Blow and Go no small talk 🤷🏽♂️ Spray Black flawlessly Then send her home 👉🏼
HTML-код
- Опубликовано: 8 сен 2024
- In this video I will demonstrate a few of my methods when I want to get a pretty clean and pretty flat finish on a black vehicle. These are just a few of the key techniques I use although there are others like keeping your holes clean wipe your holes with an old tack rag after every time you set it down. Just wanted to show you guys a few simple techniques Thank you for watching.
clear coat Amtech product of ProSpray
www.amazon.com...
Base blender/wet bed
www.amazon.com...
Compound
www.amazon.com...
3M machine polish
www.amazon.com...
Presta Fast Wax
www.amazon.com...
Prospray spot blender aerosol can
www.collision3...
You give a lot of helpful advice even though you don't have to. Thank you for your generosity.
No problem Kevin. I'm just waiting until my channel gets bigger so I can get the real tips I have tucked away. But right now I have to wait because every time I put up the old trick that I learned from old-timers the tip is then taken and displayed on a large channel as if they were the ones that learned about the trick meanwhile the trade secret was performed before the individual was even born so it's impossible for them to know it. So I have to hold on to a lot of things I know until my channel grows and I get the recognition I deserve. But thank you Kevin.
One of my favorite channels
Thanks Man good to hear. This one of my favorites too. 😉😂
WHAT'S UP TRIGGERMAN,JUST WANT TO SAY THANKS FOR THE NEW VIDEO,AND DON'T WORRY ABOUT THOSE HATERS,BE HAPPY, GREAT JOB TRIGGERMAN
Man I ain't worried about Noooobody. Just having fun my man. You're more than welcome. Glad you guys enjoy them 🤜🏼🤛🏼
THUMBS UP BRO.,YOUR DOIG A GREAT JOB TEACHING ,BUT NEVER UNDER ESTIMATE ENEMIES............
@@thetriggerman954 4-SHO
Hasaaterrrrrr, lol you crack me up bro and you’re a beast with that gun!
Lol thank you Curtis 😎 starting to get the hang of it 😉
You done some great work
Thank you Darren 🫡
I'm Starting to get the hang of this painting stuff 😁
Looks great, thanks for the tips
Thank you, and you're more than welcome
I watch all your videos. I would like to see more how to fix different issues. Like frying up or crow feet as some say. Runs, molting , large orange peel and anything else. Thank you.
Thank you for watching and I'll definitely get more of those videos up for you guys. 💪🏼
masterful job bruh............And great info for people like me appreciate !!!!!!!! Stay blessed
Thank you brother I'm glad it could help. Blessings to you and yours from the Trigger 🤜🏼🤛🏼🙌🏼
Beautiful work Triggerman
Thank you Mike 🤜🏼🤛🏼
your very Talented. Thanks for the educational video. you the man
Thank you man, I greatly appreciate it. And you're more than welcome 🤜🏼🤛🏼
Super clean job Triggerman 💪🏾 you killed another one and gave some great tips 💯
Yooooo UPK in the house. Thanks Brother lil quickie on the F-1-FITTY 💪🏼🏆 💯
This video answers a lot of my mid coat questions. Thank you, great video.
Welcome bro, glad the video helped 💪🏼
Nice
Thank you Jarion 💪🏼
Yowa nice job ,,,,whip out the vevor ,Do another video with a Vevor
I'll do one in another week or so. I was sent out 2 spray guns that I have to do a review on so I'll be working on those next week. But definitely keeping the Vevor warmed up and ready 🤜🏼🤛🏼
Lovely job on the clearcoat TriggerMan the finish is flawless with no nibs, I like to see a nice jet black with a high gloss but I hate painting it as it shows every single tiny bit of dirt😭😂
You smashed it out the booth boss👏🙏👍John UK
Thank you John not bad for an old man in an old booth aye 😂 👴🏽
TriggerMan you aren't old mate, I'm 63 and still painting but the difference is that it's now a hobby and not a job👌😎👍
@@JohnWD40TC02 🤔 ok you got me there. But tell that to these knees 🤣🤣🤣 spray on brother 🤙🏼
Great video my brother, cant say any more than that. 💯 right about getting a clear that works for you, my weekend clear is $250 Aus dollars, and i can make that shit do whatever i need. The stuff at work is 3 times the cost and just hates going on heavy, its made for peel. So thats a good point.
Keeping it real man, love your work ❤.
CoCkOooo thank you brother. That's right maybe that chest do what you want it to do . Who's on control here 🤣💪🏼🤙🏼
👀🤛🏾 I can dig it man!! Know rolling the dice!!😂😂😂👍🏽🏁🏁🏁its like wo!!
LMAO, right I was like fuk that roll of the dice let's make it nice 🙂
I love how you just keep it real from the gate and say that sometimes they come out shabby 💯 but there's always cut and polishing that can fix things when they don't come out so good just make sure you build up the mils of clear to be able to cut it down without loosing uv protection. I also believe in no wet bed cause not everyone especially at home is going to spray that way they just want to get it on and make it look good! I ove your efficiency of just blow and go! Have you done an flow coat vid?
Thank you man. I appreciate it. Actually I have never dropped a flow coat video..... BUT 👉🏼 I have a flow coat video dropping Sunday morning finished it yesterday so Sunday morning after you leave church it'll be up 😁😁😅😅😅
@thetriggerman954 that's right my dude keep them coming ill be an suporter tell the end! Well be doing some bigger and better stuff on ur end later as well im taking an break to get an bigger house right now with an bigger shop to build an actual booth soon, super excited!
@@wrightsrrt871 nice brother. Wish you all the best with the transition 🙏🏼
looks great
Thank you sir 💪🏼
very clean fam
Thank you Anthony 🫡
“Blow and go” ayoooo pause big bro 😂😂
😉😄🤣
Hi triggerman you know how you did a video on the Arrow Pro A610 and you had a problem with the gun check where you connect the air hose up take it apart and clean down inside of it I've got that same gun and I cleaned a whole lot of silicone out of it after that it's sprayed real good your friend Larry
When I changed the air cap the gun sprayed like a beast. There is a problem with the air horn on that gun. If you watch the 2 videos I did on that gun you'll see I said swap out the air cap and the gun sprays like a real professional spray gun.
Nice and clean TM nice and clean👍🏿
Thank you brother 👊🏼
Just found your channel, loving it .
I see a lot of paint jobs being left masked up until it’s dry, I was wondering how you stop bridging of the paint onto the masking ? To avoid peeling any paint off with the masking when it comes to unmask ?
Thank you sir, glad you're liking the channel. I actually don't do anything to prevent bridging I only put 2 coats of clear on my jobs so to free material doesn't get that thick to build up. Every now and then id I have to put a third coat i will unmask the areas that could potentially bridge. Or sometimes the prepper uses a fineline tape last and I peel it off so the vehicle will still look masked on camera but will be missing the fineline tape.
@@thetriggerman954 👍🏻
Blew 3 liters of primer onto todays job - barely enough & I was mixing paint like it was going out of fashion.. 3l barely got me 1 coat of coverage. Will have to blow on another 3l tomorrow after it gets finessed/the crap addressed. Large vehicles test you out - muscles & head. Gonna be 8 or 9 L of paint into priming alone. Pray for me.:-)
Dammmm son you spraying your ass off 😭
@@thetriggerman954 My hand knows ALL about it. Feels like its broke./
@@jamesward5721 😭🥺
Damn Trigger ( high voice ) you’ve been sneezing boogers on Customer’s black cars man What’s the matter with you trigger??😂😂
Most be that corona bug 🤣
Lookin good Trigger.
Thank you Trav 🤜🏼🤛🏼
I think it helps to be clean before pre cleaning. It helps to use microfiber towels as well, they are cheap and reusable. And believe it or not some trash comes from our clothes. So that paint suite before clear is a must. I use it thru the whole process
Yes you're right. I know some guys that never even leave their stuff booth because they think the dirt fairy will drop dirt on them 😂 my booth is scorching hot and I'm definitely not wearing a paint suit throughout the whole entire process. I would dehydrate pass out and die over a clean paint job. But if that works for you keep doing it brother 🤜🏼🤛🏼
@@thetriggerman954 I’m a little spoiled being in a climate controlled shop.. a/c and heat. The booth is hot but when ur done it’s not
@@juanmata2433 yes you are spoiled lol
Good stuf bro- as always , Lacin game - just stay away from that white van 😅
@@adamwest85 white van with GoPros,chains and sagolas in the back 😲😲😲
prices include shipping and tax. very cheap and good products.
Great point!
Knowledge ❤ good shit trigga
Thank you sir 🤝🏻
Legit as usual
Thank you 💪🏼
I see the door in the booth is open slightly. Better watch out, one of those stray cats is going to sneak in.
Lmao 🤣 that does happen. That is brother 🤜🏼🤛🏼
That job looks clean! Can you sand dirt out of metallic paint jobs before clear? Or is this for more solid colors?
Yes you can. You can sand out of any base. It only starts to get tricky on a mid coat of a 3 stage other than that sand away my man 🤠
@@thetriggerman954 that is something have done a few times if my panel blew up with dirt. I need to get in the habit of doing that more often save me a lot of time on buffing.
@@sphdg yes it will save u lots of time. I don't do it as often as I should either.
Hey Trigger man what’s the cutter you are using tell where I can get some thanks!!!
There is a link in the video description Just do yourself a favor do not use the blades that come with the cutter they supplied cheap blades The blades are replaceable there should be a link there for additional quality blades too Make sure you get better blades and that thing will cut like butter with no problem. I also keep it inside of a Ziploc if you keep it outside the blade will dull from getting oxidized and whatnot.
Hey trigger, question at 11:14 what do you have there on your right hip? Is that an air fed respirator unit? 🤔
45 Glock
@@thetriggerman954 😳 I was kind of thinking that but wasn't sure. Triggerman says safety first I hear that man 😅
Triggerman another terrific video and job well done
Thank you man 🤝🏻
This is why I watch other people spray Russians englishmen aussies and Floridians so I can ask questions like where did you get the orange slitter in the beginning?
Here you go my friend. Works like a charm 😎
amzn.to/3ZFUbeI
Hey trigger, what are you finishing your primer repair in grit wise ?
400 grit on primer areas.
You gave the black base a little extra reducer, do you recommend that with a silver base?
If you're going for a super glass look then yes.
What brand masking tape you using I need to find another brand 3m getting to expensive and Q1 yellow is a hit or miss sometimes it wants to stick and other times just flys off once I get close with my gun and that f150 came out clean real clean love the videos lucky I sprayed black a month ago came out clean
We use orange carworx tape. This stuff is sticky as hell. Probably to sticky lol here is a link
amzn.to/3REhnb9
Triggerman video! Is it Friday already😮
Had to break it up a little. Throw a curve ball 🤣
💪nice
Thank you🤜🏼🤛🏼
Looks nice 👌 mine came out with texture. Im thinking about sanding the clear. What grit you would recommend to sand clear to re-clear it
I have a video dropping Sunday on that. You can use 600 or 800 to re-clear it.
@@thetriggerman954 thanks man
Hello trigger, if you had the 1.4 tip that you say is on the way, it would have been just as crystal clear, how true is it that the 1.3 leaves more crystal in the transparent one, and that the 1.4 leaves more of a Chinese finish
I would get the same finish, just in faster time. I mainly want the 1.4 for bigger jobs. It's nice to have options to switch them out.
Great detail on this one and man that looks awesome! Q. Is that transtar clear?
Thank you this is a product by ProSpray called AmTech link is in the video description. 💪🏼
@@thetriggerman954
Excellent! Thanks for the quick response as usual.
How does this base and clear compare to speedokote? Base seems be a few more coats but comes out nice
I've never sprayed speedokote so I could give you any opinion on it. It's as good as any other products that I've sprayed and that's from most of the older lines of ppg, DuPont, spies, even Sherwin-Williams again older product lines 12 plus years ago. I've been here spraying this for 11 years. So I'm sure formulas have changed out there.
What the flash off time between clear coat?? How many minutes man??
10 minutes man 🫡
I know every setup is different, But besides 14 psi, How you setup your gun? I assume 1.3 tip on the DV1? Full fan and fluid?
I was spraying base at 16psi then dropped to 14 for the last coat. And yes 1.3 tip full fan & full fluid.
WOULD YOU SAY TRIGGER MAN THE ANI SKULL IS GOOD AS THE SAGOLA 4600 EXTREAM I HAVE JUST GOT ONE WITH THE 1.3 AQUA CAP FOR BASE NEXT ON THE LIST MATE SAGOLA 4600 EXTREAM DIGIATAL DVR CLEAR 1,3
I think the sagola is a better gun. That's just my personal opinion. From the gun all the way down to the customer service from the company. Sagola is great.
@@thetriggerman954 JUST GOT MINE OFF EBAY WELL CHEAP BOXED SEALED AS NEW SAGOLA 4600 AQUA 1.3 NON DIGITAL NEXT ON THE LIST MATE DVR CLEAR DIGITAL 1.3 THERE ARE A CRACKING GUN PLUS YOU CAN CHANGE THE CAPS SO YOU DONT NEED LOADS OF GUNS JUST CHANGE THE CAPS CARNT WAIT TO USE IT I HAVE THE ANI 160Q DVR CLEAR / HVLP CAP / AND AQUA
Question. Base with slow reducer. Clear with slow hardener?
Smaller job like this I use medium. The slower the activator the more it will flow out, slow is really slow for a small job so you'd have to e really careful out can backfire on you.
what if you put it on the black wet... what would happen?
Put what on the black wet?
@@thetriggerman954 I was saying what if you spray the black paint wet..if it would come put smooth like in your video
Are you using a lvlp gun?
HVLP
Hi, can i ask you the paint code ?
I'll have to look at the can when I get back to work Monday.
Hey triggerman I got my car in primer now what do I sand it with 400 before I spray it with metallic
400 is perfect for Metallics.
@@thetriggerman954 thanks brother
What brand paint do you use?
ProSpray
Where did you get your ANI gun and parts?
I got the gun from a local paint rep.
What tape do you use
We use carworx
amzn.to/49vaZIs
@@thetriggerman954 does it work pretty good
@@chevyharper5681 yes it's super sticky and flexible. Some people like more stiff tape. So it all depends on the type of tape u like. This one is thin and flexible easy to mask curves. Maybe try to get one roll from a local shop to try out
@@thetriggerman954 i am going to try it for sure dose it come off easy? I have been useing 3m green and yellow
@@chevyharper5681 it doesn't come off that easy. Especially if it sits for days. But it doesn't leave that sticky residue like the cheaper tapes do it's more along the lines of the 3M green just slightly thinner
4SHO
🤜🏼🤛🏼