Hi, is the tempered glass panel and the mesh panel interchangeable? I think that having the mesh on the other side will help with airflow and lower the temp by quite a bit. Thanks!
not interchangeable as there's tabs on the mesh panel. Also I could be wrong but wouldn't there be heat build up on the back side of the CPU and MB now that is up against the glass?
I want build a small custom warercooling only for the cpu . Can i fit a 280mm radiator on the top with slim fans and a small reservoir ? I will use sfx psu and no hdds, but a long graphic card xfx 7900xtx 343mm
@@city17workshop can consider Antec M-ATX Case RGB Elite CX200M but more for aircool for top mounted aio Jonsbo D301 MATX a little bigger but got room for 360 aio
Would this work with an 240 AIO of 38mm thickness and 52mm height RAM? In your video it looks like if the RAM doesn't interfere at all with the fan but I may be mistaken.
Did they send the AIO to you or is it included in the purchase??? Also the other three fans i saw are they included with the original purchase or is it bought separately?
should fit but you are taking more room vertically which can affect your AIO and GPU selections. If you can swing it, better to just go for the SFX, give you more room
I saw that before you put the mainboard in, you had some screws (one black and one with an elongated tail), I don't know what use it is, and after I finished installing the case, there were quite a few left over. There are so many snails that I don't know if it has any effect I hope you will answer me
those are use to secure the motherboard on to the case. It's not that big of an issue as long as your mother is secured and not wobbly about in the case
I really enjoyed your review on this case as it does not have much content on it. You've earned a subscriber by far. By the way, which sides did you use for intake and which sides for exhaust?
should be no issue. lengthwise the case can support up to 363mm. Just be mindful of your PSU size and placement. Also have a think about how it would affect your bottom case fans if you decide to run those
i have seen this case and want to get it , but i have a question , it says u can use a 240 AIO or 2 140 fans , so i want to ask what if i mount the psu horizontally , can i be able to force in a 280 AIO (lian li galhad lcd 280 AIO)... pls help
@@projectsgaming2020 okay and thanks , well if u happen to get a 280 AIO, kindly give it a try and update us , because just like u said , seeing the spacing on the AIO mounting bracket , i do think maybe the can be a way to fit a 280 AIO with the space at the top and lower the psu , well in all i guess i have to take the risk and buy the case and try it out , i like the handle alot that is 1 of my points for buying this , easy to carry and also can mount a top AIO , thanks for the reply and keep the good work ,
can fit 150mm (W) x 86mm (H) x 140mm (D) standard ATX psu if you are running a 240 AIO setup with standard atx psu you might need to run the hose towards the MB io side or push the PSU to a p3 or p4 slot but that will also be dependent on the length of your GPU
@@projectsgaming2020Awesome to hear ! thanks for reply i already got psu and ordered case but realised psu is 1000w chunky one. im going air cooler no issue there
This case is nice but it really needs to have a mesh side panel option.
I'll update u if they do decide to have a mesh panel
There is something pretty close, the ShinySnake G400, shame about availability.
@@neykovsnIs shinysnake worth it, it costs only 300¥ on taobao
Underrated comment
nice case too bad its not available in my country :')
Can I use a v850 instead of a v750 fan?
short answer is yes but you'll have an easier time with something the size of v750 when it comes to installing and compatibility with other parts
@@projectsgaming2020 oh okay Ty I was wondering because I couldn’t find a v750
Great video, I especially liked how you explained the tips and issues at the end. Very useful review
I'm really tired of Tempered Glass panels. It's heavy and just make it hot inside.
I wish i could get this case, but no local sellers and shipping is over $100, more than the case. lol
Anyone know the height of the case with no carry handle but with the feet
Have the exact question 😅
Good build bro 👍► i build my PC in same case, look my build 👀
HD Audio plug being a pain to install >_
man this case should be compared with terra.
Thanks for the guide on how to install everything
Thank you so much 👍
Paid over 100 yesterday for this case now
Looks like enough space for an 280 radiator if you switch the air hoes, istn´t it?
If you drop the PSU to the lowest setting, run the waterhose on the left side, get a smaller fan on the left, it could work
Going to by this case and modify it to fit a 280mm radiator it looks nice wish it wasnt out of stock everywhere lol
In US, retail price is 95~105 USD before tax. 😪
ahh probably from the additional shipping cost
Does it come with fans??? Or do I have to buy them separately?
No fans. have to buy separately
Hi, is the tempered glass panel and the mesh panel interchangeable? I think that having the mesh on the other side will help with airflow and lower the temp by quite a bit. Thanks!
not interchangeable as there's tabs on the mesh panel. Also I could be wrong but wouldn't there be heat build up on the back side of the CPU and MB now that is up against the glass?
Hi man do CX550m PSU fit this case?
It should fit but that also depends on your other hardware. Jonsbo recommends
Is there anyway i can get this in the netherlands for under 80 euros?
unfortunately I don't have that info. Your best bet is contacting Jonsbo directly
11:19 one of the fans is pulling and the other is pushing??
Good eye. I didn't think anyone would catch it. We incorrectly installed it while filming. The fix was done off camera
Please do remove the music or decrease the volume by 90%
Nice tutorial btw
I want build a small custom warercooling only for the cpu . Can i fit a 280mm radiator on the top with slim fans and a small reservoir ?
I will use sfx psu and no hdds, but a long graphic card xfx 7900xtx 343mm
Excellent build guide and case review. A lot of the screws seem proprietary though in case you lose one so that's a bit worrisome.
they included extras but its a real concern if u lose the extras
@@projectsgaming2020 can you possibly ask them to send you screws just in case you lose them?
@@jerbjerbjerb5912 depends on if the seller you purchase from has a good rapport with them but not sure if the cost+shipping would be worth doing
what are the packaging dimensions? Thanks
Bro I want to know that if I use sfx psu at P4 level can I use 280mm or 360mm AIO on top ?
280 is the biggest. I can't confirm this as we no longer have the case
www.jonsbo.com/Upfiles/down/Z20%20Installation%20Manual.pdf
@@projectsgaming2020 thank you :)
Can you recommend me some good white itx or matx cases with top mount aio
@@city17workshop can consider
Antec M-ATX Case RGB Elite CX200M but more for aircool
for top mounted aio Jonsbo D301 MATX
a little bigger but got room for 360 aio
@@projectsgaming2020 thx sir
Great Video, you guys have come so far! Good Content
Where did you buy the casE? cant find it anywhere
where you based?
Austria @@projectsgaming2020
Would this work with an 240 AIO of 38mm thickness and 52mm height RAM? In your video it looks like if the RAM doesn't interfere at all with the fan but I may be mistaken.
sorry mate. don't have the case anymore to test your parameters.
Can I have one
Did they send the AIO to you or is it included in the purchase??? Also the other three fans i saw are they included with the original purchase or is it bought separately?
The case is just the case. No fans or AIO included
Does psu with dimensions 160mm(L) x 150mm(W) x 86mm(H) fit in this case?
should fit but you are taking more room vertically which can affect your AIO and GPU selections. If you can swing it, better to just go for the SFX, give you more room
I saw that before you put the mainboard in, you had some screws (one black and one with an elongated tail), I don't know what use it is, and after I finished installing the case, there were quite a few left over. There are so many snails that I don't know if it has any effect
I hope you will answer me
those are use to secure the motherboard on to the case. It's not that big of an issue as long as your mother is secured and not wobbly about in the case
I really enjoyed your review on this case as it does not have much content on it. You've earned a subscriber by far. By the way, which sides did you use for intake and which sides for exhaust?
Thanks. Bottom two are intake
Top 3 are exhaust (the fans above the GPU)
If you're going to keep the case at the same distance form the camera ll the time, disable your auto focus and set it manually
noted we try that out for the next one
Great small powerhouse portable case.
thanks for this great video. idk where you got it for 60 bucks i just spent 100 on it
Hong Kong. no tax
It look beautiful but not available in id 😢
Is there enough clearance at the bottom for 140mm fans without hitting the mobo's internal front panel I/O connectors?
There's room but it's going to be extremely tight. Why not just run 120mm. I don't think 140mm will drastically perform better than 120mm.
저거 구매욕구가 안나오는 이유 : 푸쉬핀 부재
Compatible with MSI mag zero project or Asus BTF??
nope
Please do the Jonsbo TK 3, that thing is damn beautiful
how the hell do you use to screw the bracket to the base of the case? What type? Thanks all
are you referring to the GPU support bracket or the the SSD bracket?
Why they always put Glass on portable sff rigs.
They don't on the V11.
can a noctua 4080 super fit in that case?
should be no issue. lengthwise the case can support up to 363mm. Just be mindful of your PSU size and placement. Also have a think about how it would affect your bottom case fans if you decide to run those
Needs full mesh
i have seen this case and want to get it , but i have a question , it says u can use a 240 AIO or 2 140 fans , so i want to ask what if i mount the psu horizontally , can i be able to force in a 280 AIO (lian li galhad lcd 280 AIO)... pls help
I don't have a 280 AIO to test this out, but just looking at the spacing with our 240 AIO, I don't think its doable
@@projectsgaming2020 okay and thanks , well if u happen to get a 280 AIO, kindly give it a try and update us , because just like u said , seeing the spacing on the AIO mounting bracket , i do think maybe the can be a way to fit a 280 AIO with the space at the top and lower the psu , well in all i guess i have to take the risk and buy the case and try it out , i like the handle alot that is 1 of my points for buying this , easy to carry and also can mount a top AIO , thanks for the reply and keep the good work ,
Does anyone know when it will be available in EU ?
They mentioned they were working with regional distributers on this. No timeline
Thanks for the insight!
does it fit 150mm wide atx psu ? it only specifies lenght but not width
can fit 150mm (W) x 86mm (H) x 140mm (D) standard ATX psu
if you are running a 240 AIO setup with standard atx psu you might need to run the hose towards the MB io side
or push the PSU to a p3 or p4 slot but that will also be dependent on the length of your GPU
@@projectsgaming2020Awesome to hear ! thanks for reply i already got psu and ordered case but realised psu is 1000w chunky one. im going air cooler no issue there
i like your channel bro !!
thanks bro. its been a while. one of the early supporter of Projects Gaming
Can it fit 4080 super noctua?
should fit. just need to aware of your PSU and bottom case fans
Does the handle cut into your hand when carried?
if you carrying it for a long period than ya, if its a short trip than manageable. A circular handle would be more comfortable