I never dreamed the channel would grow to 1 million subscribers. Thank you all very much for subscribing. You are making a huge, positive impact by helping me select products to test, advising on better test methods, and coming up with video ideas that will help a lot of people. Thanks again and best regards, Todd Products Tested In This Video (in no particular order): Irwin: amzn.to/3l5Wnr2 Wiha: amzn.to/2FJ9VbL Makita Gold: amzn.to/3lf2E3Z Milwaukee Shockwave: amzn.to/3j3Xh5u DeWalt: amzn.to/32hm2UW Bosch: amzn.to/2YiICvt Hercules: bit.ly/32iXtqK Bauer: bit.ly/3j4pyJq Harbor Freight Warrior: bit.ly/2Yr75yO
I've been subscribed since the beginning. Always knew you'd make it big when I watched the seafoam video. You've given me lots of great information over the years. Thank you!
Need to test out the new rigid tools, do a drill test on some. I know the impacts and drivers are expensive though. But my top 3 impacts are rigid, milwaukee and makita and that goes for any tools in general. Unless it's hand tools I'll get se cheap craftsman stuff or kobalt just for the lifetime warranty. Enjoy the videos I've watched every single one, life long subscriber 🤙🤙
K3NnY_G thats why he gets millions of views!!!! Watch some of the oldest videos when you get time. It pretty damn cool to see how far he has came with videos and edits! I have been subscribed for long time!
Steve Thea An impact driver is a tool that uses a rotational hammering action to greatly increase torque. This action produces torque in very strong, short bursts, as opposed to a drill driver which produces continuous torque.
Your behind the scenes work: driving to buy wood, screws, material, etc., getting in line, paying, loading, unloading-for each project is appreciated. And drilling 1000 screws! Just a huge thank you. I taught tech ed classes and I know the prep involved. Thank you for answering questions about tools and materials I’ve had for years.
Project farm’s videos are the ones where you think. “No, I don’t need to know this.” But when you watch it you’re like, “Wow, I actually learned something valuable today”...
Yes, exactly. My favourite is the recent wall anchor video. I never felt comfortable installing them, since I don-t expect them to last long, and since I expect them make the wall worse. His video provided such a broad spectrum of results, that I felt that I could choose a product wisely for my needs.
I have been an industrial mechanic for almost 30 years. I have seen and used lots of tools and techniques. I always look forward to your reviews. You have never let me down. THANK YOU.
ok so i'm 1 minute into the video and i'm just gonna hve to stop it there and say the amount of effort you put into all your videos is amazing. No other channels out there like it. 10/10 love your content
I've said it several times before, and I'll say it again.... the amount of effort you put into creating these videos is very imprssive. Nice work.... AGAIN!
February 2022 update: At some point Milwaukee changed its packaging to claim “up to 30x life” instead of “50x.” I wouldn’t be the least bit surprised if Todd’s work here was a factor. Gotta love that.
I can't imagine anyone being fooled by such extravagant claims anyway. I don't know why they even think that's good marketing. Still though, Milwaukee is lookin' real good right now.
"I never dreamed the channel would grow to 1 million subscribers." You got there by delivering high quality content with an understandable, no-nonsense/no-fluff delivery. Much of it is applicable to me - a fairly handy guy that likes to do a lot myself - and I really enjoy your videos. Thanks for helping us get thorough the coronavirus lockdown. I strongly prefer Torx and square drives. If you haven't already, I'd love to see a comparison of the performance of the common drive profiles.
@@deadchannel991 friction does not depend on surface area, only on support reaction (ie how much you press on the thing) and on coefficient of friction between the two materials
Gotta say, after years of real life experience, I've always gone with Milwaukee bits for Phillips and Torx bits, along with the socket adapters. I was afraid it might have just been brand loyalty at first, but the performance was there. Your lab testing conditions coincide with my experience. Thanks for the effort you put into this video!
Hey man...there is a company in Germany named Würth and I have been using their screws, blades, driver and drill bits, grinding and cutting wheels for 13 years now and I also tried EVERY SINGLE bit, wheel, blade and screw on the market in Europe and NONE of them come even close to Würth. If you are not from Europe you should definitely need to try anything they offer. Every bit they have lasts me for very very long time (having in mind I use them 6 days of the week) and it is worth every single cent you spend on it.
As a tradesman , I sincerely appreciate your work. It is absolutely priceless being able to know what product chooches best without having to do all the crap you go through. Gods bless you and the work you do brother . Thank you from a humble glazier
Had a pack of Bosch they would consistently break at 1 per every 4 concrete screws. Changed over to Milwaukee and drove 8 more screws without one bit breaking. Sticking with Milwaukee.
The logical next step, Torx (star) bits! I'd love to see a test on those since I steer clear of Phillips heads generally, if it's practical to use Torx I always will!
@@brodriguez11000 For my trade (weatherization) I find that I am always upsidedown twisted around reaching over one thing and under something else trying to get a screw into something in an attic or a crawl space stretching as far as I can, so nice even pressure isn't really possible in most real-world situations, so I always go Torx because if you can get the bit on the head, it'll drive that baby in. Why is rarely the case with a Phillips head, often it'll round out the head of the screw and damage the crap out of your bit, making the next screws even harder to drive in.
Torx, hex, square and the 3 sided square are far better than Phillips. Though I steer clear of most torx screws and bits as I tend to snap them more often than not.
Thank you for testing multiple Harbor Freight brands! Many of us are just humble DIY/enthusiasts and don't need the absolute best, so budget focus is key. Knowing how the various HF brands compare is super important.
If you dont want to pay for big name brands then definitely stick with harbor freight and stay away from heart. I used to buy heart bits because I live really close to a Walmart but I didn't live close to a hardware store and I broke so many of those impact rated heart bits it's not even funny. I will tell you though Milwaukee bits are worth it they will last far longer than any budget bit in my experiance.
@@dmac1259I bought a four pack of Hart bits to match my impact and I have to say they were great for me. Though I do have to say that for a little more money the Milwaukee bits really cannot be beat!
If you go that far you may have to list your test for traceability to the National Bureau of standards and your testing procedures must be repeatable with identical results. Your torque wrenches must be calibrated and certified calibration to the National Bureau of standards. Everything must be standardized to maintain credibility. It now becomes a great Responsibility and Honesty because one slip up and you can loose all credibility. I wish him good fortune on whatever route he takes. I hope he becomes the best testing agency in the world.
I think this may be the only channel left on youtube that has not sold out. I've never felt that this guy has had any bias on any of his tests against brands. If I am looking for pretty much anything and I find my self left with more options then time I will look and see if there is a project farm video first. Thanks for all the hard work and great videos.
I have found that grinding the first 1mm of the tip of my driver bits has reduced cam out considerably. I use mostly stainless steel screws, in oak, and the screw heads are not always as well formed as they should be. Removing that first mm ensures the lands of the driver bit seat properly. It works so well that I now do this with all my driver bits as soon as I buy a new box whether they are for driving stainless or standard steel screws.
Heh I thought I was the only one that ground Phillips bits. But yeah when they get worn out I'll regrind them and they do seem to work better than new then.
This is a good tip, I do it as well. It makes the bits more like JIS bits (Japanese Imperial Standard) which are standard in Japan, and though they look nearly identical to Phillips #2 bits/screws, Japanese bits/screws are not designed to cam out. Their engineering philosophy insists that an engineer design a torque rating for every single fastener used on an item, whether it be an automobile or a kids toy. It's neither better nor worse, just a different philosophy than the U.S./the West...
@@mediocrates1937 sure the "I" doesn't stand for Industrial? And yeah JIS does make a mess of things. I just love standards. There's so many to choose from!
I'll check back to see how many likes this suggestion receives and hoping viewers will suggest brands they want tested. 100% of the ideas and brands tested are from viewer's recommendations. Thank you!
watcher13th I mean he uses very controlled scientific method to do all f his videos. Making sure everything is constant and testing multiple variables but only one at a time.
Thanks for making these comparisons! I work as a mechanic and it always seems to throw the supply shops for a loop when I call them up and insist on specific brands for everything. Your reciprocating saw blade comparison introduced me to the Diablo brand and that really helped me out when I was working on equipment that I couldn't use torches around.
I always buy the cheapest impact bits- but I brake them too often! I'm very thankful you have these tests- helps provide the info we all need to find the quality products we can afford.
No nonsense, no fluff, no rambling. Straight info. I dont own any tools, i live in an apartment in a big city (being country that makes me feel gross) and dont own any tools other than the standard stuff to fix stuff around the house (screwdrivers, nails, hammer, etc) but i love your videos!
Not many ladies here but despite doing mostly household repairs/projects, I don’t want to waste money on inferior products. Thanks for your work & here’s another sub! 👍🏼
The Bauers seem like a surprisingly good bit for the money. Here's a suggestion: try different drive types. I'd love to see a similar comparison for square-drive/Robertson, Philips, JIS, Pozidriv, Torx, and hex/Allen. When building stuff I tend to gravitate towards square-drive, Torx, and hex, but I've been really impressed with JIS when I've encountered it on Japanese motorcycles. Thanks again for all of the work you do for these videos.
@FoxRcng708 I like the torx bits best, less likely to jump out of the screw . I go out of my way when I need screws to get the torx and stay away from the Philips
I love my bauer drill/driver set , add in the LED light or two as they are a must. I really wish they sold a battery contact cover. I don't like having lipos sitting around with exposed contacts. I also got my compound sliding miter saw but i had to do a LOT of hand work and sanding to get the turntable and outfeed ledges to be level and true. That saw with my own zero clearance throat piece and my own DIY zero clearance fence. I had to put work into making the tool do what i wanted, + build a 3 foot infeed/outfeed table and tie it into the fence, but all the tools from HF that i have gotten have been champions. Even the belt/circle sander combo. I had to tweak the motors position to tension the belt, but adjustment is to be expected in any direct belt driven tool.
I've used about every bit in existence. All I've used the past two years are the Milwaukee 3 and 6 inch shockwave bits. They have the best fit/longevity in my experience.
as an electrician i use the milwaukee 6 inch bits almost exclusively in my bosch 12v impact. they last about 3 months with daily constant use and i usually only have to replace them because i lost it not because it stopped working good
I would just like to give a tip, when you’re using the impact gun as much as you are in this video, as a dewalt owner myself, I have had a few drills burn out and I could never figure out why. The problem was that when under heavy load (like this video) I was covering the air ports to cool the motor as it is spinning in order to apply downward force like anyone trying to make sure the but doesn’t slip off, and it caused the motor windings to heat up and short out. My tip to you would be to rest you’re hand on the very back of the drill and not block the air ports to allow your impact gun to cool and live a much longer life.
At work, my little Milwaukee impact heats up pretty badly when I'm holding it down. The air coming out of it can and has gotten so hot, it burns the hand that's being used to hold the bit in place. Imagine the grease Carnage going on inside the thing!
Not really a tip more of common sense, but thanks for pointing that out, ive seen lots of people do this, i found out just by the heat my handfelt and put 2in2 together
I love that you included the HFT brand that's NOT impact rated, but ADMITTED that throughout the testing (and even gave good reason for including it), and then included some HFT brands that ARE impact rated. I buy a number of Harbor Freight tools, but really try to look at each one to see if it's REALLY "junk" or the best thing since sliced bread. Therefore, I absolutely hate it when so-called "independent" testers clearly favor or try to embarrass (usually by the methodology of their tests) certain brands or ones from certain stores. I've NEVER seen anything in your videos that would give me any clue as to what brand you're a "fanboy" of, or absolutely despise -- now THAT'S fair and unbiased!
“On the next Project Farm we test who makes the strongest Whiskey”...... then we see the M.E with a close up of his liver, “now that’s a lot of damage.”
I was taught it's Whiskey & Wild Women. So, if he needs a hand with some Wild Women, as a widower, I'd offer my service's. So he's not putting his life at risk from his wife. LOL
Milwaukee Shockwave, DeWalt, Bosch ,Makita gold (sam ich używam bo miałem dość końcówek które po paru wkrętach były do wyrzucenia )... wszystko do kupienia na allegro
Videos like this is why I keep watching your channel, in just over 12 minutes you can find out what’s taking me years to find out, that’s why I almost always use first Milwaukee, second Makita, third DeWalt.
for the normal average man you will never get a better testing channel on youtube than this. the amount of information and obversval data you get here is just insane.
Mate you’re a legend. I broke literally 10+ bits with an impact driver on the weekend and was just about to buy more! Thanks for putting so much effort into all your content. 👍🏼
Your dedication to scientific results is remarkable. Thank you for all the effort put into doing what we don’t want to do - have no time to do - don’t know how to do - and so on, on our behalf. My hat off to you sir
Based on the Makita "twisting force to break" test, it evidences the qualities of the predominant Japanese heat treatment philosophy: stale gummy bear. A hard outer shell and a relatively rubbery center. The material twists and deforms, trying to prevent overall catastrophic failure by allowing localized plastic failures. It is achieved normally with a controlled annealing and cooling ramp followed by an induction hardening stinger for the shell stiffness.
I found your channel by accident and it's made a huge difference in just 1 week of watching. I'm a field tech (low voltage) and use cordless tools daily. Your testing allows me to balance durability and price so I can choose the right tool for me. Thank you!
My personal observation has been that the Milwaukee brand tips last the longest. Great to see some actual side by side scientific comparisons to back it up. Thanks for all your efforts! Great video!
I do agree…not just because I’m a Milwaukee fan, but they are good bits. The only exception are Robertson (SQ2) impact driver bits. Don’t ask me why, but the best ones I have ever used have been Dewalt ones. When they grip the bit, it actually takes some effort to get the bit out of the screw.
Working today on a project that will require driving hundreds of screws. I knew I would need to buy some more bits, so before heading out I came here and watched this video. This stuff is absolute gold and I really appreciate the hard work that goes into each of these videos.
The level of work you do to comprehensively test everyday things we need to buy is amazing and we, the working public who just want to know how to use our dollars wisely, appreciate it.
"Driving 1000 screws into a 2x4 puts tremendous load on the screws and the bit" -yeah, but what about the load on the Operator! How did you trigger finger and your hand and wrist feel after all of that? WOW! Job well done as always!!
I worked in the aviation industry for almost fifty years and screwdriver bits are important. There are two brands that are used frequently, Apex and Airtek. Both are very well made and last a long time. Both resist tip wear and stand up well to impact drivers. Aircraft use machine screws made to a high standard and demand a decent driver tip that resists cam out. I have been retired for many years but still use bits from my working days, a testament to their longevity.
Out of curiosity, are Philips the most common screw where you worked, or is it a different type? And so cam out is no longer useful to avoid over torquing?
Damn dude, your understanding of experimental process has improved over these years that I've watched you. Keep up the good work, we need people like you.
Bought the Milwaukee Shockwave bits a few weeks ago using 3" drywall screws as nails for 2x4 stud work. Using an impact driver and they hold up very well. I'll buy them again.
The thoroughness of this man’s channel and effort he puts into bringing the most non biased product performance and information is unprecedented. Such an exceptional channel to watch. I will not buy a tool without checking to see what his findings were first.
As an electrician I use my impact all day, I’ve used the Milwaukee tips for 3 solid years after 4 years of using Makita tips. Milwaukee is the best on my opinion.
Did you tried the black coated milwaukee ones ? I have it and its my favorite after the wurth AW. but for philips or pozidrive, it's even better than wurth or wiha
I used the dewalt bits for awhile, which were great when I was using a 12v impact driver. Very little issues with them, and they didn't wear out that quickly. Now that I upgraded to a 20v impact driver, which has some power, the old dewalt bits shatter quickly, sometimes on the first use.
Holy crap, Todd. I am only a minute into the video and I had to pause and comment. The incredible amount of time and labor that you put into your videos is astounding. From all of us viewers. Thank you so much for all that you do. A very sincere congratulations on your 1M subscriber achievement!! You have definitely earned it.
I really appreciate the effort your put into all your tests. I’ve changed my mind on more than a few brands based on your videos. Keep up the good work.
I don’t know much but I’ll tell you one thing. I don’t spend a dollar on a single toll until I see you talk about it. And honestly all my tools perform very reliably. Your work is very appreciated. Please don’t ever stop
The question is, are some of these made to the JIS standard? Yes, there is an Imperial and Metric cross recess screw driver! That could explain why some didn't fit as well to the screws.
Have you ever seen the cost of a “standard” set of tools. A simple 1/4” ratchet and a set of 5 “standard” sockets whether imperial or metric can cost around $900+.
This is one of my favorite videos yet! I switched to the Milwaukee about a year ago and is BY FAR the favorite but I've used in 25 years! Great video! Best channel on RUclips!
I agree. This was one of my favorite videos so far. Project Farm is the best on RUclips! I hope he makes a decent amount of money on the advertising in his videos. He deserves all he gets and more. I have saved a lot of money because if this guy.
I agree. I've tried a half dozen brands myself always looking for something better. I do alot of steel Fab and I found the Milwaukee bits are some of the most durable bits for the money with less down time changing bits due to wear. Great test! When I started the vid and he said one of the bits claim 25 times stronger, I knew if was the Milwaukee from buying them. I was definitely curious to see how the competition stacked up. Good test to show bit wear and strength. Keep up the great work. I always enjoy your videos
I am extremely grateful for the work that you do. As these bits are sold in bulk and are often used the most on a job site, these tests have shown me how important it is to figure cost and longevity into my future purchases. I wish I had watched this video before buying a pack of Milwaukee bits (after leaving harbor freight), but at least I know I'll be able to save some money when I inevitably have to replace them. Thanks for the info and all of the work you have done and continue to do. I'll try to be more patient and let you find the best options for my future purchases. You've not led me wrong yet.
It's hard to beat Milwaukee Shock Wave impact-rated bits. I have used many of them and they are my personal preference. Yes, they do last "up to" 50 times longer. But "up to" does not mean "will last 50 times longer." As you so aptly stated. It really depends on how intent (dogmatic) you are in using them properly and correctly. Another informative video. You are an expert at this. Thank You. John
Dewalt bits have always broken on me, gotten stuck in screws or worn out after just a bit of use, I have like 20 of them sitting in my tool bag brand new because I hate using them. I like makita gold but they seem too expensive, and they do wear out. I’ve broken wayyy too many cheapo bits to even care about them. But about 2 years ago I bought a 5 pack of the long shaft Milwaukee impact bits and I don’t think I’ve retired one yet, they just rotate in and out
@@cameronjellison2085 I've been using dewalt impact rated bits for a few months now and I haven't had any issues with them breaking or wearing too much. I'm using the dewalt Flex Torq impact bits.
Milwaukee is my favorite brand. I run their drills as well. They help out in the shop more often than not. I have watched my 12v drills out perform 18v drills of other brands
I’ve used the Dewalt bits and I’ve broken a lot of them while building my deck. Then I used a Milwaukee bit and I haven’t had a single problem with it and continue to use it for future builds. Ironically I was using a Delwalt impact driver using a Milwaukee bit.
Agreed.. Milwaukee has better products; Dewalt has better marketing. I've got a ton of Dewalt bits and tools, if they ever break, I'm switching over to Milwaukee.
@@chrismast2790it has a lot to do with cost as well. My tool bag would easily quadruple in price if it was all Milwaukee, and it was purchased in the last year. I really like Milwaukee, but man they're proud of their stuff for sure.
Thank you for making this video! Being a commercial cabinet installer and preferring to use Phillips headed screws, this topic is very near and dear to me. I miss Bosch’s ph2 tips that had three parallel raised texture strips that greatly reduced cam-out. I believe that they were phased out because they were developed before impact drivers were common. In my experience, they did such a fine job in preventing cam-out, One would actually run the risk of breaking the tips while they were quite new. I have personal experience with most of the brands/styles that you tested and everything that I could see fell in line with my experience. I had not previously sprung for the cost of the Milwaukee tips and now I surely will. Previously, Makita was my most expensive experiment and Bauer was my least expensive. It’s nice to see that Milwaukee forgives some of the bad habits that you mentioned and continues to work well even though worn. Keep up the good work bringing us practical content!
Worked with Milwaukee tools a few years ago in my last job, was impressed by how good the drillbit was, so I got myself an angle grinder, shock drillbit and shockwave bits. Just watched this to know if there's a brand even better than them, but as it seems I did nothing wrong and already went with the best. Good video, well done.
For my personal use I've went with Makita but for my job ( maintenance director at a nursing home. You'd be surprised at the work we have to do. And believe it or not although the elderly can be very destructive its the employees that cause the most damage lol) I went with Milwaukee and i am very impressed with their products. I told my wife that when my Makitas finally die I'm going Milwaukee all the way. I've already bought a Milwaukee reciprocating saw, drill bits and a multitude of driver bits of all kinds. Even the razor knife and tape measure i bought have been very reliable. Just good quality. And I'm a very firm believer that in most things you get what you pay for. Although they're cheaper I've never had much luck with brands like Ryobi and the like. Only Ryobi piece I've got that has withstood the years is a table saw. Gotta admit it's been a trooper.
@@kevinlangley9644 lmfao I have a few thousand dollars easily into milwaukee but I keep around the cheapest tablesaw ryobi has and that thing has been impressive, mainly bought it because it was small and light for a table saw. I've had to do some modifications and repairs to keep it going but man for a cheap saw it's a champ.
I never dreamed the channel would grow to 1 million subscribers. Thank you all very much for subscribing. You are making a huge, positive impact by helping me select products to test, advising on better test methods, and coming up with video ideas that will help a lot of people. Thanks again and best regards, Todd
Products Tested In This Video (in no particular order):
Irwin: amzn.to/3l5Wnr2
Wiha: amzn.to/2FJ9VbL
Makita Gold: amzn.to/3lf2E3Z
Milwaukee Shockwave: amzn.to/3j3Xh5u
DeWalt: amzn.to/32hm2UW
Bosch: amzn.to/2YiICvt
Hercules: bit.ly/32iXtqK
Bauer: bit.ly/3j4pyJq
Harbor Freight Warrior: bit.ly/2Yr75yO
@project farm Test twitch bit is the best!
I've been subscribed since the beginning. Always knew you'd make it big when I watched the seafoam video. You've given me lots of great information over the years. Thank you!
You owe us nothing ! You already go above and beyond with the amazing videos ! Proud to be apart of the million subs!
Need to test out the new rigid tools, do a drill test on some. I know the impacts and drivers are expensive though. But my top 3 impacts are rigid, milwaukee and makita and that goes for any tools in general. Unless it's hand tools I'll get se cheap craftsman stuff or kobalt just for the lifetime warranty.
Enjoy the videos I've watched every single one, life long subscriber 🤙🤙
Yes I just see you've reached that. WOW I was in here around 32K. CONGRATS!
The sheer amount of labour this guy does for us just to deliver accurate and concise data.
Thanks as always for the hard, and constant work.
K3NnY_G thats why he gets millions of views!!!!
Watch some of the oldest videos when you get time. It pretty damn cool to see how far he has came with videos and edits! I have been subscribed for long time!
@@caseytbss BUT WHAT IS AN IMPACT DRIVER?
AND WHYS IT CALLED IMPACCT?
Steve Thea An impact driver is a tool that uses a rotational hammering action to greatly increase torque. This action produces torque in very strong, short bursts, as opposed to a drill driver which produces continuous torque.
@@joshuasutton2163 whys it impact
Imagine a bolt that won't move, put a wrench on it and hit the wrench with a hammer! = impact
Your behind the scenes work: driving to buy wood, screws, material, etc., getting in line, paying, loading, unloading-for each project is appreciated. And drilling 1000 screws! Just a huge thank you. I taught tech ed classes and I know the prep involved. Thank you for answering questions about tools and materials I’ve had for years.
You are welcome!
Allah is one God God is Allah Allah has 99 names Allah is almighty
@@ProjectFarmfear Allah
@@RebeccaQueen-ti1bk ameen
@@RebeccaQueen-ti1bkAllah's wife was a child
Project farm’s videos are the ones where you think. “No, I don’t need to know this.” But when you watch it you’re like, “Wow, I actually learned something valuable today”...
Yes, exactly. My favourite is the recent wall anchor video. I never felt comfortable installing them, since I don-t expect them to last long, and since I expect them make the wall worse. His video provided such a broad spectrum of results, that I felt that I could choose a product wisely for my needs.
@@eugenetswong This channel honestly has the greatest value to humanity in all of RUclips.
@@fred_e that's a great way of saying it. :)
Thanks so much!
I have been an industrial mechanic for almost 30 years. I have seen and used lots of tools and techniques. I always look forward to your reviews. You have never let me down. THANK YOU.
Soooooo, what do you think is best phillips bit!!!?
@@phoenixfireclusterbomb
The one that fits best. I have had good luck with Milwaukee and Dewalt.
This is how EVERY review should be. Straight to the point, just the actual facts, and honest.
👌
Thanks so much!
Hear Hear ! That was indeed excellent ! He's like the Athlean X Channel for fitness : good facts, no BS
And the replies should be exactly what he had asked for at the eng of the video
Makita Gold, Milwaukee close tie
ok so i'm 1 minute into the video and i'm just gonna hve to stop it there and say the amount of effort you put into all your videos is amazing. No other channels out there like it. 10/10 love your content
Wow, thanks!
I agree 100%!
I love the tests he comes up with and how methodical the whole process always is.
I'm impressed as well. Very professional!
@@jaystepien921 Haha, I literally just commented the same thing. Such a great RUclips channel.
Hey RUclips THIS GUY NEEDS PAID MORE!! He never does sponsors like these other sell out youtubers and he works so damn hard!!
hey you see his Patreon link. that's what that's for. if you can support the channel go ahead.
Him and AVE are supported by patreon and RUclips adds so they are not beholden to sponsors and we get a truly un-biased review.
I thinks he's doing good for himself. He's really close to that silver RUclips trophy at a million
I got 5 ads on this 12 minute video. He's alright.
Hey, love the videos.
Can you do a comparison between Robertson and Phillips
Bruh the extent to which you go for your tests is insane. We all appreciate your work man 🙏
Thanks!
Bruh? Wow, your down with the kids aincha?
I've said it several times before, and I'll say it again.... the amount of effort you put into creating these videos is very imprssive. Nice work.... AGAIN!
I most definitely appreciate the effort and seemingly unbiased evaluation you make on each and every product reviewed..
Thanks so much!
Agreed!
No kidding
I don't think he is sponsored so he can say whatever he wants about them😂😂😂
February 2022 update: At some point Milwaukee changed its packaging to claim “up to 30x life” instead of “50x.” I wouldn’t be the least bit surprised if Todd’s work here was a factor. Gotta love that.
Nice. I feel if they are exaggerating they should have written up to 1000x life lol
I can't imagine anyone being fooled by such extravagant claims anyway. I don't know why they even think that's good marketing. Still though, Milwaukee is lookin' real good right now.
The goofy zone is just a piece of plastic to hide the narrow metal too lol
@@Xxmeca421xXAllah is one God God is Allah Allah has 99 names Allah is almighty
@@alexanderdark6864Jesus was not killed nor Jesus was crucified
This man is literally The Scientific Method for tools and hardware! Absolutely applaud the enormous amount of effort you put into these videos!
Thanks!
new nickname; 'The new Science Guy'... TY!!😁
Allah is one God God is Allah Allah has 99 names Allah is almighty
@@ProjectFarmdog not allowed ect
@@ck5575don't die as a disbeliever
"I never dreamed the channel would grow to 1 million subscribers."
You got there by delivering high quality content with an understandable, no-nonsense/no-fluff delivery. Much of it is applicable to me - a fairly handy guy that likes to do a lot myself - and I really enjoy your videos. Thanks for helping us get thorough the coronavirus lockdown.
I strongly prefer Torx and square drives. If you haven't already, I'd love to see a comparison of the performance of the common drive profiles.
Oh same here. More surface area=substantial difference in grip.
Yes please do a Robertson comparison.
You ever see AVE videos, check him out very awesome channel also.
@@deadchannel991 friction does not depend on surface area, only on support reaction (ie how much you press on the thing) and on coefficient of friction between the two materials
Imagine explaining to the significant other why you have drilled ~1k screws into wood for 'no reason'. You, sir, are a legend
Thanks!
@@ProjectFarm It's modern art!
@Jam'N'Chips
Either that or bat-crap crazy.
There was a reason though. Testing :)
Gotta say, after years of real life experience, I've always gone with Milwaukee bits for Phillips and Torx bits, along with the socket adapters. I was afraid it might have just been brand loyalty at first, but the performance was there. Your lab testing conditions coincide with my experience.
Thanks for the effort you put into this video!
Allah is one God God is Allah Allah has 99 names Allah is almighty
Hey man...there is a company in Germany named Würth and I have been using their screws, blades, driver and drill bits, grinding and cutting wheels for 13 years now and I also tried EVERY SINGLE bit, wheel, blade and screw on the market in Europe and NONE of them come even close to Würth. If you are not from Europe you should definitely need to try anything they offer. Every bit they have lasts me for very very long time (having in mind I use them 6 days of the week) and it is worth every single cent you spend on it.
@@chilltrip393 who is your lord grave first question
@@RebeccaQueen-ti1bk I don't have a lord. I am human.
Seriously, there should be a "rated outstanding by Project Farm" sticker on all the best products. It's the only recommendation I trust!
On the product packaging it should say "Tested Approved by Project Farm"
Serious shit tho lol, I come here before I buy anything tool related and oils etc
100%!
Or AvE
@@randymathews3348 not as scientific, but a lot more humor. I'm staying away from his vise😉🤣🤣
As a tradesman , I sincerely appreciate your work. It is absolutely priceless being able to know what product chooches best without having to do all the crap you go through. Gods bless you and the work you do brother . Thank you from a humble glazier
I see you watch AVE.
Aunties your uncle?
Men of culture
Had a pack of Bosch they would consistently break at 1 per every 4 concrete screws. Changed over to Milwaukee and drove 8 more screws without one bit breaking. Sticking with Milwaukee.
I have worse. I gotta work with old black and Decker bits
Look up Robertson bits.
@@mustafanaik5866 no.. You don't
@@randymathews3348 the bits that come with the drill. What do you mean?
@@mustafanaik5866 you can buy better bits bro.. You run your saw w the blade it came w?
"honey what are you watching," "some guy driving 600 screws into wood"
🤣🤣🤣
lol Thanks for watching.
I like work. I could watch it all day.
Didar Farage 🤣
lol.good one :)
The logical next step, Torx (star) bits! I'd love to see a test on those since I steer clear of Phillips heads generally, if it's practical to use Torx I always will!
For consistency in driving. Only thing for really tough wood is hex head.
@@brodriguez11000 For my trade (weatherization) I find that I am always upsidedown twisted around reaching over one thing and under something else trying to get a screw into something in an attic or a crawl space stretching as far as I can, so nice even pressure isn't really possible in most real-world situations, so I always go Torx because if you can get the bit on the head, it'll drive that baby in. Why is rarely the case with a Phillips head, often it'll round out the head of the screw and damage the crap out of your bit, making the next screws even harder to drive in.
I agree, would be interested to see if the brand results are comparable. Add in Norske bits, I have heard good things about them
Torx, hex, square and the 3 sided square are far better than Phillips. Though I steer clear of most torx screws and bits as I tend to snap them more often than not.
Yes, WHO in their right mind uses Phillips?! At least Pozidriv is a minimum nowadays.
Can we take a minute to appreciate the effort that was put on the making of this video?
Thanks so much!
No we can't.
Must've been exhausting lol
Never Snows yeah but I'm not liking ur comment
@@arekthekingsecondaryaccoun4208 never asked LMAO
Thank you for testing multiple Harbor Freight brands! Many of us are just humble DIY/enthusiasts and don't need the absolute best, so budget focus is key. Knowing how the various HF brands compare is super important.
Thanks for sharing.
If you dont want to pay for big name brands then definitely stick with harbor freight and stay away from heart. I used to buy heart bits because I live really close to a Walmart but I didn't live close to a hardware store and I broke so many of those impact rated heart bits it's not even funny. I will tell you though Milwaukee bits are worth it they will last far longer than any budget bit in my experiance.
@@dmac1259I bought a four pack of Hart bits to match my impact and I have to say they were great for me. Though I do have to say that for a little more money the Milwaukee bits really cannot be beat!
@@nicwelchAllah is one God God is Allah Allah has 99 names Allah is almighty
@@dmac1259fear Allah
You should sell “Project Farm approved” stickers/ seals of approval to fun some more fun testing....
Sign me up for four please!! Great idea bro I would be proud to put a Project Farm sticker on my truck and tool box.
@@hillbillyohio513 I agree.. I would proudly put a Project Farm sticker... especially if it would help support his channel...
If you go that far you may have to list your test for traceability to the National Bureau of standards and your testing procedures must be repeatable with identical results. Your torque wrenches must be calibrated and certified calibration to the National Bureau of standards. Everything must be standardized to maintain credibility. It now becomes a great Responsibility and Honesty because one slip up and you can loose all credibility. I wish him good fortune on whatever route he takes. I hope he becomes the best testing agency in the world.
This had impacted my life and twist forced me to hit the like button
lol. Nice play on words!
I was driven to subscribe
Nice bit of information
Screw this, you win.
Me to and I subscribe. Great contents. Almost 1M 💪
Easily one of the most useful and honest channels on RUclips. Love how straightforward you are. Keep up the excellent work.
I appreciate that!
I think this may be the only channel left on youtube that has not sold out. I've never felt that this guy has had any bias on any of his tests against brands. If I am looking for pretty much anything and I find my self left with more options then time I will look and see if there is a project farm video first. Thanks for all the hard work and great videos.
Thanks and you are welcome!
I have found that grinding the first 1mm of the tip of my driver bits has reduced cam out considerably. I use mostly stainless steel screws, in oak, and the screw heads are not always as well formed as they should be. Removing that first mm ensures the lands of the driver bit seat properly. It works so well that I now do this with all my driver bits as soon as I buy a new box whether they are for driving stainless or standard steel screws.
Great tip! Thank you
Heh I thought I was the only one that ground Phillips bits. But yeah when they get worn out I'll regrind them and they do seem to work better than new then.
This is a good tip, I do it as well. It makes the bits more like JIS bits (Japanese Imperial Standard) which are standard in Japan, and though they look nearly identical to Phillips #2 bits/screws, Japanese bits/screws are not designed to cam out. Their engineering philosophy insists that an engineer design a torque rating for every single fastener used on an item, whether it be an automobile or a kids toy. It's neither better nor worse, just a different philosophy than the U.S./the West...
you can buy grund down phillips bits, its called PH2G or PH2R. they are made for self tappers like you used!
@@mediocrates1937 sure the "I" doesn't stand for Industrial? And yeah JIS does make a mess of things. I just love standards. There's so many to choose from!
I'd like to see a comparison of the different types of screw types. I think the Robertson screw is the best as I've never stripped one.
I'll check back to see how many likes this suggestion receives and hoping viewers will suggest brands they want tested. 100% of the ideas and brands tested are from viewer's recommendations. Thank you!
I'd also like to see that. I think it'd be informative to include varieties like GRK's star-drive and Spax's T-Star Plus.
Yep I'd be very curious of Robertson vs Torx along with any cost differences between screws of those bit type.
@@JoeUrbanYYC I'll Fourth that. Robertson being square seems like it should be exceptional.
Ya I’d love to see pozidriv too
Learned a lot about not only variations in bits, but how technique affects the lifespan of the bit. Very informative video that helped me greatly!!
Glad it was helpful!
America's favorite farmer scientist! You've found your calling in life.
Scientist? LOL
watcher13th I mean he uses very controlled scientific method to do all f his videos. Making sure everything is constant and testing multiple variables but only one at a time.
He is very much a Michael Farady style of scientist.
Thanks for making these comparisons! I work as a mechanic and it always seems to throw the supply shops for a loop when I call them up and insist on specific brands for everything. Your reciprocating saw blade comparison introduced me to the Diablo brand and that really helped me out when I was working on equipment that I couldn't use torches around.
I love it when the videos help viewers! It's a huge source of satisfaction and keeps me testing products!
You are very dedicated on what you do, I think that you are the best testing channel there is on RUclips! Thanks for the content you bring us.
Thank you very much! The positive feedback means a lot!!
I’ve said it, but it bears repeating 👍
DAMN RIGHT HE IS, TAKES A HELL OF A LOT OF TIME & THE STUFF HE COMES UP WITH TO DO TESTS ARE UNMATCHED. LOVE P. F.
I always buy the cheapest impact bits- but I brake them too often! I'm very thankful you have these tests- helps provide the info we all need to find the quality products we can afford.
Thanks for sharing.
Dude, I love how succinct, scientific, relevant and usable every one of your videos is.
Keep doing what you're doing.
I appreciate that!
You've made it to 1 million subscribers because you do a great job! Keep up the great work and content!
Thanks! Will do!
O
No nonsense, no fluff, no rambling. Straight info.
I dont own any tools, i live in an apartment in a big city (being country that makes me feel gross) and dont own any tools other than the standard stuff to fix stuff around the house (screwdrivers, nails, hammer, etc) but i love your videos!
Thanks! Excellent Work...
You are welcome! Thanks for your support to the channel!
You're almost to 1,000,000 Subs!
Almost exactly three years since your first upload, Congrats 👏 🎉
Thanks for watching!
So the bits scratch at a level 6, with deeper grooves at a 7?
*JerryRig has entered the chat*
lol. Nice! He's got a great channel
@@ProjectFarm No, you have a great channel ;)
@@thatdude5104 No, They both have great channels! :D
Haha
Jerry Rigged ?
Hmmn,
is that sorta like
"Jew'd Down" ?
I bet there's not a site with that name on RUclips.
When I'm ready to find a wife I will employ this guy.
LOL! Dang, too late for me!
He’ll find ya the best one
Dammit man , y'all fellas just ain't right 🤣 but on that note , wish I had a set of mud grips made of it .😳👍😬
God damn
@You Wish I'm interested to see the results of this test.
Not many ladies here but despite doing mostly household repairs/projects, I don’t want to waste money on inferior products. Thanks for your work & here’s another sub! 👍🏼
Thanks for watching and subscribing!
I havent seen all his uploads, but this one so far vividly demonstrates how thorough this guy performs a review. A god sent to us consumers.
Glad I can help! Thanks for watching.
This video really had an impact on my purchasing decision.
Me too. I realize I've been screwing up.
I see what you did there
@@jimdavis1566 That is a bit sad.
can we please keep this thread going ?
NATH TAYLOR depends on the thread pitch
The Bauers seem like a surprisingly good bit for the money.
Here's a suggestion: try different drive types. I'd love to see a similar comparison for square-drive/Robertson, Philips, JIS, Pozidriv, Torx, and hex/Allen. When building stuff I tend to gravitate towards square-drive, Torx, and hex, but I've been really impressed with JIS when I've encountered it on Japanese motorcycles.
Thanks again for all of the work you do for these videos.
I agree with you Josh
Thanks for the video idea.
@FoxRcng708
I like the torx bits best, less likely to jump out of the screw .
I go out of my way when I need screws to get the torx and stay away from the Philips
We mostly use Robertson's up here north of the border. Would really like to see how they stand up.
Since i started using torx I never bought philips heads anymore, torx almost never slip out even using minor pressure
Bauer is next level. HF’s best kept secret. Cheapest and best of their “premium” brands.
I love my bauer drill/driver set , add in the LED light or two as they are a must. I really wish they sold a battery contact cover. I don't like having lipos sitting around with exposed contacts.
I also got my compound sliding miter saw but i had to do a LOT of hand work and sanding to get the turntable and outfeed ledges to be level and true. That saw with my own zero clearance throat piece and my own DIY zero clearance fence.
I had to put work into making the tool do what i wanted, + build a 3 foot infeed/outfeed table and tie it into the fence, but all the tools from HF that i have gotten have been champions. Even the belt/circle sander combo. I had to tweak the motors position to tension the belt, but adjustment is to be expected in any direct belt driven tool.
I bought 2 for my last remodel, and owned a hammer drill for 3 years. Super tools
So much awesomeness coming out of the Bauer line lately. Soon 5AH batteries.... maybe even 8AH batteries.. :D
I’ve tried most of them and makita gold are really the best all around, they don’t strip out too bad and they also don’t snap
It's not even their 'premium' brand. That's supposed to be Hercules. Bauer is their enthusiast semi-pro line.
im always impressed of the skill and time you put in on these tests..WELL DONE
Thank you very much!
Agreed!
Cant imagine how much work goes into making these videos!
All i can do is say THANK YOU!!
You are welcome!
Very good point!
Thanks!
Thanks for supporting the channel! I really appreciate it!
I can’t imagine setting 1000 screws! Real commitment, great video!!
lol. Yes, it took a while. Thank you
@@ProjectFarm Did you hum the Beach Boys,,,,, Get a round Get a round I get a round while putting the screws in?
The best bit, is the one I can find when I need it.
Yes it is Haha
*THIS*
I can have a 100 of the Damn things and never can find one when I need it. 😆
So true
For me that’s none ever.
I've used about every bit in existence.
All I've used the past two years are the Milwaukee 3 and 6 inch shockwave bits. They have the best fit/longevity in my experience.
Great feedback! Thank you
exactly!! The moment I saw a Milwaukee amongst the lot that he tested, I wondered what’s the point of the video then 😂😂
as an electrician i use the milwaukee 6 inch bits almost exclusively in my bosch 12v impact. they last about 3 months with daily constant use and i usually only have to replace them because i lost it not because it stopped working good
@@trentonreese2713 That's half the problem - loosing them or someone borrowing it "for a second" and keeping it lol.
I love Wiha bits. They’ve been the best for long jobs by far and as far as I’m concerned, the extra work they do is worth the price difference.
Thanks for the feedback.
Just wish they did larger sets like every other brand.
I would just like to give a tip, when you’re using the impact gun as much as you are in this video, as a dewalt owner myself, I have had a few drills burn out and I could never figure out why. The problem was that when under heavy load (like this video) I was covering the air ports to cool the motor as it is spinning in order to apply downward force like anyone trying to make sure the but doesn’t slip off, and it caused the motor windings to heat up and short out. My tip to you would be to rest you’re hand on the very back of the drill and not block the air ports to allow your impact gun to cool and live a much longer life.
At work, my little Milwaukee impact heats up pretty badly when I'm holding it down. The air coming out of it can and has gotten so hot, it burns the hand that's being used to hold the bit in place. Imagine the grease Carnage going on inside the thing!
Not really a tip more of common sense, but thanks for pointing that out, ive seen lots of people do this, i found out just by the heat my handfelt and put 2in2 together
I have a friend who is an old sheet rocker he has his corded drill that he uses always on to keep the fan moving air over the motor. He swears by it
jesse serfling Absolutely correct, keep the circular saw running a little longer before and after the cut too.
The Holy Flapjack that’s why I love my makita vent on the side
Dewalt would last us about 1 box of 3 1/2 screws since switching to milwaukee we are at 10 boxes and counting so for us it's a clear choice
I love that you included the HFT brand that's NOT impact rated, but ADMITTED that throughout the testing (and even gave good reason for including it), and then included some HFT brands that ARE impact rated. I buy a number of Harbor Freight tools, but really try to look at each one to see if it's REALLY "junk" or the best thing since sliced bread. Therefore, I absolutely hate it when so-called "independent" testers clearly favor or try to embarrass (usually by the methodology of their tests) certain brands or ones from certain stores. I've NEVER seen anything in your videos that would give me any clue as to what brand you're a "fanboy" of, or absolutely despise -- now THAT'S fair and unbiased!
Thanks for sharing! Thanks for watching!
PF is a fanboy of getting what you pay for, or as some people may call it, a smart man
You are correct sir. I've watched others that seem to have a party atmosphere to them. True knuckle draggers.
I will say he had to drive 1000 screws rapid fire and went for the DeWilt
Im an electrician, ive been using the same Milwaukee impact bit for five months, used every day all day, still going.
Nice!
Trade interest not allowed
@@ProjectFarmsuicide not allowed
Skipping your meds is not allowed @@RebeccaQueen-ti1bk
“On the next Project Farm we test who makes the strongest Whiskey”...... then we see the M.E with a close up of his liver, “now that’s a lot of damage.”
I would love for him to document his methodology for that test.lol
🤣
Which whiskey can make you drunk faster? Which one's effect lasts longer?
@Project Farm- I’d offer my services to collaborate on this study.
I was taught it's Whiskey & Wild Women. So, if he needs a hand with some Wild Women, as a widower, I'd offer my service's. So he's not putting his life at risk from his wife. LOL
I live in Poland and probably will never use any of those, but your tests are just awesome, detailed and accurate. Pleasure to watch. Thanks!
Thank you very much!
Milwaukee Shockwave, DeWalt, Bosch ,Makita gold (sam ich używam bo miałem dość końcówek które po paru wkrętach były do wyrzucenia )... wszystko do kupienia na allegro
używam Milwaukee Torx T25 i jestem zaskoczony. całą drewnianą altanę (domek) 15m2 na 3 bitach. problem jest taki, że kupiłem paczkę z 25 bitami...
I have seen Milwaukee becoming more popular and more available in the UK
What tools brands are considered best in Poland ?
Can I send you a Father’s Day card because you’ve taught me more than mine.
Glad the videos are helpful
I think thats a no...
@@noahkladivo3752 treated like a stepchild haha
Aww shut down. I'll be your dad if you need. My kids keep licking things when we're out places, I need at least one kid who's lower maintenance.
Lol
Videos like this is why I keep watching your channel, in just over 12 minutes you can find out what’s taking me years to find out, that’s why I almost always use first Milwaukee, second Makita, third DeWalt.
Thanks! Glad to hear!
for the normal average man you will never get a better testing channel on youtube than this. the amount of information and obversval data you get here is just insane.
Thanks so much!
Mate you’re a legend. I broke literally 10+ bits with an impact driver on the weekend and was just about to buy more! Thanks for putting so much effort into all your content. 👍🏼
Glad it helped
The amount of detail that goes into these quality vidoes is insane. Hats down man 🤣 precision experimenting 🔥🔥
Appreciate it!
Your dedication to scientific results is remarkable. Thank you for all the effort put into doing what we don’t want to do - have no time to do - don’t know how to do - and so on, on our behalf.
My hat off to you sir
Thank you so much!
Based on the Makita "twisting force to break" test, it evidences the qualities of the predominant Japanese heat treatment philosophy: stale gummy bear. A hard outer shell and a relatively rubbery center. The material twists and deforms, trying to prevent overall catastrophic failure by allowing localized plastic failures. It is achieved normally with a controlled annealing and cooling ramp followed by an induction hardening stinger for the shell stiffness.
I found your channel by accident and it's made a huge difference in just 1 week of watching. I'm a field tech (low voltage) and use cordless tools daily. Your testing allows me to balance durability and price so I can choose the right tool for me. Thank you!
You are welcome!
My personal observation has been that the Milwaukee brand tips last the longest. Great to see some actual side by side scientific comparisons to back it up. Thanks for all your efforts! Great video!
Thanks and you are welcome!
I do agree…not just because I’m a Milwaukee fan, but they are good bits. The only exception are Robertson (SQ2) impact driver bits. Don’t ask me why, but the best ones I have ever used have been Dewalt ones. When they grip the bit, it actually takes some effort to get the bit out of the screw.
@@stephenparchewski1998trade internet not allowed
@@ProjectFarmsuicide not allowed
Dog not allowed ect
Working today on a project that will require driving hundreds of screws. I knew I would need to buy some more bits, so before heading out I came here and watched this video. This stuff is absolute gold and I really appreciate the hard work that goes into each of these videos.
Thanks so much!
The level of work you do to comprehensively test everyday things we need to buy is amazing and we, the working public who just want to know how to use our dollars wisely, appreciate it.
Thanks so much!
"Driving 1000 screws into a 2x4 puts tremendous load on the screws and the bit" -yeah, but what about the load on the Operator! How did you trigger finger and your hand and wrist feel after all of that? WOW! Job well done as always!!
lol. Great point. The hand was numb for about 12 hours.
Anti-vibe gloves are a valuable asset for jobs like this, mowing/trimming etc.
Mike Harrison video on the best antivibe gloves haha
*the vibes of this drill... they are not good.*
I would say test anti-vibe gloves, but you would have to drive another 1000 screws....
I worked in the aviation industry for almost fifty years and screwdriver bits are important. There are two brands that are used frequently, Apex and Airtek. Both are very well made and last a long time. Both resist tip wear and stand up well to impact drivers. Aircraft use machine screws made to a high standard and demand a decent driver tip that resists cam out. I have been retired for many years but still use bits from my working days, a testament to their longevity.
Out of curiosity, are Philips the most common screw where you worked, or is it a different type? And so cam out is no longer useful to avoid over torquing?
I use those Milwaukee bits every day at work, but i would love to see a comparison like this of the longer bits, like 3 and 6 inch
Second that, seeing how the longest bits compare would be interesting, my guess is that they might actually last longer because the shaft flexes more.
Damn dude, your understanding of experimental process has improved over these years that I've watched you. Keep up the good work, we need people like you.
Thanks, will do.
Bought the Milwaukee Shockwave bits a few weeks ago using 3" drywall screws as nails for 2x4 stud work. Using an impact driver and they hold up very well. I'll buy them again.
Thanks for the feedback.
The thoroughness of this man’s channel and effort he puts into bringing the most non biased product performance and information is unprecedented. Such an exceptional channel to watch. I will not buy a tool without checking to see what his findings were first.
Thanks for sharing.
Watching the bits snap and hearing the "crack" was incredibly satisfying for some reason, like shop monkey ASMR
Glad you enjoyed!
As an electrician I use my impact all day, I’ve used the Milwaukee tips for 3 solid years after 4 years of using Makita tips. Milwaukee is the best on my opinion.
Did you tried the black coated milwaukee ones ? I have it and its my favorite after the wurth AW. but for philips or pozidrive, it's even better than wurth or wiha
Torx bits is the best.
hot dog I do use the black coated impact Milwaukee tips mostly but just got a pack of the Shockwave Pozidrive tips so we will see.
tom eng Are you talking about torx tip style bits and screws? I’m unfamiliar with a brand of tips named Torx.
Thanks for the feedback.
Thank you for always being so thoughtful, diverse, and consistant as possible in all your tests. Nobody else does what you do!
You are so welcome!
I used the dewalt bits for awhile, which were great when I was using a 12v impact driver. Very little issues with them, and they didn't wear out that quickly. Now that I upgraded to a 20v impact driver, which has some power, the old dewalt bits shatter quickly, sometimes on the first use.
Thanks for sharing.
Holy crap, Todd. I am only a minute into the video and I had to pause and comment. The incredible amount of time and labor that you put into your videos is astounding. From all of us viewers. Thank you so much for all that you do. A very sincere congratulations on your 1M subscriber achievement!! You have definitely earned it.
Thank you very much!
I really appreciate the effort your put into all your tests. I’ve changed my mind on more than a few brands based on your videos. Keep up the good work.
Thank you!
My man....I have not seen anyone put in the work you do regarding mechanics, repair, etc. Thank you so much for what you do.
You are welcome
I don’t know much but I’ll tell you one thing. I don’t spend a dollar on a single toll until I see you talk about it. And honestly all my tools perform very reliably. Your work is very appreciated. Please don’t ever stop
Thanks so much!
Dude.....you are the man. Impressive amount of patience exerted in this video. Hats off. God bless.
Thanks a lot!
This is how a proper RUclips channel should be produced and run. Great insight and passion.
Thanks so much!
The question is, are some of these made to the JIS standard? Yes, there is an Imperial and Metric cross recess screw driver! That could explain why some didn't fit as well to the screws.
There's also Pozidrive and probably a few more older variants that are no longer used.
Not none of them are JIS. JIS look completely different and aren't really sold in the us specially not in big bucks strores
Have you ever seen the cost of a “standard” set of tools. A simple 1/4” ratchet and a set of 5 “standard” sockets whether imperial or metric can cost around $900+.
@Scott Heslin you're brittish too.
JIS refers to machine screws such a motorcycle engine case screws not this type of construction screw, Philips, pozidrive and JIS are all different
If all could be as good as this guy in making reviews. No drama, No nonsense. Pure objective comparison. Thanks!
You are welcome!
Shop teller: Why do you buy different brands?
Me: Project Farm
lol Thanks for the feedback.
11:48
For 3” screws, I gave up on Philips heads screws a couple years ago. T25 torx is all I use. So much better than Philips but very good for testing!
Absolutely agree.
@@phbrinsden Totally! 👍
Yes. Torx is the way to go. Especially with 4 in. Good luck not stripping a 4 in screws with a Phillip's head..
Thanks for the feedback.
This is one of my favorite videos yet! I switched to the Milwaukee about a year ago and is BY FAR the favorite but I've used in 25 years! Great video! Best channel on RUclips!
I agree. This was one of my favorite videos so far. Project Farm is the best on RUclips! I hope he makes a decent amount of money on the advertising in his videos. He deserves all he gets and more. I have saved a lot of money because if this guy.
Thank you!
I agree. I've tried a half dozen brands myself always looking for something better. I do alot of steel Fab and I found the Milwaukee bits are some of the most durable bits for the money with less down time changing bits due to wear. Great test! When I started the vid and he said one of the bits claim 25 times stronger, I knew if was the Milwaukee from buying them. I was definitely curious to see how the competition stacked up. Good test to show bit wear and strength. Keep up the great work. I always enjoy your videos
I am extremely grateful for the work that you do. As these bits are sold in bulk and are often used the most on a job site, these tests have shown me how important it is to figure cost and longevity into my future purchases. I wish I had watched this video before buying a pack of Milwaukee bits (after leaving harbor freight), but at least I know I'll be able to save some money when I inevitably have to replace them. Thanks for the info and all of the work you have done and continue to do. I'll try to be more patient and let you find the best options for my future purchases. You've not led me wrong yet.
Thanks!
It's hard to beat Milwaukee Shock Wave impact-rated bits. I have used many of them and they are my personal preference. Yes, they do last "up to" 50 times longer. But "up to" does not mean "will last 50 times longer."
As you so aptly stated. It really depends on how intent (dogmatic) you are in using them properly and correctly.
Another informative video. You are an expert at this. Thank You.
John
You are welcome!
Dewalt bits have always broken on me, gotten stuck in screws or worn out after just a bit of use, I have like 20 of them sitting in my tool bag brand new because I hate using them.
I like makita gold but they seem too expensive, and they do wear out.
I’ve broken wayyy too many cheapo bits to even care about them.
But about 2 years ago I bought a 5 pack of the long shaft Milwaukee impact bits and I don’t think I’ve retired one yet, they just rotate in and out
@@cameronjellison2085 I've been using dewalt impact rated bits for a few months now and I haven't had any issues with them breaking or wearing too much. I'm using the dewalt Flex Torq impact bits.
@@BO-hh8mj I was using the bits in the vid.. I have other dewalt bits I love. But those in the vid are craptacular
I like the PB Swiss. Very expensive, but the best.
i love how you try to keep conditions even and consistent, really impossible to even squeze a suggestion LOL. Great job !!!!!!
Milwaukee is my favorite brand. I run their drills as well. They help out in the shop more often than not. I have watched my 12v drills out perform 18v drills of other brands
Josh Mendenhall the m12 series is amazing, size, power and quality are so much better than other brands.
Brad Edwards I have those, switched from 18v rigid last year, haven’t looked back
Have used many brands and landed on MIlwaukee based on its reliability and performance. Videos like this confirm the choice!
Thanks for the feedback.
Scratches at level 6 with deeper grooves at level 7
😂
Glass is glass, and glass breaks
JerryRigEverthing
corny
Thiago Moreira 😂😂
I’ve used the Dewalt bits and I’ve broken a lot of them while building my deck. Then I used a Milwaukee bit and I haven’t had a single problem with it and continue to use it for future builds. Ironically I was using a Delwalt impact driver using a Milwaukee bit.
Agreed.. Milwaukee has better products; Dewalt has better marketing. I've got a ton of Dewalt bits and tools, if they ever break, I'm switching over to Milwaukee.
@@chrismast2790it has a lot to do with cost as well.
My tool bag would easily quadruple in price if it was all Milwaukee, and it was purchased in the last year.
I really like Milwaukee, but man they're proud of their stuff for sure.
@@YoureUsingWordsIncorrectly I use DeWalt daily, no problems.
Dewalt power tools are excellent, their driver and drill bits not so much.
@@sonofRassmuss Just going to post the same. My Dewalt tools have been awesome!
Thank you for making this video! Being a commercial cabinet installer and preferring to use Phillips headed screws, this topic is very near and dear to me. I miss Bosch’s ph2 tips that had three parallel raised texture strips that greatly reduced cam-out. I believe that they were phased out because they were developed before impact drivers were common. In my experience, they did such a fine job in preventing cam-out, One would actually run the risk of breaking the tips while they were quite new. I have personal experience with most of the brands/styles that you tested and everything that I could see fell in line with my experience. I had not previously sprung for the cost of the Milwaukee tips and now I surely will. Previously, Makita was my most expensive experiment and Bauer was my least expensive. It’s nice to see that Milwaukee forgives some of the bad habits that you mentioned and continues to work well even though worn. Keep up the good work bringing us practical content!
You are welcome! Thanks for sharing.
Ppl.
Look for ACR bits - that's a type, not a brand.
@@oldbridgemaker2094 Thank you sir. Could you please give me an example of what you speak of? A link or somesuch…
RUclips apparently doesn't want to accept my link, just google them, good luck
Worked with Milwaukee tools a few years ago in my last job, was impressed by how good the drillbit was, so I got myself an angle grinder, shock drillbit and shockwave bits.
Just watched this to know if there's a brand even better than them, but as it seems I did nothing wrong and already went with the best.
Good video, well done.
Thanks and you are welcome!
For my personal use I've went with Makita but for my job ( maintenance director at a nursing home. You'd be surprised at the work we have to do. And believe it or not although the elderly can be very destructive its the employees that cause the most damage lol) I went with Milwaukee and i am very impressed with their products. I told my wife that when my Makitas finally die I'm going Milwaukee all the way. I've already bought a Milwaukee reciprocating saw, drill bits and a multitude of driver bits of all kinds. Even the razor knife and tape measure i bought have been very reliable. Just good quality. And I'm a very firm believer that in most things you get what you pay for. Although they're cheaper I've never had much luck with brands like Ryobi and the like. Only Ryobi piece I've got that has withstood the years is a table saw. Gotta admit it's been a trooper.
@@kevinlangley9644 lmfao I have a few thousand dollars easily into milwaukee but I keep around the cheapest tablesaw ryobi has and that thing has been impressive, mainly bought it because it was small and light for a table saw. I've had to do some modifications and repairs to keep it going but man for a cheap saw it's a champ.