I'm just getting blown away by these Minis. I worked in computer in my career and we always had rooms full of equipment. Years ago when they moved the footprint to desktops that was huge. Now it's really small. I got a mini for my wife and when I connect it the cables are heavier than the computer. I still use a desktop but I am considering one of these to replace it.
I'm excited. The 15th gen CPU will soon come out and the power consumption will the same good as apple. The size will be smaller and no longer need metal case to distribute heat.
The EliteDesk 800 G3 is available with both 6th and 7th generation processors. I recently (December, 2022) bought a G3 with an i7-6700T (35w) processor in it. The top of the unit was not perforated like the unit in the video. Also, there was a "bump" on the rear containing the Wi-Fi antennas. There were no antenna connections or antennas on the rear. Lastly, mine came with a third Displayport port added in the expansion space on the rear.
Most of these machines that you find on eBay do not have Wi-Fi or Bluetooth. Ones with large external antennas like in the video are extra rare. The ones with WiFi and Bluetooth usually have the bump in the back by the display ports. And another antenna is in the front under the speaker. If you want to add Wi-Fi to one that didn't come with antennas of any kind. Try to find a kit with large rear antennas because there's no mounting holes for the front antenna on units that never came with WiFi.
Not Required, HP sells it as an add-on. It will help with signal strength, but wifi card should be sufficient, make sure you route the cables to the designated area in the back.
@@nassim99345 internal antenna kits are sold online. You will have to remove the motherboard and CPU heatsink to install it. Make sure to get one that is not Intel V pro compatible, as those have poor compatibility. You can use double sided tape to secure the front antenna, that's what I did.
You don't normally get a perforated access panel with 35W TDP processors, those tend to come with the hotter 65W TDP which also has a copper fin heatsink. The GPU is actually on the processor, not on the motherboard or chipset.
Underneath your 2.5" SATA drive, there should be an empty slot for an M.2 NVMe drive. When you lift up your 2.5" SATA drive, is there a fan there to cool your storage drives?
Every time I see one of these and people don't lift out the drive cage and put an nVME drive in, or at least point out it HAS ONE, it kinda drives me a little nuts. lol. The fact it can take an nVME drive is one of the best features of these little PCs, IMO.
I hate mine,and I don't see anyone talking about this issue, and I've had to use one at work for about a year now. The fan is very loud and runs pretty constantly and pretty hard. Because the grid for the fan is facing up it collects dust constantly and is hard to keep clean enough. Also there is almost no airflow on the bottom because the most surface area is nearly flush against a surface. So unless you can rig it up for better airflow, it's gonna be loud.
Have you considered changing the fan? This isn't an issue I have faced nor heard about, this form is used at my place of work and one of the reasons I was encouraged to buy it.
Yes, the 65W models have a more powerful and therefore louder fan than the 35W models and there is also two of them (extra for for the nvme drive) compared to only one on the 35W models. All of that adds to the noise. I have both several 65w models and one 35W model. I can say that the 35W models are very bearable while the noise that the 65W models make is quite annoying especially in a quiet environment.
My newly purchased Mini 800 has 3 Display Ports. I have never used DP before, but I have an unused cable for my Dell monitor. I thought it would be simple enough to connect one to the other, but the monitor appears not to get a signal from the HP. Just says "USB-C not found" (which is how I normally connect to my laptop). .... Never mind: I just discovered that the monitor needed to be switched to manually search for DP.
The one in the middle is interchangeable, you can find it here for around 10 USD, you can either buy it used or configure at the time of buying new from HP website, bear in mind there are newer models now. (Check the specs of your exact model before purchasing) www.ebay.com/itm/325872351404?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g9aeTGxjRo-&sssrc=4429486&ssuid=5EditP2BTw-&var=&widget_ver=artemis&media=COPY
Mine is the HP EliteDesk 800 G3; paid around $100 including Win11 Pro. Very happy with it so far; but I may swap one of the DP for HDMI for more flexibility.
I have an elitedesk 800 g3, i7, 7700, runnings windows 11pro, Storage 256GB M.2, / 1tb HDD 16GB Memory. Just bought two new 27" 75Hz HDMI Sceptere monitors. Just bought it used, it works great, BUT it wont support two monitors . It has 2 vido ports and (1) hdmi PORT. THE message I get is, Your monitor cant project to another screen. Try reinstalling your driver or try using a different video card. I dont have a driver to reinstall, suggestions on video cards or other options.
2x8GB, there's a limitation on the RAM speed as stated by the manufacturer. You can get upto 2666hz, even if you do get a fast stick, you don't gain any performance past a certain point.
Great video. Nice exp;anation. I like your accent by the way. SO CLEAR. I am wondering if this type of HP mini PC's supports RUclips videos on 1080p 60hz with its built in graphic card.
the H-VEC movie decode Intel has in G530 GPU is great for moving images, yes. All Intel GPU is located inside the socket with the lift-rod latch ..and the CPU under the same fan block.
Nice video. I purchased a replacement motherboard to rescue my fried 65W. I transferred all components to the new motherboard and am happy to say I'm back online. But, as it turns out, the board came from a 35W. As far as I can tell, everything is operational, even with two drives are installed. Is there anything I should be aware of? Is flashing the 65W bios worth it?
You risk bricking the motherboard with BIOS update, I'd say, finding it safer to find a compatible 35W charger. Watch out for any weird smells or behavior. I suppose because there's not a big difference in power between 65W and 35W, the board is still operational, but you can't be sure how it behave long term.
I have two of these with an i5 processor. Already NVME and SSD. My question is: What is the advantage in speed with a processor upgrade ?? And which processor it will be ??
You can go as far as i7700 (Kaby Lake), but don't expect a huge boost in performance, I tried both, and the performance improvement is about 5 to 10%, depending on your task.
Thanks for the video. Is it possible to connect it with the G5 Dockingstation, via USB-C cable? I have my 2 screens and all the peripherie connected to it together with my HP Elitebook (for work) and I would just like to add the EliteDesk for private stuff. I would really appreciate if you are able to answer this. Also, sorry for the language or not precise description. Please let me know if I have to clarify something. Thank you.
I have a problem. Perhaps you can help me. I have the elitebook 705 G5. I am ttying to use a dell 180w ac adapter. The voltage and polarity are correct. But it wont turn on. The av adapter works fine. I have tested. Any clues?
Interesting about the usb c not supporting external display, does the g4 support thos with usb c? I calnt find the answer. Thanking you for your video.
Can you tell me the HP part number for the usb c option board that replaces the display port module for a HP 800 G3 mini, also the HP part number for the HDMI option board that replaces the display port module for a HP 800 G3 mini. I could not find the part numbers anywhere on HPs support site.Thank you in advance.
www.amazon.com/HP-3TK72AA-Audio-Video-Connector/dp/B07DH4597J There are different types depending on the generation, make sure you pick the correct one for your device. If you don't know how to, open your device and look at the additional port screws location and position and eye it out. Search for the term "Flex IO"
Hello, does this 65w PC support the i5 7600t CPU? I bought a barebones HP Elitedesk Mini 800 G3 65w and was wondering if I could use that processor with it (I know it supports the i5 7600). Thanks.
Mine has the I7 7700T, no info what's so ever on HP website about the upgradibility of CPU, please do share with us if you managed to get it to work with a new CPU chip.
any "T" CPU is under-clocked, so it can't make more than 35Watts of waste-heat for the cooler. any mini model "65W" option VRM circuit can use any CPU. All are 65Watts or less.
@@bryanminugh9680 Sorry, I think you misunderstood my question, there is currently no cpu in the socket, but it previously had an i5 6500. I was just wondering if I could upgrade to a 7th gen i5 7500. I'm not sure if the older bios is compatible with the newest 1151 gen.
@@nickskizekers1906 Intel says a Q270 chip set motherboard can use project name "Kaby Lake" CPU. The previous project "Skylake" used H110 chip set soldered on the motherboard. For some g3 h-p put an H110, others Q270. More confusing, Skylake and Kabylake are all mixed together in the way the CPU chip got a model number.
Have you tried a cable with DP to HDMI. The left side DP should be capable of HDMI with just a cable that supports HDMI one end and DP at the other end
I use it on 12v. I bought a car cigarette lighter charger to my old hp laptop. The laptop is broken but i use the charger (65w) constantly with this pc not the normal voltage (230v in Europe) socket. Work fine. From mini solar system. I can edit 4k videos like this but the fan is noisy in this case of course.
You certainly can, these models don't come with SSD from manufacturer, but swapping an HDD with SSD is one of the easiest upgrades a one can do at home.
under mechanical HDD support frame, you insert a green strip "naked" SSD to the black socket. It is a PCI (parallel) path, so dramatically faster than a serial-connected (S-ATA) legacy SSD in the metal HHD cage. Communication protocol "nVMe" is very-much-more efficient than AHCI
Yes! You can find it online, it runs at 65Wats for the low power one and 95Watts for the onenin the video, read the specs and search on eBay, I'm sure you can find it.
Thanks for the video and response. Looked everywhere. There are universal power supply adapters, but from what I understand, they won't work with HP. I've seen one for HP Probook with same specs and looks like same barrel plug, but not seen one for EliteDesk
@phurla1 www.ebay.com/itm/134650954446?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sppkcbbtsyy&sssrc=4429486&ssuid=5EditP2BTw-&var=434169317365&widget_ver=artemis&media=COPY This is the one 33USD including shipping, if you have the I7 65w version. (Check your model power requirements here) support.hp.com/us-en/document/c05371240
Update: I tried 3200mhz ram and it remains locked at 2400mhz with no ability to change in bios. Interestingly it’s CL22 but per HWinfo it’s being set at CL17 🤷🏻♂️
@@MojoMagic977 I got a SPI bios chip programer! Downloaded a mod bios for my PC. Updated the bios. Now, i have a lot of options! Then i find the External GPU option. Allocated the resources to the eGPU adapter, Than BOOOM! I Got full size gpu hooked up to my Mini pc! :D Now i can update this GTX 650 ti boost ot a RX 6600 XT!
Will an elitedesk 800 g3 mini 65w machine be compatible with an intel i7 8700 processor? I realize that this processor is an 8th generation introduced to the 800 g4 mini but was hoping it would be backwards compatible to the g3 mini. Can you help please?
Hi John, it's not compatible, 7700 is the highest possible CPU configuration. I had a i7 9700 & i7 8700 in hand, so I tested both, nether one worked despite having the same intel socket (LGA1151).
this "Gen 3" of hp "mini" has model Q270 chipset soldered, and Intel says it's too old for 8100-8800 project "CoffeeLake" CPU, sorry. Get g4 with Q370 soldered chipset mobo
I'm just getting blown away by these Minis. I worked in computer in my career and we always had rooms full of equipment. Years ago when they moved the footprint to desktops that was huge. Now it's really small. I got a mini for my wife and when I connect it the cables are heavier than the computer. I still use a desktop but I am considering one of these to replace it.
I'm excited. The 15th gen CPU will soon come out and the power consumption will the same good as apple. The size will be smaller and no longer need metal case to distribute heat.
The EliteDesk 800 G3 is available with both 6th and 7th generation processors. I recently (December, 2022) bought a G3 with an i7-6700T (35w) processor in it. The top of the unit was not perforated like the unit in the video. Also, there was a "bump" on the rear containing the Wi-Fi antennas. There were no antenna connections or antennas on the rear. Lastly, mine came with a third Displayport port added in the expansion space on the rear.
Most of these machines that you find on eBay do not have Wi-Fi or Bluetooth. Ones with large external antennas like in the video are extra rare. The ones with WiFi and Bluetooth usually have the bump in the back by the display ports. And another antenna is in the front under the speaker. If you want to add Wi-Fi to one that didn't come with antennas of any kind. Try to find a kit with large rear antennas because there's no mounting holes for the front antenna on units that never came with WiFi.
@@David-nh7pxin a unit without wireless connection: is installing an internal wifi card enough? Or an external antenna is required too?
Not Required, HP sells it as an add-on. It will help with signal strength, but wifi card should be sufficient, make sure you route the cables to the designated area in the back.
@@nassim99345 internal antenna kits are sold online. You will have to remove the motherboard and CPU heatsink to install it. Make sure to get one that is not Intel V pro compatible, as those have poor compatibility. You can use double sided tape to secure the front antenna, that's what I did.
You don't normally get a perforated access panel with 35W TDP processors, those tend to come with the hotter 65W TDP which also has a copper fin heatsink. The GPU is actually on the processor, not on the motherboard or chipset.
Underneath your 2.5" SATA drive, there should be an empty slot for an M.2 NVMe drive.
When you lift up your 2.5" SATA drive, is there a fan there to cool your storage drives?
Every time I see one of these and people don't lift out the drive cage and put an nVME drive in, or at least point out it HAS ONE, it kinda drives me a little nuts. lol. The fact it can take an nVME drive is one of the best features of these little PCs, IMO.
You can change the fan speed in the bios settings
You cannot change it per se - you can set it to be faster than default at idle which is usually is not what someone is looking for.
You said the GPU was not upgradeable? Is there a GPU on the motherboard itself? Because I thought they use the IGPU of the CPU.
I hate mine,and I don't see anyone talking about this issue, and I've had to use one at work for about a year now. The fan is very loud and runs pretty constantly and pretty hard. Because the grid for the fan is facing up it collects dust constantly and is hard to keep clean enough. Also there is almost no airflow on the bottom because the most surface area is nearly flush against a surface. So unless you can rig it up for better airflow, it's gonna be loud.
Have you considered changing the fan? This isn't an issue I have faced nor heard about, this form is used at my place of work and one of the reasons I was encouraged to buy it.
@@RandomTeq unfortunately I can't alter it at all as it is company equipment :(
Yes, the 65W models have a more powerful and therefore louder fan than the 35W models and there is also two of them (extra for for the nvme drive) compared to only one on the 35W models. All of that adds to the noise. I have both several 65w models and one 35W model. I can say that the 35W models are very bearable while the noise that the 65W models make is quite annoying especially in a quiet environment.
Buy a tiny fridge - drill some hole - put it in - close the door - duck tape it. Done there no dust nor noise
@@nguyenthehongduc ! Интересная мысль !
Very informative. Thank you
My newly purchased Mini 800 has 3 Display Ports. I have never used DP before, but I have an unused cable for my Dell monitor. I thought it would be simple enough to connect one to the other, but the monitor appears not to get a signal from the HP. Just says "USB-C not found" (which is how I normally connect to my laptop). .... Never mind: I just discovered that the monitor needed to be switched to manually search for DP.
What is it called exactly? I am looking for 3 display port or 3 hdmi port device.
The one in the middle is interchangeable, you can find it here for around 10 USD, you can either buy it used or configure at the time of buying new from HP website, bear in mind there are newer models now.
(Check the specs of your exact model before purchasing)
www.ebay.com/itm/325872351404?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g9aeTGxjRo-&sssrc=4429486&ssuid=5EditP2BTw-&var=&widget_ver=artemis&media=COPY
Mine is the HP EliteDesk 800 G3; paid around $100 including Win11 Pro. Very happy with it so far; but I may swap one of the DP for HDMI for more flexibility.
Yes, or get a DP to HDMI adapter.
@@RandomTeq yes, the two left DP sockets are both DP++ which means you can get an adapter which makes them HDPI compatible.
Good video! Thanks for a nice break down.
I have an elitedesk 800 g3, i7, 7700, runnings windows 11pro, Storage 256GB M.2, / 1tb HDD 16GB Memory. Just bought two new 27" 75Hz HDMI Sceptere monitors.
Just bought it used, it works great, BUT it wont support two monitors . It has 2 vido ports and (1) hdmi PORT. THE message I get is, Your monitor cant project to another screen. Try reinstalling your driver or try using a different video card. I dont have a driver to reinstall, suggestions on video cards or other options.
Great video, thank you 😊 did you get this working with a faster speed of ram (3200)? And are you using 2 x 8gb sticks? Thanks
2x8GB, there's a limitation on the RAM speed as stated by the manufacturer. You can get upto 2666hz, even if you do get a fast stick, you don't gain any performance past a certain point.
Great video. Nice exp;anation. I like your accent by the way. SO CLEAR. I am wondering if this type of HP mini PC's supports RUclips videos on 1080p 60hz with its built in graphic card.
Thank you Tony! 😊
This pc doesn't have a dedicated graphics, it uses igpu, it can run 1080p at 60hz with relative ease though.
the H-VEC movie decode Intel has in G530 GPU is great for moving images, yes. All Intel GPU is located inside the socket with the lift-rod latch ..and the CPU under the same fan block.
Nice video. I purchased a replacement motherboard to rescue my fried 65W. I transferred all components to the new motherboard and am happy to say I'm back online. But, as it turns out, the board came from a 35W. As far as I can tell, everything is operational, even with two drives are installed. Is there anything I should be aware of? Is flashing the 65W bios worth it?
You risk bricking the motherboard with BIOS update, I'd say, finding it safer to find a compatible 35W charger. Watch out for any weird smells or behavior. I suppose because there's not a big difference in power between 65W and 35W, the board is still operational, but you can't be sure how it behave long term.
How great are these at recording 4K video from a webcam?
It's very decent, connect it with an ethernet cable and you should be fine.
Thank you, very informative!
I have two of these with an i5 processor.
Already NVME and SSD.
My question is: What is the advantage in speed with a processor upgrade ??
And which processor it will be ??
You can go as far as i7700 (Kaby Lake), but don't expect a huge boost in performance, I tried both, and the performance improvement is about 5 to 10%, depending on your task.
@@RandomTeq THANKS !!
Thanks for the video.
Is it possible to connect it with the G5 Dockingstation, via USB-C cable? I have my 2 screens and all the peripherie connected to it together with my HP Elitebook (for work) and I would just like to add the EliteDesk for private stuff.
I would really appreciate if you are able to answer this. Also, sorry for the language or not precise description. Please let me know if I have to clarify something.
Thank you.
I have a problem. Perhaps you can help me. I have the elitebook 705 G5. I am ttying to use a dell 180w ac adapter. The voltage and polarity are correct. But it wont turn on. The av adapter works fine. I have tested. Any clues?
Interesting about the usb c not supporting external display, does the g4 support thos with usb c? I calnt find the answer. Thanking you for your video.
Bro switching accents mid sentence... goes from american to eastern european real quick and then back to american :D
If i upgrade the cpu will the fan be able to handle it or will there be hearing issues? Mine is i5 7500 and thinking of upgrading to i7 7700.
It's a small upgrade, but it can handle it as the pc specs are designed to handle from least to most powerful.
Thank u lots sir
Hi, I have a toa amplifier can I connect to it to have externe sound? I tried to put jack cable tca and it did not work. Any advice? Thank you
i7 7700 is the best cpu you can use in this machine. Compatible with 6000 and 7000 series only.
This is the highest performance CPU on this model (Kaby Lake Family) i7-7700.
Pretty much as long as I'm not doing any gaming this will do what ever I need it to do?
Can you tell me the HP part number for the usb c option board that replaces the display port module for a HP 800 G3 mini, also the HP part number for the HDMI option board that replaces the display port module for a HP 800 G3 mini. I could not find the part numbers anywhere on HPs support site.Thank you in advance.
www.amazon.com/HP-3TK72AA-Audio-Video-Connector/dp/B07DH4597J
There are different types depending on the generation, make sure you pick the correct one for your device. If you don't know how to, open your device and look at the additional port screws location and position and eye it out.
Search for the term "Flex IO"
For some reason I've heard this doesn't have Wi-fi receptors, can I play an online game on this without Wi-fi antennas?
Hello, does this 65w PC support the i5 7600t CPU? I bought a barebones HP Elitedesk Mini 800 G3 65w and was wondering if I could use that processor with it (I know it supports the i5 7600). Thanks.
Mine has the I7 7700T, no info what's so ever on HP website about the upgradibility of CPU, please do share with us if you managed to get it to work with a new CPU chip.
any "T" CPU is under-clocked, so it can't make more than 35Watts of waste-heat for the cooler. any mini model "65W" option VRM circuit can use any CPU. All are 65Watts or less.
@@bryanminugh9680 Do you know if the g3 mini 6th gen i5 model is compatible with 7th gen cpus?
I'm just not sure if the bios will recognize them.
@@bryanminugh9680 Sorry, I think you misunderstood my question, there is currently no cpu in the socket, but it previously had an i5 6500.
I was just wondering if I could upgrade to a 7th gen i5 7500.
I'm not sure if the older bios is compatible with the newest 1151 gen.
@@nickskizekers1906 Intel says a Q270 chip set motherboard can use project name "Kaby Lake" CPU. The previous project "Skylake" used H110 chip set soldered on the motherboard. For some g3 h-p put an H110, others Q270. More confusing, Skylake and Kabylake are all mixed together in the way the CPU chip got a model number.
Just bought it
How does this hold up and perform in terms of on/off-line gaming?
It's somewhere between a gaming PC and a high end laptop. I have not tried intense GPU hungry games though.
Can dust still get in from between the case holes?
Yes, but it's very easy to clean.
Can you connect external power button to this mini pc?
Uuuuh i really wanna know that too!
nope you can't there is no header for this but you can solder a 2 wire to power button on motherboard or use a wake on lan
Hello, I just installed a HDMI module to try to get audio through it, but it does not work, it detect it as a DP, is the a solution?
Have you tried a cable with DP to HDMI. The left side DP should be capable of HDMI with just a cable that supports HDMI one end and DP at the other end
Can I edit simple videos on this. Adobe and such?
heavy 4k movies is good on it, no lags ?
I remember streaming 4K on RUclips when I first got it, no issues at all! Worked like a champ.
Is the i5 version any good for music production
Test ? Performances ?
Thanks for the info. I want to purchase this exact machine (ebay). Can I install Linux on it with no problems?
Linux is a far easier and lighter software to handle, it will work fine
Hello. Thanks for your review. Can you please tell me which power supply it uses? Does it run on 12 or 18 V?
I use it on 12v.
I bought a car cigarette lighter charger to my old hp laptop. The laptop is broken but i use the charger (65w) constantly with this pc not the normal voltage (230v in Europe) socket. Work fine.
From mini solar system. I can edit 4k videos like this but the fan is noisy in this case of course.
Grazie
How would gaming be on this
can this output 4k 60 and play 4k 60 vide3o on you tube ?, please reply bro
It can if you tweak the settings, but it won't sustain it.
I bought one online and I do not think I bought a ssd drive with it. Can I purchase one and install it to this at any time?
You certainly can, these models don't come with SSD from manufacturer, but swapping an HDD with SSD is one of the easiest upgrades a one can do at home.
under mechanical HDD support frame, you insert a green strip "naked" SSD to the black socket. It is a PCI (parallel) path, so dramatically faster than a serial-connected (S-ATA) legacy SSD in the metal HHD cage. Communication protocol "nVMe" is very-much-more efficient than AHCI
I want to get the Wi-Fi antenna but can't find the part number/name. Please share it with me, thanks.
www.ebay.com/itm/Antenna-For-HP-400-600-800-G2-G3-DM-Mini-wifi-built-in-Wireless-Antenna-Ipex-/233676279262?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@@RandomTeq thanks a bunch. So I'd need to buy No. 2 & No. 4 options to match your antenna system setup.. right?
@@RandomTeq Awaiting your response eagerly 😁
@@TamasGautam Any WLAN card laptop size will do.
@@TamasGautam 9560NGW - Intel Dual Band WLAN WiFi Wireless M.2 NGFF AC 9560NGW BT 5.0
Is there a DC power adapter? I have yet to find one
Yes! You can find it online, it runs at 65Wats for the low power one and 95Watts for the onenin the video, read the specs and search on eBay, I'm sure you can find it.
Thanks for the video and response. Looked everywhere. There are universal power supply adapters, but from what I understand, they won't work with HP. I've seen one for HP Probook with same specs and looks like same barrel plug, but not seen one for EliteDesk
@phurla1 www.ebay.com/itm/134650954446?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sppkcbbtsyy&sssrc=4429486&ssuid=5EditP2BTw-&var=434169317365&widget_ver=artemis&media=COPY
This is the one 33USD including shipping, if you have the I7 65w version.
(Check your model power requirements here)
support.hp.com/us-en/document/c05371240
4:56
Can you connect two monitors to it?
Upto 3 monitors.
Does anyone know of its possible to install a i7-8700T instead of the 7700T CPU?
The CPU is upgradable, however I can't confirm if the one you suggested will be compatible with this unit. Mine is running I7 7700T.
Dose it work?
Anyone know what the noise level is like under load?.
For my unit, as you would expect from a normal desktop (slightly less noise since the fan is also small).
Is it good enough to do video editing with?
This video is shot in 4K and was edited on the same machine!
@@RandomTeq wow!!!
Push FOWARD to open, not back, okay!!
Where u buy those antennas?
They come with it, at the time of buying they will be offered to you as an add on for an additional amount. Alternatively, you can purchase online.
Did you ever try out the 3200mhz ram?
Update: I tried 3200mhz ram and it remains locked at 2400mhz with no ability to change in bios. Interestingly it’s CL22 but per HWinfo it’s being set at CL17 🤷🏻♂️
Is there is any tracker inside it if someone stollen it
I believe that there's a software supported by windows for this type of function. Don't take my word for it, do your research.
@@RandomTeq Register with your Microsoft account for 'Find my device'.
Can you install Hard drive and SSD both on this device?
Yes, but not at the same time. It supports NVME M.2, along with SSD/Hard drives.
the bare, green strip SSD is held with one screw, under the 3TB "spinner" in metal support cage, >yes
@The Amazon Shopper i can hook up a egpu by using m.2 nvme ?
@@1986Redfieldyes
@@MojoMagic977
I got a SPI bios chip programer!
Downloaded a mod bios for my PC.
Updated the bios.
Now, i have a lot of options!
Then i find the External GPU option.
Allocated the resources to the eGPU adapter,
Than BOOOM!
I Got full size gpu hooked up to my Mini pc! :D
Now i can update this GTX 650 ti boost ot a RX 6600 XT!
crucial/micron is US
Crucial brand is owned by Micron, an American company.
Nothing about the M2 slots!
1 M.2 slot, standard, there's another one used for wifi card buried underneath the heatsink and not visible upon opening.
@@RandomTeq is that B key for NGFF or M key for NVMe?
How do I plug this thing in :(
You will need a display port to HDMI connector.
its not 3g its g3
Will an elitedesk 800 g3 mini 65w machine be compatible with an intel i7 8700 processor? I realize that this processor is an 8th generation introduced to the 800 g4 mini but was hoping it would be backwards compatible to the g3 mini. Can you help please?
Hi John, it's not compatible, 7700 is the highest possible CPU configuration.
I had a i7 9700 & i7 8700 in hand, so I tested both, nether one worked despite having the same intel socket (LGA1151).
@@RandomTeq Many thanks for your swift response. Will stick to the 7700 then. Thanks again.
this "Gen 3" of hp "mini" has model Q270 chipset soldered, and Intel says it's too old for 8100-8800 project "CoffeeLake" CPU, sorry. Get g4 with Q370 soldered chipset mobo
Supporting 3200mhz ram doesn't mean it runs at 3200mhz. It only runs at 2400mhz, educate yourself.
Correct. The i7-7700 (the top performing processor for this PC) is maxed out at 2400 MHz RAM speed anyway.
Does the PC have onboard bluetooth and wlan?
Yes it does have it, Wifi AC and BT 4.2.
The hands. 👎