Next week on Cleetus's channel... "The boys at Texas speed really hooked us up for our jet boat" 6 mos later "This new jet boat engine is from Steve Morris"
This has to be one the most fun builds to watch, at first I was like megh... more jet boats... but this thing is so unique and amazingly well engineered and thought out. Never thought it would beat Cleetus's boat but here we are! The Boiz did it! Love it and keep it up! Lets turn this boat up! I want to see it go 70mph!
@@kick_then_shift Yeah literally perfect for their application. Limited run-time as it is, not like it's on a daily car. Also well protected from dust, dirt and grime in that bay so. Turbo will most likely outlast the engine unless they go crazy on the boost. That watercooled manifold + water-air box is also passively helping the turbo stay cooler than it normally would without it.
Comp turbos are actually gaining popularity, their triple ceramic ball bearing turbos don't need pressurized oil since they have high quality "dry" bearings. unlike most OEM turbos which use a "journal bearing" which is a fancy way of saying a shaft inside a hole with an exact gap between them for pressurized oil to fill.
Once you hit around 58/59 mph with that jet drive pump you have currently you can easily upgrade the impeller Wheels to something with more surface area and you can upgrade the intake great with one that has larger scoops with a sharper angle to get a lot more mph now that you have a turbo on it. You have to remember when you ordered that jet drive you told them you would be using a stock naturally aspirated k series engine on it to begin with so they sized the impeller for that engine not for one with a turbo so there's plenty of meat on the bone so to speak.
Exactly. Boats respond big with small changes. The hulls on the mini jets are designed for shallow water, rocks, branches, cruising.. it's similar to a ski boat hull that was designed for steady, consistent 35 mph runs. I noticed he trimmed it down to keep it from porpoising on launch but didn't see him re-adjust when the boat got up on plane. Maybe I missed that??
Man this video got me so pumped, your jet boat is officially my favorite, right next to the give away boat cleetus had! you guys have built some AWESOME units!
You need to trim you outlet nozzle down a little when you get on plane and swap the inlet gate with a horizontal wing gate to hydroplane up. That will help you increase your speed, allows for a much stronger push.
I grew up on the rivers in Maryland fishing and crabbing had tons of boats, never have i ever seen anything like this boating community. Looks freaking awesome!!
You guys should seriously consider putting together a Honda k engine and jet pump package for people who don't want to go the Sea Doo route. Mini jet boats / Adventure boats are exploding in popularity and your engine pump setup works. I'm sure there's a lot of people out there that would be happy to pay to have that same setup in their new mini jet boat
By the time you factor in the cost of the pump, and the swap the Sea-Doo drop in is less expensive. Plus then you got something which is factory you can resell. Swap hodgepodges don't go for anything even if they're done well.
Like otm said it's considerably cheaper to go the seadoo route and it's a complete setup. Yamaha 1.8 is actually a much better package, stock with a few parts is 350hp but about $6k package vs
@Donald Johnson he has a k swap that will last forever and a kick associated jet pump . Those supercharged seadoo engines are notoriously unreliable. I would take Kyle's boat anyway over Cleetus's.
One of the main things I like about using a Honda Motor in a Mini jet boat I know people that can work on Honda I don't know anyone that's a Sea-Doo mechanic and Honda parts are sold everywhere I think it's the way to go
Kyle is always on kill, love the progress that he has made. To bring boosted boiz up to that level is amazing. Wyatt has fabricated the path Kyle leading anything is possible. Keep doing what you do!!
Since that manifolds running so cool I would cut that fuel tank in half and put half on the other side with a transfer hose between the two. That'll help it sit more level in the water👍👍
@@kick_then_shift Im not saying have it hold 40 gallons of gas, but 2 small cells would be perfect. and when I'm riding my jet ski, my fun time is limited to how much gas I have. and he has a 300-400 hp car engine that hes planning to run E85 in. there's been many times when I headed back to the dock before I was ready to call it a day due to being low on gas. having slightly more fuel than needed is never a bad thing in a boat.
Living in the pacific northwest, our fishing boats are the same design as these...whether ib/ob, outboard, or jet. My 17'6" with a heavy bottom and a 70hp suzuki outboard prop will run 43 mph so you arent far off with the added horsetorques and the loss of 30% from the pump! Our boats ride the same btw!
I was litterly drooling looking at the frs while Kyle was talking. wide body boosted and looking badddd. A win to kyle for the jetski boat. So awesome keeep it up
Gator skippin and turbskis. Cleeters and Limo Skippys. What more could ya ask for in a adventure. Some of George's hilarious lines would have been a bonus. The little boat is rippin.
Regarding the ride height you have to remember that there's a massive amount of water getting sucked into the bottom of the boat just like cleeters race boat and on a short boat there's not much you can do to counter that outside of extending the intake down and then you no longer have a river capable boat
unemployed since Nov18th and not looking like anything happening till new years but still willing to toss something at the boys for a chance at the ride. looking for a lil good luck and some motivation for 2023
The jet boat would be so sick setup with anti lag on a button! Be able to spool er up a bit on the hit, now that would be so sick to hear on the water too! 🙌🏻 Wouldn’t be a boosts bois jet boat without some AntiLag!!!
@@denisohbrien worth a good oL boostedboiz try! Can always rebuild 😂 I’ve seen anti lag done up on the turbo ski’s don’t see why they wouldn’t be able to accomplish this on the jet boat, same concept
Watching these two channels grow together simultaneously brings a tear to this fans eye. The content we all wanted. Cleet team and boosted boiz having a great time. Before fasterproms ruined the whole vibe
So it finally happened. Time to put the other impeller on there! Maybe add a speed sensor and make the FuelTech control your trim nozzle if it can be done too. Can't wait to see the airboat go in action!
Honestly I would just keep it it the way she is man! I think you guys did absolutely amazing with this build. So proud of you guys, you guys inspire me.
@SirSloop yeah for sure. It's still just funny to me to see him excited about 54 mph. But I completely agree. I had a ski that would run about 65 mph, but it felt more like 120 mph.
@@Adam-nv9zo mine runs about 60. its crazy how fast slower speeds feel when you're on the water lol. I can't imagine what those crazy 1000hp jet skis they were riding a while back feel like
Never really thought about it, but the reason alligators have survived through man's "conquering" of the planet, is partly because they generally leave us alone. Other species might not have had the good common decency, hence they get wiped out.
Kyle you NEED/MUST move your jet-ovater/nozzle trim switch to your steering wheel, where you can hit it with you thumb 👍, for safety, and performance!..from Wyoming USA 🇺🇸 🤠
Those jet boats are pretty awesome for calm water running aside for the odd rapid. I wouldn’t suggest an open ocean run. Not a fan of seeing those gators observing dinner motoring by. Cleetus will be back with an upgrade for sure. 👍👍🇨🇦
It's gotta be quite a bit. That engine and jet drive has gotta weigh at least twice as much as the small jet-ski setup in cleet's boat, so it's pretty impressive.
These guys can make any thing that can hold a Honda engine work wht a amazing job well done peace love n much blessings can wait to see the truck make its first pass
You guys are the 2 dudes that make shit yourself that is world wide. On your own. Love you Kyle and Wyatt friends who came from nothing and welding class to here beefing Garrett that makes him love you guys even more for doing a build no one has new invention
The boat alone is like 6K+ with all the option they put into it. Then slapped a k-series into it and boosted it. And also had it professionally wrapped. I’m guessing like 15K-20K in total? I’m sure I’m way off, but I’m curious as well.
@@grantlewis7885 isn’t this the “10ft Headwater” model? It’s $4,600 CAD for a complete kit alone. Then they put like all the options I’m sure, like the Lexan Windshield, which is $850 alone. And then the welded hull alone is another $3250 CAD on top. Add the freight shipping cost to North America, and I’m sure you’re looking a pretty penny.
Turn key ready to go they run $40,000 to $60,000. Kits that you weld up are pretty reasonable and the option s dictate the cost. 1 stringer, 4 stringer, type of windshield, the walk through windshield, stomp grate or welded grate, it all adds to the price of the boat. Since they bought a 4 seater, prewelded, with many of the options, I'm guessing around $20,000 without the engine. You can buy used ones ready to go for around $15,000. Theres also a discount if you buy 2, 3, or more. I forgot the upper end jetdrive they went with. So I'm probably low at $20,000.
It's a little concerning that there's never any mention of safety upgrades as these rockets keep going faster and faster. I know it feels sissy but just in case of an under water, catastrophic failure, it might be a good idea to have some harnesses or noodles available. Looks super fun though.
They wear fire suites at the track but not lifejackets on the boat. I always thought that was ironic. Lifejackets will save your life just like a seatbelt, harnes, HANS, or cage. Just look at what happed to Leo from SxSVlog the first time they rode with Cleet. You can never be too careful...
Make sure you got the right jet when you switch to E85 and 20psi, you might get nothing out of it and might even blow shit up if the jet starts cavitating badly
It's all rpm based, as long as they stay under whatever the maximum rpm rating for that pump is they're fine. The housing is designed to flow that rate.
@@otm646 yes but that's attached to the volume and mass of water it's flowing, which determines the HP requirement at whatever given RPM. So what's optimized for this setup won't be optimized for the E85 high boost cuz it'll be able to move a lot more water, but it'll need more pump to keep up the flow. But it's ok, Kyle mentioned something in the video about it, he knows 🤘
With which E-85 are You supposing and guessing, 'guestimating' these results ? local, fuel, filling station, 'pump' version "E-85", which is commonly 40% ethanol upt to 55%, in warmer temperatures up to 65% in some locations or proper, true E-85=85% ethanol = racing C-85 or something in between ?? It seems that Your "guestimates" are incorrect - how so ? if currently using 'pump fuel' with 10 lbs boots achieves 54 MPH, and each 1 lb increase of boost increased 1 MPH, then to achieve 60 MPH is 6+ MPH, such the boost would also increase 6+ lbs =>thus, 16 lbs boost would result in 60 MPH, 14 lbs MPH would achieve 58 MPH, 18 lbs boost achieves 62 MPH, 20 lbs boost achieves 64 MPH. Then adding the improved power with the use of ethanol increases from there, each result including from lower through higher boost levels. Good Luck Sincerely
@@ForceFed Your reply is appreciated along with its acknowledgement and acceptance. Though, my comment just conveyed the correct assessment, evaluation and simple calculations. All The Best, Sincerely
18:13 I love that "WUA, Somethings breaking" it just tells a lot about the nature of the job and spirit of kayle. Keep up the great work guys! I am loving these videos and especially how frequently they come.
Random thought, would love to see you guys do an off-road build. SUV or small pickup with enough ground clearance to take off-roading, gotta have awd or 4wd; and of course a k swap!
100% do something to trim the thing to ride on the stern of the hull. Way less resistance and it will give major results for top end without needing extra power. 54mph, yes on the water in a small boat that is proper quick. My bone stock 17 footer with a propeller and a v6 stern drive, it weighs probably 9 times as much, but it will sit on the 4800rpm limiter all day and do 60mph. Only trimmed right. Its a 220hp. Nothing fancy, but its licenced for 7 adults.
No don't trim it up more. If your jet drive shoots above the water you are loosing power. Just find the sweet spot on the trim Your boat is bow heavy. I think fixing drag on the hull from the Black rock guard panels will help. Have Wyatt sit in the back on the light side.
Man this thing is rad af guys ... and were I live in nc on the coastline myself I really think I might need to build a lil something like this fam 🤔 😅 then maybe I do a diff engine and we can lime it with u .. maybe one day if I can ever get to that point but keep it rad stay safe and. Build on guys... radical af yal 💪🏽🤙🏽🤘🏼✌🏽🦸♂️🧑🏽🔧😉😜
Kyle, don’t worry about the RUclips experts. Everyone on RUclips in the comment section is an expert in everything. You do what makes you happy. I don’t understand why people don’t just enjoy the video and leave positive comments or nothing at all. Trust me I don’t agree with everything people do but I try to be polite and offer helpful advice without sounding like a know it all or I just say nothing at all. Keep doing what you do. Most of us appreciate and enjoy your content. 👍🏻
Авто/Мото
Next week on Cleetus's channel...
"The boys at Texas speed really hooked us up for our jet boat"
6 mos later
"This new jet boat engine is from Steve Morris"
"I took the turbines out of my helicopter for my jet boat"...
@@paulpence8895 "I REMOVED the Impeller on my Jet Boat and put in a pair of Pratt & Whitney J58 JET ENGINES"
@@Avethohahahaha mach 3+ ramjet boat!
But Who Wouldnt Watch all that.... PFI Freedom JET- Boat!
i LOL'd
This has to be one the most fun builds to watch, at first I was like megh... more jet boats... but this thing is so unique and amazingly well engineered and thought out. Never thought it would beat Cleetus's boat but here we are! The Boiz did it! Love it and keep it up! Lets turn this boat up! I want to see it go 70mph!
Oh Jesus that thing will pop them in the back of their heads trying to ramp up to 70 lol. New rods gotta go in it at least!
I wanna see a fully built k24 and the same turbo that's on the van in it and see what it does on e85!
I’m literally making a parts list to build one of these now… 🤦🏼♂️
This has me smiling and laughing. Cleetus smack talk is amazing
That oil-less turbo is working way better than I thought it would
That style of turbo has been around since the beginning of turbos. As long as you keep them greased they will last a pretty good amount of time.
@@kick_then_shift Yeah literally perfect for their application. Limited run-time as it is, not like it's on a daily car. Also well protected from dust, dirt and grime in that bay so. Turbo will most likely outlast the engine unless they go crazy on the boost. That watercooled manifold + water-air box is also passively helping the turbo stay cooler than it normally would without it.
Need to check out the snow mobile dudes bud. MEGA power reliable as hell.
Comp turbos are actually gaining popularity, their triple ceramic ball bearing turbos don't need pressurized oil since they have high quality "dry" bearings. unlike most OEM turbos which use a "journal bearing" which is a fancy way of saying a shaft inside a hole with an exact gap between them for pressurized oil to fill.
I think Ryan Mitchell's firebird uses those comp oilless turbos on the LS setup when he runs that and he's won tons with that
. . . A true Kyle doesn't not worry about were the stud is in the wall. . . A true Kyle always knows were a stud is not in the drywall. . .
A true Kyle punches through the stud in the wall
He misses studs like he misses 3rd gear
what is going on between ya'll?
Drywall*
Just try again, I don't speak gibberish
I love how the jet boat sounds like a regular boat. The manifold and flap was a really good idea
Oh yeah, I'm a big fan of quiet engines that go super fast and get super gnarly when you romp on the gas XD
@@Avetho yeah sucks to have a loud ass boat and thats also slow
Yet its probably loud as hell lol
Honestly best sounding K series I've heard so far with that boat and the exhaust you guys did for that. The turbo also is just so good!
it needs an intake pipe routed through the engine cover. fresh air and all the spool noises!
I agree 100%
They all sound horrible, until this!
They definitely did a good job
A jetboat with a JDM heart with a turbo reeling in Cleetus does put a smile on my face. 😊
As suspected. Super Charger gets out front, and Turbo Charger comes back in the big end. Great stuff!
now this is my idea of a fun day on the boat with the boys. you guys literally did roll races and also from a dig. Awesome boys.
Once you hit around 58/59 mph with that jet drive pump you have currently you can easily upgrade the impeller Wheels to something with more surface area and you can upgrade the intake great with one that has larger scoops with a sharper angle to get a lot more mph now that you have a turbo on it. You have to remember when you ordered that jet drive you told them you would be using a stock naturally aspirated k series engine on it to begin with so they sized the impeller for that engine not for one with a turbo so there's plenty of meat on the bone so to speak.
Exactly. Boats respond big with small changes. The hulls on the mini jets are designed for shallow water, rocks, branches, cruising.. it's similar to a ski boat hull that was designed for steady, consistent 35 mph runs. I noticed he trimmed it down to keep it from porpoising on launch but didn't see him re-adjust when the boat got up on plane. Maybe I missed that??
I know my jet bolt breaks up at around 3000 mph.
The only won cuz the other guy wasn't getting traction🥴
Man this video got me so pumped, your jet boat is officially my favorite, right next to the give away boat cleetus had! you guys have built some AWESOME units!
You need to trim you outlet nozzle down a little when you get on plane and swap the inlet gate with a horizontal wing gate to hydroplane up. That will help you increase your speed, allows for a much stronger push.
You guys are absolutely fucking crushing it on content lately!
I grew up on the rivers in Maryland fishing and crabbing had tons of boats, never have i ever seen anything like this boating community. Looks freaking awesome!!
You guys should seriously consider putting together a Honda k engine and jet pump package for people who don't want to go the Sea Doo route. Mini jet boats / Adventure boats are exploding in popularity and your engine pump setup works. I'm sure there's a lot of people out there that would be happy to pay to have that same setup in their new mini jet boat
By the time you factor in the cost of the pump, and the swap the Sea-Doo drop in is less expensive. Plus then you got something which is factory you can resell. Swap hodgepodges don't go for anything even if they're done well.
Like otm said it's considerably cheaper to go the seadoo route and it's a complete setup. Yamaha 1.8 is actually a much better package, stock with a few parts is 350hp but about $6k package vs
BusinessBoys
@Donald Johnson he has a k swap that will last forever and a kick associated jet pump
. Those supercharged seadoo engines are notoriously unreliable. I would take Kyle's boat anyway over Cleetus's.
One of the main things I like about using a Honda Motor in a Mini jet boat I know people that can work on Honda I don't know anyone that's a Sea-Doo mechanic and Honda parts are sold everywhere I think it's the way to go
By the time cleetus is done he is gonna need a set of wheelie bars on the back of his little boat
Amazed your k swaps always seem to work out. But this one is quite useful in the jet boat. Way cool.
This one has balance shafts, much more reliable lol
@@TurboVisBits wdym? The other one does not?
@@MiGujack3 pretty sure they remove them to remove the rotating mass for higher rpm. The jet boat doesn’t live at redline.
Kyle is always on kill, love the progress that he has made. To bring boosted boiz up to that level is amazing. Wyatt has fabricated the path Kyle leading anything is possible. Keep doing what you do!!
Since that manifolds running so cool I would cut that fuel tank in half and put half on the other side with a transfer hose between the two. That'll help it sit more level in the water👍👍
He just needs to put a tank on the other side with a bilge pump that he can fill with water or empty it.
@@kick_then_shift 2 connected fuel cells would be better and simpler. it'll always self balance, and you get more fuel capacity. win-win
@kshepthedrummer there is zero reason to have that much fuel on board of that thing.
@@kick_then_shift Im not saying have it hold 40 gallons of gas, but 2 small cells would be perfect. and when I'm riding my jet ski, my fun time is limited to how much gas I have. and he has a 300-400 hp car engine that hes planning to run E85 in. there's been many times when I headed back to the dock before I was ready to call it a day due to being low on gas. having slightly more fuel than needed is never a bad thing in a boat.
@kshepthedrummer he's got either a 15 or 20 gallon fuel cell already in it. He doesn't need more fuel. Your jetski has what a 6-10 gallon? Lol
Drews air boat is insane, Cleet built it on his channel a while back if anyone hasn't seen it.
Living in the pacific northwest, our fishing boats are the same design as these...whether ib/ob, outboard, or jet. My 17'6" with a heavy bottom and a 70hp suzuki outboard prop will run 43 mph so you arent far off with the added horsetorques and the loss of 30% from the pump! Our boats ride the same btw!
I was litterly drooling looking at the frs while Kyle was talking. wide body boosted and looking badddd. A win to kyle for the jetski boat. So awesome keeep it up
To think how far you guys have come in such a short period of time... You guys are freaking killing it!
Thank you.
its crazy how much of a florida man kyle has become .... like its crazy
Gator skippin and turbskis. Cleeters and Limo Skippys. What more could ya ask for in a adventure. Some of George's hilarious lines would have been a bonus. The little boat is rippin.
12:43 celebrity tours. Here on the right we have Boosted & Clete in their natural habitat.
So proud to see Kyle be a full blown Florida boy 😂
Never seen Kyle so happy about doing 54mph
Florida man, boats, boosted Honda motors making videos inspirational videos and changing the world one video at a time. Gods work guys.
Yoo, didn't know the Twisted Tea shirts were a thing.... Gotta grab one of those lol.
These boats are crazy, be safe out there!
Regarding the ride height you have to remember that there's a massive amount of water getting sucked into the bottom of the boat just like cleeters race boat and on a short boat there's not much you can do to counter that outside of extending the intake down and then you no longer have a river capable boat
unemployed since Nov18th and not looking like anything happening till new years but still willing to toss something at the boys for a chance at the ride. looking for a lil good luck and some motivation for 2023
I’m impressed. Good job boys. Wasn’t sure about the torque but it’s all there and it sounds amazing.
Great quick explanation on the trim. Makes sense now
The jet boat would be so sick setup with anti lag on a button! Be able to spool er up a bit on the hit, now that would be so sick to hear on the water too! 🙌🏻
Wouldn’t be a boosts bois jet boat without some AntiLag!!!
Antilag will bolw up the flapper and likely do a number on the cooling system. Not a good idea.
@@denisohbrien worth a good oL boostedboiz try!
Can always rebuild 😂 I’ve seen anti lag done up on the turbo ski’s don’t see why they wouldn’t be able to accomplish this on the jet boat, same concept
Watching these two channels grow together simultaneously brings a tear to this fans eye. The content we all wanted. Cleet team and boosted boiz having a great time.
Before fasterproms ruined the whole vibe
So it finally happened. Time to put the other impeller on there! Maybe add a speed sensor and make the FuelTech control your trim nozzle if it can be done too. Can't wait to see the airboat go in action!
Honestly I would just keep it it the way she is man! I think you guys did absolutely amazing with this build. So proud of you guys, you guys inspire me.
That superchanger nails you off the line, but as the boost comes up you catch up fast!
Never thought I'd see Kyle excited about 54 mph lol. Awesome video guys.
54mph on the water is pretty fast…
@SirSloop yeah for sure. It's still just funny to me to see him excited about 54 mph. But I completely agree. I had a ski that would run about 65 mph, but it felt more like 120 mph.
@@Adam-nv9zo mine runs about 60. its crazy how fast slower speeds feel when you're on the water lol. I can't imagine what those crazy 1000hp jet skis they were riding a while back feel like
@kshepthedrummer I know right. It probably feels like you're riding a rocket lol
Never really thought about it, but the reason alligators have survived through man's "conquering" of the planet, is partly because they generally leave us alone. Other species might not have had the good common decency, hence they get wiped out.
Kyle you NEED/MUST move your jet-ovater/nozzle trim switch to your steering wheel, where you can hit it with you thumb 👍, for safety, and performance!..from Wyoming USA 🇺🇸 🤠
Tiny Boat Nation might have some great advice on how to fix your trim issue.
Those races were lit 🔥 keep up the great content 💪🏽🏁🏁
The music selection was spot on brother... Love ur vids guys... 🙂👍
There is nothing better than BoostedBoiz showing Cleetus their fastest toys
The supercharger is so responsive you can see the turbo lag in kyles boat just hardly but it there
Y'all have this over 1000hp before we know it even with oil😂
Man this was a sick video. Can’t wait till you can race the jet boat vs air boat!
Those jet boats are pretty awesome for calm water running aside for the odd rapid. I wouldn’t suggest an open ocean run. Not a fan of seeing those gators observing dinner motoring by. Cleetus will be back with an upgrade for sure. 👍👍🇨🇦
I've actully seen videos of people in like the frozen artic hitting huge rapids in these boats
I’d really be more worried about the way the airboat is going to ride in the water than the jet boat😂
Damn that thing is flying, I wonder what the weight difference is from Cleetes
It's gotta be quite a bit. That engine and jet drive has gotta weigh at least twice as much as the small jet-ski setup in cleet's boat, so it's pretty impressive.
These guys can make any thing that can hold a Honda engine work wht a amazing job well done peace love n much blessings can wait to see the truck make its first pass
You guys are the 2 dudes that make shit yourself that is world wide. On your own. Love you Kyle and Wyatt friends who came from nothing and welding class to here beefing Garrett that makes him love you guys even more for doing a build no one has new invention
My two favorites. This boat and the go cart. This is has to be the sickest boat I have ever seen. So curious what the build cost was.
Total cost was around 2900 us dollars
The boat alone is like 6K+ with all the option they put into it. Then slapped a k-series into it and boosted it. And also had it professionally wrapped. I’m guessing like 15K-20K in total? I’m sure I’m way off, but I’m curious as well.
@@mattketner7597 yea the shell was 2200 without shipping.
@@grantlewis7885 isn’t this the “10ft Headwater” model? It’s $4,600 CAD for a complete kit alone. Then they put like all the options I’m sure, like the Lexan Windshield, which is $850 alone. And then the welded hull alone is another $3250 CAD on top. Add the freight shipping cost to North America, and I’m sure you’re looking a pretty penny.
Turn key ready to go they run $40,000 to $60,000. Kits that you weld up are pretty reasonable and the option s dictate the cost. 1 stringer, 4 stringer, type of windshield, the walk through windshield, stomp grate or welded grate, it all adds to the price of the boat. Since they bought a 4 seater, prewelded, with many of the options, I'm guessing around $20,000 without the engine. You can buy used ones ready to go for around $15,000.
Theres also a discount if you buy 2, 3, or more.
I forgot the upper end jetdrive they went with. So I'm probably low at $20,000.
It's a little concerning that there's never any mention of safety upgrades as these rockets keep going faster and faster. I know it feels sissy but just in case of an under water, catastrophic failure, it might be a good idea to have some harnesses or noodles available. Looks super fun though.
They wear fire suites at the track but not lifejackets on the boat. I always thought that was ironic. Lifejackets will save your life just like a seatbelt, harnes, HANS, or cage.
Just look at what happed to Leo from SxSVlog the first time they rode with Cleet. You can never be too careful...
No harness in boats life vests lol harness in water = death
Everyone will immediately perish on impact, but under the seat is a flotation device...
You can't have harnesses in a boat.. if something were to happen and they couldn't get them off they would drown..
@@billypettit7132 Thanks for correcting my boating terminology. My concern remains the same.
SO AWESOME!! This build is so cool and it's making me so excited for the Skippy ( Extra Chunky)
Nice job guys. She is sweet. Can't wait to see airboat adventures with JH😂!
Make sure you got the right jet when you switch to E85 and 20psi, you might get nothing out of it and might even blow shit up if the jet starts cavitating badly
It's all rpm based, as long as they stay under whatever the maximum rpm rating for that pump is they're fine. The housing is designed to flow that rate.
@@otm646 yes but that's attached to the volume and mass of water it's flowing, which determines the HP requirement at whatever given RPM. So what's optimized for this setup won't be optimized for the E85 high boost cuz it'll be able to move a lot more water, but it'll need more pump to keep up the flow. But it's ok, Kyle mentioned something in the video about it, he knows 🤘
You're kicking ass in Florida Kyle so awesome
Great video had a smile on my face the whole time, love the boats!!
The punch through the wall at 3:27 reminded me of Charlie slapping that guy back in the day 😂
It's like Kyle forgets to stay in the throttle during turns
I fear these boats are gonna lead to a terrible disaster. Please be careful boiz! Wear a life jacket, treat boat safety the same as car safety.
Seems like a piston upgrade is in order. Holding that engine at high RPMs for extended periods like that has to make em pretty toasty
Nice job guys, you have to take those wins from Cleetus when you get them.
I'm calling it now. The Jet boat does 58-60 on 18/20lbs on E85.
With which E-85 are You supposing and guessing, 'guestimating' these results ? local, fuel, filling station, 'pump' version "E-85", which is commonly 40% ethanol upt to 55%, in warmer temperatures up to 65% in some locations or proper, true E-85=85% ethanol = racing C-85 or something in between ??
It seems that Your "guestimates" are incorrect - how so ? if currently using 'pump fuel' with 10 lbs boots achieves 54 MPH, and each 1 lb increase of boost increased 1 MPH, then to achieve 60 MPH is 6+ MPH, such the boost would also increase 6+ lbs =>thus, 16 lbs boost would result in 60 MPH, 14 lbs MPH would achieve 58 MPH, 18 lbs boost achieves 62 MPH, 20 lbs boost achieves 64 MPH.
Then adding the improved power with the use of ethanol increases from there, each result including from lower through higher boost levels.
Good Luck
Sincerely
@@newtonfirefly3584 Came back here to say nice prediction. You were right.
@@ForceFed Your reply is appreciated along with its acknowledgement and acceptance.
Though, my comment just conveyed the correct assessment, evaluation and simple calculations.
All The Best, Sincerely
@12:25 You need to talk #CleetusMcFarland into having a jet sprint boat course dug out! He'd get snowbird racers from the whole country down there!
You, and cleetus in a video is just great
18:13 I love that "WUA, Somethings breaking" it just tells a lot about the nature of the job and spirit of kayle. Keep up the great work guys! I am loving these videos and especially how frequently they come.
Random thought, would love to see you guys do an off-road build. SUV or small pickup with enough ground clearance to take off-roading, gotta have awd or 4wd; and of course a k swap!
100% do something to trim the thing to ride on the stern of the hull. Way less resistance and it will give major results for top end without needing extra power. 54mph, yes on the water in a small boat that is proper quick. My bone stock 17 footer with a propeller and a v6 stern drive, it weighs probably 9 times as much, but it will sit on the 4800rpm limiter all day and do 60mph. Only trimmed right. Its a 220hp. Nothing fancy, but its licenced for 7 adults.
Prime example of turbo vs supercharger. Nothing like a supercharger for the instant power but the top end power and the ease of tuning is pretty nice
I absolutely love the Florida boiz getting together.
NGL… Maybe my favorite episode from y’all in a few years 🤙
No don't trim it up more. If your jet drive shoots above the water you are loosing power. Just find the sweet spot on the trim Your boat is bow heavy. I think fixing drag on the hull from the Black rock guard panels will help. Have Wyatt sit in the back on the light side.
Hell yeah! I've been waiting for this video!
Good to see you boys out having fun and living 👌
I think Wyatt needs to get mini jet boat build going but with a vw tdi, a nasty cr 2.0 tdi with like 300 hp would be too cool
Man this thing is rad af guys ... and were I live in nc on the coastline myself I really think I might need to build a lil something like this fam 🤔 😅 then maybe I do a diff engine and we can lime it with u .. maybe one day if I can ever get to that point but keep it rad stay safe and. Build on guys... radical af yal 💪🏽🤙🏽🤘🏼✌🏽🦸♂️🧑🏽🔧😉😜
oh heeeeelllllll yeah! been waitin for this one!
Well done guys, boat is working nicely
Kyle, don’t worry about the RUclips experts. Everyone on RUclips in the comment section is an expert in everything. You do what makes you happy. I don’t understand why people don’t just enjoy the video and leave positive comments or nothing at all. Trust me I don’t agree with everything people do but I try to be polite and offer helpful advice without sounding like a know it all or I just say nothing at all. Keep doing what you do. Most of us appreciate and enjoy your content. 👍🏻
Loving the little jungle music intro 🔥🔥
Aren't you glad you made the move down here? Jet boating in short sleeves in December lol. Welcome to Florida buddy
Nice job boiz...I'd like to know more info on the pitch of the Impeller you're running and whether it's a progressive pitch or not.
Im so happy you and cleeter are making friends now my 2 most fav cartubers are making bonus content lol
Confirmation #6EF8RRCQW
Thank you Jose! hook it up with a cool bundle broski!!! my birthday is on the 16th
Order number 22539
Awesome video guys! The boat is sick!!
add hydraulic bennett trim tabs or classic static ski boat trim tab...the hydraulic are independently adjustable for weight and planning trim....
Now you did it .. Cleets gonna put some nitrous on that thing...
3:18
If you punch a wall in finland, your hand is the thing that breaks
The montage 8-bit obscure Nintendo game music was a nice touch
Man Oh Man are you SERIOUS living the dream love you guys ❤️🇨🇦👍🙏
Both those boats are freaking fast. Would be so much fun. Cheers
badass video! Florida's crazy you dont even need life jackets
I’m so happy you guys moved to Florida! Live Free my brothers!
Digging that little tune at the end. lol
Another banger video good job guys keep it up