Simple Shop Bit Holder
HTML-код
- Опубликовано: 20 мар 2021
- Build a simple bit holder to organize your shop. This little holder can make a place for your driver bits. Stop throwing all your bits into a drawer or a box, organize them so they are easy to find and easy to grab. Using a few pieces of scrap wood, I make a small bit holder to hang on the pegboard in my shop. You could hang this with a french cleat or mount it directly to the wall.
Her are the L-hooks I used: amzn.to/47s2mNG
Tools I use in my shop:
Gearwrench 3/8" Ratchet Set: amzn.to/48m0jMJ
Craftsman Screwdriver Set: amzn.to/3SbBY6I
Gearwrench Plier Set: amzn.to/3RFXQWc
Klein SAE Nutdriver Set: amzn.to/3TPltOT
Klein Metric Nutdriver Set: amzn.to/3vqvHuS
Gearwrench SAE/Metric combination wrench set: amzn.to/3vryOCR
Kreg Pocket Hole Jig: amzn.to/3H9tdni
Rhino Ramps: amzn.to/3pDcRtD
3-Ton Floor Jack: amzn.to/3w0JQKx
MITER SAW: DeWalt DWS779S amzn.to/2K7Su5x
PLANER: Porter Cable PC-305TP No Longer Available
Recommended Planer: Delta 22-555 (similar) amzn.to/47mnPHQ
DUST COLLECTOR: JET DC-650 amzn.to/2I4tOZA
BISCUIT JOINER: Porter Cable 557 Plate Joiner amzn.to/2IrCiJj
ROUTERS: Bosch 1617EVSPK 2.25hp amzn.to/41EXqnz
Makita Compact 1-1/4hp Router RT0701C amzn.to/3zZ1Hnk
CORDLESS DRILL and DRIVER: PORTER-CABLE PCCK619L2 20V amzn.to/4aEb6Dq
WELDER: Hobart 500559 Handler 140 MIG Welder amzn.to/2WrCLAe
GRINDER: Delta Power Tools 23-197 8-Inch amzn.to/4azyIJr
DRILL PRESS: ShopFox W1668 Benchtop w/Spindle Sander amzn.to/3l4SxPV
NAIL REMOVER: amzn.to/2XxSmzq
MULTI-TOOL: amzn.to/2Xu3TQl
Photo/Video/Audio Equipment I use:
Neewer Ring Light: amzn.to/2ZCCM7R
Canon Rebel SL3 (250D) camera: amzn.to/41FOPko
Canon 55-200mm STM lens: amzn.to/3DG9Qlk
Diety D3 Microphone: amzn.to/3SofWuJ
The above are affiliate links, while they do not cost you any additional money, I do earn a small commission when you use them. thanks!
Thanks for watching!
Bit Holder
Dennis Coffey
Coffey Craftsman Co. 
Хобби
This is awesome. I looked online for a little while and finally found you. I will share what I have done as soon as I make it. But your idea is great.
Thank you Tonya! I appreciate you watching and yes, please share what you do. I have some other shop fixtures like this I've made. Maybe I should do more videos about them?
This is really good!! Thank you for taking the time and effort to make and upload this. Having recently retired, I'm a beginner woodworker and this is a perfect project for my beginner level, plus, I need to organize my shop anyway!!
These are a great way to get a little experience on something not so critical. I hope setting up your shop goes well! Thanks for watching!
Awesome idea and i will be working on this after work in my garage. I will use this on French cleats
Sounds great, Collin! Thanks for watching!
Just came across this as I’m looking to make tool holders for pegboard. Great idea! Would love to see others too!
Thanks for watching! I'll try to video some of the other holders I use.
Great video! Just what I was hoping to find. Thank you for making this one! 👍
Fantastic! Thanks for watching, Scott!
I watch all your videos,they are very informative.Greetings from Ireland.
Thank you very much, David! I really appreciate the support! I love Ireland....been there 3 times with my Dad, and would go back at a moments notice!
Howdie thanks for sharing your project with us keep it up ya got this thks from Canada 🇨🇦 SK later
Thank you so much for watching!!
Thank you Mr. Coffey
Thank you for watching!
Great project. I try to organize something in my shop daily. God Bless
Thanks for watching, William! I'm the same...I always try to work on organizing and cleaning, especially between projects.
Thanks, so simple and practical.
i will be copying it
Thanks for watching! I'm glad you like it!
I enjoyed this very much may do this for driver bits and also drill bits
Great idea! Thanks for watching, Raymond!
Thanks Dennis, I appreciate the tip!
Thank you for watching, John! I make myself crazy digging around in a drawer for the right bit...finally decided to do something about it. haha
Awesome Video! Keep up the good work!
Thank you so much Chris! I appreciate you watching!
@@dwcoffey I especially appreciate your videos on the Husqvarna Lawn Tractor. Found your videos so helpfull.
On your husqvarna mower there is a red sliding piece where you change you mower deck height. What is that for? I have the same tractor but I don't know what it is for. Thanks for all the videos they have taught me a lot an helped me.
Thank you for watching, Tristan! It is just an indicator to mark your deck height setting.
Did youy have a link for the l-hooks?
Yes sir, sorry about that, I should have included the link. Here it is: amzn.to/47s2mNG
Thanks for watching!
sad part is now days the wood used to make that probably cost more then the bits
That's about the truth, isn't it? I try my best to make all my shop fixtures, especially holders like this and such, out of scraps. At least I don't feel so bad using prime cuts to make fixtures with! :)
Thanks for watching!