hey, guys how is the paint match from the spray can? and did your breaks noise mine squike when I slow down from slow speeds like in a drive throw its embarrassing but I did not use the hawk pads debating on getting them if their quit. awesome vid like always.
Strong work hooking up with ecs, I know for a fact that they are very picky about the people they put their name to so the fact that you have been given it is a huge insight into what on of the top names in aftermarket bmw thinks of your potential in this area. Strong work indeed
If i can explain why for you. When your master cylinder is in the full rest postion it allows the break fluid from the reservoir to flow into the cylinder. So when your pads ware down it keeps the fluid in the lines full.
Why don't you guys buy fcp euro? I just got a waterpump and thermostat from them and not only did they have the most competitive pricing but they also offer lifetime replacement warranties on pretty much everything including rotors and pads.
Just an FYI, you installed the rotors backwards, those are directional rotors. You installed the driver’s side rotors on the passenger side, vice versa. Informational content nonetheless
Did you clean the rotors with brake parts cleaner before installing? They have an anti-corrosion film on them so they stay shiny in storage and transit that has to be removed prior to use or it will typically squeal or gum up the pads
Hey Dudes, Can I ask how you have liked this brake set-up over the last year? A local tuning company has also talked me into these rotors. I am just on the Fence about the Hawk 5.0 pads. Would love to hear your thoughts on them. Thanks
@Budget Bimmers I have a 335D which I think has the "same brakes". I'm with stock discs/pads and after few times with heavy breaking my discs are constantly warping/twisting. Do you have any similar problem? NOTE: I have a friend with same car but with performance discs/pads and they warped too after few times.
you didnt secure the rotors correctly... Those 2 (or 1 depending what came with car) phillips head bolts (set screws) are meant to be installed with an impact screw driver. An impact gun will not correctly tq down the bolt but in fact stretch the threads.
I have textar brake pads for my 335i with textar rotors, but I do want new brake calipers. Would any brake caliper I order online be compatible with my brake pads??
I hate how easy the set screw came off for you. I had to buy drill it out. I used 2 different drills and ended up buying 3 different, pricey drill bits.
I had issues of drilled rotors cracking on road course. So i switched to slotted only and a EBC blue pad. Best set up i ever had and i went trough 5-6 different pads before.
Hey guys, we got shirts! Check them out here:
www.teespring.com/stores/budget-bimmers
Budget Bimmers 😂😂😂😭😭😭😭😭
hey, guys how is the paint match from the spray can? and did your breaks noise mine squike when I slow down from slow speeds like in a drive throw its embarrassing but I did not use the hawk pads debating on getting them if their quit. awesome vid like always.
Damn that brake trick is one for the books. Also dope ass fridge commercial.
"these are like Mustang 5.0. This will slow you down fast "...........🤣😭
Boys and their entertainment, best channel on RUclips, even made a JDM guy watch your videos...
Strong work hooking up with ecs, I know for a fact that they are very picky about the people they put their name to so the fact that you have been given it is a huge insight into what on of the top names in aftermarket bmw thinks of your potential in this area. Strong work indeed
Glad to hear about ECS! I love your channel and do a fair bit of purchases from ECS. I'm happy to kick back some money to you guys!
Just bought 6 fridges, great video!
You guys are funny as hell love watching you guys goof off makes these videos a lot more fun to match if you ask me
Always CLEAN the HUBS, before installing new discs
nice tip on the brake lines not bleeding out
24:32
I love how hes ready to explain everything
this 335i is not budget tho, super legit build... where is the budget bimmers? lol
why can't a legit build be on a budget?
with over 7k on upgrades alone? doubt
Lucas Sobrinho the budget part is them doing the installs themselves btw
Lucas Sobrinho they are putting down 700 hp with 7k in mods, are you kidding me lol. The budget is right there
Bruh this is way more than 7k
Yo, definitely supporting you guys on ECS. Been watching since the beginning and love the content.
“Hack street 5.0 pads,that’s that’s like mustang 5.0, you know what I am saying... slow, these are gonna slow you down fast.” Already made my day 😂😂😂💀
U guys offer labor. You guys def know what ur doing around a 335 n54. Love to chat more. Awesome channel
If i can explain why for you. When your master cylinder is in the full rest postion it allows the break fluid from the reservoir to flow into the cylinder. So when your pads ware down it keeps the fluid in the lines full.
Nappy ass weave!!! Shit had me cryin 😭😭😂😂🤣🤣🤣
Haha the fridge bit fucking killed me!
"You need to stop... at some point." Made me laugh.
perfect timing i was about to look for a DIY on how to replace brake rotors :)
11:40 ur the only guy I know to get dirt on his face doing a brake job lmao...good shit always
Bleeding the brakes using INPA the first time was crazy -- very cool function. Did you happen to use my DIY on that portion?
you guys so entertaining to watch
Big discount numbers coming out to the people! 5th off retail is practically trade discount
Awesome video boys, much love and support from Boston Mass. I got my brakes done about 1 month ago I went with same package.
LMAO, New Air skit was so good! All the parts!!
Where is the link for all the brake line upgrades you did?
Why don't you guys buy fcp euro? I just got a waterpump and thermostat from them and not only did they have the most competitive pricing but they also offer lifetime replacement warranties on pretty much everything including rotors and pads.
You should always clean the hubs, before installing new discs. You risk warping the discs.
Slow you down.. FAST! Damn, i love the content!
“All 4 breaks are bred....” 😂
You need to add some Bangs to the fridge! A BMW garage or mini fridge is not complete without BANG!
Just an FYI, you installed the rotors backwards, those are directional rotors. You installed the driver’s side rotors on the passenger side, vice versa. Informational content nonetheless
If you guys make it to California let’s get some runs in 🤘🏼
I love how the most replayed was the fart
Nice stuff. The Hawk pads are super, I kwow. You guys have an addiction, or 2 , or 3 ehh ;-)
Sick.
I love this video!! You guys are amazing. Keep at it!!!
I wonder how many people will install a sticker. Nice vid!
Hey lads just discovered your channel, this was a sick video! What model are those wheels and figment etc? Is the rear 255 and fronts 235?
Did you clean the rotors with brake parts cleaner before installing? They have an anti-corrosion film on them so they stay shiny in storage and transit that has to be removed prior to use or it will typically squeal or gum up the pads
Hey Dudes, Can I ask how you have liked this brake set-up over the last year? A local tuning company has also talked me into these rotors. I am just on the Fence about the Hawk 5.0 pads. Would love to hear your thoughts on them. Thanks
great video do you mind showing what to choose in inpa to bleed the breaks?
I'm in the goddam Matrix dude, I gassed off the same exact time
@Budget Bimmers I have a 335D which I think has the "same brakes". I'm with stock discs/pads and after few times with heavy breaking my discs are constantly warping/twisting.
Do you have any similar problem?
NOTE: I have a friend with same car but with performance discs/pads and they warped too after few times.
Wait, y'all shot a fukkin commercial in the middle of production, SICK
How do you guys like the blisten coilovers . They just released xi coils and I was thinking about making the switch . What top hats do you run.
Do you think the stock single piston is sufficient and a big brake kit like bmw performance or f30 calipers or Porsche arent required
Great content. Much appreciated
Hello nice videos!! One ask, wich model of quickjack is the right for the e92?
Always make sure to bread the breaks
How are the brakes? Thinking of getting some
SHOTS FIRED AT MUSTANG lol
Keep up the cool vids and good work guys, really dig waching the vids
2:21 apperance of the new red shorts.
the fridge is cooler than the bimmer!
We thought so too! Just don't tell them we said that...
So I just installed R1 pad and rotors on my E90 and I noticed the outboard pads dont have clips... is this something I should be concerned about???
Notorious Shizzane did u ever get an answer I’m wondering the same thing
Wait, there's a gun on top the fridge, SICK
you didnt secure the rotors correctly... Those 2 (or 1 depending what came with car) phillips head bolts (set screws) are meant to be installed with an impact screw driver. An impact gun will not correctly tq down the bolt but in fact stretch the threads.
What you guys use to paint the calibers
I have textar brake pads for my 335i with textar rotors, but I do want new brake calipers. Would any brake caliper I order online be compatible with my brake pads??
DBSTube7 yes definitely
Thanks for the reply man!
Anyone know if its even possible changing the hoses without breaking the lines??
How did these weigh compared to stock
savageee aff 😆😆 5.0 like a mustang will slooow you down😆😆😆🤣
awesome bro always happy
Non slotted and drilled rotors are actually better for the street.. more surface area.
Where’s the test drive n review bros ?
Budget Bimmers what size rims are on your car 19” or 20” ?
whats the program you are using on your pc??
You should wear a swim cap for your brake jobs, yo.
That car is getting a real monster💀💀💀🔞🔞
You guys make me laugh. What you doing keep on drinking. Dr. pepper Good work guys thanks on the brakes information
Bremspedal lösen!! Schnell Schnell
I'm confused? Bmw's have stud bolts is this a 335i thing or was there a conversion
It’s a conversion
why didnt you choose the performance genuine bmw brake kit ? the price is quite the same
🤣🤣😂😂😂😂😂😂😂 i fukn love you guys !!!
No homo !!!
0:37 lmao I’m dying
rofl, hahahhahaha
I love this channel. Thank you, I have to sell my 335i and this at least gave me a solid chuckle. lol
Jajajjaj muy buen video quedaron hermosos esos frenos!!!! Qué pasó con el serie 7?
Lol yall killing me bro ima get fridge just because yall was terrible lol
Best install videos going.. socket/wrench sizes plus funny cunts.. winning
My favorite channel ❤️❤️
I see you have billsteins, do they clunk already or still silent?
Quiet as the day i got em
why not take it for a test drive? ....the whole beer shelves are empty lmao
I hate how easy the set screw came off for you. I had to buy drill it out. I used 2 different drills and ended up buying 3 different, pricey drill bits.
budro i feel your pain, i had that issue on an e36 once. It wasn’t fun. An Impact gun is your friend though
Rad 👍😁
I thought the calipers could open from the side..
Hey whatever happened to the comment guy who always said "instructions not clear, got my dic stuck in the...."? Lol. Rad vid, cooler is doooope!!
Idk but we miss him
You need to STOP.... HAMMER TIME
126 can mini fridge and not one pair of gloves ehh? 😂
Need a glove sponsor
That fart🤣
Fukini nnuuiiiccceee !!!!! 👌🏾
I'm just confused how he has proper wheel studs and my 335 doesn't and neither do my friends
You can buy them and install them. Check on ECSTuning.com out any other website that sells BMW aftermarket parts
You 2 are hilarious. .
Should of got slotted only and some real pads, like race pads
These brakes have been great so far, multiple 160+ mph slow downs and an autocross day and they still feel great
I had issues of drilled rotors cracking on road course. So i switched to slotted only and a EBC blue pad. Best set up i ever had and i went trough 5-6 different pads before.
You guys still alive?
R is for Randy lmfao!!!
Who are they mocking at the beginning?
Where's the water??
Damn sponsorships yeet