
Excellent video, and thank you for giving me credit for my duct! You should have picked up my feet for the k1 too, those stock ones are garbage.
Thank you for the design, maybe in part 2:)
You, sir, are a madman. I mean that in a good way.
Thank you!
Brat chotki, Printerni ham redline qilib tashladiz😂 gap yo, omad 👍
Nice I don’t know what it is better the Pinter improve or the video 😂😂
good job 😊 i think that lot of us buy k1/max in order to print with closed chamber. so infrared heater or active chamber heater upgrade should be the best. thx
That's a great idea! Thank you!
Hi, for the KNOMI V2 is it just purchase for the screen only? No need to choose those with board, right?
What material was used for all the prints??
hi, i bought a K1 about a week ago and saw your video. I'm trying to print the N-UK Riser but the sides exceeds my print value be it on the sides or from down to up. How did you manage to print those with the K1 ? Thanks
Which slicer did you use? I’m looking for good slicer preferably with LAN printing.
Это очень крутые доработки👍👍👍 Подскажи пожалуйста, мой К1 печатает окружности эллипсом, ремни натянуты одинаково. У тебя была такая проблема?
Чувак за монтаж 12 из 10 )))) апгрейды тоже все крутые
Looking into getting the K1 Max as my 3rd printer. Are these upgrades compatible with it or have equivalents that work with the Max?
Some of them are compatible, like active bed heating, auxiliary blast, side fan cover,270 degree door hinge and so on
nice 🎉
I can't wait to it comes out creality k2 max
wow, k2 max already?
Whats that spray he keeps usin?
please make the 2 part
Do a K1 Max version please 🙏
Can i scale this print to fit my K1 MAX?
If you are going to swap out the heater block, I'd go one step further and go to the Flowtech from Micro Swiss. I've been happy with it on my K1 Max.
Oh yeah, that was little expensive for my budget, but that is game changer upgrade!
thank you for you feedback!
Me: watching the video, trying to understand, which wires to cut
The editor: nah, bro, not a chance
Une très belle vidéo . Mais je pense un truc : elle a finalement imprimée toutes les pièces qui lui fallait , donc elle marche bien . En plus il dois avoir fait pas mon de 50h de print juste pour l’améliorer ? J’ai la k1 max avec le nouvel extruder . Je n’ai amélioré que le dessus pour l’aération . La nouvelle buse arrive bientôt . Mais après 100 h toujours pas de soucis à part le bouchage que j’ai eut ( pla normal a grande vitesse et la chaleur qui est remonter trop haut .)
Монтажёр от бога, просто великолепно👏
Thank you!
Make a video with k1 max upgrades
USB dust cover? cover above LCD for holding in temp?
Yeah, I had those upgrades in my, but the video was getting so long:(
@@engineericly Love the editing man. Couldn't stop watching!
@@switchbladeaa Thank you!
are these available for k1 max?
1 Blink = 2 Hours of editing :D
Amazing job, I want one video like this per month :p
if it's possible for you, please consider K1C, K1Max or K2 Plus (350mm Cubed). Thank you.
What kind of plastic are the parts printed on? PLA?
I have used PETG/PLA/ABS depending on the part, but I would suggest using only ABS as most of the parts should be high heat resistant
Do the K1 max
Definitely need a way to synchronize the rotation of all radiation signs and it should also help with their fixation. It hurts to look at it.
Please!!!! update for the K1 Max!!! please!!!
yes please k1 max
Thank you for your feedback,
I hope this video gets more views, so this will inspire me to make K1 max version as well:)
🔥🔥🔥🔥🔥
Thank you:)
Would you upgrade ender3 ?
Yeah, I have done it, it is the most cheapest printer that you can upgrade
I need all this for k1 max😮😮😮😮😮
Hope, I will make them soon 🙃