I've got this but the large can 2500kv 10p in my sherpa build. Tested it in a parts truck and man it is impressive all that tourqe with none of the noise.
I have been running one with a 1000kv Snubnose in a 2.2 Sportsman build for the last few weeks and absolutely love it. I will definitely be picking up another for one of my scale rigs.
I love both my revolver 2500kv motors. Recently bought the regular and snubnose 2500kv. Kinda like the revolver motor sounds but it does get annoying from time to time. May have to grab 1 of theses ESCs up. Love the channel. Always the best reviews here.
@@HerederoDj Oh, really !!!! 😲....... - WAY COOL BRO !! - Thankyou !!! 👌 I was always wondering how different the HELI MOTORS & ESC's would be, and (IF) both of them could be used in a proper functional way....... - I am goin' straight to your video after Exo's video here !! 😁 - You rock bro !!!! 🤘👍 😀 Thx again
The rotor is always the spinning part of a motor. On an out drive motor it's the bell on an in drive motor it's the inner part. The stator is always the part that stands still no matter where in the motor it is
Looks like it performs great. Would it be possible to do a comparison between this combo and the Axe 2300kv 540 sometime if you still have one? Hope you're having a good day
Watching you with sv2 and optimus 3 really makes me wanna build a crawler from scratch. Only problem is I’ve never built one. I’m confident in my wrenching abilities I’m just not sure what I’d need to order do you have any links to your optimus build or sv2 build either one.
@@ExocagedRC okay thx. I checked the Optimus build kit out on the website you had the links for on Optimus 3 but wasn't sure what I needed to order but I'll check again and see if I can figure it out.
If its cogging you have an issue somewhere. Could be to tall of gearing too. The 10 pole isnt quite as smooth as a 14 either. But being 2500kv you can gear it way down to get a good crawl speed plus killer low speed control. A 14 pole 2500kv revolver and the sw4 is what I use in a few rigs and they are as smooth as butter.
In terms of value a lot of folks are running the Hobbywing Fusion as it’s only $150. This combo will fall into the same price range which is great. My guess is a lot of folks going brushless will go this Crawlmaster Mini route so long as Holmes keeps pricing where it is
Muy buenos tus videos !! Podrias decirme que mejoras tiene llevar llantas de carbono ? Nosotros le ponemos peso para ganar estabilidad y veo que vosotros se lo quitais ,!! Gracias . Saludos
Yeah you might get it to work with the capra they are geared to high 10t pinion maybe under drive the rear diff or portals to achieve over drive in the front wheels instead of the otherwise around.
I got them carbon fiber chassis from hotyoyo on ebay and they were fiberglass and snapped right away...has that happened to anyone else? Or is it super weak carbon fiber? I was refunded right away so no harm done but I want to do a super light build ...any other affordable carbon chassis rails ?!
You broke yours? Man I’ve got these two and they’ve been awesome. Did you get the ones from my links? Those are the very ones I order for my own builds.
@@ExocagedRC I did not use the link, I bought them on ebay a while ago, however after clicking on your link it turns out it's the same ebay seller lol like everything online sometimes its hit or miss...I will try again but on Amazon this time!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Beautiful Build & Drive! Holmes is The Best in the Crawler Rc industry!
Haha yeah they are if you let Joe tell it lol…
lol I like things
Man after driving the course on Memorial day I have a new respect for how easy you make it look, Especially for driving one handed and filming 😅
thanks!
I've got this but the large can 2500kv 10p in my sherpa build. Tested it in a parts truck and man it is impressive all that tourqe with none of the noise.
Is the Sherpa different from the Expert/Sport? Or is it basically the same chassis?
I have been running one with a 1000kv Snubnose in a 2.2 Sportsman build for the last few weeks and absolutely love it. I will definitely be picking up another for one of my scale rigs.
Excellent performance Joe.
Wow those motors have gotten so much better since I first saw the outboard design. That build just got so much better!
I'm such a nerd for rc electronics bro this is awesome! 👍👍🤨✌️🤙
You and me both!
I like how quite it is now plus how light weight it is
That sounds much better now!
What!!! No way that's got some speed. Pretty cool.
I love both my revolver 2500kv motors. Recently bought the regular and snubnose 2500kv. Kinda like the revolver motor sounds but it does get annoying from time to time. May have to grab 1 of theses ESCs up. Love the channel. Always the best reviews here.
What a difference!!!
Cliffhanger had me smiling when that tire slipped out
Great crawl, Can't wait to get one of these esc's.
Lol, good call on the BEC, given his statement on it.
I run the same style esc and motor on my 3lb combat robot. They work great
Right on Joe great vid cant wait to pick 1 of these up
It looks like a quad / rcplane esc ive been using for years.
in my channel I explain how to adapt an esc blheli 32 in crawler
@@HerederoDj Oh, really !!!! 😲.......
- WAY COOL BRO !! - Thankyou !!! 👌
I was always wondering how different the HELI MOTORS & ESC's would be, and (IF) both of them could be used in a proper functional way....... - I am goin' straight to your video after Exo's video here !! 😁
- You rock bro !!!! 🤘👍 😀 Thx again
@@HerederoDj I CANNOT FIND YOUR VIDEO ON ADAPTING (A HELI ESC TO A CRAWLER ESC) !!???? Please HELP, Thankyou !!!
ruclips.net/video/jHjvxbYNvcY/видео.html
The rotor is always the spinning part of a motor. On an out drive motor it's the bell on an in drive motor it's the inner part. The stator is always the part that stands still no matter where in the motor it is
I'm going to wait until they become programmable before I get one
I have a homes hobby 35T torque master hand wound and I have beat the hell out of it for a 7 year old motor and still running strong
It's crazy just how small the esc really needs to be to work
Looks like it performs great.
Would it be possible to do a comparison between this combo and the Axe 2300kv 540 sometime if you still have one?
Hope you're having a good day
I only have one 2300 and its in a capra. would be a pain to get done
@@ExocagedRC With your experience of using both, how would you say they compare to each other in terms of start up smoothness, torque and punch?
That is a nice and small esc
That's crazy that this little thing handles 4s. What did you use and how much does it weigh now?
Yeah just 3S and the weight is the same as before. About 3lbs 10oz
Watching you with sv2 and optimus 3 really makes me wanna build a crawler from scratch. Only problem is I’ve never built one. I’m confident in my wrenching abilities I’m just not sure what I’d need to order do you have any links to your optimus build or sv2 build either one.
hey buddy, in the descriptions I have links for various parts and pieces on any truck shown.
@@ExocagedRC okay thx. I checked the Optimus build kit out on the website you had the links for on Optimus 3 but wasn't sure what I needed to order but I'll check again and see if I can figure it out.
What gearing does the truck have?
Where is this park?
sweet
Wow! Yours is very smooth. Same system and mine cogs initially.
If its cogging you have an issue somewhere. Could be to tall of gearing too. The 10 pole isnt quite as smooth as a 14 either. But being 2500kv you can gear it way down to get a good crawl speed plus killer low speed control. A 14 pole 2500kv revolver and the sw4 is what I use in a few rigs and they are as smooth as butter.
@@rc-daily Thanks! I will gear down to help eliminate the rough start ups. I need butter smooth like my Fusion.
In terms of value a lot of folks are running the Hobbywing Fusion as it’s only $150. This combo will fall into the same price range which is great. My guess is a lot of folks going brushless will go this Crawlmaster Mini route so long as Holmes keeps pricing where it is
@@jonthomas8487 The fusion is also waterproof which is a deciding factor for me and most people I crawl with.
@@vector292 true and my axe 550 is as well, but I stay out of the wet and mud so I’d be fine
Forgive me for asking but, what carbon fiber chassis are you using ?
This one amzn.to/3yYivub
Muy buenos tus videos !!
Podrias decirme que mejoras tiene llevar llantas de carbono ? Nosotros le ponemos peso para ganar estabilidad y veo que vosotros se lo quitais ,!! Gracias . Saludos
Where's the manual? Can't figure out how to calibrate throttle on my Flysky radio and beyond frustrated.
That rx tx and ground is how to connect...if you know you know.
I put a heat sink on mine it works
Nice esc outta stock as always maybe in stock by thanksgiving….
He said 3 weeks a week ago so keep checking in. He said he was soldering them up a week ago.
LATE this morning huh? 😁
lol yep
question! what's the bumper you're using on that rig? Please don't say IE_RC! 😆
Punks Custom 3d Makes that one, All Carbon and light
@@ExocagedRC cheers
I have a problem I'm trying to hook up my 2500 KV homes revolver rdr2 my copper 10 head ESC and I get everything but throttle
where can I find one? ANYBODY KNOW?
links in description
Sold out what I’m saying
Nah castle esc and regular 14 poles for me let him workout all the kinks 1st good vid though mr Exo✊🏽👊🏽
Top Sv2 off with some aluminum 357 shell casings in ur beadlocks or 45s 😂🤣 just a thought luv sv2 mr Exo ✊🏽
lol chances are YT would recognize the 357 casings... lol
😂🤣 I 4got damn YT✊🏽
Had this same combo in my capra and it kept over heating and shutting down
Capras are known for fast gearing, you’ll need a 3gear to make it work in there.
@@ExocagedRC so like scx10.3 and that dig?
Yeah you might get it to work with the capra they are geared to high 10t pinion maybe under drive the rear diff or portals to achieve over drive in the front wheels instead of the otherwise around.
Yes it is lol
👍🏾👍🏾👍🏾
You can actually got up to 2200kv with a 14 pole 1400kv is the 4s cut off for now
Thank you Jesus, someone finally shut up those damn revolvers.
I got them carbon fiber chassis from hotyoyo on ebay and they were fiberglass and snapped right away...has that happened to anyone else?
Or is it super weak carbon fiber?
I was refunded right away so no harm done but I want to do a super light build ...any other affordable carbon chassis rails ?!
You broke yours? Man I’ve got these two and they’ve been awesome. Did you get the ones from my links? Those are the very ones I order for my own builds.
@@ExocagedRC I did not use the link, I bought them on ebay a while ago, however after clicking on your link it turns out it's the same ebay seller lol like everything online sometimes its hit or miss...I will try again but on Amazon this time!
i like the noise of my revolver plus it pisses of my friends
- Wow bro....!!! 😆👌I get a headache when I watch & hear those outrunner motors !! 😖😵😩.......arrrghhh !! 😆
...Triggered
.... weight comparison...? lol. Looks lighter.
should be the same weight
It sounds like a Hoover vacuum cleaner on folks rottle
Full throttle
I solder like a chimp. Not for me.