I already have a french cleat wall and am inspired by some of your attachments - especially the office supply and tape holders. Very nicely done! I also very much enjoyed your power tool hanger video.
Perfects. But a little tips! If you leave a little bit of salt in between 2 pieces of glued wood, when you press each other together, they doesn’t be so slippery.
Hey u think there is an awesome way to make a French cleat wall that is not connect/screwed into the wall behind. Like a standing white bord . Trying to come up with a design where the legs/feet will support the top weight...
00:30 - 01:40: I have always been told to never wear gloves when working with power tools such as table saws, routers, etc. If the tool ever catches the glove, it pulls the whole hand without you being able to react and you can easily imagine the consequences. Without a glove, there may be a piece of the finger that will suffer, but the rest of the hand will be saved.
Don’t ever wear gloves while operating a table saw. For real, this is super dangerous and you can do some serious damage to yourself if that blade catches it, even if a little bit.
Salut super vidéo juste une petite question comment avait vous fait pour ne pas que votre couteaux diviseur dépasse de la lame sur votre de Walt le miens impossible de le rentrer plus il dépasse quand je dois couper des grosses section obliger de l’enlever ! Merci
nobody but nobody addresses the issue of shop dust covering your cleat items. Cabinets with sliding doors will solve the problem. Use lexan for visibility. Your thoughts
Every now and then I just blow it clean. But honestly, it's not an issue at all. Having the tool super easy to access is much more important than keeping them dust free.
That's the lamest excuse that everybody still uses. You can get a cheap $200 contractor table saw to get yourself going or use a circular saw with a straight edge guide. Find an alternative instead of finding complaints
Finally, a creative (and useful) woodworking vid with quality music!
Thank you!
I’ll use some of your ideas. Thanks from Texas!
Loved the roll holder.
I already have a french cleat wall and am inspired by some of your attachments - especially the office supply and tape holders. Very nicely done! I also very much enjoyed your power tool hanger video.
Amazing ideas in this video. INSPIRED. Liked and subscribed. Thank You.
Awesome holders. Your very skilled and gifted. Like the background music!
I congratulate you for your hard work and woodworking skills, and it's great that you present this to the audience in such a beautiful way!
Thank you so much for those kind words!
Awesome, thanks for sharing, had a lot of doubts and your vídeo solve all
Love this and had an idea to try, when you cut the chisel holder, it made me think "box joint" jig! Less stop block movement...
Yes that would have been way better for sure! Good advice, thanks!
Perfects. But a little tips! If you leave a little bit of salt in between 2 pieces of glued wood, when you press each other together, they doesn’t be so slippery.
Gonna try that! Thanks
Thanks for some excellent ideas.
Outstanding video, very creative!
Great job and nice sound
きれいな工房は、すてきですね。この動画を参考に私も、やってみます。
ありがとう、私はあなたがそれを好きでうれしいです
The guitar music at the beginning was very nice.
Красивая музыка не заглушает инструмент ❤.
Thank you. I am brand new to French Cleats.
Hey u think there is an awesome way to make a French cleat wall that is not connect/screwed into the wall behind. Like a standing white bord . Trying to come up with a design where the legs/feet will support the top weight...
00:30 - 01:40: I have always been told to never wear gloves when working with power tools such as table saws, routers, etc. If the tool ever catches the glove, it pulls the whole hand without you being able to react and you can easily imagine the consequences.
Without a glove, there may be a piece of the finger that will suffer, but the rest of the hand will be saved.
Don’t ever wear gloves while operating a table saw. For real, this is super dangerous and you can do some serious damage to yourself if that blade catches it, even if a little bit.
I cant Event look at it
Salut super vidéo juste une petite question comment avait vous fait pour ne pas que votre couteaux diviseur dépasse de la lame sur votre de Walt le miens impossible de le rentrer plus il dépasse quand je dois couper des grosses section obliger de l’enlever ! Merci
Very good video
How did you make your slide table for saw?
❤❤
who is the guitarist who plays on the soundtrack? Thank you
Great video subscribed! What size of cleat rail do you use and what space between them?
Il aurait été préférable de couper à un angle de 45 degrés dès le début
Super vos petites équerres.. avez vous un lien ?
Merci
Good ideas!! Who is the artist of that really good music?
nobody but nobody addresses the issue of shop dust covering your cleat items. Cabinets with sliding doors will solve the problem. Use lexan for visibility. Your thoughts
Every now and then I just blow it clean. But honestly, it's not an issue at all. Having the tool super easy to access is much more important than keeping them dust free.
A clean shop is the sign of a sick mind. 😋😊
What's a woodshop without everything covered in dust?
никогда не работайте в перчатках с крутящими инструментами!!!
Neato burrito
Great content…music detracts from overall performance. Align the music and video to cross all genres/ages and you’re on track to grow. IMO
Bad music, way too loud.
Making the screwdriver holder so high up makes the next cleat unusable. Just a suggestion.
Nice job 👌 But bro…the gloves..
I know :) Many does not approve of them, hehe.
7 hands tools??? Not everyone has a table saw
That's the lamest excuse that everybody still uses. You can get a cheap $200 contractor table saw to get yourself going or use a circular saw with a straight edge guide. Find an alternative instead of finding complaints
@RandallYoung-vv8oi not a complaint, a fact, maybe not everyone has your money and can afford to pay $200, give yr head a wobble
ASMR for the eyes... if I see you smear glue one more time, I think I'll be dreaming of you nice and smooth fingers
You don't work on a table saw with gloves
Cannot watch someone using gloves on a table saw.
Bro amateur AF why have the laser lvl boy oh boy
В перчатках нельзя работать с пилой, это нарушение техники безопасности