My first rig is mixed.. I actually like my AMD's better ... They seem more stable... I have a 6600xt and 2x rx580 running along side a 3070, 2060 super , 2x 1660 super. I want to add my 5600 xt but I had no luck with my Z390UD mobo. Tried splitter but only recognizes 2 cards max , tried M.2 slot with adapter no luck either. I would love if community any feedback ? Any ideas? Basically I am stuck at 7gpus. Great vid again hobbyist miner
Why don’t you use a molex connector from the ATX psi to the breakout board on HP PSU. You only need to push one button…all my rigs work well doing this
When I seen the price options for fans I was thinking they were going to be $26 each. They average around $10 each. That's really reasonable for such nice looking fans with leds that perform well. I'll be getting the 10 pack so I have extra. Comes to about $9 then with your discount, just a little over $8 each. Love the white.
6:56 👍🎉❤ I am glad you like those cards! I have the same motherboard in my test bench its decent no issues yet. I little birdie told me you might be getting an HNT hotspot :D
It's ridicilious how much free stuff all youtubers are getting from the manufacturers. I wonder how much money they're making from us so they are able to send these free stuff. I have hundreds of gpus, fans, risers, splitters, tens of motherboards, psus, cpus, rams, ssds and none of them were gifted to me. Maybe I should have started a channel years ago instead of expanding my farm little by little. I would probably have the same hashrate paying half the price, maybe less.
I have free electricity and was thinking about GPU mining. My plan was to buy RX 6600 each month and build 6 GPU ring. Should I go with that plan or just ball out and buy ASIC for the same cost as this 6 GPU setup would cost me?
Yea my 3070ti cant get over 24 mh on eth even with the unlockers idk what im doing wrong but i aint got time to play around … so 3070ti 4x570s (1-8gb 3-4gb) and 6600xt all on ergo (8gb 570 gets like 60%+ stale shares on eth) so ergo makes the most sense to me
Nice, I'm selling off my old 580's for 1660ti/1070ti/1080 FLUX rig build Any updated on your FLUX rig going down randomly and not connecting in HiveOS? Did MOBO swap work? I'm having this same issue where miner just stops but my rig still stay connected in HiveOS so still testing... Thanks for all your content and FLUX overclocking xlsx!!!
Hi Hobbyist Miner, do you know the answer to this: I don't understand in HiveOS... right now I have to keep editing the one and only Flight Sheet to try ETH, DOGE, SHIB... can I create 3 Flight Sheets and then enable 1 and disable the other 2? It is so tiring to keep on editing the single Flight Sheet...
Hi. Whats the problem if my second rig does not show up in hiveos on solo mining. Is there actually but no reported hasrate, only current hasrate. I left like that for 3h but nothing,new flysheet, nothing still same. Any ideas.? Thx.
sick fans and i wish gpurisers would send me some free risers im out again lol also 1 of the 6 i got last time the red led would not turn on so wouldnt work. love those hellhounds also i have a wood 20card rig im building, trying to put the top rack all hellhounds and i have several red devils on bottom, going for the red/blue led look. i would really like 1 of those mobo also, so nice but not keen on ordering anything from china F that
Are you mining with any AMD GPUs? IF so what does your setup look like?
6600 xts so far i have
2 3060ti lhr at 86 mh/s
i had the same issue as you i simply connected the HDMI cable to one of my graphics instead of Motherboard and problem fixed !!
I did that, i even adjusted in the Bios to use IEG.
My first rig is mixed.. I actually like my AMD's better ... They seem more stable...
I have a 6600xt and 2x rx580 running along side a 3070, 2060 super , 2x 1660 super. I want to add my 5600 xt but I had no luck with my Z390UD mobo.
Tried splitter but only recognizes 2 cards max , tried M.2 slot with adapter no luck either.
I would love if community any feedback ? Any ideas? Basically I am stuck at 7gpus.
Great vid again hobbyist miner
Thank you for what you do. I have been able to advance on "The Plan" because of you and you transparency
Why don’t you use a molex connector from the ATX psi to the breakout board on HP PSU. You only need to push one button…all my rigs work well doing this
When I seen the price options for fans I was thinking they were going to be $26 each. They average around $10 each. That's really reasonable for such nice looking fans with leds that perform well. I'll be getting the 10 pack so I have extra. Comes to about $9 then with your discount, just a little over $8 each. Love the white.
Can you make a video on how to configure the rig to mine multiple coins? The specific arguments for the config file
thanks for the gpuriser coupon code, i ordered, it helped
Nice. Didnt know gpurisers made fans
New Product
6:56 👍🎉❤ I am glad you like those cards! I have the same motherboard in my test bench its decent no issues yet. I little birdie told me you might be getting an HNT hotspot :D
Maybe ...
Congratulations, I always like your manipulation s and ideas . A BIG thanks for yours shares from Belgium.
The fans look slick.
It's ridicilious how much free stuff all youtubers are getting from the manufacturers. I wonder how much money they're making from us so they are able to send these free stuff. I have hundreds of gpus, fans, risers, splitters, tens of motherboards, psus, cpus, rams, ssds and none of them were gifted to me. Maybe I should have started a channel years ago instead of expanding my farm little by little. I would probably have the same hashrate paying half the price, maybe less.
Never to late to get started!
@@TheHobbyistMiner I guess you're right..
I turned off the fans for my 6600 rig. Only have 3 GPUs so far, but they're blowing cold air out.
Try plugging into 16x PCI slot graphics card into HDMI port and you won't get black screen, don't plug the card directly but through riser and try it.
Any reason you use 2 power supply's on so many rigs? Or is cheaper to put 2 smaller than a bigger one, ie a 1200W PSU?
Cheaper and what I had.
Awesome my man!! East in house!!
Appreciate it!!
Now that’s what you call efficiency
Been watching LTT lately I see lol sick fans definitely gonna pick up some
Thank you friend
I enjoyed this video very much. ♥♥ ♥♥ 5:21
so can you state how many Mhash do you get... the how much to build the rig...
I have free electricity and was thinking about GPU mining. My plan was to buy RX 6600 each month and build 6 GPU ring. Should I go with that plan or just ball out and buy ASIC for the same cost as this 6 GPU setup would cost me?
Gpus will have better resale value but be aware of the time when eth goes POS so you have enough time to breakeven and make some profit
Yea my 3070ti cant get over 24 mh on eth even with the unlockers idk what im doing wrong but i aint got time to play around … so 3070ti 4x570s (1-8gb 3-4gb) and 6600xt all on ergo (8gb 570 gets like 60%+ stale shares on eth) so ergo makes the most sense to me
Nice, I'm selling off my old 580's for 1660ti/1070ti/1080 FLUX rig build
Any updated on your FLUX rig going down randomly and not connecting in HiveOS? Did MOBO swap work?
I'm having this same issue where miner just stops but my rig still stay connected in HiveOS so still testing...
Thanks for all your content and FLUX overclocking xlsx!!!
HIVEOS had an outage all day yesterday and last night. Where the Website was not accurate to what was going on. Check their Twitter.
Ya those fans look nice. I agree tho, mining don't need to be pretty :)
Hi Hobbyist Miner, do you know the answer to this: I don't understand in HiveOS... right now I have to keep editing the one and only Flight Sheet to try ETH, DOGE, SHIB... can I create 3 Flight Sheets and then enable 1 and disable the other 2? It is so tiring to keep on editing the single Flight Sheet...
Hi. Whats the problem if my second rig does not show up in hiveos on solo mining. Is there actually but no reported hasrate, only current hasrate. I left like that for 3h but nothing,new flysheet, nothing still same. Any ideas.? Thx.
Bro is there any coding knowledge is required for mining
Nope
We don’t buy things because they look good we buy them cause they work well..........cap
sick fans and i wish gpurisers would send me some free risers im out again lol also 1 of the 6 i got last time the red led would not turn on so wouldnt work. love those hellhounds also i have a wood 20card rig im building, trying to put the top rack all hellhounds and i have several red devils on bottom, going for the red/blue led look. i would really like 1 of those mobo also, so nice but not keen on ordering anything from china F that
Hi can amd ryzen 3500 support 5-6 gpus?
Hey I have a p 104 u can have, that doesn't work anymore you can have... let me know and I will ship it to you.
And I do have some amd builds. 8x 470 8gb, 3x vega 56. And 4x p104 2x1080tis plus I've got 5x 570s 4gb.
Thank you. Can you DM on discord or email me? Info in the video description. I can send you my PO Box
Nice setup
38CFM is pretty poor, look at noctua industrial fans.
Your rig mac address is visible on the hive page man. Not secure :/
Having my MAC address doesn't provide any insecurity. It is not public facing or provide information that can disclose my location or external ip.
cfm is low, these fans should be $30 for 5. if its higher then they op
AMD mining rig with NO AMD board thanks.
Can you mine ergo with 4gb cards?
Yep
@@TheHobbyistMiner i was looking at some 4gb cards but price wise mind as well get the 8gb. Im sure you got your 4gbs at a good price
first :)