Меня этому в 90стом в ПТУ учили😂 правда с электро инструмента почти небыло. Много вещей быстрей и проще делается, это я вам как краснодеревщик с 30 летним стажем говорю.🤫
At 0:22 the right hand blade should be fitted as shown, the left hand blade should be fitted in the opposite direction. With the wood piece turning clockwise both blades cut. Cheers.
I am a cabinetmaker for over 40 years. There are a couple of good ideas. Most of this work seems sloppy at best. Some are ridiculous and some are dangerous. I worry about people taking this advice who have no woodworking background.
Finally! a really useful video with tricks that I can do at home without the hassle of buying a whole woodworking equipment, just with my home tools and materials, thanks!
Những sáng tạo và ứng dụng khoa học thường thức thế này, quả thật rất tuyệt vời, hữu ích, cho ta thêm niềm vui, hứng thú, yêu đời và năng động hơn! Thế nào? Còn chần chờ gì mà không ghi nhớ, áp dụng ngay thôi!
I am still waiting for the "hack" part like instead of wasting three zip ties, use one that has a hole already in it so it can be screwed to surface and be used to hold multiply cords in place.
5:20 Never use the mitre and fence at the same time. It can cause binding, with disastrous results. If you need to use the fence for registering, then clamp a block to the fence, well before the worked material reaches the blade.
incredible! Just subbed! You have any ideas on how to make hinges stiffer? The ones I used for the doors on the cat house I am building wobble slightly. Not terrible but enough to irk me hehe.
В первом же «совете», ошибка☝️. Полотна лобзика, должны стоять зубьями на встречу друг другу! Автор - всё спизд&л у других! Даже не удосужившись пошевелить мозгами!!!😀😁😂🤔🤯🧠
это специальная наждачка с отрицательным ростом температуры при работе, мне знакомый африканец рассказывал что когда жарко, они там ей холод вырабатывают
I don't know anything about marketing. But the RV and yachting worlds would love this. Also, the military, particularly the navy. Ships and subs are tight for space. Members need to keep dress uniforms slick. Maybe you could get a military contract! Best of luck.
Well thought out, effective and methods of assembly anyone can use no matter their level of expertise. Thank you for creating this video and subscribed!
An Estonian is riding in a cart. He looks and sees a dead crow lying on the side of the road. He stopped the horse, got out, picked up the crow, and threw it into the cart: - “Everything will get stuck in the economy...” A few years later he passes by the same place. He stops the cart, takes out a crow, throws it out: - “No, I didn’t get stuck”...
Sorry, I always liked to see new trends and interesting solutions from your channel. Unfortunately RUclips now blocks your videos because I don't want to allow commercials. I will keep my subscription, but if things don't change, within the next weeks the subscription for your channel does not make sense any more. Thanks, Gregor
I don't know why RUclips has the most scandalous, lying advertisements but boy howdy did they hook a scamming loser ad to your content. I'm not coming back because i can't stand their snake oil. You on the other hand rock so keep it up!
6:19 wow. That is some clever stuff. I am not a woodworker but I loved it! 🇦🇺
On the first tip, the two jig blades should be oriented in opposite directions.
Yes, but the hacksaw blade on the right is correct, the one on the left should be turned upside down!
Super 👍
i love your video
Превосходная подборка советов. Большая благодарность вам и вашему каналу
Меня этому в 90стом в ПТУ учили😂 правда с электро инструмента почти небыло. Много вещей быстрей и проще делается, это я вам как краснодеревщик с 30 летним стажем говорю.🤫
@@veshiu Вы на ТБ обратили внимание краснодеревщик? ;)
Подборка полезная?))). Все это знали учась в школе еще.
At 0:22 the right hand blade should be fitted as shown, the left hand blade should be fitted in the opposite direction.
With the wood piece turning clockwise both blades cut. Cheers.
Finally a good video 👍🏻
I love the tip on using the tape to mark the hole spacing for the wall mount
J'adore simplement et sincèrement.❤
Супер подборка!!! Благодарю!👍🤝
I am a cabinetmaker for over 40 years. There are a couple of good ideas. Most of this work seems sloppy at best. Some are ridiculous and some are dangerous. I worry about people taking this advice who have no woodworking background.
Отличное видео!!!! Столько интересных моментов!! Спасибо!
Never wear gloves when your work whith a circular saw!!!
Right! Or any powered saw
This is one of the best of this type of thing that I have seen!
Great video!
Never did see the thumbnail though.
6:33
This kinda made me sad because it reminded me of my father who would have loved this video. RIP daddy.
In the first video, the hacksaw blade on the right is correct, the one on the left should be turned upside down!
😮what a great tips that you show , now I can start to do woodwork all by myself. Thank you very much
🥰🥰🥰It’s like Lu Ban is still alive!
That was an amazing video. Thanks for putting this on.
Best,i like it
Во всём мире люди похожи.
So I REALLY want to woodwork I'm fascinated
love your work
Слишком быстро показывают, но есть очень крутые вещи..! блин, уровень по угольнику, офигеть!
Вообще-то угольник Свенсона для этого, в том числе, и предназначен)))
Gloves during sawing it isn't smart
Super❤
Machinery fosters precision engineering, critical for achieving high-quality end products.
Оболдеть😇👍
👌👌👋👋👋ottima idea
Boa madrugada!
Gostei muito do que acabei de aprender.
Bom dia.
Ótimo
Vcs tem curso online para marcenaria?
nice job
good job
🤝good work
so cool , i love it
SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER
Finally! a really useful video with tricks that I can do at home without the hassle of buying a whole woodworking equipment, just with my home tools and materials, thanks!
Qué buenas ideas! Muchas gracias!
If you’re going to use gloves and a saw might as well try and find some 3 finger ones.
I'm impressed
Really fantastic. I learned so much. Thank You!!!
Artist
Những sáng tạo và ứng dụng khoa học thường thức thế này, quả thật rất tuyệt vời, hữu ích, cho ta thêm niềm vui, hứng thú, yêu đời và năng động hơn! Thế nào? Còn chần chờ gì mà không ghi nhớ, áp dụng ngay thôi!
I am still waiting for the "hack" part like instead of wasting three zip ties, use one that has a hole already in it so it can be screwed to surface and be used to hold multiply cords in place.
7:44 I guess it is a lesson to make sure you tap it in all the way before cutting.
Показывает как болтом разровнять клей на стыке....
Тут же склеивая рамку ровняет щепкой😂...
Вы своими гениальными идеями сами не пользуетесь😂😂
неужели так сложно понять, что это все просто нарезка разных людей.
In the first example, the saws must be positioned so that the teeth are inclined in different directions.
clean
Like the belt clamp
5:20 Never use the mitre and fence at the same time. It can cause binding, with disastrous results. If you need to use the fence for registering, then clamp a block to the fence, well before the worked material reaches the blade.
Was waiting for some kind of finished product...
Incredible fantastic 👏👏👏
The best tip is plant your corn early!
Скажу как столяр с 35 стажем, все правильно. Век живи - век учись.
Браво коллеги
Какой ты столяр...
Some very dangerous practices are going on with the table saw. 😮
Сам подобным не занимаюсь)) но было интересно посмотреть автору лайк!
Come to see what the thumb nail pic is. And there is nothing at all about it. Just repeating stuff that has already been shown
yes it deserves 1 more dislike
Thanks, just saved me wasting my time!
😅caballosdrmadeta
Me too. Was sure it’s a mouse ladder!😂
Thanks for saving me from wasting my time
Na cola dos encaixes, não passou o parafuso com rosca para alinhar a cola por quê?
incredible! Just subbed!
You have any ideas on how to make hinges stiffer? The ones I used for the doors on the cat house I am building wobble slightly. Not terrible but enough to irk me hehe.
Buenísimo
Все добра 🙌❤️🇷🇺
Дуже пізнавальне відео! Мені сподобалось.
For the first tip, shouldn't the blades be put in opposite directions?
If i see ideas that i can use in the first two minutes i subscribe for more.
I did and i did.
Nice corner jig man.
6:18 This is genius!!!
what was purpose of the tape on the last one?
Кто ты парень? Твоему мастерству и смекалке можно позавидовать 👍
В первом же «совете», ошибка☝️. Полотна лобзика, должны стоять зубьями на встречу друг другу!
Автор - всё спизд&л у других! Даже не удосужившись пошевелить мозгами!!!😀😁😂🤔🤯🧠
اللهم انصر اخواننا في فلسطين 🇵🇸🌹
Amen
Must have shares in PVA adhesive producers….
now i found my woodcraft instructor
gloves and table saw not good
wearing gloves on a table saw is a safety no no.
Cool wery ok
Jako zanimljivo
👌👌
Some of this reminds me of Japanese carpentry where no metal is used. Totally wooden objects even if complicated shapes.
А на хрена в последнем моменте нужен был скотч?
3:43 why did you put some whool glove ? lol
Great stuff.
Every one of these tips could be a vid on its own. Too fast to remember any of them and how they are done.
Bagus banget pokoknya
Genial
5:05 досмотрел и выключил, расскажите им кто нибудь что наждачка при работе нагревается.
это специальная наждачка с отрицательным ростом температуры при работе, мне знакомый африканец рассказывал что когда жарко, они там ей холод вырабатывают
I don't know anything about marketing. But the RV and yachting worlds would love this. Also, the military, particularly the navy. Ships and subs are tight for space. Members need to keep dress uniforms slick. Maybe you could get a military contract! Best of luck.
whats the purpose of the tape on the hinge?
Сам не понял. Возможно, чтобы задать зазор, между дверкой и стенкой, при открывании.
Esse canal é bom demais.... além das máquinas e ferramentas mostradas os caras são bons....
FALSE ADVERTISING: where is thumbnail item?
cavilha colada é mais rápido do que fazer rosca. Se for para ser removível use parafuso!
Why is your glue in a plastic bag?
In some places (such as India) they sell it like that. It cuts down on waste.
encaixes cavilhas e cola, só se não tiver parafusos! 😕
Well thought out, effective and methods of assembly anyone can use no matter their level of expertise. Thank you for creating this video and subscribed!
The part of 02:04 has been used for centuries in Barn building
I love the tip on using the tape to mark the hole spacing for the wall mount. That will come in VERY handy in the future. Keep up the good work!! 👍
An Estonian is riding in a cart. He looks and sees a dead crow lying on the side of the road.
He stopped the horse, got out, picked up the crow, and threw it into the cart:
- “Everything will get stuck in the economy...”
A few years later he passes by the same place. He stops the cart, takes out a crow, throws it out:
- “No, I didn’t get stuck”...
Цікаві ідеї дуже цікавий кінцевий результат супер
3:29 fajny trik
Wood for ever
Sorry, I always liked to see new trends and interesting solutions from your channel. Unfortunately RUclips now blocks your videos because I don't want to allow commercials. I will keep my subscription, but if things don't change, within the next weeks the subscription for your channel does not make sense any more. Thanks, Gregor
I don't know why RUclips has the most scandalous, lying advertisements but boy howdy did they hook a scamming loser ad to your content. I'm not coming back because i can't stand their snake oil. You on the other hand rock so keep it up!
WOW! such great ideas. Glad I stopped to watch.
пилки от лобзика вставил неверно.
12:20 - чем вас не устраивают скобы для крепления проводов?