BMW Used ECU Replacement - MSD80 ISN reading Write to CAS
HTML-код
- Опубликовано: 5 сен 2024
- Firstly, sorry about the light! It's not actually that dark in my house but is on camera?
Secondly, the sound and pic quality, after very first bit had to swap to my crappy I phone.
Anyway in this video I go through the process of reading the ISN from a Siemens MSD80 ECU then writing the info into the CAS module. Using the Autel IM608 in the video, its a good tool but there are better for this type of job.
I would like to say thank you to anyone who watches my videos and sincerely hope they help you in some way.
Obviously if you don't want to take on this job yourself your friendly Diagnostic Specialist guy (that's me) is more than willing :)
Full contact details are on our website
speedtweaks.co.uk
Thanks very much for your video. I'm a new im608 user and this was very helpful. Thanks.
Very nice job! I'm only 8 minutes into your video and have great respect for your sharing. I have done this procedure many many times and wish that I found your channel before. You are authentic and experienced. Even from the other side of the pond her in Washington., I salute you. :P
Thank you very much just completed isn write to cas. Your awesome for making this video
I’m also a recent autel user, I recently got a mk908p
Thank for the information.
Were you able to start vehicle without the EGS ISN?
So entering 00000000 as the EGS ISN does that cause an issue if its an Auto (EGS)
Thanks for your video, i decidet to buy im608 according this abilty
Hi thank you for the video. Very helpful. I have a question I’m hoping you’d be able to answer. Can I replace an msd80 with any msd80? As long as it’s cloned to the car? E.g I have a faulty msd80 from a n53, can I get an msd80 from any other engine code? I have a Ktag so can clone ecu using that.
Thank You Very Much This Video Really Helped Me Out.. I Wes stuck on the renew part I didn't know you could input the 8 zeros for the egs isn # I had tried 12345678 and I believe I tried 1111111 it didn't work also I can't wait to do the job now knowing what needs to be done . Hey Thanks Again it really helped me out .... Eric
Hello,, thanks I did it, exactly as you showed,, and it solved my communication between modules,
But the mileage went to 0
Do I just need to adjust on cas3?
Hello, didn't you need to re-program the keys on bench before going to obd work?
I supposed that as the CAS is renewed, then it will not accept the old keys. Am I right?
Will this 100% still use the original keys that go to the cas module? It would be pretty bad if the original keys are useless and have to program new keys.
I have a 2010 535i e60/e61. Was trying to backup the ecu to update for key programming using the im608. First part of the 5 minutes passed which was good. The last 5 minutes it crashes and failed. Car no longer starts. Autel tells me to pull out the ecu, solder the wires on and read the eeprom and flash for they can give me a new file. I need help soldering it on. Can you help ?
are you being serious
Do you sell step by step tutorials on how to do this?
hello
i'd like to ask a question, can you change the ISN number on the MG1 Computer?
Thanks
Excuse my ignorance, so you are editing the CAS to accept the used DME?
Great video, can this be done with ms908p via obd port only on a e65.?
Any advice on cloning my msd80 to an msd81 then new cas and key...using a cgpro-9s12?
Where can I read autobox egs isn from?
can you tell what is the tool you use , 10x apprecaite
Great video, as you say it’s all about the €/£/$
When you have a problem in the transmission because of the isn the car will not apply changes so it is not recommended to change the isn remember it is a case not an ews
Nice I've just learned something new from you, can IM508 do the same?
And please would that breakout box chiptuningshop work just like the G box 2 I'll be appreciated if u or some others give me the contact answr.
Hi can the im608 do range rover sport 2017 all keys lost
Great video. really helpful. just one question sir, how do you determine the key frequency??
Still have to program keys after this
Mine is MANUAL, what should I put in?
which one are better for the job in you opinion ?
Love the video
Mate were is a good place to buy mercedes key
Fob from
Right now I'm buying from auto wave
But bit pricey at £30 a fob
I buy from Autowave, tbf the price is good, I charge these out at £150. Unfortunately they don't seem to do them with the emblem anymore. Emirates Keys does the emblem ones, but dont think you will get deliveries from them until covid19 is sorted
I wonder is it a similar idea with a Mercedes ecu? I’ve got a Mercedes van with a suspect engine ecu that needs replacement!
Some Mercedes are pretty simple. Is it EDC16? Just get used ECU, renew and program
Awsomee😊😊
hello does autel im508 have this option
does it work for MSV80?
what autel device is that mate ?
Hi there. My wife has a 2015 330i M Sport Touring which is begging for a B58 swap. Is it possible to make the car accept the 6 cyl ecu? Would be using a write off car as a donor so engine, loom and ECU as a set. Regards, Ryan
Hi Ryan, yes the ECU, FEM/BDC and key from the donor will do the job. If donor is before mid 2017 should be a direct plug in FEM with no wiring required
@@SpeedTweaks Excuse my ignorance... we are a bit slow here in Australia. What does the FEM/BDC acronym stand for?
Disregard. Found it. Thanks heaps for the reply. Will CAS still need to be adjusted or use that from donor as well?
Hi 👋 where are you based?
how much do you charge
Isn number meaning sir?
Individual serial number
Z👍👍
Excuse my ignorance, so you are editing the CAS to accept the used DME?
Yes exactly that. On some you can change the ISN in the ECU but these I just change it in the CAS and once running update VIN in ECU diagnosticaly
@@SpeedTweaks how do you change the vin by diagnostic? I did ISN write on dme in an X5 while back but wanted to write vin too but didn't know how or what to use